BMW Brakes & Brake Parts for BMW 2 Series F22 (2014+)

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this F3X BMW brake package are all of the OEM equivalent components needed to replace your Front brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

• Textar Front Brake Pads
• Zimmerman Front Rotors
• New Front Wear Sensors
• Brand New Stainless Steel Set Screws
• Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
F3X BMW 328 330 428 430 (w/ M Sport Brakes)
F3X BMW 335 340 435 440 (w/ Standard Brakes)
F22/23 BMW 228 230 (w/ M Sport Brakes)
F22/23 BMW M230 M240 (w/ Standard Brakes)

Reduce weight. Reduce heat. Reduce warping.

ECS Tuning engineered 2-Piece semi-floating rotors offer real-world benefits that can be felt on both the street and track! 2-Piece rotors combine the advantages of weight savings and rapid heat dissipation to provide a rotor superior to stock while preventing warping and extending component life. The reduction of unsprung weight improves handling characteristics under all situations. This reduction in rotational inertia allows for quicker acceleration, decreased braking distances, and more responsive handling.

Features include:

Aluminum hats: To save weight, each rotor ring is bolted to a lightweight aluminum hat made from high-quality 6061 aluminum, and hard anodized with an attractive matte black finish that is both durable and corrosion-resistant. Gray cast iron rings: Long known for its wear resistance and stable friction characteristics, cast iron is favored for brake rotors due to its ability to absorb and dissipate large amounts of heat. 2-Piece construction: Conventional rotors are unable to cope with the stress of drastic heat fluctuations and are prone to warping. ECS 2-Piece semi-floating rotors allow the radial expansion of the rotor ring - preventing warping. Heat treated: Heat treating of ECS 2-Piece rotors makes them stiffer and stronger - for improved performance and further prevention of warping. Drilled and slotted: 2-Piece rotors are cross drilled to promote cross ventilation for improved cooling as well as slotted to clean brake pads and carry away water and brake dust. Cleaner brake pads result in faster, more consistent stopping. Drilled holes are chamfered while slots are machined with a ball end mill - both to prevent cracking that may be present on improperly machined rotors. Overall weight savings: This particular ECS 2-Piece rotor weighs only 20.95lbs compared to a stock rotor (24.45lbs). Lighter rotors reduce unsprung weight and rotational mass to improve both braking and suspension performance. Manufacturing quality: Non-friction ring surfaces, including internal vents, are painted to resist salt and other corrosives. Ground braking surfaces ensure rings run parallel, and pads bed easily. Kit includes the following parts:

Front ECS 2-piece semi-floating cross-drilled and slotted Front ECS EP24 "Enthusiast Performance" Brake Pads Pad wear sensor ECS stainless steel rotor set screws These rotors are compatible with vehicles using the M sport brake system which is also found standard for certain applications.

This is a Genuine BMW FRONT brake rotor/disc (370x30mm) for all F30, F31 F32 F33 and F34 models with either the BMW M Performance brakes or 335/435 with the optional M Sport brakes upgrade. These rotors are dimpled and slotted to improve brake pad feel and give the brakes a sportier and more aggressive look. In addition, they are larger that the standard brake rotors to help in braking performance. These are not a direct replacement for the stock brakes and will only work with the M Performance or optional M Sport brake upgrade.

The M Performance brakes were a dealer-installed accessory that could have been ordered new or installed after the car was delivered. M Performance brakes were larger than stock and had a colored brake caliper (red, yellow, or orange). The M Sport 335/435 optional brakes (option code S2NH or S2NHA) were available as an additional option on top of the M Sport trim package but could also be ordered on their own. They featured the same size brakes as the M Performance accessory but with either blue or unfinished grey calipers. Note that only the 335 and 435 M Sport upgrade used 370mm rotors; the 328i/428i M Sport option used a 340mm rotor. See below for a breakdown of the exact exact models and packages these rotors will work on. And for more information on the brakes for the F30/F32 chassis, see our FAQ page.
 

F30 Brake FAQ Articles

F30 328i Brake Package Differences

F30 335i Brake Package Differences

Brake Rotor Buying Guide

This item fits the following BMWs with the M Performance accessory upgrade:
2012+ F30 BMW 320i 320iX 328i 328iX 335i 335iX - Sedan
2012+ F31 BMW 328i 328iX - Wagon
2014+ F34 BMW 328i 328iX - Gran Turismo
2014+ F32 BMW 428i 428iX 435i 435iX - Coupe
2014+ F33 BMW 428i 428iX 435i 435iX - Convertible
2014+ F36 BMW 428i 428iX 435i 435iX - Gran Coupe

This item fits the following BMWs with the S2NH/S2NHA M Sport brake option:
2012+ F30 BMW 335i 335i xDrive - Sedan
2014+ F34 BMW 335i xDrive GT - Gran Tourismo
2013+ F32 BMW 435i 435i xDrive - Coupe
2013+ F33 BMW 435i Convertible - Convertible

Upgrade your BMW's braking performance with the Turner Motorsport Big Brake Kit, designed for both front and rear enhancements. This comprehensive kit includes oversized four-piston calipers with pads, wear sensors, and hardware for the front, along with dimpled, slotted, vented oversized rotors (370x30) and rotor shield protection plates. The rear upgrade features oversized two-piston calipers with pads, wear sensors, hardware, and rotor shield protection plates. Please note that rear rotors are not included in this kit, and separate part numbers are provided for F30 335i and F30 328i.

• Enhanced Braking Performance: Upgrade to oversized calipers and rotors for improved braking capabilities.
• Comprehensive Kit: Front and rear components included for a complete brake system upgrade.
• Dimpled, Slotted, Vented Rotors: Improve heat dissipation and reduce brake fade with high-performance rotors.
• Rotor Shield Protection Plates: Provide additional protection and durability for your braking system.
• Easy Installation: All necessary hardware included for a convenient and straightforward upgrade.

Elevate your BMW's braking capabilities with the Turner Motorsport Big Brake Kit, ensuring a safer and more responsive driving experience.