Wagner Tuning Performance Heat Exchanger - Black - BMW F-Chassis B48 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1017107

Part#: 400001002

Back Ordered

Sale - Save 10% $ 1,250.00

This product was last offered at the strikethrough price on
07-06-2026

$ 1,125.00 USD

Add to Wish List

Qty

Sale - Save 10%

$ 1,250.00

This product was last offered at the strikethrough price on
07-06-2026

$ 1,125.00 USD

Add to Wish List

The 2.0 Liter B48B20 and 3.0 Liter B58B30M0 turbo engine of the specified BMW models is equipped with an indirect charge-air cooling circuit. So the cooling of the charged air is not realized by the ambient air as a cooling medium (as usual), but made with its own cooling water circuit. A reduction of the temperature of the cooling water is directly equated with an improved cooling performance of the charged air. This is exactly where the advantages of the WAGNERTUNING upgrade radiator comes into play. The newly developed competition racing core of the WAGNERTUNING high-performance radiator increase the radiator volume of the OEM water cooler by a total of 117 %. The calculated ratio between the inner and outer cooling surface generates a maximum heat transfer and allows at the same time enough airflow for the surrounding components (for example the engine radiator) for its own heat exchange. Furthermore, using an increased amount of cooling water, the entire system thermics can be kept at a lower level over a longer period of time. All WAGNERTUNING radiators are equipped with a heat-conductive anti-corrosion coating to ensure a lasting cooling effect. The plug & play installation of the system is simple and easy to perform (an installation instruction is included as well). Dimensions OEM radiator: 576 mm x 495 mm x 27 mm V = 7,70 Liter A = 2851 cm² Dimensions WT radiator: 524 mm x 468 mm x 68 mm V = 16,70 Liter A = 2454 cm²

Show More Show Less

AFE Black Series Carbon Fiber Cold Air Intake System W/Pro 5R Filter ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:584572

Part#: 58-10004R

Back Ordered

Sale - Save 13% $ 1,203.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,044.05 USD

Add to Wish List

Qty

Sale - Save 13%

$ 1,203.99

This product was last offered at the strikethrough price on
05-27-2026

$ 1,044.05 USD

Add to Wish List

Extremely good looks and performance - only the best for your M2!

aFe Power BladeRunner Intercooler Couplings & Clamps Kit - F30 335 N5...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:391158

Part#: 46-20230AS

Back Ordered

Sale - Save 7% $ 52.00

This product was last offered at the strikethrough price on
06-29-2026

$ 48.10 USD

Add to Wish List

Qty

Sale - Save 7%

$ 52.00

This product was last offered at the strikethrough price on
06-29-2026

$ 48.10 USD

Add to Wish List

Reinforced Silicone:
These couplings feature high temperature 5-Ply polyester reinforced silicone material which meet or exceed SAEJ20 Standard.

Durable Couplings:
Allow for expansion, movement, and extreme vibration between two hard pipes while reducing the possibility of connections coming apart or having your hard pipe or other equipment break.

Note: This coupling kit fits aFe intercooler tube (46-20239-B, 46-20229-B/R, 46-20222-B) Only.

Show More Show Less

BMW Gen 1 B58 Charge Air Cooler Manifold - Custom Finish - Thermal Bl...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:42840098

Part#: 8300C

Back Ordered

$ 4,295.00 USD

Add to Wish List

Qty

$ 4,295.00 USD

Add to Wish List

3MM Silicone Vacuum Hose - Red - 9 Feet

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:370915

Part#: VC03R

Back Ordered

Sale - Save 10% $ 14.99

This product was last offered at the strikethrough price on
07-01-2026

$ 13.46 USD

Add to Wish List

Qty

Sale - Save 10%

$ 14.99

This product was last offered at the strikethrough price on
07-01-2026

$ 13.46 USD

Add to Wish List

Upgrade Your BMW with Forge 3MM Silicone Vacuum Hose - Red - 9 Feet

Upgrade your BMW's vacuum system with the Forge 3MM Silicone Vacuum Hose in Red, a high-quality solution designed for optimal performance and durability. This 9-foot silicone vacuum hose provides superior flexibility and resistance to extreme temperatures, making it ideal for various automotive applications. Engineered with precision, it ensures reliable vacuum pressure for efficient engine operation and component functionality. Whether you're replacing worn-out hoses or customizing your BMW's vacuum setup, the Forge Silicone Vacuum Hose offers reliability and performance you can trust.

High-quality silicone construction for durability
Superior flexibility for easy installation
Resistant to extreme temperatures
Ensures reliable vacuum pressure for efficient engine operation
Ideal for various automotive applications

Car suffering from vacuum leaks? This vacuum hose has a 3mm inner diameter.

Show More Show Less

4MM Silicone Vacuum Hose - Black - 9 Feet

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:370919

Part#: VC04B

In Stock

Sale - Save 10% $ 14.99

This product was last offered at the strikethrough price on
07-01-2026

$ 13.46 USD

Add to Wish List

Qty

Sale - Save 10%

$ 14.99

This product was last offered at the strikethrough price on
07-01-2026

$ 13.46 USD

Add to Wish List

Car suffering from vacuum leaks? This vacuum hose has a 4mm inner diameter.

4MM Silicone Vacuum Hose - Blue - 9 Feet

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:370917

Part#: VC04

In Stock

Sale - Save 10% $ 14.99

This product was last offered at the strikethrough price on
07-01-2026

$ 13.46 USD

Add to Wish List

Qty

Sale - Save 10%

$ 14.99

This product was last offered at the strikethrough price on
07-01-2026

$ 13.46 USD

Add to Wish List

Car suffering from vacuum leaks? This vacuum hose has a 4mm inner diameter.

aFe Power BladeRunner Charge Pipe Upgrade - F3X 335i/435i (Manual Tra...

For vehicles with manual transmission

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:397175

Part#: 46-20237-B

Back Ordered

20% off MSRP $ 695.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 556.00 USD

Add to Wish List

Qty

20% off MSRP

$ 695.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 556.00 USD

Add to Wish List

On turbocharged motors, the intake piping is put under constant pressure while the engine is running, and has to hold that pressure without leaking. Unfortunately the smallest amount of damage or defect on the intake hoses and the pressure can cause a leak, leaving you without proper boost pressure. Replace your leaking pressure pipe and stop loosing boost.

Product Features and Specifications:

+13 HP / +13 lbs. x ft. Torque max gains
Outflows factory intercooler tube by 18%
Retains the factory style throttle body and intercooler quick connections made from 6061-T6 Billet Aluminum
2-1/2" to 3" Cold-Side mandrel-bent aluminum tubing
Powder-coated wrinkle-black for heat resistance
1/8" NPT ports, are provided for connecting pressure sensors or water methanol injection
5-Ply Polyester Reinforced Silicone coupling for strength
Includes premium stainless steel clamps for a secure fit
For use with the factory or aFe intercooler (46-20231)
Includes hardware for a hassle-free installation
For use with manual transmission vehicles ONLY

Show More Show Less

BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815185

Part#: BMSWMITC

In Stock

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA

Show More Show Less

Boost Cooler Forced Induction Progressive Engine Mount Water-Methanol...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:641833

Part#: SNO-20010

In Stock

$ 520.99 USD

Add to Wish List

Qty

$ 520.99 USD

Add to Wish List

Keep BMW boost temperatures in check with the Snow Performance Stage 2 Boost Cooler water methanol injection kit, suitable for all forced induction applications (Supercharged/Turbocharged). This kit enhances performance and cooling, especially beneficial for direct-injected engines, effectively removing carbon build-up on valves.

Suitable for all forced induction applications (Supercharged/Turbocharged)
Simple handheld display for easy injection point adjustment
VC-30 progressive controller with digital display and MAP sensor for precise injection
Adjustable start and full points for optimal engagement
Proportional injection based on boost pressure for accurate delivery
Improves drivability and provides cooling benefits
Recommended for street/strip driven gas forced induction vehicles
OEM approved water methanol injection pump with proprietary heat flange
Extreme Environment 300 PSI UHO pump for durability in elements
100% methanol resistant components for longevity
ACU-SEAL compression fittings for leak-free operation
Increases induction charge density for enhanced performance
Made in the U.S.A. and supports 1,000+ HP

Show More Show Less

#4 Water Methanol Nozzle - 4 GPH

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:13957879

Part#: SNO-N0400

In Stock at Vendor

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

1 Gallon Methanol Tank - Clear/White

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:558165

Part#: 1G-MT-CL

Ships in 6 Business Days

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

Snow Performance Water Methanol Injection Nozzle - 8GPH

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:17040324

Part#: SNO-N0800

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

High Flow Water-Methanol Solenoid Upgrade - Quick-Connect Fittings ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:598937

Part#: SNO-40060

In Stock

$ 73.00 USD

Add to Wish List

Qty

$ 73.00 USD

Add to Wish List

Robust protection for your WMI installation to ensure peace of mind The new and improved Snow Performance Solenoid Upgrade offers 100% safety for all injection systems utilizing a rear mounted reservoir, injection points under vacuum, or installs where injection nozzle is lower than water-methanol reservoir. The solenoid fits in line between the pump and injection point and locks fluid in place when not in use adding safety and peace of mind to any injection system. Can also be used to control a second stage of injection with any VC-50, Stage 3, or MPG-MAX water-meth controller. Features: Robust Methanol Resistant Stainless Steel/Zinc Design High PSI Solenoid Designed to Be Used Between Pump & Injection Point Two Brackets Mounted To Solenoid For Easy Install Pigtail Harnessed Wiring Connections Easy to Read "Flow" Indication 2 Quick Connect Fittings To 1/4" High Temp Nylon Tubing Large 3/16" Orifice For Maximum Flow Through System

Show More Show Less

AEM V3 Water/Methanol Injector Kit (Qty 2)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815166

Part#: 30-3313

In Stock

12% off MSRP $ 129.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 114.99 USD

Add to Wish List

Qty

12% off MSRP

$ 129.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 114.99 USD

Add to Wish List

AEM Electronics water/methanol injection nozzles are available in different jet sizes that allow you to select the appropriate jet for your power level. The nozzles are serviceable and can be disassembled for cleaning. Includes interchangeable swirl generators for 250 500 or 1000cc configurations.

Show More Show Less

SnowPerformance Stage 2.5 Boost-Controlled Water/Meth Injection Kit -...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:380988

Part#: SNO210

In Stock

$ 583.99 USD

Add to Wish List

Qty

$ 583.99 USD

Add to Wish List

The Snow Performance Stage 2 Boost Cooler is the most advanced gauge style water-meth system on the market. This kit includes a boost referenced VC-50 controller, the Stage 2 has the ability to progressively command 2 Hyper-Sonic Nozzles on an independent basis.

Show More Show Less

BMS DDP5800 Water/Methanol Injection Pump

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815186

Part#: BMSDDP5800

Ships in 1 Business Day

Starting at $ 120.00 USD

Add to Wish List

Starting at $ 120.00 USD

Add to Wish List

The Burger Motorsports DDP 5800 water methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. Available with built-in quick connect fittings for 1/4" WMI line or with open 3/8" NPT threads if you plan to use braided lines.

Show More Show Less

Water/Methanol Nozzle - 6GPH

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21374127

Part#: SNO-N0600

In Stock at Vendor

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

AEM V3 Universal Water/Methanol Injection Kit (30-3300)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:369781

Part#: 30-3000

Ships in 2 Business Days

11% off MSRP $ 674.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.95 USD

Add to Wish List

Qty

11% off MSRP

$ 674.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.95 USD

Add to Wish List

Increase the power of your vehicle by utilizing a water/meth injection kit. The purpose of water/meth injection is to reduce combustion temperatures and allow you to run higher boost pressures on pump gas. When using meth injection, pump gas will resist detonation much better because the methanol essentially raises the octane rating of the fuel and will allow you to run much more aggressive street tuning. This AEM kit has more features and components than any other comparably priced injection kits on the market. 1 Gallon tank with built in low level switch Boost referenced progressive controller ?Boost Safe? readiness safety system Check valve integrated into nozzle to prevent unintended fluid flow One injector and two nozzles to cover a wide range of HP levels High Pressure 200psi Recirculation-style pump Progressive Controller: Start Injection Boost 1-11psi. Full Injection Boost 6-39psi LED dash light for system status and low fluid warning 20 ft. of injection tubing

Show More Show Less

N1000 - Snow Performance Water Injection Nozzle

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2317846

Part#: SNO-N1000

In Stock at Vendor

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

High Flow Water Methanol Check Valve

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2317849

Part#: SNO-8CV-QC

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Water-Methanol Dual Nozzle Upgrade - Quick-Connect Fittings

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:598936

Part#: SNO-40040

In Stock

$ 41.99 USD

Add to Wish List

Qty

$ 41.99 USD

Add to Wish List

2 Gallon Low Profile Universal Methanol Tank

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20946755

Part#: 2G-ULPMT

In Stock

Starting at $ 179.00 USD

Add to Wish List

Starting at $ 179.00 USD

Add to Wish List

Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"

Show More Show Less

Red High Temp Nylon Tubing - 20ft

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:640586

Part#: SNO-8087

In Stock at Vendor

$ 20.99 USD

Add to Wish List

Qty

$ 20.99 USD

Add to Wish List

Low Profile Water-Methanol Nozzle Holder 4AN 90* Elbow

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:640584

Part#: SNO-809-BRD

In Stock

$ 20.99 USD

Add to Wish List

Qty

$ 20.99 USD

Add to Wish List

Boost Cooler Stage 3 DI ProLine Water Injection

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21308464

Part#: SP10317PRO

In Stock at Vendor

$ 833.99 USD

Add to Wish List

Qty

$ 833.99 USD

Add to Wish List

The Snow Performance Stage 3 Boost Cooler brings 2D mapped water-methanol injection delivery to your DI (direct fuel injected) and forced induction (turbocharged/supercharged) vehicle. The Stage 3 creates a 2Dinjection map based off boost and fuel pressure sensor input to deliver an extremely accurate amount of water-methanol when the engine needs it most. Bringing fuel pressure into the mix allows the injection curve to be extended past specific boost points for greater range/control. None invasive, the Stage3 Boost Cooler controller is designed to mount on the steering column or the dash so no additional gauge pods need to be purchased and functions as a boost gauge, water-meth controller and fuel system monitor all in one! Proven to reduce the air inlet temperature by up to 100 degrees and increase octane by 25points for maximum HP and cooling . Comes with adjustable Stage 3 water-meth controller, 4AN fittings, and stainless steel braided line to mount pump/tank in engine bay of vehicle.

Show More Show Less

Water Methanol Controller (Boost) - VC-30

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21308475

Part#: SNO-60400

In Stock

$ 184.99 USD

Add to Wish List

Qty

$ 184.99 USD

Add to Wish List

Water Methanol Controller (Boost) - VC-30 is a sophisticated progressive controller that includes a digital display and boost sensor for precise water/methanol injection. Designed for BMW vehicles, this controller adjusts the injection rate based on boost pressure, ensuring optimal performance and cooling.

Precision Injection: The VC-30 proportionally injects water/methanol based on boost pressure, providing accurate delivery for cooling and performance improvements.
Adjustable Settings: Features adjustable start and full points for customizable engagement and delivery curves to meet engine requirements.
Enhanced Cooling: Improves drivability and cooling benefits across a wide range, making it especially beneficial for direct-injected engines.
Carbon Build-Up Reduction: Effectively removes 100% of carbon build-up on valves, enhancing engine longevity and performance.
Digital Display: Includes a user-friendly digital display for monitoring and adjusting settings.

Show More Show Less

Water-Methanol Dual Nozzle Upgrade Stainless Steel Braided Line ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21374131

Part#: SNO-40040-BRD

In Stock at Vendor

$ 62.99 USD

Add to Wish List

Qty

$ 62.99 USD

Add to Wish List

Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:558163

Part#: BMS-WMI

Ships on Jul 22, 2026

Starting at $ 226.99 USD

Add to Wish List

Starting at $ 226.99 USD

Add to Wish List

Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!

Show More Show Less

14GPH Water-Methanol Nozzle

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21374112

Part#: SNO-N1400

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

GAS STAGE 3 DIRECT INJECTION WATER METHANOL CONTROLLER

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:586250

Part#: SNO-60300

Ships in 4 Business Days

$ 416.99 USD

Add to Wish List

Qty

$ 416.99 USD

Add to Wish List

B58 Billet Water Injection Spacer - Gen1 B58 (B58A)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:15744064

Part#: GEN1B58WIS

Ships on Jul 23, 2026

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

Plug-and-play water injection adapter for all Gen1 B58 BMW motors Normally you'd replace the factory charge pipe to install a water/meth kit but in the case of the B58 engine, the factory charge pipe is very sturdy and difficult to remove. So we've designed this plug-and-play adapter for quick installation and removal of BMS dual nozzle water/meth kits without having to replace the factory charge pipe. Simply unscrew three bolts, insert the CNC machined adapter with integrated o-ring in place, and tighten the included longer length bolts, to allow mounting of two meth nozzles with a perfect seal. Includes dual 1/8" NPT methanol bungs appropriately machined for a clean spray pattern which is critical for proper atomization with the B58 motor. For most B58 water/meth applications we suggest dual CM5 nozzles. What's Included: (Gen 1 B58) (1) Billet Spacer (3) M6x1.0x50mm bolts (2) 1/8 NPT bung plugs (2) 90º nozzle adapters

Show More Show Less

Stage 2 Boost Cooler Forced Induction Progressive Engine Mount Water-...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:641841

Part#: 20010-BRD

In Stock at Vendor

$ 625.00 USD

Add to Wish List

Qty

$ 625.00 USD

Add to Wish List

Turner Motorsport presents the Snow Performance Stage 2 Boost Cooler Water Methanol Injection Kit, ideal for all forced induction applications, including supercharged and turbocharged BMWs. With its easy-to-use handheld display screen, this kit allows precise control over injection points and can be conveniently mounted for access. The VC-30 progressive controller adjusts water/methanol injection based on boost pressure, providing accurate delivery for improved drivability and cooling benefits. This kit is recommended for street/strip driven gas forced induction vehicles seeking cooling over a wide range, especially beneficial for direct-injected engines to remove carbon buildup on valves. Key benefits include:

Precise injection control for improved performance
OEM-approved water methanol injection pump for durability
100% methanol-resistant components for long-lasting use
Guaranteed leak-free operation with ACU-SEAL compression fittings
Increases induction charge density and fuel octane levels for full power

Show More Show Less

Stage 2.5 Boost Cooler Forced Induction Progressive Water-Methanol In...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21374123

Part#: SNO-211-BRD

In Stock at Vendor

$ 909.99 USD

Add to Wish List

Qty

$ 909.99 USD

Add to Wish List

Hobb's Switch

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:403482

Part#: ACC-HOBBS

Ships on Jul 23, 2026

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

Snow VC-50 Water Methanol Controller / Boost Gauge (1-50 PSI) ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:556344

Part#: 60500

In Stock at Vendor

$ 312.99 USD

Add to Wish List

Qty

$ 312.99 USD

Add to Wish List

Snow Performance Boost Cooler Stage 2 Direct Port Water/Methanol Inje...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:589550

Part#: SNO-2169-BRD

Ships in 4 Business Days

$ 1,503.99 USD

Add to Wish List

Qty

$ 1,503.99 USD

Add to Wish List

Direct-port injection is the optimal way to run water/methanol and this kit will provide optimal, uniform placement for all six injectors.

Water/Methanol Nozzle - 1.5GPH

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21374121

Part#: SNO-N0150

In Stock at Vendor

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

SnowPerformance Stage 3 Boost Controller - N54 N55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:380432

Part#: 60061

Ships in 4 Business Days

$ 416.99 USD

Add to Wish List

Qty

$ 416.99 USD

Add to Wish List

This stage 3 boost controller will easily upgrade your existing stage 2 kit to stage 3. This digital boost controller gives you the ability to easily dial in your setup - simply set your start and full points, and the software handles the rest. Two buttons allow you to make adjustments. The LCD display shows boost pressure, fuel injector duty cycle, and flow percentage.

Features:

LCD Screen
Digital Variable mapping
Comprehensive Instructions

Show More Show Less

1.25 Gallon Heavy-Duty Universal Methanol Tank

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20946761

Part#: 1.25G-UMT-CL

Ships on Jul 23, 2026

$ 69.00 USD

Add to Wish List

Qty

$ 69.00 USD

Add to Wish List

This tank is thicker and stronger than BMS' basic 1-gallon WMI tank. This tank features an easy fill filler nozzle, an anti-starvation reservoir with a pre-threaded bung for the included 90º compression pump feed fitting, a spill-catcher reservoir around the filler cap, a 2-way vented black plastic cap, and is translucent to allow visually checking the fluid level. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits 1.25 Gallon Tank (4.73 Liters) Anti-Starvation Reservoir Easy Fill filler Nozzle Spill-Catcher Reservoir around the filler cap Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a 90º compression pump feed fitting Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

Snow Performance Stage 3 Boost Cooler (EFI - Port Injection) - Braide...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21374153

Part#: SNO-310-BRD

In Stock at Vendor

$ 833.99 USD

Add to Wish List

Qty

$ 833.99 USD

Add to Wish List

4 Cylinder Direct Port Water Methanol Upgrade - Black Line

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:583754

Part#: SNO-94500-BLK

In Stock at Vendor

$ 208.99 USD

Add to Wish List

Qty

$ 208.99 USD

Add to Wish List

Snow Performance Water Methanol Injection Nozzle - 7GPH

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:17040323

Part#: SNO-N0700

In Stock at Vendor

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Constructed out of 100% methanol resistant nickel plating, the patented Hyper-Sonic design spins the fluid to supersonic levels before forcing it through two venturi shaped orifices to create the Hyper-Sonic micron droplet mist that has become the industry leader in water-methanol technology. Complete with a removable 80 micron filter, the Hyper-Sonic nozzle can be cleaned and re-used on any application. To unlock power hidden within your water-methanol injection system replace your nozzles with Hyper-Sonic nozzles today! (1/8" NPT Threads)

Show More Show Less

82040R - Snow Performance Tee Adapter Fitting

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2317847

Part#: SNO-82040R

In Stock at Vendor

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

Snow Performance Water/Methanol (WMI) Direct Port Injection Plate Kit...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21308451

Part#: 40069-2

Ships in 4 Business Days

$ 742.99 USD

Add to Wish List

Qty

$ 742.99 USD

Add to Wish List

Direct port injection plate with 1.5GPH nozzles for clean WMI installs Snow Performance Direct Port Injection Plates are an easy, clean way to install a high performance water/methanol system. Add it to your existing system WMI system for a boost in capability and reliability, or build your system around it. Includes: Direct Port Injection Plate O-Rings for seal between Injection Plate and head. Required Hardware for Installation Instructions for fitment on N54/N55/S55 style engines. Hardlines plumbed to distribution rail 6 1.5GPH Nozzles installed in plate *Note- For safety, a solenoid must be used when injecting post throttle body to prevent vacuum siphoning

Show More Show Less

Stage 3 Boost Cooler (Direct Injection) - Braided Line

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:14651267

Part#: SNO-320-BRD

In Stock at Vendor

$ 833.99 USD

Add to Wish List

Qty

$ 833.99 USD

Add to Wish List

High Flow Water-Methanol Solenoid Upgrade - 4AN Fittings

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21308462

Part#: 40060-BRD

In Stock at Vendor

$ 73.00 USD

Add to Wish List

Qty

$ 73.00 USD

Add to Wish List

Robust protection for your WMI installation to ensure peace of mind The new and improved Snow Performance Solenoid Upgrade offers 100% safety for all injection systems utilizing a rear mounted reservoir, injection points under vacuum, or installs where injection nozzle is lower than water-methanol reservoir. The solenoid fits in line between the pump and injection point and locks fluid in place when not in use adding safety and peace of mind to any injection system. Can also be used to control a second stage of injection with any VC-50, Stage 3, or MPG-MAX water-meth controller. Features: 100% Methanol Resistant Stainless Steel Construction Comes with (2) 1/8" NPT to 4AN Fittings & Mounting Hardware Can Be Used With All Snow Performance Water Methanol Injection Kits & Upgrades Highest Flowing Water Methanol Solenoid On The Market U.S.A Made

Show More Show Less

High Flow Water Methanol Check Valve (Nylon Line)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21374130

Part#: SNO-8CV

Ships in 7 Business Days

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:590418

Part#: 30-3304

In Stock at Vendor

11% off MSRP $ 247.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 219.99 USD

Add to Wish List

Qty

11% off MSRP

$ 247.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 219.99 USD

Add to Wish List

Upgrade your BMW or MINI with the V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max

This advanced controller optimizes the injection of water/methanol, maximizing power output while ensuring engine safety. With its internal MAP sensor and 35PSI maximum pressure capacity, it offers precise control and reliability under various driving conditions. Experience improved horsepower, torque, and fuel economy with this state-of-the-art controller from a trusted brand.

Enhances performance and efficiency for BMW and MINI vehicles
Maximizes power output while ensuring engine safety
Internal MAP sensor for precise control
35PSI maximum pressure capacity for reliability
Improves horsepower, torque, and fuel economy

Show More Show Less

Billet 100 Micron Water Methanol Filter

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21374114

Part#: SNO-38FIL

Special Order: No Guaranteed ETA

$ 61.99 USD

Add to Wish List

Qty

$ 61.99 USD

Add to Wish List

Project Cars

SELECT YOUR BMW

BMW Intake Parts for BMW 2 Series F22 (2014+)

Sub-Categories

Upgrade Your BMW with Forge 3MM Silicone Vacuum Hose - Red - 9 Feet

Upgrade your BMW or MINI with the V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results