BMW Exhaust Parts, Mufflers & Catalytic Converters for BMW 4 Series F32 (2014+)

If you're seeking enhanced performance for your B46/B48 equipped F Chassis, explore our expertly crafted straight-pipe exhaust kit. By integrating our Turner Mid-Pipe Upgrade with the ECS Muffler Delete, you'll unlock the true potential and exhilarating, race-inspired sound of your exceptional 4-cylinder turbo engine!

Shedding an average of 27 lbs, this kit replaces your cumbersome and restrictive factory exhaust with lightweight, high-flow T304 stainless steel 3.0" exhaust piping. It's a seamless, direct bolt-on replacement for your entire factory exhaust, allowing you to swiftly elevate the performance of your daily driver or weekend warrior!

The B46/B48 engines represent a formidable new generation of 4 cylinders, boasting enhanced capabilities and a significantly improved exhaust note compared to their predecessors. Unlock the full driving potential of your underappreciated 330 or 430 with this brilliant curated kit designed specifically for you.

Features and benefits:

Complete sound and performance transformation
Simple, direct bolt-on installation (with instructions!)
27lb weight savings! (Muffler delete - 21 lbs, midpipe upgrade - 6 lbs!)
Tip adjustment capability ​
Slide farther on for left and right adjustment
Rotate for verticle adjustment
Good looking and durable 304 stainless steel construction
Heavy-duty fabricated sheet metal exhaust hangers
Dual staggered tip exhaust tips (integrated)
Installation and Support:

Installation is as easy as unbolting your factory exhaust and installing your full lightweight replacement
Tools you might want for the job:
Exhaust hanger removal pliers - T379176

Arguably THE BEST modification for your B46/B48. This muffler delete sounds too good to be a 4 cylinder! The combination of B48 and muffler delete surpasses all sound expectations from a 4-cylinder! Impressive direct-fit solution. With this new muffler delete you can transform the sound and driving experience of your 330 or 430. A simple installation that can be completed with hand tools gives you the ability to take your car to the next level at home in your garage!

The ECS B48 muffler delete removes the heavy and restrictive factory exhaust muffler and replaces it with a high-flow, straight-through exhaust pipe. This adds a louder exhaust note in a simple, cost-effective way without replacing the entire exhaust system and is fully compatible with the OEM rear valance. The muffler delete creates a noticeable increase in exhaust sound and more exhilarating turbo noise, without adding significant drone at cruising speeds. As an added bonus, our muffler delete shaves off 21.0 lbs., weighing in at only 7.0lbs compared to the OEM muffler at 28.0lbs!

Features and benefits:

Enhanced exhaust tone
Simple installation (with instructions!)
21lb weight savings! (Factory muffler 28 lbs, muffler delete 7 lbs!)
Tip adjustment capability ​
Slide farther on for left and right adjustment
Rotate for verticle adjustment
Good looking and durable 304 stainless steel construction
Heavy-duty fabricated sheet metal exhaust hangers
Dual staggered tip exhaust tips (integrated)
Installation and Support:

Installation is as easy as cutting, placing into position, and clamping!
Tools you might want for the job:
Exhaust hanger removal pliers - T379176
Exhaust pipe cutter - T385451

Upgrade your exhaust system with the 2.5" Stainless Steel 3-Bolt Flange - Priced Each. This high-quality flange is designed to provide a durable and reliable connection for your exhaust components. Made from stainless steel, it offers corrosion resistance and longevity, ensuring a lasting performance. Whether you're repairing or customizing your exhaust system, this flange is an essential component for a secure fit.

• Durable stainless steel construction
• Corrosion-resistant for long-lasting performance
• Provides a reliable connection for exhaust components
• Suitable for repair or customization of exhaust systems

Embark on your custom exhaust project confidently with the ECS Tuning Universal Exhaust catalog, offering quality and price-friendly options. Crafted from T304 Stainless Steel for corrosion resistance, these items feature premium benefits akin to our In-House Engineered Exhaust Systems. With a 3.0" ID (Slip fit) X 65mm OD (Butt) connections, 1.5mm (.060") wall thickness tubing ensures durability. Length on the 65mm OD side is 2.25" while on the 3.0" ID side is 3.50". Ideal for fabricating your unique exhaust system, these universal parts guarantee top-tier quality and longevity.

Benefits:

• Crafted from T304 Stainless Steel for corrosion resistance
• Features premium benefits akin to In-House Engineered Exhaust Systems
• Durable construction with 1.5mm (.060") wall thickness tubing
• Ideal for fabricating custom exhaust projects
• Ensures top-tier quality and longevity

For secure exhaust connections, choose the 2.25" (57mm) Exhaust Clamp.

Engineered for durability and reliability, this clamp ensures a tight seal for your exhaust system components. Its high-quality construction and corrosion-resistant finish provide long-lasting performance, even in harsh conditions. With easy installation and a precise fit, this exhaust clamp is a must-have for any vehicle owner.

• Ensures a tight seal for exhaust system components
• High-quality construction for durability
• Corrosion-resistant finish for long-lasting performance
• Easy installation for convenience
• Precise fit for secure connections

Transform the sound profile and driving dynamics of your BMW without replacing the entire exhaust system! Engineered specifically for the N20-equipped F3X platform, this direct-fit muffler delete delivers an aggressive, sporty tone you wouldn't expect from a 4-cylinder engine.

By eliminating the restrictive factory muffler and replacing it with a high-flow, straight-through exhaust pipe, this kit unlocks an incredible surge in volume and a sporty tone. Beyond the dramatic sound upgrade, this setup drastically improves performance efficiency through massive weight savings. The high-flow straight pipe removes 21 lbs from the rear of the vehicle, dropping the total axle-back exhaust weight down to just 7 lbs. Designed for quick at-home installation, it installs using basic garage hand tools and integrates perfectly with your OEM rear valance for a clean, OEM+ aesthetic.

Looking for the most attractive and adjustable tip on the market? Look no further than our ECS Swivel Exhaust Tips!

Featuring a unique swivel collar design that allows the tip to be adjusted in any direction to achieve that perfect fitment. Simply adjust the tip to your desired position and tighten the hex bolt to 14 ft-lbs (19 Nm) and the tip will stay where positioned.

Every ECS Exhaust Tip comes with a precision laser etched ECS Tuning logo and features a slant cut, double wall, rolled edge for a stunning appearance! These are engineered to last, featuring chrome plated nuts, 304SS cap screw, clamp, insert ring and exhaust tip.

Available in 3.5" or 4.0" outlet and chrome or black chrome finish.

Dimensions:

Inlet Size: 2.50"
Overall Length: 7.0"
Outlet Size: 3.50"
Outlet Style: Double Wall, Rolled Edge, Slant Cut
**Modification may be required for proper fitment.**

Carbon Fiber UNIVERSAL Swivel Exhaust Tips - 4.0" - Pair are designed to provide a stunning, adjustable upgrade for any vehicle. These high-quality exhaust tips feature a unique swivel collar design, allowing them to be adjusted in any direction for the perfect fitment. Simply position the tip to your desired angle and secure it with a hex bolt tightened to 14 ft-lbs (19 Nm), ensuring it stays in place.

• Customizable Fitment: The swivel collar design allows for versatile adjustment, ensuring a perfect alignment with your vehicle's exhaust system.
• Premium Materials: Constructed with single wall stainless steel and a rolled carbon fiber edge for a high-end look and durability.
• Durable Construction: Includes chrome-plated nuts, 304SS cap screw, clamp, and insert ring for long-lasting performance.
• Sleek Appearance: Features a slant cut and matte clear coated ECS Tuning vinyl logo for a stylish finish.
• Universal Fitment: Designed to fit various vehicles; modification may be required for proper fitment.

Dimensions:

• Inlet Size: 2.5"
• Overall Length: 6.0" (5.0" Tip + 1.0" Clamping Surface)
• Outlet Size: 4.0"
• Outlet Style: Single Wall Stainless, Rolled Carbon Edge, Slant Cut
• Sold as a Pair: Includes 2 tips.