Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components. 

Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

Enhance your vehicle's style with the Alzor Style 030 wheels, designed to catch attention and offer a sleek appearance. The split-spoke mesh design ensures a captivating look, turning heads wherever you go. These wheels are engineered to effortlessly bolt onto your car without the need for modifications, ensuring a hassle-free fit.

• Elevates the appearance with a sleek split-spoke mesh design
• Hassle-free installation without modifications
• Hyper silver finish for a stylish look
• TPMS compatibility for convenience
• VIA certified to meet JWL technical standards for quality and safety

Explore our range of ECS Tuning wheel spacers and lug bolts for an extreme look to complement these wheels.

Elevate your automatic transmission's performance and lifespan with Liqui Moly's advanced cleaning fluid:

• Dissolves problematic deposits and residues for optimized gear shift performance.
• Extends transmission service life by effectively cleaning sludge and lacquer formers.
• Gentle cleaning action preserves rubber and plastic seals.
• Optimizes economical use, ensuring cost-effective maintenance.
• Effortlessly tackles stubborn dirt for a thorough clean.
• Suitable for all automatic transmissions, providing universal compatibility.
• Convenient application with Liqui Moly Gear Tronic for enhanced effectiveness.

Keep BMW boost temperatures in check with the Snow Performance Stage 2 Boost Cooler water methanol injection kit, suitable for all forced induction applications (Supercharged/Turbocharged). This kit enhances performance and cooling, especially beneficial for direct-injected engines, effectively removing carbon build-up on valves.

• Suitable for all forced induction applications (Supercharged/Turbocharged)
• Simple handheld display for easy injection point adjustment
• VC-30 progressive controller with digital display and MAP sensor for precise injection
• Adjustable start and full points for optimal engagement
• Proportional injection based on boost pressure for accurate delivery
• Improves drivability and provides cooling benefits
• Recommended for street/strip driven gas forced induction vehicles
• OEM approved water methanol injection pump with proprietary heat flange
• Extreme Environment 300 PSI UHO pump for durability in elements
• 100% methanol resistant components for longevity
• ACU-SEAL compression fittings for leak-free operation
• Increases induction charge density for enhanced performance
• Made in the U.S.A. and supports 1,000+ HP

We are proud to present you with our long-awaited Turner Motorsport Carbon Fiber N55 Intakes. Like all of our Turner Motorsport products, our N55 intake was CAD Designed in-house to give you the best performing, most beautiful intake we could possibly imagine for your N55 powered BMW. The best part? Our design seamlessly integrates with OEM ducting and stock mounting locations to give you a simple install and an OEM+ fit and finish. We believe this is the way the N55 engine bays should have come from the factory. It’s time to ditch all that plastic.

Our higher flow filter and intake design gave our F30 335i an additional 7 WHP and 14 ft-lbs of torque over stock when we tested on our dyno. Our less restrictive intake design reduced post filter pressure by 0.2 psi over stock, allowing for gains across the entire RPM range - this reduced pressure drop also results in less stress on your N55’s turbo. Our enclosed intake also lowers your intake temperatures by 13 degrees over running an open intake.

We offer our N55 carbon intake in either gloss or matte finish, so you can choose what best suits your engine bay. Select either gloss or matte finish below, and then please select whether or not you are purchasing an intake for a manual transmission vehicle. If your vehicle has a manual transmission, it will require BMW Part # 13907515387.

If you are looking for our Turner Motorsport Open Carbon Intake, see T#568168

Download PDF Installation Instructions

Key Features & Benefits:

2x2 twill weave carbon fiber, clear coated for UV protection

Wrinkle Black Powder Coated heat shield

Ovaled Intake tube for OEM quality fitment

High flow cleanable Turner Motorsport air filter

+7 WHP / +14 lb-ft of torque!

Lowers intake temperatures by 13 degrees over running an open intake.

Special care instructions:

If clear coat gets scratched, reseal affected area with clear coat touch up

To retain UV resistance and protect finish, wax with high quality carnuba wax

Our N55 Carbon Intake fits the following BMWs:
2014 - 2016 F22 M235i, M235i xDrive
2012 - 2015 F30 335i, 335i xDrive
2012 - 2015 F32 435i, 435i xDrive

Want more in-depth details? We’ve got you covered below:

Carbon Fiber Intake Lid:

2x2 twill weave carbon fiber, protected by a clear coat for UV protection

Reduces intake temperatures by 13 degrees compared to running an open intake

Carbon Fiber Intake Tube:

2x2 twill weave carbon fiber, protected by a clear coat for UV protection

Ovaled intake tube design allowing

MAF scaling matches factory intake

MAF sensor flange machined from 6061-T6, black anodized and bonded to the intake tube directly in the center of the tube for accurate temp/airflow reading

Vacuum line port machined from 6061-T6, black andozed and bonded to intake tube

Integrated carbon flange allows secure mounting of intake tube to our heat shield

Heat shield:

One piece design manufactured from 12 gauge 5052 aluminum

Wrinkle black powder coated

Supplied gold heat shield tape

High Flow Air Filter:

Conical high flow cleanable air filer

8 ply oiled cotton gauze

Bellmouth filter flange inlet reduces turbulence and maximizes flow

Replace your cracked or leaking radiator hose to prevent further leaks and potentially catastrophic failure. 

Genuine BMW radiator hoses are always a perfect option when performing maintenance thanks to their high quality and longevity.

This item fits the following BMW Chassis:
F22,F30,F31,F32,F33,F34,F36

Fits BMW Engines including:
N20,N26