BMW Suspension Parts for BMW 4 Series F32 (2014+)

Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components. 

Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

Tasked with keeping the vehicles rear end firmly mounted while absorbing noise, vibration, and harshness (NVH) factory rubber subframe bushings were engineered to provide a balance of control while keeping the ride quality soft and supple. As a factory bushings age, they become brittle and begin to harden. When this happens the bushing will actually shrink and allow excess play, or movement in the subframe. This is typically felt by a sudden jerk or "thunking" noise under acceleration and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushings with full polyurethane this play is eliminated since the subframe is being held in place by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering and acceleration inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver. 

Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. ​

This part fits the following BMWs:
2008 - 2013 E82 1 Series Coupe 128i 135i 135is 1M Coupe
2006 - 2008 E90 323i 325i 325xi 328i 328xi 330i 330xi 335i 335xi
2009 - 2012 E90 323i 323i 328i 328xi 335d 335i 335i xDrive 335xi
2006 - 2009 E91 325xi 328i 328xi
2009 - 2011 E91 328i 328xi 
2007 - 2013 E92 328i 328xi 335i 335xi
2007 - 2013 E93 328i 335i

The BMW F22, F30, and F32 Front Sway Bar Bushings (25 mm) are designed to optimize the performance of your vehicle’s suspension system by providing a precise fit for the 25 mm front sway bar. These bushings ensure the sway bar operates effectively, reducing body roll and improving handling.

Key Features:

1. Perfect Fit for 25 mm Sway Bars: Designed specifically for the BMW F22 (2 Series), F30 (3 Series), and F32 (4 Series) models with 25 mm front sway bars, these bushings ensure optimal sway bar performance.

2. Improved Handling: By limiting unwanted sway bar movement, these bushings provide better stability and sharper cornering, giving you more confidence on the road, especially during aggressive turns.

3. Durable Material: Available in rubber or polyurethane, with polyurethane bushings offering superior durability and resistance to wear and tear, resulting in more precise handling and a longer lifespan than traditional rubber bushings.

4. Applications:

   • BMW F22 (2 Series): Improves the already nimble handling of the sporty 2 Series.
   • BMW F30 (3 Series): Enhances the balance of comfort and performance in the 3 Series.
   • BMW F32 (4 Series): Increases agility and precision for the coupe’s sportier feel.

Benefits:

• Reduced Body Roll: Provides a flatter, more controlled ride during cornering.
• Sharper Steering Response: Improves the sway bar’s response to steering inputs, offering more connected handling.
• Increased Durability: Polyurethane bushings last longer than rubber, offering better performance over time.

For BMW enthusiasts or daily drivers looking to improve their car’s suspension dynamics, the 25 mm Front Sway Bar Bushings are an excellent upgrade, offering improved handling, stability, and durability for the F22, F30, and F32 models.

Looking to improve the handling characteristics of your BMW? The 034Motorsport Dynamic+ sway bar kit aims to do exactly that. These sway bars feature 3-way (front) and 2-way (rear) adjustability for infinite tailoring to suit your preferred stiffness. Constructed of high-grade spring steel, these bars are built with rigidity and durability in mind. Together, these front and rear sway bars provide reduced body roll, increased turn-in, reduced understeer, and enhanced steering feel.

2-way adjustability: Can be set to either 315% or 390% stiffer compared to 340i M-Sport sway bar Diameter: 22mm Material: Constructed from solid spring steel Finish: Black powder coat for corrosion resistance Reduces understeer and rear body roll Enhances turn-in rotation

Looking to improve the handling characteristics of your BMW? The 034Motorsport Dynamic+ sway bar kit aims to do exactly that. These sway bars feature 3-way (front) and 2-way (rear) adjustability for infinite tailoring to suit your preferred stiffness. Constructed of high-grade spring steel, these bars are built with rigidity and durability in mind. Together, these front and rear sway bars provide reduced body roll, increased turn-in, reduced understeer, and enhanced steering feel.

3-way adjustability: 62%, 72%, or 85% stiffness over factory 340i M-Sport sway bar Diameter: 30mm Construction: Hollow with thicker walls compared to the 340i M-Sport sway bar Finish: Black powder-coat for corrosion resistance Reduces front body roll Increases front grip and steering directness

• Improved handling performance & chassis dynamics
• Reduced body roll & understeer
• Superb comfort and ride quality
• Dynamic stance with optimal wheel gap
• Lightweight, high-strength construction
• Compatible with BMW adaptive suspension
• Made in USA at ISO 9001 certified facility

The Powerflex 13mm Rear Sway Bar Bushings for the BMW F22 2-Series, F30 3-Series, and F32 4-Series are designed to enhance the performance of the rear sway bar by replacing the stock rubber bushings with high-quality polyurethane. This upgrade provides a firmer connection, allowing the sway bar to work more effectively and delivering improved handling characteristics.

Benefits:

1. Sharper Handling: By reducing sway bar flex, these bushings help control body roll and provide a more stable feel during turns.
2. Increased Durability: Unlike traditional rubber, polyurethane bushings resist cracking, shrinking, and damage from elements like oil and grime, leading to longer service life.
3. Enhanced Precision: These bushings create a firmer link between the sway bar and the chassis, allowing for more precise steering feedback.
4. Direct Fit for 13mm Sway Bars: Designed specifically for BMW models with a 13mm rear sway bar diameter, ensuring compatibility and straightforward installation.

These bushings are perfect for drivers looking to add confidence in cornering and improve the long-term durability of their BMW’s suspension components, all without compromising everyday ride comfort.