Transmission Cooler for BMW 4 Series F32 (2014+)

Clear BMW chassis

Please ensure your correct model is selected

A transmission cooler is designed to keep fluids at a nominal temperature during periods of heavy use, or high heat. If yours is leaking, replace it now to prevent fluid loss and catastrophic failure.
Sort By:

Black Market Parts Transmission Cooler Fitting - N54/N55 - Priced Eac...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Precision Raceworks - Corporate Logo
T#:5229474
Part#: 601-0002
Ships in 9 Business Days
$ 34.99 USD
Free Shipping on orders $49 and up
The Black Market Parts Transmission Cooler Fitting compatible with many BMW's is a modular design that allows for easy connection to the factory lines for adding an aftermarket transmission cooler. Features: 10AN Male Flare Connection 6061 Anodized Aluminum Fitting Zero plastic for long lasting reliability Compatible with all known transmission fluids Stainless 1/8" NPT plugs for customers not needing additional port 1/8" NPT port for adding temp sensor for monitoring or fan control
Show More Show Less
Mishimoto Universal Automatic Transmission/Power Steering Cooler ...
For Automatic Transmissions only
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Mishimoto - Corporate Logo
T#:378417
Part#: MMTCU
In Stock
$ 110.99 USD
Free Shipping
$ 110.99 USD
Free Shipping
The Mishimoto Universal Transmission & Power Steering Cooler is used to cool automatic transmissions. Some Mishimoto radiators are only available for manual transmission applications; by using the universal transmission cooler, automatic transmission users have the ability to use our aluminum radiators with their automatic applications that would otherwise require an integrated transmission cooler. Fender bender damage your cooler? Mishimoto has you covered under its no questions asked warranty policy. Mishimoto will provide a warranty for all claims including vehicles involved in accidents. Warranty claims must include pictures of the accident and an official police report, and must be within three months of the accident. Dimensions of this core are 3/4" x 5" x 12". WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less
Black Market Parts (BMP) Transmission Cooler Fitting (Pair)
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Precision Raceworks - Corporate Logo
T#:38161729
Part#: 2X601-0002
In Stock
$ 71.99

This product was last offered at the strikethrough price on
01-22-2026

$ 69.99 USD
Free Shipping on orders $49 and up
$ 69.99 USD
Free Shipping on orders $49 and up
The Black Market Parts Transmission Cooler Fitting is a high-quality, modular solution designed for seamless integration with factory lines on various BMW models, making it effortless to install an aftermarket transmission cooler. Sold as a pair in this kit; two are typically required.
Show More Show Less

Genuine BMW Radiator Hose - From Left Side of Radiator - F30 F32 F31 ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Genuine BMW - Corporate Logo
T#:174457
Part#: 17127600554
Ships in 1-2 days
9% off MSRP $ 79.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 72.99 USD
Free Shipping
9% off MSRP
$ 79.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 72.99 USD
Free Shipping


Genuine BMW Coolant Hose -
This item fits the following BMW Chassis:
F22,F30,F32,F33,F34,F36

Fits BMW Engines including:
N20,N26


BMS Transmission Oil Cooler - BMW F-Chassis Gen 1 Oil Cooler ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:14915970
Part#: FG1B58TOC
Back Ordered
7% off MSRP $ 699.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 649.00 USD
Free Shipping on orders $49 and up
7% off MSRP
$ 699.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 649.00 USD
Free Shipping on orders $49 and up
Everyone knows that high heat is the enemy of your automatic transmission. And that higher power levels generate more transmission fluid heat which will cause a trans slip. Now you can extend the life of your automatic transmission by installing the new Burger Motorsports High Capacity B58 Gen1 Trans Cooler kit. This unique plug-and-play kit replaces your factory coolant to trans fluid heat exchanger with a high-capacity front-mounted air to trans fluid radiator. Includes all mounting hardware, lines, and coolant caps required for installation. Installs within the front bumper behind the driver-side kidney grills providing ample airflow over the large cooling core via existing openings. The result is dramatically reduced transmission temperature and extended transmission life. This kit is strongly suggested for any BMW B58 Gen1 F chassis automatic car running larger than factory turbos. 165ºF (74ºC) transmission oil cooler Improved Racing thermostat included The thermostat maintains the oil exiting the transmission at the rated minimum temperature in most conditions. Without a thermostat, the transmission fluid coolers are likely to over-cool the fluid, delaying transmission warm-up and performing the critical function of bypassing the cooler until the oil has reached its minimum operating temperature. FEATURES AND BENEFITS Dissipates excess transmission fluid heat Reduces transmission fluid temperature Increases transmission life when racing Increases transmission oil capacity included: (1) High capacity transmission oil cooler (2) Brackets (1) Billet adapter (2) Coolant plugs (1) Improved Racing 165F Thermostat + fittings (4)-10 AN crimped PTFE/SS/Nylon covered lines (6) M6x1.0x12mm bolts, washers and nuts (1) M6x1.0x20mm bolt Compatible with both RHD and LHD, RWD and AWD, ZF8HP50 and ZF8HP70 Transmissions.
Show More Show Less
CSF Universal Large Single-Pass Oil Cooler - Universal Application ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Universal fitment design - modifications may be necessary to run this cooler
CSF - Corporate Logo
T#:53608839
Part#: 8371
Ships in 4 Business Days
New Item
$ 499.00 USD
Free Shipping
$ 499.00 USD
Free Shipping
CSF redesigned this cooler and went with a more traditional inlet/outlet orientation. The new single pass design features high efficiency and high durability, but with vertically oriented inlet and outlet connections.
Show More Show Less

URO - Oil Cooler, Automatic Transmission for F22, F23, F30, F31, F32,...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
URO - Corporate Logo
T#:40106239
Part#: 17218514515
Ships in 2 Business Days
$ 137.99 USD
Free Shipping on orders $49 and up
Engineered to meet OEM standards, this durable oil cooler safeguards the transmission system, extending its lifespan and ensuring peak functionality.
TRANSMISSION OIL COOLER 17218514515
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Genuine BMW - Corporate Logo
T#:539353
Part#: 17218514515
Ships in 1-2 days
9% off MSRP $ 509.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 463.99 USD
Free Shipping
9% off MSRP
$ 509.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 463.99 USD
Free Shipping

Genuine BMW B58 3.0L Transmission Oil Cooler - 17218570062
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Genuine BMW - Corporate Logo
T#:528976
Part#: 17218570062
Ships in 4 Business Days
9% off MSRP $ 509.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 463.99 USD
Free Shipping
9% off MSRP
$ 509.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 463.99 USD
Free Shipping

Enhance your BMW's performance with the Genuine BMW B58 3.0L Transmission Oil Cooler - 17218570062. This genuine BMW transmission oil cooler ensures optimal cooling efficiency and protects your transmission from overheating. Here are the key benefits:

  • Genuine BMW part for superior quality and reliability
  • Specifically designed for the B58 3.0L engine
  • Helps maintain optimal transmission temperature
  • Protects transmission components from wear and damage
Show More Show Less

Rein - Radiator Hose
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Rein - Corporate Logo
T#:34080760
Part#: 17127600554
Ships in 4 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up

Radiator Hose is a critical component for maintaining the cooling system in your BMW, ensuring efficient coolant flow and optimal engine temperature regulation. This high-quality replacement hose helps prevent overheating and reduces the risk of coolant leaks, protecting your engine from damage. Designed to meet or exceed OEM standards, the Radiator Hose guarantees a precise fit and reliable, long-lasting performance. Available through Turner Motorsport, this hose offers an easy, direct-fit installation, making it an excellent choice for BMW owners looking to restore or upgrade their vehicle’s cooling system.

  • Designed for BMW models to ensure a perfect fit and compatibility
  • Maintains efficient coolant flow to prevent engine overheating
  • Constructed from high-quality, heat-resistant materials for durability
  • Reduces the risk of coolant leaks and protects against engine damage
  • Direct-fit replacement for easy, hassle-free installation
  • Meets or exceeds OEM specifications for superior performance and reliability

Upgrade your BMW’s cooling system with the Radiator Hose, ensuring long-lasting engine protection and optimal performance.

Show More Show Less