BMW Engine Parts for BMW 2 Series F22 (2014+)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

5150 Autosport - Corporate Logo
T#:25241785
Part#: SP-CRS-B58
Ships in 4 Business Days
$ 1,099.99 USD
Free Shipping on orders $49 and up
SP Components is renowned for their premium aftermarket forged H-beam rods, earning a strong reputation in the industry. These connecting rods, characterized by their lightweight and robust nature, boast an enlarged mating surface that significantly enhances their ability to withstand heavy loads. Specifically engineered to replace BMW part #11248623419 and #11247589671, these rods are tailored for BMW B58 engines featuring a 148mm connecting rod length. In addition to their reliable construction, these rods come equipped with balanced matching weights and include ARP rod bolts. With a robust capacity to endure speeds of up to 8,500 rpm, they are exceptionally well-suited for high-performance applications. Furthermore, these rods demonstrate the capability to meet the demands of high-horsepower forced induction engines generating up to 900HP, providing the added assurance of ARP Connecting Rod Bolts Included.
Show More Show Less
Radium Engineering - Corporate Logo
T#:31059457
Part#: 20-1440
In Stock
$ 549.99 USD
Free Shipping
$ 549.99 USD
Free Shipping
Revshift - Corporate Logo
T#:13957870
Part#: PMM-F3X-80A
Ships in 6 Business Days
$ 399.99 USD
Free Shipping on orders $49 and up
The team at Revshift designed these motor mounts to be the most durable engine mounts on the market! Some key features of the mounts are their ability to be rebuilt and the high-quality polyurethane bushings being ab to be swapped out for harder or softer options.
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:5122265
Part#: VTTFILTERCAPRED
In Stock
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized
Show More Show Less

Revshift - Corporate Logo
T#:22163403
Part#: PMM-F3X-95A
Ships in 5 Business Days
$ 399.00 USD
Free Shipping on orders $49 and up
The team at Revshift designed these motor mounts to be the most durable engine mounts on the market! Some key features of the mounts are their ability to be rebuilt and the high-quality polyurethane bushings being ab to be swapped out for harder or softer options.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:5122279
Part#: TRIPLECAPBLK1
Ships on Oct 13, 2026
$ 220.99 USD
Free Shipping
$ 220.99 USD
Free Shipping
Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.
Show More Show Less

Mishimoto - Corporate Logo
T#:389788
Part#: MMBCCN20N2612CB
In Stock at Vendor
$ 278.95 USD
Free Shipping
$ 278.95 USD
Free Shipping
il venting and circulation continues to be a problem on BMW engines and the N20 engine is not immune from this. The existing stock system does a poor job of separating fluid and vapor and this leads to an oily film or even small pools of oil throughout the turbos and intake. Performance issues are caused by oil sneaking by the ring seals and is coating the intake piping, intercooler, intake valves, and other critical areas. The problem is worsened with higher boost levels. Oil is excellent for lubricating moving parts but terrible when it gets into the combustion chamber, effectively lowering the octane rating and reducing performance. Our own shop has gone the extra step and offers media and chemical blasting of the intake valves to strip away the oily buildup we have seen. Our shop also strongly recommends an oil catch can be installed in the line for the crankcase vent. The oil catch can traps oil as it leaves the valve cover and holds it in a canister. This catch can is located on the cooler side of the engine where the oil will condense easier and stay in the can. Whatever minimal vapors are left over in the oil is then vented back through the canister and into the intake where it is safe to be burned up in the engine or recirculated back through the system again. This is the way the system was designed! At each oil change simply unscrew the canister and empty the trapped oil with your regular used oil. Installing one of these will avoid costly repairs in the future and help maintain your boost and performance. It's one of the smartest modifications you can make because it demonstrates a well-thought out tuning strategy and care for the condition of your engine. The Mishimoto Oil Catch Can is made from aluminum and with a stealthy black anodized finish. It installs on the cooler side of the engine with a dedicated bracket and new oversized vent lines. The location is key as heat will evaporate the oil and send too much vapor back into the engine (where cooler air will turn it back into fluid). Note: Since the crankcase vent system is considered part of the overall emissions system, installing this may be a violation of local, state, and federal laws. While exemptions are made for track/race and off-road use, check with your local state inspection facility on using this in street-driven vehicles. This item fits the following BMWs with the N20 or N26 turbo engine: 2014-2016 F2X 228i 228i xDrive 2012-2016 F3X 320i 320i xDrive 328i 328i xDrive 428i 428i xDrive WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less
MMX Performance - Corporate Logo
T#:45039725
Part#: MMR20-1004FK
Ships in 3 Business Days
$ 1,227.99 USD
Free Shipping
$ 1,227.99 USD
Free Shipping
The centerpiece of this MMX kit is the UK-made CNC-machined one-piece crank hub, created from billet EN36 steel that's heat-treated with a 0.75mm case hardening, making it incredibly strong and durable. Included are four aerospace precision-machined dowels that mechanically lock the hub to the end of the crank itself, plus a brand new OE bolt. Installation of these dowels is certainly not a DIY job. But, to make the job easier for the professionals, ensuring that the required crank modifications are made safely and accurately, the MMX kit also includes a full installation jig that includes a bolt-on drilling guide, a location bolt for this guide, plus an HSS rolled high-speed drill bit. Together, the single-piece design combined with the four-pin location ensures that there is simply no way that the friction plates can ever slip. With the new OE crank bolt tightened appropriately, this delivers a transformational improvement in reliability and peace of mind versus the OE version. Also included is the MMR Crank Bolt Capture Plate. This adds one additional layer of defense, preventing the crank bolt from being able to back out and loosen over time, ensuring everything is tightly held together as intended.
Show More Show Less

Motiv Motorsports - Corporate Logo
T#:29234303
Part#: 900.1012
Ships in 5 Business Days
$ 140.00 USD
Free Shipping on orders $49 and up
Required when installing a Motiv ReFlex Lite to your inline-4 powered BMW! Includes x4 injector leads and direct, plug-in adapter to the ReFlex Lite Control Unit!

Burger Motorsports - Corporate Logo
T#:21045480
Part#: BMS-TLID
In Stock
Starting at $ 39.00 USD
Free Shipping on orders $49 and up
Starting at $ 39.00 USD
Free Shipping on orders $49 and up
These billet CNC replacement aluminum oil thermostat lids and caps are an excellent way to add some color and style to your N54 N55 S55 engine bay. Anodized black, red or blue. Easy to install and made in the USA. Can be used with or without the BMS Sport Oil Cooler Valve.
Show More Show Less
ARP Head Stud Kit - BMW N55/S55
N55 Engines must be drilled & tapped for proper installation
5150 Autosport - Corporate Logo
T#:23416542
Part#: ARP-HSK-S56-CA
Ships in 1-2 days
$ 999.99 USD
Free Shipping
$ 999.99 USD
Free Shipping
ARP - Corporate Logo
T#:4309
Part#: 100-9942
In Stock at Vendor
$ 202.99 USD
Free Shipping
$ 202.99 USD
Free Shipping
We highly recommend using a stretch gauge when installing rod bolts and other fasteners, where it is possible to measure the length of the fastener.


Vargas Turbo Technologies - Corporate Logo
T#:591365
Part#: VTT-B58-GC-1
Ships on Oct 13, 2026
$ 1,858.99 USD
Free Shipping
$ 1,858.99 USD
Free Shipping
This kit is a simple drop in stock replacement that will take your B58 to the next level. Supports up to 600whp.
Burger Motorsports - Corporate Logo
T#:588633
Part#: OILVALVE-RED
In Stock
$ 59.00 USD
Free Shipping
$ 59.00 USD
Free Shipping
This simple engine oil cooler valve from Burger Motorsports increases flow to your fender mounted engine oil/air heat exchanger resulting in lower engine oil temperatures and more consistent performance during heavy throttle. Less restrictive than the spring-loaded units. Installs in minutes and is fully reversible. CNC machined for a precise fit and anodized for protection. Made in the USA. Requires BMW's external sport engine oil cooler which is standard on most 2008+ models, optional on 2007 E9x models. FEATURES AND BENEFITS Easily lower engine oil temperature Stock oil cooler will work more efficient More consistent performance CNC Machined for a perfect fit Made in USA
Show More Show Less
Spline Lock Crank Hub Solution
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:8061334
Part#: VTT-N55-CRANKHUB
Ships on Oct 13, 2026
$ 818.99 USD
Free Shipping
$ 818.99 USD
Free Shipping
Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The product comes with a 1-year unlimited mileage warranty from manufacturer defects.
Show More Show Less

Fuel-It! - Corporate Logo
T#:17106920
Part#: BMW-B58HPFP-A01
Ships on Oct 14, 2026
$ 1,499.00 USD
Free Shipping on orders $49 and up
$ 1,499.00 USD
Free Shipping on orders $49 and up
Introducing the new B58 BMW HPFP upgrade kit from Fuel-It! Replaces your factory high-pressure fuel pump with a higher capacity pump capable of supporting 30% more flow with Stage1 or 60% more flow with Stage2! Includes all required installation hardware for a clean plug and play install. Includes: Upgraded High-Pressure Fuel Pump (HPFP) Billet Adapter Plate Billet Center Alignment Tool Low-pressure Line (Triple lined crimped fittings PTFE/SS/Nylon Braided) Custom Harness and Hardware
Show More Show Less

Ignition Projects - Corporate Logo
T#:1637696
Part#: IP-A122609
Ships in 6 Business Days
$ 1,055.00 USD
Free Shipping
$ 1,055.00 USD
Free Shipping
Ignition Projects is a Southern California based company that specializes in innovative ignitions products. Their mission is to develop stronger ignition systems in order to optimize engine performance and improve emmissions/consumption. All of their products are developed and manufactured here in Tustin, CA, right here in the US!
Show More Show Less
Motiv Motorsports - Corporate Logo
T#:29234311
Part#: 900.1013
Ships in 5 Business Days
$ 155.00 USD
Free Shipping on orders $49 and up
Required when installing a Motiv ReFlex Lite to your inline-6 powered BMW! Includes x6 injector leads and direct, plug-in adapter to the ReFlex Lite Control Unit!

N20 Stage 1 Turbocharger upgrade - New
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:28770031
Part#: VTT-N20-STG1-NEW
Ships on Oct 13, 2026
$ 1,519.99 USD
Free Shipping on orders $49 and up
WHP Level supported (with proper fuel, upgrades, and tuning) Stock – 350WHP Our VTT N20 Stage 1 upgrade consists of a brand new N20 turbo, custom cast and manufactured for VTT, this is coupled with a VTT custom reverse billet 9-blade compressor wheel, and a brand new 9-blade high-flowing turbine wheel. Turbo upgrade is a complete bolt-on with no changes to water or oil lines and is undetectable by the dealership. Replace that old worn out N20 turbocharger with the latest and greatest technology from Vargas Turbo Technologies!
Show More Show Less
Ignition Projects - Corporate Logo
T#:1637693
Part#: IP-A122413
Ships in 6 Business Days
$ 695.00 USD
Free Shipping
$ 695.00 USD
Free Shipping
Ignition Projects is a Southern California based company that specializes in innovative ignitions products. Their mission is to develop stronger ignition systems in order to optimize engine performance and improve emmissions/consumption. All of their products are developed and manufactured here in Tustin, CA, right here in the US!
Show More Show Less

N55 Stage 1 Turbo Upgrade
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:398009
Part#: N55-STG1
Ships in 10 Business Days
Starting at $ 1,549.65 USD
Free Shipping
Starting at $ 1,549.65 USD
Free Shipping

Vargas Stage 1 N55 turbo upgrade is good up to 425whp with proper tuning and high grade fuel. Vargas N55 turbo is an all-new turbo specially made for Vargas. They build it with a billet compressor wheel of their own design and a stock turbine. It will accept all of the stock water and oil lines and the original diverter valve (upgraded DV is recommended). This kit is a direct bolt-on replacement for the original turbo and necessary if you want to start making big power from the N55.

The stock plastic diverter valve and chargepipe is the weakest point for boost leaks (the plastic cracks). Vargas Turbo recommends upgrading it to a stronger DV design. The aluminum DV designs will hold up to just about any boost level currently available.

Vargas Turbo Technologies has been in business since 1979, offering rebuilt and re-engineered turbo solutions. For the BMW market, they identified a need for both cost-effective turbo replacements and proven turbo upgrades. It's recommended that the rest of the system be upgraded to handle your tuning goals. The final Vargas rebuilt turbos are better than the factory rebuilds and at a lower cost!

Oil Recommendation - modern engine oil is formulated for emissions and to be environmentally friendly. The additives in current oil lowers the oil's ability to withstand high temperatures and stresses, lowering its shear strength and its lubricating properties. Vargas recommends oils with high ZDDP (zinc and phosphorus) content that will better protect and cool the turbo bearings. Examples of high-zinc oils are Red Line Race, Red Line Euro, Motul 300V Racing, Joe Gibbs Racing, Valvoline VR-1 oil, and most Diesel-spec oils that you can buy off-the-shelf. Some oils, especially the Race type, will need more frequent oil changes and may be harmful to catalytic converters.

WHP rating: 425. This rating is used to compare various stage of Vargas turbo kits. There is no advertised horsepower gain with this kit as it depends on your other mods and tuning. The rating is provided as a reference to use in your tuning planning. Custom tuning is recommended to match thIS turbo to your existing mods and upgrades.

Show More Show Less

Vargas Ignition Coil Kit (Red) - B58/B48/S58
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:5309604
Part#: VTT-COIL-B58-RED
Ships in 6 Business Days
$ 222.99 USD
Free Shipping
$ 222.99 USD
Free Shipping
Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for the B58. VTT B58 Coils are tested against a factory Bosch B58 coil. The VTT performance matches or exceeds the factory B58 Bosch Coil. The coils are offered in a choice of black, red, and blue.
Show More Show Less
Innovate Motorsports - Corporate Logo
T#:22558994
Part#: INN3904
In Stock at Vendor
14% off MSRP $ 313.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 269.00 USD
Free Shipping on orders $49 and up
14% off MSRP
$ 313.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 269.00 USD
Free Shipping on orders $49 and up

Introducing the Innovate Motorsports MTX Digital Series "Dual Function" Gauges – now available! These 2 1/16" (52mm) gauges come with interchangeable faceplates and bezels, locking connectors for simplified installation, and MTS serial connections for seamless integration with other Innovate devices for data logging.

DISPLAY RANGE

  • Ethanol Content %: 0-100%
  • Temperature: -40-257 °F (-40-125°C)

KEY FEATURES

  • Ethanol Content
  • Error reporting for ethanol content sensor (Digital Display)
  • Fuel Temperature
  • Customizable exterior LED display
  • Programmable exterior LED color options
  • Selectable unit of measure in °F or °C
  • Programmable fuel temperature warning (outer LED)
  • 2-Configurable analog outputs
  • Ethanol Content: 0v = 0%, 5v = 100%
  • Fuel Temperature: 0v = -40 °F, 5v = 257 °F (-40-125°C)

MTX-D: Ethanol Content Percentage & Fuel Temp Gauge Kit includes Gauge (Black Faceplate, Black Bezel), Silver Bezel & White Faceplate, Harness, Program Cable (Serial), Ethanol Content Sensor, Quick Start Installation Guide.

Please note that this is a universal fitment gauge, and installation may vary depending on the vehicle.

Show More Show Less
Bootmod3 - Corporate Logo
T#:33746522
Part#: BM3FFKTF55
Ships on Oct 13, 2026
$ 599.00 USD
Free Shipping on orders $49 and up

We are proud to bring out this truly awesome product that makes getting the required Flex Fuel hardware on your BMW and A9X Supra with incredible ease and minimal effort, in your own driveway.

Our kit is entirely plug-and-play with the factory vehicle harness. No cutting or splicing of OEM wiring/connectors. It installs in minutes and can be removed without a trace on the car!

Our team used SolidWorks to design a Flow Optimized Flex Fuel Sensor Adapter (FFSA) to ensure fuel flow is unobstructed and with no added pressure drop at full fuel pump flow from the fuel tank to your motor when our kit is installed. This is important when pushing the factory fuel system with all the power Ethanol can provide over petrol!

Flex fuel sensor housing is designed to neatly install into the factory BMW fuel hat location.

Flex Fuel Sensor Adapter also contains two 1/8 NPT ports that allow installation of an auxiliary Fuel Pressure sensor for vehicles that don’t come with an OEM one from the factory for future use. Depending on fitment, either port can be used.

Install the bootmod3 Flex Fuel Plug and Play Kit and flash your flex fuel enabled bootmod3 OTS MultiMap or Custom Map in minutes and you’re off to the races never worrying about alcohol/petrol blend % in your fuel tank. It does not get better or easier than this!

bootmod3 FlexFuel Plug and Play Kit:

  • Minutes to install at home as opposed to hours at a shop with car up on lift fabricating/cutting into factory fuel lines and splicing/cutting/pinning into OEM electrical
  • 4+ hours in time/cost savings to get going on Flex Fuel as compared to most other kits that require making custom fuel lines, fittings and custom wiring! 
  • Fully reversible/removable and back to stock without a trace in minutes
  • Custom 3-piece Aluminum-6061 Flex Fuel sensor adapter with built-in sensor bypass to allow for obstruction free fuel flow made to fit in the vehicle factory fuel hat area below the rear seat
  • All connecting points sealed with fuel safe Viton o-rings
  • Flex Fuel Sensor Adapter housing provides additional 1/8 NPT ports for optional Fuel Pressure sensor addition to vehicles without a factory one for bootmod3 CustomROM v2 support
  • CANBUS Enabled Ethanol Content Analyzer (ECA) that integrates with bootmod3 CustomROM for complete and seamless conversion of your BMW to FlexFuel for bootmod3 Flex Fuel enabled OTS MultiMaps and custom tunes with your bootmod3 tuner of choice
  • Power/CANBus 4-wire plug and play harness
    • 100% Fully Plug and Play harness to the BMW Fuel Controller connectors (EKP3) on S55, N55 vehicles
    • 100% Fully Plug and Play harness on the BMW Body Domain Controller (BDC/FEM) connector on Gen1 F-series B48/B58
  • Continental Flex Fuel sensor 3-wire harness
  • Custom Aluminum-6061 CANBus Enclosure for the bootmod3 ECA board
  • Custom, kink-free teflon braided line allowing plug and play installation with the OEM fuel hat and factory 5/16” or 3/8” fuel feed line. No cutting or new lines required.
  • -6 AN fitting by Racetronix

OEM FUEL HAT LOCATION KIT IS INTENDED FOR OEM FUEL PUMP AND ASSOCIATED WIRING. ANY VARIATIONS TO FUEL LINES OR FUEL PUMPS MAY NOT BE COMPATIBLE. USE THE ENGINE BAY INSTALLATION KIT WHERE AVAILABLE INSTEAD.

Show More Show Less


Pure Turbos N55 Stage 2 Turbo Upgrade - BMW N55 3.0L w/ PWG
For vehicles with production date up to 07/2013
For vehicles with pneumatic waste gate (PWG)
Pure Turbos - Corporate Logo
T#:578272
Part#: PURE-N55-0001KT
Ships in 5 Business Days
$ 2,906.99

This product was last offered at the strikethrough price on
07-14-2026

$ 2,800.00 USD
Free Shipping
$ 2,800.00 USD
Free Shipping
As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight six produced, but Pure Turbos has been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. Looking for massive gains out of your N55 powered BMW? This Stage 2 turbo upgrade kit from Pure Turbos can allow you to achieve over 500whp reliably with supporting modifications! This price includes a $300 core charge that is refunded once we receive your rebuildable core. This upgrade kit features: Upgraded high flow turbine wheel Upgraded point-milled billet compressor wheel Dual oil seals on both compressor and turbine Large diameter 360 thrust upgrade Extensive turbofold modifications and machining Direct fit, as OEM, as these utilize OEM housings Featuring a limited 1 year warranty. For vehicles with pneumatic waste gate (PWG)
Show More Show Less
5150 Autosport - Corporate Logo
T#:25241790
Part#: B58-S-203-4705
Ships in 4 Business Days
$ 399.99 USD
Free Shipping on orders $49 and up
This ARP2000 Head Stud Kit 203-4705 is designed for the turbocharged inline 6-cylinder B58 engines found in various BMW chassis and the Toyota GR Supra A90/A91. As you increase the power output of your engine beyond its factory specifications, the head and block may start to separate, causing factory bolts to stretch and fail. ARP Head Studs are stronger than factory bolts, ensuring your race engine stays together even under extreme conditions.
Show More Show Less
VRSF - Corporate Logo
T#:5844256
Part#: 10301060
Ships in 3 Business Days
$ 119.99 USD
Free Shipping
$ 119.99 USD
Free Shipping
These high flow intake inlets are constructed from high quality, tig welded brushed aluminum. This upgraded inlets is the most cost effective solutions for anyone looking to replace their restrictive factory inlet. Unlike other available upgrades, the VRSF features a CNC’d aluminum flange that offers a larger overall inside diameter which not only increases flow but decreases back pressure. Our high flow inlet kit includes everything necessary to replace the restrictive stock intake inlet with our high flowing 2.5″ aluminum inlet. This kit will work with any and all available intakes as well as any upgraded turbo that is compatible with the OEM intake. This kit works with both RHD and LHD models as well as XI their variants.
Show More Show Less

Mishimoto 19 Row Universal Oil Cooler
For custom applications only. Not a direct bolt on.
Mishimoto - Corporate Logo
T#:378414
Part#: MMOCUL
In Stock at Vendor
$ 536.99 USD
Free Shipping
$ 536.99 USD
Free Shipping
Even under optimum driving conditions increased oil temperatures will cause a drop in pressure and will decrease the ability for your engine to be properly lubricated. With this new oil cooler, you can keep your oil temperatures down for optimum driving conditions. The kit includes four-feet of stainless braided line, adapter fittings, and oil filter sandwich adapter. Rows: 19 Overall Dimensions: 13" x 5.5" x 2" Core Dimensions: 11.25" x 5.5" x 2" Braided Hoses: 4ft .75 inch & 4ft 9 inch Braided Hose Fittings: -10AN Sandwich Plate Fittings: -10AN WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less

SnowPerformance - Corporate Logo
T#:589560
Part#: SNO-40201
In Stock at Vendor
$ 74.99 USD
Free Shipping on orders $49 and up
Installs easily for an accurate boost reading every time.
F3X/F2X - B58 EKP PNP Cooler Kit
A Must For Cars With Upgraded LPFPs
Arc Terminator - Corporate Logo
T#:26471615
Part#: AT224F22BLA501B5
Ships in 2 Business Days
$ 44.99 USD
Free Shipping on orders $49 and up
A Must For Cars With Upgraded LPFPs The full plug-and-play EKPM3 cooler kit is designed specifically for F22/F30/F31/F34 BMWs using an EKPM3 fuel pump control module. This is recommended for anyone using a low-pressure fuel pump that is larger than the OEM fuel pump. We designed this kit with the help of Island Racewerks. The cooler housing is designed to fit over the EKP module just like the OEM housing and fits with plenty of room in the stock EKP location. The housing is 3D printed using durable PLA+. The full kit is printed and assembled in the U.S.A. by Arc Terminator LLC. Full Kit Contents: 1x EKPM3 Cooler Housing With 5015 Fan 1x 14x14x6mm Heatsink With Thermal Tape 1x 14x9x5mm Heatsink With Thermal Tape 1x 9x9x5mm Heatsink With Thermal Tape (EKPM3 Kit) 4x 4" Zip Ties 1x Alcohol Wipe 1x 2 Amp Mini Blade Fuse Why this kit exists: The EKPM3 and EKPM2 have been shown to overheat and cause vehicle shutdown issues when larger fuel pumps that draw more current than OEM are used. This shutdown comes from critical components on the EKPM3 and EKPM2 overheating when larger current draws are coming from the fuel pump. The PNP kit comes with heatsinks for the most heat-sensitive and heat-producing components in the EKPM3 / EKPM2 to further increase cooling effectiveness. When paired with a potent 5015 blower fan that directs a large amount of airflow through the cooler housing, the EKPM3 / EKPM2 stays significantly cooler, which prolongs the life of the module. We also recommend anyone using a larger fuel pump than OEM to properly code their EKP module with Pro-Tool's built-in "Voltage Fix" feature.
Show More Show Less

Pure Turbos N55 PURE750 Turbo Upgrade - BMW N55 3.0L w/ PWG
For vehicles with production date up to 07/2013
PWG models only
Pure Turbos - Corporate Logo
T#:13957911
Part#: N55PURE750PWG
Ships in 5 Business Days
$ 3,107.99

This product was last offered at the strikethrough price on
07-13-2026

$ 3,107.00 USD
Free Shipping on orders $49 and up
$ 3,107.00 USD
Free Shipping on orders $49 and up
These PURE750 turbos from Pure Turbos are sure to give your car the extra oomph you're looking for! With easy installation and a stealth stock appearance! The craziness pursues with the possibility of 608whp with E30 and meth running 25psi but those numbers could reach upwards of 650+ with other upgrades! crazy. we know, which leaves this as one of the best stage 2 options for your N55!
Show More Show Less
DeatschWerks - Corporate Logo
T#:5389791
Part#: 9-401-1001
In Stock at Vendor
$ 239.00 USD
Free Shipping
$ 239.00 USD
Free Shipping
The DW400 surpasses the 400LPH benchmark by delivering an industry leading in-tank flow of 415LPH at 40psi. Even more importantly, the DW400 delivers 31% more flow than its nearest competitor, the Walbro 450 "e85", at pressures between 70 and 100 psi. The DW400 has a 46mm diameter width and is compatible with pump gas, e85, and race fuels. The pump is also compatible with pulse width modulated pump drivers. The pump ships with a universal fitment kit which includes fuel hose, clamps, electrical harness, and filter. As with all DW products, the pump is warrantied for 3-yrs to the original purchaser.
Show More Show Less

Ignition Projects - Corporate Logo
T#:1637697
Part#: IP-A122613
Ships in 6 Business Days
$ 1,055.00 USD
Free Shipping
$ 1,055.00 USD
Free Shipping
Ignition Projects is a Southern California based company that specializes in innovative ignitions products. Their mission is to develop stronger ignition systems in order to optimize engine performance and improve emmissions/consumption. All of their products are developed and manufactured here in Tustin, CA, right here in the US!
Show More Show Less

Vargas Ignition Coil Kit (Black) - N5x
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:5309609
Part#: VTT-COIL-N5X-BLK
Ships on Oct 13, 2026
$ 167.99 USD
Free Shipping
$ 167.99 USD
Free Shipping
Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:390086
Part#: N55-STG1-PWG-NEW
Ships on Oct 13, 2026
$ 1,254.00 USD
Free Shipping
$ 1,254.00 USD
Free Shipping
BMW N55 Stage 1 Turbo Install Kit
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:15677573
Part#: VTT-N55-INSTL-2
Ships on Oct 13, 2026
$ 74.99 USD
Free Shipping
$ 74.99 USD
Free Shipping
Includes gaskets and O-rings necessary to install your new N55 turbo! If you need studs, manifold gaskets, downpipe gasket, and copper nuts, see T#398463 for the full install kit


Eventuri - Corporate Logo
T#:1871616
Part#: EVE-B58F-CF-ENG
Ships in 6 Business Days
$ 745.00 USD
$ 745.00 USD
Motiv Motorsports - Corporate Logo
T#:29201085
Part#: 200.1058
Ships in 5 Business Days
$ 794.00 USD
Free Shipping on orders $49 and up
Tensility Motorsports has developed a plug and play kit for the ReFlex+ that was engineered to meet our high quality standards. TMS has been approved by MOTIV to manufacturer harnesses and they will not void your warranty on MOTIV ReFlex+ products. With attention to detail in the selection of wiring, production standards, and quality assurance, TMS plug and play harnesses ensure a consistent and reliable installation for a hassle-free experience. Each harness kit includes all the necessary components to install and run a ReFlex+ Advanced I/O Controller on the vehicle it was designed for. The harness is divided into a few separate pieces for ease of installation and a very clean finished look. Main Harness: This section of the TMS harness kit includes plug and play connections to the vehicles Cam, Crank, and TMAP sensors, 6 injector runs for port injection, the ethanol content sensor connector, and DTM connections for all of the auxiliary inputs and outputs. CAN+ Power Splitter: A clean over-molded compact harness that provides a plug and play connection to your vehicles Body Domain Controller. This section is where the kit will get power, ground, and connect to the CANbus network. Auxiliary Cable Pack: Four additional cables are included to simplify future expansions such as additional sensors, methanol, NOS, fuel pump relays, etc. These 8 ft. cables plug directly into the unused ReFlex+ harness auxiliary ports Aux Out 1/2/3 and Aux In 4 (PSI).
Show More Show Less
Dorch Engineering DS15 HPFP Upgrade - N55
For Vehicles Produced Before 12/2013
Dorch Engineering - Corporate Logo
T#:55533476
Part#: DE-55-15B
Ships in 5 Business Days
New Item
$ 1,149.00 USD
Free Shipping on orders $49 and up
$ 1,149.00 USD
Free Shipping on orders $49 and up
The Dorch DS15B High-Pressure Fuel Pump Upgrade is the definitive choice for drivers demanding uncompromised fuel delivery under heavy load. The stock pump simply cannot keep up with the volume required for upgraded turbos
Show More Show Less

Bootmod3 - Corporate Logo
T#:54852022
Part#: BM3FKKFBX8
Ships on Oct 13, 2026
New Item
$ 499.00 USD
$ 499.00 USD

CTS - Corporate Logo
T#:46031873
Part#: TR-1057
Ships in 8 Business Days
$ 2,099.99 USD
Free Shipping
$ 2,099.99 USD
Free Shipping
BMW B58 Gen1 hybrid turbo designed to deliver maximum performance while maintaining OEM fitment and reliability. Built for enthusiasts looking to extract more power from their B58, this hybrid turbo provides increased airflow and efficiency for higher horsepower and torque gains, supporting 700whp+ with the proper supporting modifications.
Show More Show Less
Ferrea - Corporate Logo
T#:28770000
Part#: FER-HPVK-N20-T
Ships in 4 Business Days
$ 619.99 USD
Free Shipping on orders $49 and up

Vargas Turbo Technologies - Corporate Logo
T#:52270240
Part#: GARROUTT4G4045
Ships on Oct 13, 2026
New Item
$ 37.99 USD
Free Shipping
$ 37.99 USD
Free Shipping
Upgrade your turbocharger exhaust connection with the VTT-FAB 86mm V-Band Outlet Flange, designed for the Garrett G40-G45 frame sizes.
Kelford Cams - Corporate Logo
T#:25938619
Part#: KEL-HPVSK-B58
Ships in 4 Business Days
$ 699.99 USD
Free Shipping on orders $49 and up
Kelford's performance valve spring and titanium retainer kit is designed to work with the B58B30 straight-6 engine. Made using high-performance PACALOY™, this kit is sure to offer outstanding performance. This kit is specifically engineered to work well with their Stage 1, Stage 2, and Stage 3 camshafts to provide exceptional quality, reliability, and performance. 90lb seat pressure at 36.5 mm installed height; 193lb at 11.0 mm valve lift Spring coil bind height at 23.6 mm
Show More Show Less

Enthusiast Bundles - Corporate Logo
T#:25042579
Part#: 003239LB01EBKT
In Stock
Sale - Save 14% $ 769.39

This product was last offered at the strikethrough price on
05-05-2026

$ 659.10 USD
Sale - Save 14%
$ 769.39

This product was last offered at the strikethrough price on
05-05-2026

$ 659.10 USD

Elevate your engine bay aesthetics with the stunning gloss carbon fiber engine cover designed for F Chassis BMWs. This Turner carbon fiber engine cover is a quick and transformative upgrade, replacing the plain factory plastic cover on B58 engines. In just minutes, your engine bay's appearance can be revitalized. The cover retains the factory emblem, ensuring a seamless transfer from your original engine cover to the new carbon fiber one. As one of the initial modifications for a new car, this carbon engine cover provides an instant enhancement without the need for extensive disassembly.

Crafted from hand-laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin, the Turner B58 Carbon Engine cover boasts a factory-form fitment derived from a mold of the original engine cover. The gloss clear coat not only enhances its aesthetic appeal but also provides UV protection and extra durability. Explore the range of other carbon fiber pieces from Turner to further enhance your B58.

  • Gloss carbon fiber engine cover for F Chassis BMWs
  • Quick and transformative upgrade for B58 engines
  • Retains factory emblem for a seamless transfer
  • Hand-laid carbon fiber material with pre-impregnated cloth and epoxy resin
  • Gloss clear coat for UV protection and durability
  • Easy installation, enhancing engine bay appearance in minutes

Set of 6 Blue Performance Ignition Coils

Upgrade your engine's performance with the Turner BMW Ignition Coils designed for efficiency and power. Modified for increased energy output, these coils contribute to a faster, more efficient, and consistent burn, maximizing fuel utilization. The blue housing not only adds a signature aesthetic but also signifies enhanced performance. Routine replacement every 40,000 - 60,000 miles is essential for maintaining engine health, performance, and efficiency. Choose Turner Ignition Coils for a strong and healthy engine.

  • Increased performance
  • Direct fitment
  • Signature Turner Blue finish
Show More Show Less

SCE Gaskets - Corporate Logo
T#:5215986
Part#: CR330070
Special Order: No Guaranteed ETA
$ 205.99 USD
Free Shipping
$ 205.99 USD
Free Shipping
The Vulcan Cut-Ring head gasket is designed for use with high static compression or forced-induction engines which are prone to combustion pressure leaks when using typical composite or MLS head gaskets. The hybrid design offers the best properties of composite and steel head gaskets all with out needing added sealant or machining.
Show More Show Less


Precision Raceworks - Corporate Logo
T#:11399223
Part#: 201-0245
Ships in 10 Business Days
$ 164.99 USD
Free Shipping on orders $49 and up
This is a better than OEM quality solution is direct plug and play replacement for the factory line to help you achieve the needs of your high horsepower build on E85.
Precision Raceworks - Corporate Logo
T#:5216003
Part#: 601-0091
Ships in 10 Business Days
$ 889.99 USD
Free Shipping
$ 889.99 USD
Free Shipping
If you plan on upgrading your turbos or increasing power in some other way, it is important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running ethanol blends. Bring your fuel system up to par with Precision Raceworks' F-Chassis High-Performance Fuel Pump Kits! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Precision Raceworks' Stage 3 bucketed fuel pump kit includes 2 Walbro 450 (F90000274) fuel pumps, capable of supporting up to 850whp on 93 octane gas or 800whp on 100% E85! Even better yet? No wires to cut or splice, nothing to assemble, 100% OEM quality, and drop-in ready. Included in the box 2 New genuine OEM fuel pump bucket assemblies (Pre-assembled with genuine Walbro 450 pump) Includes new fuel sending unit (fuel level sensor) New primary and secondary fuel filters Stage 3 Specifications: Horsepower Supported Pump Gas: ~850whp Horsepower Supported 100% E85: ~800whp Aftermarket EKP Required: No **Some European Spec vehicles may require the re-use of the top hat due to differences in emissions requirements.
Show More Show Less