Stud Conversion Kits for BMW 4 Series F32 (2014+)

Clear BMW chassis

If you are tracking your vehicle and need the ability to quickly swap wheels and tires, stud conversions are going to be a must-have modification for your BMW. Additionally, if you're someone who just finds lining up your wheel studs without a wheel hanger, these will make your life easier.

Sort By:

VTT M14 Titanium Wheel Stud Kits

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7292018

Part#: TISTUD201425

Back Ordered

Sale - Save 15% $ 335.99

This product was last offered at the strikethrough price on
07-02-2026

Starting at $ 285.59 USD

Add to Wish List

Sale - Save 15%

$ 335.99

This product was last offered at the strikethrough price on
07-02-2026

Starting at $ 285.59 USD

Add to Wish List

VTT is proud to offer Titanium wheel stud kits for the vehicle owner looking for the lowest possible unsprung weight while maintaining high strength, and good looks. This kit is 60% lighter than factory steel studs and nuts with a total kit of 20 nuts, and studs being 3.1LBS. VTT kit details are as follows: Grade 5 Titanium studs, rated at more than 135,000PSI Tensile Strength Grade 5 Titanium nuts with 60-degree cone seat to fit most all aftermarket wheel applications M5 Hex for easy installation Three Colors Available – Raw, Black, Burnt M14x1.25x75mm on the small end to M14x1.5 on the long end. This will convert M14x1.25 cars into M14x1.5 pattern Installation notes: Apply locktite to the studs (short end) and torque to 20 ft/lb. Lug nuts should be torqued to factory specifications. For safety retorque all hardware (studs and nuts) after 25-50 miles.

Show More Show Less

Turbo-Lock Red High-Strength Threadlocker (10ml Bottle)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:215382

Part#: 12-010BC

In Stock

$ 7.99 USD

Add to Wish List

Qty

$ 7.99 USD

Add to Wish List

Threadlocker is essential when doing any work to your car, especially prepping it for the track. Loose bolts should never happen! If you are a do-it-youselfer, or do much wrench turning, then you know about threadlocker (generically known as "locktite" or by the brand name Loctite). You also know a little goes a long way. This small bottle of Palm Labs Turbo-Lock red threadlock is perfect for that small job -- or a few small jobs! This tube has 10 mL (0.34 fluid ounces) of high-temp, high-strength threadlocker. This bottle comes with two ways to apply: with a squeeze or with the included brush. There are just too many different uses for this, and no mechanic or DIYer, should be without some in his or her toolbox.

Red or Blue threadlocker? Red is the highest strength so use it when the fastener will not be removed regularly or ever again. The Red will need a great amount of force to break free and maybe even heat. Blue is the medium strength and will break free with hand tools. Use it for fasteners that need extra locking protection but will be removed / disassmebled on a semi-regular basis.

Palm Labs Turbo-Lock Series 13-OR Features:

color: red/orange

Anaerobic Thread-locking Compound

permanent

high strength

high temperature resistant

oil resistant

primerless

acceptable up to 20mm (3/4") bolts
Equivalent or superior to Loctite 262.

MSDS Data Sheet
Technical Data Sheet

Show More Show Less

Turbo-Lock Blue Medium Threadlocker (10ml Bottle)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:215383

Part#: 11-010BC

In Stock

$ 8.99 USD

Add to Wish List

Qty

$ 8.99 USD

Add to Wish List

Threadlocker is essential when doing any work to your car, especially prepping it for the track. Loose bolts should never happen! If you are a do-it-youselfer, or do much wrench turning, then you know about threadlocker (generically known as "locktite" or by the brand name Loctite). You also know a little goes a long way. This small bottle of Palm Labs Turbo-Lock blue threadlock is perfect for that small job -- or a few small jobs! This tube has 10 mL (0.34 fluid ounces) of moderate temp, medium-strength threadlocker. This bottle comes with two ways to apply: with a squeeze or with the included brush. There are just too many different uses for this, and no mechanic or DIYer, should be without some in his or her toolbox.

Red or Blue threadlocker? Red is the highest strength so use it when the fastener will not be removed regularly or ever again. The Red will need a great amount of force to break free and maybe even heat. Blue is the medium strength and will break free with hand tools. Use it for fasteners that need extra locking protection but will be removed / disassmebled on a semi-regular basis.

Palm Labs Turbo-Lock Blue Features:

color: blue

Anaerobic Thread-locking Compound

permanent

medium strength

moderate temperature resistant

oil resistant

primerless

acceptable up to 20mm (3/4") bolts
Equivalent or superior to Loctite 242.

MSDS Data Sheet
Technical Data Sheet

Project Cars

SELECT YOUR BMW

Stud Conversion Kits for BMW 4 Series F32 (2014+)

VTT M14 Titanium Wheel Stud Kits

Turbo-Lock Red High-Strength Threadlocker (10ml Bottle)

Turbo-Lock Blue Medium Threadlocker (10ml Bottle)

Select Vehicle

Purpose

Category

Brand

Price

Shipping

Narrow Results