BMW Tools & Specialty Equipment for BMW 2 Series F22 (2014+)

The Schwaben Magnetic Camber Gauge measures the Camber angle on the wheel hub or brake disc and allows on-car adjustment to ensure correct wheel alignment. This is a useful tool for setting Camber angles back to pre repair setting after dismantling and re-assembling of the suspension or struts and is an ideal track day companion.

Features:

• Easy to use magnetic gauge attaches to the hub or brake rotor
• Graduations of +/- 6 degrees 
• Comes supplied in a durable storage case
• Measurements are 5" long with a 2" magnetic base

The GB500+ is a powerful portable lithium jump starter delivering 6250 amps, designed to jump-start gasoline and diesel engines up to 45 liters. Its versatility extends to a wide range of vehicles and equipment, including semi-trucks up to class 8, motorhomes, coaches, buses, as well as mining, agricultural, construction, and vocational equipment with 6, 8, 12, and 16 cylinders, and beyond.

Features:

• Introducing one of the most powerful lithium jump starters yet. Designed for the largest, most challenging engine starts ever. With over 6250-amps of starting power, it can jump start gasoline and diesel engines up to 45-liters.
• Safe and easy to use battery jump starter pack without the worry of incorrect connections or sparks. Safely connect to any 12-volt and 24-volt battery with our mistake-proof design featuring spark-proof technology and reverse polarity protection.
• It's commercial in every way. It jump starts almost every type of vehicle and equipment, including semi-trucks (up to class 8), motorhomes, coaches, buses, mining, agricultural, construction, and vocational equipment - 6, 8, 12, and 16 cylinder - and more. Plus, an integrated digital battery voltmeter for enhanced diagnostics.
• Jump starters this powerful typically are enormous and weigh hundreds of pounds, but our high discharge lithium technology makes it the most compact and lightweight design in the world - weighing a mere 24-pounds. And its portable carrying case makes jump starting more convenient than ever.
• It's not just a lithium jump starter but also a portable power bank for recharging smartphones, tablets, and other USB devices, with an ultra-bright 2,200-lumen LED flashlight with seven light modes, including emergency strobe and SOS.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Doing mechanical work, especially when it come to aluminum heads and engine blocks. The constant change in temperature from hot to cold with and engine may cause fasteners to be more difficult to remove and possibly stripping the threads. This tool wasn't designed to make new thread, but instead clean-up the damaged threads.

Features:

• Repairs both internal and external threads
• Used with standard metric sockets and wrenches
• Tap and Die sizes: 6x1.0 / 8x1.25 / 10x1.25 / 10x1.50 / 12x1.25 / 12x1.75 / 12x1.5 mm
• File thread pitch sizes: 0.75 / 1.00 / 1.25 / 1.50 /  1.75 / 2.00 / 2.50 / 3.00 mm

The Foxwell TS7000 Tablet Diagnostic and TPMS Service Tool is designed to elevate your TPMS diagnostics experience to a professional level. This versatile tool serves as your second or third step into TPMS diagnostics, offering a comprehensive range of features for both TPMS and high-level diagnostic functions.

At its core, the Foxwell TS7000 enables you to activate OEM/Universal TPMS sensors, retrieve detailed TPMS sensor data (including sensor ID, tire pressure, temperature, battery condition, and OE part number), relearn 98% of sensor IDs, program FOXWELL T10-sensor for sensor replacement, and test Remote Keyless Entry Key Fobs. 

But that's not all. This tool goes beyond TPMS with advanced diagnostic capabilities such as ABS Bleeding, EVAP system testing, Oil Resets, Fuel Pressure Testing, Oxygen Sensor Testing, and comprehensive Code Reading functionality. With regular hardware and software updates, the Foxwell TS7000 ensures that you stay ahead in tackling automotive issues with precision and efficiency.

Standout Features (How does it standout from previous models, i.e. the T1000/T2000?):

• Will allow you to connect to all sensors at once and view all of their data at the same time
• Can now program sensors by copying through OBD (eliminates need for relearn, see "Programming" in description for details)
• Wireless connection to OBD2 port
• Wireless updates (One Touch Update)
• Larger screen (5.5-inch screen, T2000 is 2.8-inch)
• Updated, larger hardware (32 GB RAM, 5V battery, now offers camera for VIN-reading)
• CAN FD support
• Print TPMS sensor data on PC

More Features:

• Activate 98% OEM/Universal TPMS sensors
• Programs FOXWELL T10 Sensors in 4 Different Ways: Copy by OBD, Copy by Activation, Copy Manually, and Auto Create Sensors
• 3 TPMS Relearning Methods: OBD Relearn, Automatic Relearn, and Stationary Relearn
• Fast Reading Sensor Data: Include sensor ID, tire pressure, temperature, battery, frequency, etc.
• Key Fob Testing Tool: Precisely test 315MHz and 433MHz key fobs to ensure whether it is perfectly running
• Read TPMS Live Data
• Basic Code Reading capabilities using OBDII
• Solid and Rugged Construction: Well-constructed with materials designed to handle harsh work environments
• Intuitive and Easy Instructions: Easy to navigate and operate with clear instructions and detailed user manual
• Free Software Updates for Life
• LIFETIME REPLACEMENT program

Programming:

With this TPMS programming tool, you can program FOXWELL T10 TPMS sensors (T2317833 or T2317834 ) to meet the specifications of a particular vehicle before new sensor installation and relearn. 4 different sensor programming methods are supported by the FOXWELL TS5000 TPMS Service Tool: Copy by Activation; Manual Create; Automatic Create. (Note: TS5000 will only program a replacement sensor if it is a FOXWELL T10 sensor, which can be easily found on our site.)

• Copy by OBD:
  • This method pulls the previously registered sensor ID through the vehicle's TPMS module using OBDII, and will then program the ID to the FOXWELL T10 sensor
  • This eliminates the need for a relearn by combining both steps into one
• Copy by Activation
  • If your original sensor works and can be activated. You could use this method to program a new sensor. It will clone the original ID to the new FOXWELL T10 sensor.
• Copy by Manual Input:
  • If you know the original sensor ID, you can input the ID to program new sensor.
• Auto Create Sensors:
  • If you don't know the original sensor ID or your original sensor was bad, you can choose this method. Install new sensor ID--> program new sensor--> perform TPMS learning and let the car recognize new sensor

Relearning:

The FOXWELL TS5000 TPMS Service Tool can be used as a professional TPMS relearn scanner, to relearn almost all known sensor IDs, which is compatible with 95% of vehicles equipped with TPMS and extremely popular among car repair ships and DIY car owners. To ensure compatibility with different vehicles, 3 types of TPMS sensor relearning are offered:

• OBD Relearn:
  • Usually the most effective relearn tactic, this will allow you to connect the TS5000 to your car wirelessly using the OBDII port and placing your vehicle in a relearn mode.
• Automatic Relearn:
  • For some vehicles, the “Relearn” function can be completed automatically by driving, which makes it quite easy to do a complete set of sensor replacement operations on your own. Be aware that this may require you to drive the vehicle at a certain speed for a designated amount of time for it to relearn.
• Stationary Relearn:
  • TS5000 allows the new TPMS sensor IDs to be transferred without driving a vehicle. You can trigger the sensors when the vehicle is in learn mode by our TPMS Tool TS5000. This will usually require a specific sequence created by the vehicle manufacturer as well, such as pressing the brake a few times, turning the key, etc.

Please note that some vehicles require a combination of these relearning methods, such as needing to drive for a designated amount of time after relearning using OBD. There may also be extra steps your manufacturer uses, so please research your specific vehicle when performing a relearn!

Note:

• Certain functions may be limited from the vehicle manufacturer due to the requirement of a special factory access code. 
  • Pre OBDII vehicles will have limited feature availability
• We recommend purchasing a Bentley Manual to use with your TPMS Tool.
• You will need to register your TPMS tool in order to receive update notice's from Foxwell via E-mail
• Vehicles with 20 pin under hood connector will require T366829  for use 

Support:

For software and hardware support from Foxwell the address is http://www.foxwelltech.com/support/ - Make sure you use the correct address

For after sales issues please contact Nina at [email protected]. Please allow 48 hours for response.

WRENCH SET:

Quality combination wrenches are a must when doing any kind of automotive work.

Features:

• A complete set from 8 to 19 mm 
• Professional quality wrenches in full length feature open end on one end and 12 pt box on the other
• Satin finish provides superior feel, slip resistant grip, easy cleanup and inhibits rust
• Includes sturdy wrench holder for easy storage

INDEXING PRY BAR SET:

Having an adjustable pry bar really comes in handy when working in tight spaces as well as making seal replacement much easier.

Features:

• Three hardened alloy metal bars in 10, 12, and 15 inch lengths, with knurled, non-slip handle grips.
• Push button release at pry bar pivot allows the pry head to rotate through a wide arc and lock in place again when the button is released.
• Packaged in a handy molded case for portability and easy organization.

100 PIECE BIT SET:

All the right bits in one box. The perfect assortment to keep the job going.

Features:

• 10 fractional SAE hex, 9 Torx® tamper-proof, 9 Torx®
• 9 Metric hex bits, 9 slotted bits, 8 Pozi-drive, 8 Phillips, 4 square-recess, 4 tri-wing
• 3 spline, 3 Torq, 3 clutch, wing-nut driver, magnetic bit holder and socket bit holder
• Made of hardened Chrome Vanadium steel for years of dependable use
• Packaged in a handy blow molded case with individually marked bit slots for easy organization

6 PIECE SCREWDRIVER SET:

The Schwaben 6-Piece Screwdriver Set consistently proves its worth over time, delivering exceptional performance across a multitude of tasks. Forged from the unyielding strength of nickel chrome moly, these tools are purpose-built to endure the challenges of consistent use, standing as unwavering companions for a wide spectrum of tasks. Our dedication to your satisfaction is solidified through our LIFETIME REPLACEMENT program, a testament to our promise of keeping this set at your side for as long as you need.

Features:

• Seamless Color Coding: Effortlessly transition between flat head and Philips head screwdrivers with the intuitive color-coded system. Enhance efficiency and eliminate any guesswork.
• Optimal Handling Comfort: Engage in tireless operation with ergonomically designed handles that offer both comfort and precision, especially for intricate tasks.
• Organized Storage: Tucked within a molded tray, these frequently used screwdriver sizes are incredibly portable and thoughtfully arranged, eliminating the frustration of rummaging through tool collections.
• Essential Variety: Painstakingly curated to cater to diverse needs, the set comprises a range of sizes suited for delicate assignments and robust ventures alike, effectively tending to all your requirements.

Includes:

• Molded Tray
• 5.5x100mm flat head screwdriver
• 6.5x150mm flat head screwdriver
• 8x175mm flat head screwdriver
• #1x75mm Phillips screwdriver
• #2x100mm Phillips screwdriver
• #3x150mm Phillips screwdriver

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.