BMW Suspension Parts for BMW 4 Series F32 (2014+)

BC Racing BR Series Coilover Suspension Kit - 3-Bolt Top Mounts - F32...

For vehicles with 3-Bolt Front Strut Mounts

T#:555821

Part#: I-62-BR

In Stock

$ 1,195.00 USD

Add to Wish List

Qty

$ 1,195.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

For vehicles with 3-Bolt Top Mounts

Specs and Features:

6k Front & 12k Rear Spring Rate
S-Barrel front & Linear rear springs
Valved specifically to spring style and rate
Camber Plate Front Mounts
Rear Rubber Mounts
Black Powder Coated Components
All OE style brackets and mounting for perfect fit
30 Levels of Simultaneous Compression and Rebound Dampening
2 inch minimum and 3+ Inches of total potential drop
Great for Track, Street, and any other conditions

Show More Show Less

BC Racing BR Series Coilover Suspension Kit - 3-Bolt Top Mounts - F32...

For vehicles with 3-Bolt Front Upper Strut Mounts

T#:555822

Part#: I-61-BR

In Stock

$ 1,195.00 USD

Add to Wish List

Qty

$ 1,195.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

For vehicles with 3-Bolt Top Mounts

Specs and Features:

6k Front & 12k Rear Spring Rate
S-Barrel front & Linear rear springs
Valved specifically to spring style and rate
Camber Plate Front Mounts
Rear Rubber Mounts
Black Powder Coated Components
All OE style brackets and mounting for perfect fit
30 Levels of Simultaneous Compression and Rebound Dampening
2 inch minimum and 3+ Inches of total potential drop
Great for Track, Street, and any other conditions

Show More Show Less

BC Racing BR Series Coilover Suspension Kit - F32 F36 428i 430i 435i ...

For vehicles with 5-Bolt Front Upper Strut Mounts

T#:555807

Part#: I-84-BR

Ships in 3 Business Days

4% off MSRP $ 1,245.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,195.00 USD

Add to Wish List

Qty

4% off MSRP

$ 1,245.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,195.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

Specs and Features:

6k Front & 12k Rear Spring Rate
S-Barrel front & Linear rear springs
Valved specifically to spring style and rate
Camber Plate Front Mounts
Rear Rubber Mounts
Black Powder Coated Components
All OE style brackets and mounting for perfect fit
30 Levels of Simultaneous Compression and Rebound Dampening
2 inch minimum and 3+ Inches of total potential drop
Great for Track, Street, and any other conditions

Show More Show Less

BC Racing BR Series Extreme Low Coilover Kit - 3-Bolt Top Mounts - F3...

For vehicles with 3-Bolt Front Upper Strut Mounts

T#:568073

Part#: I-61E-BR

Ships on Sep 9, 2026

$ 1,345.00 USD

Add to Wish List

Qty

$ 1,345.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. Specs and Features: 6k Front & 12k Rear Spring Rate V-Barrel front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Front Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities Great for Track, Street, and any other conditions

Show More Show Less

BC Racing BR Series Extreme Low Coilover Kit - 3-Bolt Top Mounts - F3...

For vehicles with 3-Bolt Front Strut Mounts

T#:568072

Part#: I-62E-BR

Ships on Sep 9, 2026

$ 1,345.00 USD

Add to Wish List

Qty

$ 1,345.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. Specs and Features: 6k Front & 12k Rear Spring Rate V-Barrel front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Front Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities Great for Track, Street, and any other conditions

Show More Show Less

BC Racing BR Series Extreme Low Coilovers - F32 F36 428i 430i 435i 44...

For vehicles with 5-Bolt Front Upper Strut Mounts

T#:568056

Part#: I-84E-BR

Ships on Sep 9, 2026

$ 1,345.00 USD

Add to Wish List

Qty

$ 1,345.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. Specs and Features: 6k Front & 12k Rear Spring Rate V-Barrel front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Front Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities Great for Track, Street, and any other conditions

Show More Show Less

BC Racing BR Series Extreme Low Coilovers - 5-Bolt Top Mounts - F32 4...

For vehicles with 5-Bolt Front Upper Strut Mounts

T#:568055

Part#: I-85E-BR

Ships on Sep 9, 2026

$ 1,345.00 USD

Add to Wish List

Qty

$ 1,345.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. Specs and Features: 6k Front & 12k Rear Spring Rate V-Barrel front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Front Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities Great for Track, Street, and any other conditions

Show More Show Less

BC Racing BR Series Coilover Suspension Kit - 5-Bolt Top Mounts - F32...

For vehicles with 5-Bolt Front Upper Strut Mounts

T#:555806

Part#: I-85-BR

Ships in 7 Business Days

$ 1,195.00 USD

Add to Wish List

Qty

$ 1,195.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

Specs and Features:

6k Front & 12k Rear Spring Rate
S-Barrel front & Linear rear springs
Valved specifically to spring style and rate
Camber Plate Front Mounts
Rear Rubber Mounts
Black Powder Coated Components
All OE style brackets and mounting for perfect fit
30 Levels of Simultaneous Compression and Rebound Dampening
2 inch minimum and 3+ Inches of total potential drop
Great for Track, Street, and any other conditions

Show More Show Less

BC Racing BR Series Coilover Suspension Kit - 5-Bolt Top Mounts - F32...

For vehicles with 5-Bolt Front Upper Strut Mounts

T#:36811806

Part#: I-84-DS

Ships in 5 Business Days

$ 1,395.00 USD

Add to Wish List

Qty

$ 1,395.00 USD

Add to Wish List

BC Racing's new proprietary digressive piston design offers increased damping force at low piston velocities while maintaining a linear damper feel at higher piston velocities. One of the greatest advantages of increased low-speed damping force relates to what the driver feels, e.g., roll, pitch, dive, and quick weight transitions on technical road courses. For The Ultimate In Driver Feel - Choose BC Racing DS Series Coilovers.

Show More Show Less

BC Racing DS Series Coilover Suspension Kit - 3-Bolt Top Mounts - F32...

For vehicles with 3-Bolt Front Strut Mounts

T#:36811822

Part#: I-62-DS

Ships in 5 Business Days

$ 1,395.00 USD

Add to Wish List

Qty

$ 1,395.00 USD

Add to Wish List

BC Racing's new proprietary digressive piston design offers increased damping force at low piston velocities while maintaining a linear damper feel at higher piston velocities. One of the greatest advantages of increased low-speed damping force relates to what the driver feels, e.g., roll, pitch, dive, and quick weight transitions on technical road courses. For The Ultimate In Driver Feel - Choose BC Racing DS Series Coilovers.

Show More Show Less

BC Racing ER Series Coilover Suspension Kit - 3-Bolt Top Mounts - F32...

For vehicles with 3-Bolt Front Upper Strut Mounts

T#:4347102

Part#: I-61-ER

Back Ordered

$ 1,935.00 USD

Add to Wish List

Qty

$ 1,935.00 USD

Add to Wish List

The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS

Show More Show Less

BC Racing ER Series Coilover Suspension Kit - Without Rear Pillowball...

For vehicles with 5-Bolt Front Upper Strut Mounts

T#:4347103

Part#: I-84-ER

Back Ordered

$ 1,935.00 USD

Add to Wish List

Qty

$ 1,935.00 USD

Add to Wish List

The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS

Show More Show Less

BC Racing RM Series Coilover Suspension Kit - 3-Bolt Top Mounts - F32...

For vehicles with 3-Bolt Front Strut Mounts

T#:47439365

Part#: I-62-RM

Back Ordered

$ 1,515.00 USD

Add to Wish List

Qty

$ 1,515.00 USD

Add to Wish List

The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The BC Racing RM Series Coilover System uses a much larger inverted piston shaft that can handle higher lateral loads for longer periods of time without fatigue. These higher lateral loads are only prevalent on McPherson style strut suspension, not on Double A-Arm vehicles.

Show More Show Less

BC Racing DS Series Coilover Suspension Kit - 3-Bolt Top Mounts - F32...

For vehicles with 3-Bolt Front Upper Strut Mounts

T#:47439430

Part#: I-61-DS

Back Ordered

$ 1,415.00 USD

Add to Wish List

Qty

$ 1,415.00 USD

Add to Wish List

BC Racing's new proprietary digressive piston design offers increased damping force at low piston velocities while maintaining a linear damper feel at higher piston velocities. One of the greatest advantages of increased low-speed damping force relates to what the driver feels, e.g., roll, pitch, dive, and quick weight transitions on technical road courses. For The Ultimate In Driver Feel - Choose BC Racing DS Series Coilovers.

Show More Show Less

BC Racing RM Series Coilover Suspension Kit - 3-Bolt Top Mounts - F32...

For vehicles with 3-Bolt Front Upper Strut Mounts

T#:47439431

Part#: I-61-RM

Back Ordered

$ 1,515.00 USD

Add to Wish List

Qty

$ 1,515.00 USD

Add to Wish List

The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The BC Racing RM Series Coilover System uses a much larger inverted piston shaft that can handle higher lateral loads for longer periods of time without fatigue. These higher lateral loads are only prevalent on McPherson style strut suspension, not on Double A-Arm vehicles.

Show More Show Less

BC Racing DS Series Coilover Suspension Kit - 5-Bolt Top Mounts - F32...

For vehicles with 5-Bolt Front Upper Strut Mounts

T#:47439428

Part#: I-85-DS

Back Ordered

$ 1,415.00 USD

Add to Wish List

Qty

$ 1,415.00 USD

Add to Wish List

BC Racing's new proprietary digressive piston design offers increased damping force at low piston velocities while maintaining a linear damper feel at higher piston velocities. One of the greatest advantages of increased low-speed damping force relates to what the driver feels, e.g., roll, pitch, dive, and quick weight transitions on technical road courses. For The Ultimate In Driver Feel - Choose BC Racing DS Series Coilovers.

Show More Show Less

BC Racing RM Series Coilover Suspension Kit - 5-Bolt Top Mounts - F32...

For vehicles with 5-Bolt Front Upper Strut Mounts

T#:47439429

Part#: I-85-RM

Back Ordered

$ 1,515.00 USD

Add to Wish List

Qty

$ 1,515.00 USD

Add to Wish List

The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The BC Racing RM Series Coilover System uses a much larger inverted piston shaft that can handle higher lateral loads for longer periods of time without fatigue. These higher lateral loads are only prevalent on McPherson style strut suspension, not on Double A-Arm vehicles.

Show More Show Less

OE Rear Upper Shock Mount Kit w/ Hardware - F3X F2X

T#:639047

Part#: 33506862725KT2

In Stock

Sale - Save 3% $ 168.99

This product was last offered at the strikethrough price on
05-03-2026

$ 163.15 USD

Add to Wish List

Qty

Sale - Save 3%

$ 168.99

This product was last offered at the strikethrough price on
05-03-2026

$ 163.15 USD

Add to Wish List

Strut mounts can begin to wear and fail over time, causing a knock in the suspension to occur. Replace yours with a OE Lemforder replacement to ensure a tight, noise-free ride. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform! Genuine BMW Guide Support - This item fits the following BMW Chassis: F22,F30,F31,F32,F33,F36

Show More Show Less

Front Control Arm Refresh Kit - F22, F23, F30, F31, F32, F33, F36 ...

T#:42099866

Part#: 31126854727TKT

In Stock

Sale - Save 3% $ 481.99

This product was last offered at the strikethrough price on
05-03-2026

$ 467.50 USD

Add to Wish List

Qty

Sale - Save 3%

$ 481.99

This product was last offered at the strikethrough price on
05-03-2026

$ 467.50 USD

Add to Wish List

Give your BMW the sharp handling it was engineered for with the Front Control Arm Refresh Kit, the perfect solution for a complete front suspension overhaul.

Front Suspension Refresh Kit - F2X, F3X

T#:711928

Part#: 31126852991KT2

Back Ordered

$ 553.99

This product was last offered at the strikethrough price on
04-06-2026

$ 490.99 USD

Add to Wish List

Qty

$ 490.99 USD

Add to Wish List

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

Show More Show Less

BC Racing Rear Damping Adjustment Extenders - BR Type

T#:555864

Part#: DMP-EXT

In Stock

$ 39.99 USD

Add to Wish List

Qty

$ 39.99 USD

Add to Wish List

The rear damping adjuster on coilovers is usually hidden under a bunch of hard to reach interior panels requiring you to remove carpet, panels and sometimes even the rear seat back in order to adjust the dampening on your BC rear coilovers. The BC Racing rear extender adjuster allow you to make these adjustments without removing the rear interior. Simple make two small holes in the interior above the adjuster and the extension can be passed through the interior panels. Now the adjustments can be performed from above.

Show More Show Less

Shocks and spring Installation Kit - 3 Bolt Top Mount - F22/3 F30/2/3...

T#:553619

Part#: 31306863135KT2

In Stock

$ 611.99

This product was last offered at the strikethrough price on
03-11-2026

$ 543.99 USD

Add to Wish List

Qty

$ 543.99 USD

Add to Wish List

This kit is contains all new strut and shock mounts and hardware needed when installing a new shocks and struts or aftermarket suspension on your vehicle.

Fits the following BMW's

F22/23 228i 228i xDrive M235i M235i xDrive without EDC and production date up 03/2015

F30 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive without EDC and production date up 03/2015

F32/33/36 428i 428i xDrive 435i 435i xDrive

Show More Show Less

Coilover Installation Hardware - (3/5/6-Bolt M8)

T#:14684339

Part#: 07119905032TKT

In Stock

$ 119.99 USD

Add to Wish List

Qty

$ 119.99 USD

Add to Wish List

All the hardware you need to remove and replace your front and rear suspension with new coilovers.

This Kit includes the following items:

FRONT

Front strut pinch bolts - QTY 2
Front strut pinch bolt nuts - QTY 2
Control arm ball-joint nuts - QTY 4
REAR

Lower shock mounting bolts - QTY 2
Lower shock locking nuts - QTY 2
Upper shock mounting bolts - QTY 6
Shock mounts - QTY 2
Shock pads - QTY 2

Show More Show Less

Strut Mount & Bearing Replacement Kit - F3X

For vehicles without EDC, with production date from 12/2014, and 5-bolt shock mounts

T#:855009

Part#: 31306881929KT2

In Stock

$ 336.99

This product was last offered at the strikethrough price on
03-11-2026

$ 269.99 USD

Add to Wish List

Qty

$ 269.99 USD

Add to Wish List

Replace your worn or clunking strut mounts with this kit that has all the necessities to get the job done. Kit includes strut mounts and hardware.

Strut Mount Replacement Kit - F3X Adaptive M Suspension

For vehicles with Adaptive M Suspension

T#:855013

Part#: 31306881930KT2

In Stock

$ 386.99

This product was last offered at the strikethrough price on
06-08-2026

$ 262.99 USD

Add to Wish List

Qty

$ 262.99 USD

Add to Wish List

Replace your worn or clunking strut mounts with this kit that has all the necessities to get the job done. Kit includes strut mounts and hardware.

Cup Kit/Coilover Installation Kit - With Spring Pads (5-Bolt M8) ...

T#:6683664

Part#: 313068819291KT

In Stock

$ 673.99

This product was last offered at the strikethrough price on
03-11-2026

$ 604.99 USD

Add to Wish List

Qty

$ 604.99 USD

Add to Wish List

If you are looking to install a cup kit or a set of coilovers on your BMW, this kit will be a great aid in doing so. It includes everything you will need to do the job, so you can admire your work sooner. See kit contents tab for a list of included components.

Show More Show Less

Strut Mount & Bearing Replacement Kit - F3X

For vehicles without EDC, with production date up to 11/2014, and 3-bolt shock mounts

T#:855008

Part#: 31306855817KT2

In Stock

Sale - Save 8% $ 247.99

This product was last offered at the strikethrough price on
05-03-2026

$ 227.83 USD

Add to Wish List

Qty

Sale - Save 8%

$ 247.99

This product was last offered at the strikethrough price on
05-03-2026

$ 227.83 USD

Add to Wish List

Replace your worn or clunking strut mounts with this kit that has all the necessities to get the job done. Kit includes strut mounts and hardware.

Meyle Rear Bump Stop - BMW F22/23 F3X

We Price Match - Give Us A Call or Chat!

T#:36066263

Part#: 3147400017

Ships in 3 Business Days

$ 36.99

This product was last offered at the strikethrough price on
05-07-2026

$ 35.99 USD

Add to Wish List

Qty

$ 35.99 USD

Add to Wish List

The rear bump stop protects the suspension by preventing bottoming out, improving ride comfort and maintaining stability.

Meyle Rear Upper Shock Mount - BMW F22/23 F3X F48 F39

We Price Match - Give Us A Call or Chat!

T#:8677200

Part#: 33506791706

Back Ordered

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

Strut mounts can begin to wear and fail over time, causing a knock in the suspension to occur. Replace yours with a Genuine BMW replacement to ensure a tight, noise-free ride. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

Front Upper Strut Mount - 5 Bolt

We Price Match - Give Us A Call or Chat!

T#:36201619

Part#: 31306881929

Back Ordered

$ 84.99 USD

Add to Wish List

Qty

$ 84.99 USD

Add to Wish List

One often overlooked piece is the upper strut bearing and mount. This is the top mount for your struts and provides a solid platform for your front suspension. If worn, the bearings within this mount make noise, there is slop from worn rubber, and it can shorten the life of your shocks. To get the most out of your new suspension setup, it's recommended that you replace all parts that are known to fail. Not only will this make your new setup more effective, it will provide a better ride, proper tire position, and make all of your parts last longer.

Show More Show Less

Meyle Front Lower Control Arm - Left - BMW F22/23 F3X RWD

We Price Match - Give Us A Call or Chat!

T#:36337185

Part#: 31126852991

In Stock

$ 92.99 USD

Add to Wish List

Qty

$ 92.99 USD

Add to Wish List

Failed control arms often cause vibrations and shaking felt through the steering wheel, which may intensify with speed or braking. Additional symptoms include suspension noise, misaligned steering, and accelerated tire wear.

Show More Show Less

Front Lower Control Arm Upgrade Kit - F2x, F3x

The straight control arm

T#:15777305

Part#: 31122284529-KT

In Stock

$ 404.99

This product was last offered at the strikethrough price on
05-07-2026

$ 393.99 USD

Add to Wish List

Qty

$ 393.99 USD

Add to Wish List

Utilizes the factory control arms sourced from the M3, providing an additional -0.5 degrees of negative camber to enhance cornering stability and steering precision. This kit replaces both front rear-position control arms and includes the integrated headlight leveling sensor bracket for proper suspension geometry and functionality.

Show More Show Less

Sport Suspension Kit - H&R Sport Springs/Bilstein B8 Performance Shoc...

T#:41222056

Part#: 28878-2TKT

In Stock

$ 1,365.00

This product was last offered at the strikethrough price on
07-01-2026

$ 1,306.99 USD

Add to Wish List

Qty

$ 1,306.99 USD

Add to Wish List

Sporty ride, premium parts with 1.3-1.5"F/0.7-1.0" lowering. Lifetime warranty!

TC Kline Racing Camber Plates - BMW F30/32/33/36 (w/ 3-Bolt Mounts) ...

For use with TC Kline Racing Coilovers Only - Replaces 3-Bolt Front Strut Mounts

T#:401223

Part#: TCKF30CP

In Stock

$ 518.00 USD

Add to Wish List

Qty

$ 518.00 USD

Add to Wish List

Add camber to your BMW with TC Kline Racing's camber plates!

Front Lower Right Control Arm - F30,F31,F32,F33,F34,F36 xDrive models...

We Price Match - Give Us A Call or Chat!

T#:4934923

Part#: 3160500200

In Stock

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

Control arms are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals. For a street-driven car we advise yearly inspection and a full replacement every 3-4 years. For track-driven cars these should be inspected before every event and replaced every two years. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars. We only offer parts we know you can trust to perform

Show More Show Less

Packaged by Turner - Front Control Arm Replacement Kit - F3x X-Drive ...

T#:27105174

Part#: 31126854727KT3

In Stock

Sale - Save 3% $ 481.99

This product was last offered at the strikethrough price on
05-03-2026

$ 467.50 USD

Add to Wish List

Qty

Sale - Save 3%

$ 481.99

This product was last offered at the strikethrough price on
05-03-2026

$ 467.50 USD

Add to Wish List

Is your BMW's suspension feeling loose and imprecise? It might be time for a refresh, and the team at Turner Motorsport has just the solution. Our front control arm refresh kit bundles all the essential components you need to restore your vehicle's handling and ride quality.

Why choose our kit? Because we understand the wear and tear that your BMW endures over time. Rough roads and harsh conditions take a toll on your suspension. With our comprehensive kit, you can address the common wear points in one go, ensuring optimal performance and longevity.

What's included in our kit? Everything you need: control arms, bushings, hardware, and more. By replacing these components together, you eliminate the risk of new parts being compromised by old, worn ones. Don't let sloppy handling and vague steering ruin your driving experience. Trust Turner Motorsport to provide a complete solution that restores the precision and feel of your BMW's suspension.

Signs that your front control arms may need replacing:

Clunking noise over rough roads Vague steering, especially at highway speeds Irregular tire wear Popping noises when going over bumps Vehicle pulling to one side during hard braking Don't wait for these symptoms to worsen. Upgrade your BMW's suspension with this front control arm refresh kit today.

Show More Show Less

Meyle Rear Track Strut - BMW F22/23 F3X

We Price Match - Give Us A Call or Chat!

T#:35998377

Part#: 33326792533

In Stock at Vendor

$ 74.99

This product was last offered at the strikethrough price on
03-20-2026

$ 52.99 USD

Add to Wish List

Qty

$ 52.99 USD

Add to Wish List

The rear track strut connects the spindle to the rear portion of the rear subframe.

Rear Suspension Refresh Kit - F3X

T#:711927

Part#: 33326792543KT2

Ships in 1 Business Day

Sale - Save 5% $ 899.99

This product was last offered at the strikethrough price on
07-06-2026

$ 852.61 USD

Add to Wish List

Qty

Sale - Save 5%

$ 899.99

This product was last offered at the strikethrough price on
07-06-2026

$ 852.61 USD

Add to Wish List

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

Show More Show Less

Shock and Strut Installation Kit - F22/23 F3X

T#:554762

Part#: F3XSIKT

In Stock

$ 611.99

This product was last offered at the strikethrough price on
03-11-2026

$ 543.99 USD

Add to Wish List

Qty

$ 543.99 USD

Add to Wish List

Replacing your struts and shocks? Don't forget the bushings! The rubber mounts for the shocks will go bad over time, especially if you drive hard or the roads are particularly rough. The shock mounts locate the front struts and rear shocks to the car - providing a quiet and vibration-free buffer between the road and the cabin. Shock mounts and bushings can wear out just like any other rubber part on the car. This leads to more noise and harshness reaching the chassis and may complicate your new suspension install. When installing new shocks, that is the perfect time to also replace the mounts. There is no additional time to install them, no special tools required, and doesn't take any extra time! If you re-use the original mounts you have the risk of them failing before your next shock replacement, doubling your labor costs.

Fits the following BMWs:
2014-03/2015 F22 BMW 228i 228iX M235i M235iX - vehicles without EDC
2012-03/2015 F30 BMW 320i 320iX 328i 328iX 335i 335iX - Sedan - vehicles without EDC
2014-03/2015 F34 BMW 328i 328iX 335iX - Gran Turismo - vehicles without EDC
2014-03/2015 F32 BMW 428i 428iX 435i 435iX - Coupe - vehicles without EDC
2014-03/2015 F33 BMW 428i 428iX 435i 435iX - Convertible - vehicles without EDC
2014-03/2015 F36 BMW 428iX 435iX - Gran Coupe - vehicles without EDC

Show More Show Less

Cup Kit/Coilover Installation Kit - With Spring Pads (3-Bolt M10) ...

For vehicles without EDC and with 3-Bolt Front Strut Mounts

T#:14353716

Part#: 31306863135TKT

In Stock

Sale - Save 2% $ 573.72

This product was last offered at the strikethrough price on
05-03-2026

$ 562.02 USD

Add to Wish List

Qty

Sale - Save 2%

$ 573.72

This product was last offered at the strikethrough price on
05-03-2026

$ 562.02 USD

Add to Wish List

If you are looking to install a cup kit or a set of coilovers on your BMW, this kit will be a great aid in doing so. It includes everything you will need to do the job, so you can admire your work sooner. See kit contents tab for a list of included components.

Show More Show Less

Meyle Shock Absorber Bump Stop

T#:40275156

Part#: 3147400021

Back Ordered

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

Engineered to guard your rear shock absorbers against dirt, debris, and moisture, helping to extend their service life and preserve peak suspension performance.

Front Lower Left Control Arm - F30,F31,F32,F33,F34,F36 xDrive models ...

We Price Match - Give Us A Call or Chat!

T#:4934922

Part#: 3160500201

Ships on Nov 27, 2026

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

Control arms are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals. For a street-driven car we advise yearly inspection and a full replacement every 3-4 years. For track-driven cars these should be inspected before every event and replaced every two years. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars. We only offer parts we know you can trust to perform

Show More Show Less

Meyle Front Lower Control Arm - Right - BMW F22/23 F3X RWD

We Price Match - Give Us A Call or Chat!

T#:36100107

Part#: 31126852992

Ships on Nov 27, 2026

$ 92.99 USD

Add to Wish List

Qty

$ 92.99 USD

Add to Wish List

Failed control arms often cause vibrations and shaking felt through the steering wheel, which may intensify with speed or braking. Additional symptoms include suspension noise, misaligned steering, and accelerated tire wear.

Show More Show Less

Additional Shock Absorber - Front

We Price Match - Give Us A Call or Chat!

T#:35964553

Part#: 31336854700

In Stock at Vendor

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

The bump stop limits strut travel to prevent suspension bottoming. Fits either left or right; one per strut. Replace when installing new strut inserts. Genuine BMW Additional Shock Absorber, Front - This item fits the following BMW Chassis: F31,F33,F36

Show More Show Less

Turner Performance Adjustable Front Suspension Upgrade Kit - F3X, F2X...

T#:1241381

Part#: F3XPERFSUSF2KT

Ships in 1 Business Day

$ 2,173.99 USD

Add to Wish List

Qty

$ 2,173.99 USD

Add to Wish List

Having issues with bump steer or sway bar preload in your lowered car? Looking for wider range of suspension adjustability? Look no further! This comprehensive kit contains all of the parts used and recommended by Turner Motorsport to correct, upgrade, and fine tune your suspension to your liking! From roll-center correction to widened range of adjustment over factory eccentric bolts, the parts in this kit have got you covered. Make the most of your BMW by replacing the slop of rubber bushings with spherical bearings and eliminating the limited adjustability of the factory suspension geometry. Kit Contents: Front: Lower Control Arms - Roll center, camber, track width, and headlight leveling adjustability Tension Arms - Caster adjustment Tie Rod Ends - Bump steer, roll center, and tie rod binding correction Sway Bar End Links - Adjustable height to eliminate preload

Show More Show Less

Coilover Installation/Cup Kit - Front - 5-Bolt Strut Mount

For vehicles without EDC, with production date from 12/2014, and 5-bolt shock mounts

T#:27871818

Part#: 31306881929KT4

In Stock

$ 415.99

This product was last offered at the strikethrough price on
03-11-2026

$ 321.99 USD

Add to Wish List

Qty

$ 321.99 USD

Add to Wish List

Installing a new set of shocks and struts in your BMW? Turner has your back with this complete "cup kit", which contains all the necessary components for ensuring a lasting installation.

See "kit contents" for a detailed list of all components included with this purchase.

Show More Show Less