BMW 4 Series F32 (2014+)

BMS Aluminum Charge Pipe Upgrade - BMW B46/B48 (Gen1 & Gen2) ...

T#:51848519

Part#: G12B48CP

Ships on Aug 7, 2026

$ 299.00 USD

Add to Wish List

Qty

$ 299.00 USD

Add to Wish List

The BMS Gen 1 B48 charge pipe upgrade is constructed from high-gauge aluminum and features a CNC throttle body and turbo flange for a snug, OEM-style fit. It is completed with a black textured finish to coordinate with the engine bay and boasts two 1/8" NPT bungs ideal for an external boost gauge or methanol nozzles. Also includes a heavy-duty replacement coupler, o-rings, clamps, and all required installation hardware.

Show More Show Less

Blue Thermostat Caps (pair)

T#:54139632

Part#: BMS-TCP-BLU

Ships in 1 Business Day

$ 29.00 USD

Add to Wish List

Qty

$ 29.00 USD

Add to Wish List

JB4PRO Flex Fuel Add On Harness - B58/S58

T#:49822568

Part#: JB4PB58FFAOH

In Stock

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

Take your B58 or S58 build further with the JB4PRO Flex Fuel Add-On Harness—a simple, plug-and-play way to add an ethanol sensor and optional fuel pressure sensor to your JB4PRO setup. Keep your install clean, your wiring organized, and your tune dialed to match every fuel blend in the tank. Why it matters: Plug & Play: Connects directly to your JB4PRO—no cutting or splicing required. Sensor Ready: Supports ethanol and fuel pressure sensors for precise, real-time fueling adjustments. Clean, Safe Installation: Includes a 12 V adapter and inline fuse for hassle-free integration. How it works: This harness links your JB4PRO tuner to your flex fuel hardware. It’s not a complete flex fuel kit—you still need a compatible ethanol sensor—but it gives your JB4PRO the accurate readings it needs to adjust timing, boost, and fueling for E30, E50, or E85 blends.

Show More Show Less

Turbo & Intake Heat Shield - Gen2 B58

T#:49857413

Part#: BMSG2B58THS

Ships on Aug 7, 2026

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance

Show More Show Less

BMW Jack Pad Red - Pair

T#:54388469

Part#: BMWJACKPADRED2

Ships on Aug 7, 2026

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

Lifting your BMW, MINI, or GR Supra should never involve crossing your fingers and hoping you don't crush a rocker panel. Plastic factory jack points are notorious for cracking under the flat, unforgiving surface of a standard floor jack. Stop damaging your car's undercarriage and lift like a pro with this Billet Jack Pad Adapter from Burger Motorsports.

Show More Show Less

BMW 5bar Sensor - B58/S58

T#:49822565

Part#: BMSB585BS

Ships on Aug 7, 2026

$ 139.00 USD

Add to Wish List

Qty

$ 139.00 USD

Add to Wish List

Compatible with BMW B58 and S58 engines Accurate, reliable, and plug-and-play — the B58/S58 5-Bar TMAP Sensor ensures your engine sees the full boost picture, giving your tune the confidence it needs to perform safely and consistently.

Show More Show Less

Turbo & Intake Heat Shield - Gen1 B58

T#:49857410

Part#: BMSB58THS

Ships on Aug 7, 2026

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance

Show More Show Less

BMS Aluminum Charge Pipe Upgrade w/ Blow-Off Valve Kit - BMW B46/B48 ...

T#:51883658

Part#: G1B48CPBOV

Ships on Aug 7, 2026

$ 629.00 USD

Add to Wish List

Qty

$ 629.00 USD

Add to Wish List

Engineered as a direct replacement for OEM BMW Part #13718601683, the BMS Elite charge pipe addresses the structural weaknesses of the factory charge air duct. Utilizing high-gauge aluminum and precision CNC-machined throttle body and turbo flanges, this upgrade eliminates the risk of boost leaks and pipe failure common at higher boost levels.

Show More Show Less

BMW Jack Pad Red - Price Each

T#:54388468

Part#: BMWJACKPADRED1

Ships on Aug 7, 2026

$ 19.00 USD

Add to Wish List

Qty

$ 19.00 USD

Add to Wish List

Lifting your BMW, MINI, or GR Supra should never involve crossing your fingers and hoping you don't crush a rocker panel. Plastic factory jack points are notorious for cracking under the flat, unforgiving surface of a standard floor jack. Stop damaging your car's undercarriage and lift like a pro with this Billet Jack Pad Adapter from Burger Motorsports.

Show More Show Less

Signature Performance Valved Rear Exhaust - Generation 2 - Black Tips...

T#:50934830

Part#: 11-115B

Ships in 3 Business Days

$ 1,177.00 USD

Add to Wish List

Qty

$ 1,177.00 USD

Add to Wish List

True BMW performance, durability, and attractive weight advantages with innovative features place the Active Autowerke BMW F3x 335i exhaust in a class of its own. And now Active Autowerke has developed Gen 2 of this model which has been enhanced to take advantage of the OEM valve system. This system is constructed from 100% Brushed 304-stainless steel and features adjustable brushed Active Autowerke double-walled tips. And now the improved sound becomes more pronounced when the valve is opened by the ECU. Rather than creating a complete exhaust system, Active Autowerke opted for a compact design built in a smaller package to deliver more value. The Active Autowerke F3x 335i Gen 2 BMW Rear Exhaust System provides an increase in horsepower, better sound and appearance making it the choice for the avid BMW enthusiast. The system is a straight-through design providing substantial improvements to gas flow over the factory exhaust. Our innovative muffler can design provides maximum volume with the exhaust valve open for a true sport sound. This exhaust delivers a wide-open sound, a solid 15+hp boost and key gains in the midrange with the valve open while the sound comes out nonintrusive with a rich mellow tone with the valve closed. Just like replacing the BMW factory rear exhaust, the Active Autowerke BMW Performance rear exhaust does it in much the same way, if not better by using a much beefier, heavy-duty TORCA style exhaust clamp. TORCA clamps are known for their strength and sealing capabilities to make that tight seal. Other features like height-adjustable mounting tabs make this exhaust easy to install. Key Features: Large mandrel bent piping for maximum flow Uses factory valve system for maximum exhaust sound Durable, Brushed 100% 304 stainless steel for durability Double-walled signature brushed, black or carbon stainless tips Adjustable Tips with Embossed Active Autowerke Logo Improved power & torque throughout entire RPM band Gains of 12-15 HP over stock configuration Tight seal with use of TORCA style exhaust clamps Height adjustable mounting brackets make installation easy Factory curb weight 27.0 Lbs, Active 335i weighs 22.0 Lbs Fitment for Coupe, Convertible and Sedans Complete illustrated instruction manual Two-year warranty Applications: BMW F30 335i, xi (Sedan) BMW F32 435i, xi (Coupe) BMW F33 435i, xi (Convertible) BMW F36 435i (Coupe)

Show More Show Less

Signature Performance Valved Rear Exhaust - Generation 2 - Carbon Tip...

T#:50934831

Part#: 11-115C

Ships in 3 Business Days

$ 1,377.00 USD

Add to Wish List

Qty

$ 1,377.00 USD

Add to Wish List

True BMW performance, durability, and attractive weight advantages with innovative features place the Active Autowerke BMW F3x 335i exhaust in a class of its own. And now Active Autowerke has developed Gen 2 of this model which has been enhanced to take advantage of the OEM valve system. This system is constructed from 100% Brushed 304-stainless steel and features adjustable brushed Active Autowerke double-walled tips. And now the improved sound becomes more pronounced when the valve is opened by the ECU. Rather than creating a complete exhaust system, Active Autowerke opted for a compact design built in a smaller package to deliver more value. The Active Autowerke F3x 335i Gen 2 BMW Rear Exhaust System provides an increase in horsepower, better sound and appearance making it the choice for the avid BMW enthusiast. The system is a straight-through design providing substantial improvements to gas flow over the factory exhaust. Our innovative muffler can design provides maximum volume with the exhaust valve open for a true sport sound. This exhaust delivers a wide-open sound, a solid 15+hp boost and key gains in the midrange with the valve open while the sound comes out nonintrusive with a rich mellow tone with the valve closed. Just like replacing the BMW factory rear exhaust, the Active Autowerke BMW Performance rear exhaust does it in much the same way, if not better by using a much beefier, heavy-duty TORCA style exhaust clamp. TORCA clamps are known for their strength and sealing capabilities to make that tight seal. Other features like height-adjustable mounting tabs make this exhaust easy to install. Key Features: Large mandrel bent piping for maximum flow Uses factory valve system for maximum exhaust sound Durable, Brushed 100% 304 stainless steel for durability Double-walled signature brushed, black or carbon stainless tips Adjustable Tips with Embossed Active Autowerke Logo Improved power & torque throughout entire RPM band Gains of 12-15 HP over stock configuration Tight seal with use of TORCA style exhaust clamps Height adjustable mounting brackets make installation easy Factory curb weight 27.0 Lbs, Active 335i weighs 22.0 Lbs Fitment for Coupe, Convertible and Sedans Complete illustrated instruction manual Two-year warranty Applications: BMW F30 335i, xi (Sedan) BMW F32 435i, xi (Coupe) BMW F33 435i, xi (Convertible) BMW F36 435i (Coupe)

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

BMS Aluminum Charge Pipe Upgrade - BMW B46/B48 (Gen1 & Gen2) ...

Blue Thermostat Caps (pair)

JB4PRO Flex Fuel Add On Harness - B58/S58

Turbo & Intake Heat Shield - Gen2 B58

BMW Jack Pad Red - Pair

BMW 5bar Sensor - B58/S58

Turbo & Intake Heat Shield - Gen1 B58

BMS Aluminum Charge Pipe Upgrade w/ Blow-Off Valve Kit - BMW B46/B48 ...

BMW Jack Pad Red - Price Each

Signature Performance Valved Rear Exhaust - Generation 2 - Black Tips...

Signature Performance Valved Rear Exhaust - Generation 2 - Carbon Tip...

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results