BMW Exhaust Parts, Mufflers & Catalytic Converters for BMW 4 Series F32 (2014+)

Still have the factory exhaust fitted to your B58? You don't know what your missing. Free up lost performance with a new full cat-back exhaust complete with factory valve control!

The B58 engine earned the badge "Worlds 10 Best Engines" four times as of 2023. In 2016 the single turbo straight six found its way to the leaderboards for the first time and followed up in 2017, 2019, and 2020 staying on the charts as one of the best engines in the WORLD.

Our new cat-back exhaust is designed to take out restrictions, maximize flow and give your B58 a signature exhaust note that will excite you on every drive. From the factory your vehicle comes equipped with a combination of three mufflers and resonators that do a great job of silencing the exhaust and restricting flow. There is a center muffler(one restriction), rear section resonator(two restrictions) and a bulky muffler(three restrictions!). With all of those stop gates how do you expect to get the maximum performance out of your vehicle, you simply cannot do so. Lucky for our in-house engineers you no longer have to deal with the quiet and limiting factory exhaust.

To create a cat-back exhaust for this incredible engine the changes happen right after the downpipe. We replaced the factory oval pipe with our full 3.0" T304 stainless steel piping. The true 3.0" exhaust makes its way through the center and rear of the car without the center muffler or resonator to keep flow to a maximum! With smooth mandrel bent transitions our exhaust passes perfectly under the rear subframe for a factory equivalent fit. Positioned in the rear of the car is our signature B58 muffler with beautiful inlet and outlet piping that creates the perfect exhaust tuning. Featuring relief cut slip joints and fabricated sheet metal brackets the exhaust can be fully adjusted and mounted seamlessly in the factory locations. Dual 4.0" exhaust tips are optioned to fill out the open space in the rear diffuser and complete the rear profile of the vehicle.

Part Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged and TIG-welded throughout
Full 3.0" Stainless Steel Mandrel Bent Tubing
T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​
Strategically placed slip joints provide the most adjustability to obtain perfect fitment
Features and Benefits:

Street/Motorsport inspiration
Controlled by factory valves
Reduction in back pressure for increased throttle response, TQ and HP
Dual exit with fitted exhaust tips
Kit Contents:

3.0" front exhaust section (direct fitment to the factory downpipe)
Full 3.0" light weight free-flowing middle muffler sections for better sound, performance and weight savings.
Valved Rear muffler
Clamps and Hardware for an OEM+ install
Optional Turner Exhaust tips - 3.0" Inlet, 4.0" Outlet
Product Development:

Our F Chassis B58 Valved Catback was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.

B58 Engine Design:

BMW's first mass produced turbo charged engine, the N54 took the world by storm opening a whole can of worms in the car industry and aftermarket community. A new era of motors were created with the new B58 roughly 9 years after the N54 had been tested and pushed to its limits along with its single turbo companion, the N55. In 2015 the modular engine family was created and the B58 was released into the wild to set a new standard in performance and reliability. Turning back to their roots the B58 engine features a closed-deck engine design similar to the N54 that allows a massive increased in boost pressure capacity and heightened compression ratio. Thought the B58 is similar in weight and size to its predecessor, the new modular engine makes considerably more power right off the rip. With the new block design heat management has been upgraded to reduce the affects of heat cycling to slow the rate of cooling and prevent engine components from failing due to rapid cooling. Just like the N55 the B58 comes fitted with dual vanos, valvetronic and a single twin scroll turbo. Just 8 years experience of this motor we can all agree that the B58 looks like it could be the future of motors to come. This tunable engine has been tested up to 1000hp with the stock block and hosts a platform for the community to break into a whole new class of attainable "supercar killers".

Increase flow, turn up the volume, and shed some weight for the track. This is your chance to build your very own customized exhaust for your 335. We are excited to offer you the opportunity to spec out your exhaust just the way you want it. These exhaust components are strikingly good looking with beautiful welded pie cut construction and offer weight savings of over 55%. You can drop more than half the weight of your factory exhaust and give your car the aggressive sound it should have came optioned with from the factory.

We set out to amplify the F30/F32 with a proper exhaust system. To accomplish this goal, our engineers increased flow, give you the options to reduce weight by 27lbs, and deliver an exhaust system that captures the full unrestricted sound of the turbo inline-6 N55 engine. The increase in flow is gained from single free flowing 3.0" titanium exhaust pipes that feed into the best designed muffler on the market. Our Turner muffler is specifically designed with flow in mind to ensure that even with the exhaust valves closed, the muffler flows and sounds better than the stock muffler. Weight reduction is achieved by replacing the factory piping with lightweight Ti22 titanium and a full titanium muffler for the most weight advantage possible. The best part of the full titanium exhaust is the capability to control just how aggressive you want to your exhaust to sound, far beyond the point that the factory exhaust is able to perform. All of this plus the direct fitment and straight forward installation leads to our Turner Titanium exhaust being the clear answer in your mission to find the best exhaust for your N55 powered F30.

Part Design:

In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
Ultra-lightweight, Gr2 Titanium Alloy Material in a natural finish - 1mm wall thickness, back purged and TIG-welded throughout
3.0"OD tubing full system featuring pie-cut bend sections
Weight savings over the OEM exhaust system:
OEM Downpipe-back (without tips): 48 lbs
Turner Titanium Downpipe-back (without tips): 21 lbs
27 lb weight reduction!
Titanium 10mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​
Strategically placed slip joints provide the most adjustability to obtain perfect fitment
Lightweight Gr2 Titanium Valved Muffler Optimized for superior flow over OEM

Unleash the full potential of your BMW N55 (Electric Wastegate) with the CTS Turbo High-flow Cat, meticulously designed to optimize exhaust flow and deliver unmatched power gains. Bid farewell to factory constraints and welcome superior performance and enhanced sound!

Utilizing advanced CAD technology, this component seamlessly replaces your factory downpipe, ensuring a precise fit. Crafted from robust T304 stainless steel and expertly hand TIG welded with back purging, it ensures long-lasting and dependable performance.

Highlighted Features:

Precision-designed and rigorously tested for peak performance T304 stainless steel construction with TIG welded back-purged joints Direct replacement for the restrictive factory downpipe Substantial power increase without sacrificing performance Creates an exhilarating sporty exhaust sound while maintaining a refined tone during normal driving Eliminates drone typically found with factory exhaust setups Elevate your BMW N55's performance and sound with the CTS Turbo High-flow Cat, engineered for exceptional quality and outstanding performance on the road.

The CTS Turbo High-Flow Cat for the BMW BN26 is made to maximize exhaust flow for the highest power gains. Do not compromise performance and sound with factory parts – unleash your BMW’s potential!

Precisely designed and tested on a real car in the real world T304 stainless steel, TIG welded back-purged construction Replaces restrictive factory downpipe with high-flow 200-cell catalytic converter Great power upgrade with uncompromising performance Incredible sporty exhaust sound, subtle when cruising No drone with factory exhaust Designed using the latest in CAD technology; this part is made to fit perfectly in place of your factory downpipe. Manufactured from T304 stainless steel, hand TIG welded and back-purged to ensure years of reliable performance.

Turner Motorsport Rolled Angle Exhaust Tip - 3.0 Inlet - 3.0 OD - Stepped Left - Chrome brings a sleek and stylish upgrade to BMW exhaust systems. This high-quality exhaust tip features a striking chrome finish and a rolled angle, stepped design that adds both aesthetics and performance to your vehicle. Its precision design ensures a perfect fit and a bold look. With a 3.0-inch inlet and 3.0-inch outer diameter, this exhaust tip is designed to enhance the visual appeal of your BMW's exhaust system.

• Premium Chrome Finish: Adds a high-gloss, polished look to your vehicle’s exhaust.
• Rolled Angle Design: Provides a stylish and aggressive appearance.
• Stepped Left Design: Ensures a precise fit and a distinctive look.
• 3.0-Inch Inlet & Outer Diameter: Perfectly matches BMW exhaust systems for a seamless upgrade.
• Durable Construction: Built to withstand the elements and maintain its shine.

Universal 2.5" inlet to 3.5" outlet exhaust tip. Priced per exhaust tip.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Mirror Chrome Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

3.0" Inner Diameter
4.0" Outer Diameter
Brushed Finish
Double Wall Construction
Slant Cut Style
Includes Stainless Steel Clamp