BMW Intake Parts for BMW 4 Series F32 (2014+)

Clear BMW chassis

Please ensure your correct model is selected

One thing drivers and cars have in common is the need for air. Induction systems provide a third of the critical necessities for engines to run, so giving your BMW the best way to breathe is paramount in engine performance. If you need to replace your filter, recharge your reusable pod filter, or upgrade your intake, turbos, or intercooler parts, everything can be found below. We have OEM replacements as well as aftermarket performance upgrades to keep your BMW pristine, powerful, and functioning at peak efficiency.

Sub-Categories

Sort By:

FTP Motorsport - Corporate Logo
T#:581354
Part#: SG71337
Special Order: No Guaranteed ETA
$ 270.00 USD
Free Shipping
$ 270.00 USD
Free Shipping
This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers
Show More Show Less
Forge - Corporate Logo
T#:384540
Part#: FMDVN20R
Ships on Nov 6, 2026
$ 344.99 USD
Free Shipping on orders $49 and up

This Blow Off, or Dump valve, is for the BMW N20 2.0 Turbo engines that have the electronically controlled bypass valve. It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred, where the original rubber diaphragm splits, which causes a loss of boost pressure. Unfortunately the failure doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure, so you may not be aware that you are losing power due to this.

Our alternative is a fully engineered solution offering significantly improved reliability. Our valve is piston based with no diaphragm to fail, and of all aluminium construction. It replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation.

Show More Show Less
Injen - Corporate Logo
T#:26704986
Part#: SES1128ICPWB
Back Ordered
$ 420.99 USD
Free Shipping on orders $49 and up
The Injen SES21128ICP Cold Side Intercooler pipe is the next logical step in your search for power gains in your N55 equipped BMW. This easy to install performance charge pipe system allows that turbocharged engine to breathe deeper to unleash that additional performance that you’ve been craving. These charge pipes pair perfectly with our cold air intake systems for even greater performance gains! The Injen Technology engineers spent abundant amounts of time designing, testing, and perfecting this performance intercooler charge pipe system to develop some serious bolt-on power. The soul of this charge pipe system is with our mandrel-bent, over-sized and stepped 3.00” to 2.50” T6-6061 aluminum tube that provides a smooth uninterrupted path for highly efficient airflow and a look that will impress every time you open your hood! The engineering team also developed precision CNC machined adapter flanges that mimic the OE-Style connections for a clean and simple install. Cold Side only Intercooler Charge Pipe System Manufactured from 3.00” stepped to 2.50” Lightweight T6-6061 Aluminum Piping Oversized piping reduces restriction providing increased airflow to the engine Our aluminum piping replaces the brittle, failure-prone factory unit. Precision CNC machined quick connect flanges for an OE-Style attachment Includes one 1/8” Female NPT bung Available in Polished, Wrinkle Black, and Wrinkle Red finishes Seamlessly adapts with the OE Intercooler Precision CNC machined, and TIG-Welded sensor flanges included Stainless Steel Band Clamp with Inner Protective Liner Automotive Grade Silicone Couplers Unique Injen Logo Plate for a Refined Style Increase Throttle Response and Decreases Turbo Lag Mandrel-bent Tubing for Increased Flow Uses all factory mounting locations Includes all necessary hardware for a hassle-free installation
Show More Show Less

FTP Motorsport - Corporate Logo
T#:582219
Part#: SG71337BP
Special Order: No Guaranteed ETA
$ 180.00 USD
Free Shipping
$ 180.00 USD
Free Shipping
This pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory piping is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers
Show More Show Less

FTP Motorsport - Corporate Logo
T#:578662
Part#: SG71337F
Special Order: No Guaranteed ETA
$ 370.00 USD
Free Shipping
$ 370.00 USD
Free Shipping
This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume
Show More Show Less
FTP Motorsport - Corporate Logo
T#:586830
Part#: SG71312FG-9
Special Order: No Guaranteed ETA
$ 24.95 USD
Free Shipping on orders $49 and up
Replacement Intake pipe C-clip and o-ring.

FTP Motorsport - Corporate Logo
T#:586843
Part#: SG71377
Special Order: No Guaranteed ETA
$ 55.00 USD
Free Shipping on orders $49 and up
These scoops will increase the air volume that enters the engine thus providing a denser air charge. These pair excellently with an aftermarket intake system or a high-flow filter.
Silicone Intake Inlet Upgrade - Blue - F Chassis B58
Works with the factory BMW intake and most aftermarket intakes
Paradigm Engineering - Corporate Logo
T#:5269555
Part#: FB58INTKINLETBLU
Back Ordered
$ 59.00 USD
Free Shipping on orders $49 and up
The Paradigm Engineering B58 BMW silicone intake pipe upgrade smooths the airflow from the intake to the factory turbo inlet by removing the upper factory sound resonator and the lower accordion section of the air inlet pipe.
Show More Show Less

Genuine BMW - Corporate Logo
T#:28871
Part#: 07129905261
In Stock
Sale - Save 26% $ 4.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 3.68 USD
Free Shipping on orders $49 and up
Sale - Save 26%
$ 4.99

This product was last offered at the strikethrough price on
05-02-2026

$ 3.68 USD
Free Shipping on orders $49 and up


Genuine BMW Torx-Countersunk Head Screw -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36

Show More Show Less

Genuine BMW - Corporate Logo
T#:7295
Part#: 13711716113
In Stock
3% off MSRP $ 10.80

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 10.47 USD
Free Shipping on orders $49 and up
3% off MSRP
$ 10.80

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 10.47 USD
Free Shipping on orders $49 and up


Genuine BMW Spring Clip - L=42Mm
This item fits the following BMW Chassis:
E34 M5,E39 M5,E60 M5,E63 M6,E46 M3,E53 48IS,E34,E38,E39,E46,E53 X5 X5,E63,E65,E82,E83 X3,E85 Z4,E86 Z4,E90,E92,E93,F15,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36

Show More Show Less
AFE - Corporate Logo
T#:557746
Part#: 54-12912-B
In Stock
$ 338.00 USD
Free Shipping
$ 338.00 USD
Free Shipping

7" Tall Air Filter:
This intake system utilizes an oil-free, 7" tall conical 360-degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance.

High-Quality Tube:
This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit.

Lightweight Vacuum Form Plastic Cover w/ Auxiliary Air Inlet:
Creates a stealthy under-hood look while reducing air intake noise without sacrificing power. A urethane plug is also included if you wish to block off the auxiliary air inlet.

Hassle-Free Installation:
All clamps, coupling, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts.

Note 1:
Does NOT fit Convertible models.

Note 2:
This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.

This part fits the following BMWs:
F3X B58 
 

Show More Show Less
Elring Intake Gasket Set - N52 N54 N55 N63
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:362567
Part#: 11617547242
In Stock
$ 18.99

This product was last offered at the strikethrough price on
06-19-2026

$ 18.19 USD
Free Shipping on orders $49 and up
$ 18.19 USD
Free Shipping on orders $49 and up

If you are having vacuum leaks or if you remove the intake manifold for any reason, this seal must be replaced to prevent any leaks from forming.  These are sold individually - a total of 4 are on the car.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits these BMW engines:
N52 N54 N55 N63

Show More Show Less


Intake Gasket - Priced Each
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:54995058
Part#: 11617547242
In Stock
New Item
Sale - Save 87% $ 19.99

This product was last offered at the strikethrough price on
09-16-2026

$ 2.69 USD
Free Shipping on orders $49 and up
Sale - Save 87%
$ 19.99

This product was last offered at the strikethrough price on
09-16-2026

$ 2.69 USD
Free Shipping on orders $49 and up
Genuine BMW - Corporate Logo
T#:36682
Part#: 11618506782
In Stock
21% off MSRP $ 22.76

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 17.99 USD
Free Shipping on orders $49 and up
21% off MSRP
$ 22.76

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 17.99 USD
Free Shipping on orders $49 and up


Genuine BMW Preformed Seal -
This item fits the following BMW Chassis:
F10,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36

Fits BMW Engines including:
N20,N26,N55

Show More Show Less
Hengst Air Filter - 13718616909
For vehicles with M Sports package
5X Entries Into Our F80 M3 Sweepstakes
5X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Hengst - Corporate Logo
T#:28404602
Part#: 13718616909
In Stock
$ 19.99

This product was last offered at the strikethrough price on
10-12-2026

$ 16.99 USD
Free Shipping on orders $49 and up
$ 16.99 USD
Free Shipping on orders $49 and up
This is an OEM Hengst filter made with the same materials and design as the original oil filter used by BMW dealers (but at a better price!)

Genuine BMW - Corporate Logo
T#:6533
Part#: 07129952104
In Stock
$ 3.99 USD
Free Shipping on orders $49 and up
GENUINE BMW HOSE CLAMP 07129952104

VRSF Intercooler Logo Stencil
We Price Match - Give Us A Call or Chat!
VRSF - Corporate Logo
T#:585083
Part#: 301010
In Stock
$ 14.99 USD
Free Shipping on orders $49 and up
Show off your VRSF intercooler
OEM Elring Intake Manifold Gasket - BMW N55 S55 3.0L
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:2691340
Part#: 11617588624
In Stock
$ 10.99 USD
Free Shipping on orders $49 and up
Leaking intake gaskets can cause power loss, rough running, and even trigger a check engine light. This gasket should be replaced each time the intake manifold is removed.

BMW N54 N55 S55 VRSF Charge Pipe Throttle Body O-Ring
We Price Match - Give Us A Call or Chat!
VRSF - Corporate Logo
T#:928441
Part#: 609010
In Stock
$ 14.99 USD
Free Shipping on orders $49 and up
Upgrade your N54, N55, or S55 BMW with this replacement o-ring designed for the charge pipe to throttle body connection. Over time, throttle body o-rings can wear out, leading to reduced performance and potential issues. With this replacement, you can ensure a proper seal and maintain the efficiency of your BMW's engine. Say goodbye to unwanted air leaks and hello to optimal performance.
Show More Show Less
Rein Silicone Vacuum Hoses - Blue - 3 Feet
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:378472
Part#: 11731259996-1
In Stock
$ 6.11 USD
Free Shipping on orders $49 and up
Replace your cracked or frayed vacuum lines. 3.5mm

Enthusiast Bundles - Corporate Logo
T#:24876349
Part#: 025817TMS13EBKT
Ships on Jan 15, 2027
Sale - Save 7% $ 3,771.98

This product was last offered at the strikethrough price on
05-05-2026

$ 3,498.89 USD
Sale - Save 7%
$ 3,771.98

This product was last offered at the strikethrough price on
05-05-2026

$ 3,498.89 USD

Titanium Exhaust Information

Upgrade your BMW with the Turner Motorsport Titanium Exhaust, offering increased flow, weight reduction, and enhanced sound. Shed over 55% of the OEM exhaust weight while enjoying a more aggressive tone for your N55-powered F30/F32.

Features:

  • Ultra-lightweight Gr2 Titanium Alloy Material
  • Single free-flowing 3.0" titanium exhaust pipes
  • Weight savings of 27 lbs over OEM exhaust
  • Direct fitment and straightforward installation
  • Includes Titanium Valved Muffler, Valve Adapter Harness, 3" Titanium Midpipe Sections, and 3.5" Turner Exhaust Tips

Intake Information

Enhance your BMW's engine bay aesthetics and performance with the Turner Motorsport N55 Carbon Intake. Witness significant power gains and reduced pressure drop post-filter for less stress on your turbo.

Features:

  • +7 WHP / +14 WTQ (peak gains) and +12 WHP / +15 WTQ (max gains)
  • 2x2 twill weave carbon fiber intake tube and lid
  • Wrinkle Black Powder Coated heat shield
  • High-flow reusable Turner Motorsport air filter
  • Lowers intake temperatures by 13 degrees
Show More Show Less

Rein Cloth Braided Fuel/Vacuum Hose - Black - 1 Meter
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:363139
Part#: N203531-1
In Stock
$ 12.99 USD
Free Shipping on orders $49 and up
Replace your cracked or frayed fuel or vacuum lines. 3.5mm ID
K&N - Corporate Logo
T#:4099
Part#: 99-5050
In Stock
$ 18.99 USD
Free Shipping on orders $49 and up
Cleaning and re-oiling your K&N filter will prolong its life and maintain K&N's performance advantage. You should clean your filter every year with water and K&N's cleaning solution and re-oil the filter every two years. K&N air fitlers come pre-oiled.
Show More Show Less
Genuine BMW - Corporate Logo
T#:568418
Part#: 13718596850
In Stock
5% off MSRP $ 11.57

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 10.99 USD
Free Shipping on orders $49 and up
5% off MSRP
$ 11.57

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 10.99 USD
Free Shipping on orders $49 and up
Seals the connection point between the charge air hoses at the inlet and outlet of the intercooler.


Kayser - Corporate Logo
T#:584199
Part#: 13717568031
Back Ordered
$ 7.50 USD
Free Shipping on orders $49 and up
Charge pipe to throttle body O Ring
VRSF N55 Turbo Outlet Charge Pipe O-Ring
We Price Match - Give Us A Call or Chat!
VRSF - Corporate Logo
T#:589208
Part#: 609020
In Stock
$ 12.99 USD
Free Shipping on orders $49 and up
Replace your stock O-ring when upgrading Charge Pipes

Genuine BMW - Corporate Logo
T#:43409
Part#: 13717603399
In Stock
$ 13.99 USD
Free Shipping on orders $49 and up


Genuine BMW Rubber Buffer
This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E70 X5,E71 X6,F02,F06,F10,F12,F13,F15,F16

Fits BMW Engines including:
N57N,N63,N63N,S63,S63N

Show More Show Less

Genuine BMW - Corporate Logo
T#:399461
Part#: 13717542860
In Stock
Sale - Save 35% $ 6.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 4.51 USD
Free Shipping on orders $49 and up
Sale - Save 35%
$ 6.99

This product was last offered at the strikethrough price on
05-02-2026

$ 4.51 USD
Free Shipping on orders $49 and up

This mounts the air box to the inside of the engine bay, preventing it from shaking and/or bouncing�around.

Genuine BMW Bump Stop
This item fits the following BMW Chassis:
E82 1M Coupe,E85 Z4M,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F02,F22,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83,i3

Fits BMW Engines including:
N52,N52N,N54,N54T,N55,S54,S55
�

Show More Show Less
Mishimoto - Corporate Logo
T#:25241773
Part#: MMCP-3035B
In Stock
$ 11.99 USD
Free Shipping on orders $49 and up
This transition coupler is constructed of high-quality heat resistant silicone, making it useful for fitting air intakes, intercooler piping, and more.

1 Meter Vacuum Hose (3.5x7.5)
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:9448313
Part#: 11727545323-1M
In Stock
$ 8.99 USD
Free Shipping on orders $49 and up
Used in many locations on the engine
Genuine BMW - Corporate Logo
T#:28904
Part#: 07129905541
In Stock
$ 1.99 USD
Free Shipping on orders $49 and up


Genuine BMW Hex Nut With Plate
This item fits the following BMW Chassis:
E36 M3,E39 M5,E60 M5,E63 M6,E46 M3,E82 1M Coupe,E85 Z4M,E30,E34,E36,E38,E39,E46,E53 X5 X5,E63,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83,i3

Show More Show Less

Airbox Mount - Priced Each
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:16873833
Part#: 049672LA01
In Stock
$ 3.99 USD
Free Shipping on orders $49 and up

Conti Tech Vacuum Hose (3.5x7.5) - 1 Meter
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:374693
Part#: 11727545323
In Stock
$ 8.25 USD
Free Shipping on orders $49 and up
Used in many locations on the engine
Vacuum Hose
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:55749613
Part#: 11747797129
In Stock
New Item
$ 31.99 USD
Free Shipping on orders $49 and up
This ÜRO Parts bulk vacuum hose is the ideal choice for replacing degraded, heat-cycled factory lines that weaken engine response and disrupt crucial turbocharger or emissions operations.
Forge - Corporate Logo
T#:370918
Part#: VC04R
In Stock
$ 15.99 USD
Free Shipping on orders $49 and up

Enhance Engine Performance with Silicone Vacuum Line

Upgrade your car's vacuum system with the Silicone Vacuum Line, a vital component that significantly impacts engine performance. Engineered to resist heat and contaminants, this silicone hose promises exceptional durability, ensuring prolonged and reliable operation.

Featuring an inner diameter of 4mm and a vibrant red color, this silicone hose arrives in a 9-foot section, offering the flexibility to customize lengths as needed. Damaged vacuum hoses can lead to various performance issues, from rough idling to engine starting problems. Promptly replace worn-out hoses to optimize your vehicle's overall performance.

Show More Show Less


URO - Corporate Logo
T#:50031889
Part#: 13547588625
Ships in 1 Business Day
$ 223.99 USD
Free Shipping on orders $49 and up
Ensures accurate airflow into the engine.
Genuine BMW - Corporate Logo
T#:36510
Part#: 11617535850
In Stock
14% off MSRP $ 18.82

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 16.19 USD
Free Shipping on orders $49 and up
14% off MSRP
$ 18.82

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 16.19 USD
Free Shipping on orders $49 and up
Genuine BMW SCREW

Precision Raceworks - Corporate Logo
T#:38229122
Part#: 501-0001
In Stock
$ 12.99 USD
Free Shipping on orders $49 and up
The Black Market Parts OE-Spec Intake Manifold O-Rings kit is made with Viton capable of withstanding all fuels (including e85) as well as oils. These o-rings are made to OE specifications and are a direct replacement for the seals found in your factory intake manifold. These o-rings are also used in other BMP products such as our N54/N55 Port Injection Kit, S55 Port Injection kit, N54 Performance Intake Manifold, and N55 Performance Intake Manifold.
Show More Show Less

Injen - Corporate Logo
T#:20848117
Part#: SP1123WB
In Stock at Vendor
$ 494.99 USD
Free Shipping on orders $49 and up
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world’s first tuned air intake system and holds four (4) patents on the tuning process of an intake system, something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology’s patented tuning processes, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patent 7,721,669), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You’re in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty! Dyno Proven gains of up to 13 hp and 12 lb-ft. of torque Short Ram Air Intake Design Features Injen’s patented MegaRam (MR) Technology Features Injen’s patented Air Fusion Technology Provides power gains while maintaining A/F ratios No additional tuning required 6061-T6 aluminum intake tubing Includes custom heat shield specifically designed for this application Fully serviceable Injen SuperNano-Web dry air filter Replacement air filter part number X-1105-BB Aggressive engine tone under full throttle Smooth intake piping eliminates restrictions and improves airflow Made in Pomona California, USA Injen Technology Limited Lifetime Warranty
Show More Show Less
034Motorsport - Corporate Logo
T#:25341450
Part#: 034-108-1050
Ships in 2 Business Days
$ 795.00 USD
Free Shipping
$ 795.00 USD
Free Shipping
The 034Motorsport X34 Carbon Fiber Cold Air Intake System enhances BMW F2X/F3X B58 performance, boosting horsepower and torque while delivering sporty induction and turbocharger sounds. Its sleek carbon fiber airbox design integrates a partially-enclosed airbox with a 3.5" inlet conical air filter mounted to a CNC-Machined Velocity stack, ensuring smooth airflow to the turbo inlet. Prioritizing airflow optimization around the air filter for maximum performance, the system features a CFD-optimized 4-Ply silicone intake tube, high-flow conical air filter with double-layer pleated cotton filtration medium, and air filter support to prevent unwanted movement. It offers increased airflow compared to stock intake, high-quality carbon fiber construction, enhanced throttle response and engine sounds, and simple installation with factory mounting points. Disclaimer: Intended for racing and off-highway use only; not legal for street vehicles.
Show More Show Less

Rein Silicone Vaccum Hose - Black - 65 Feet
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:378475
Part#: 5173125797120BLK
Ships in 3 Business Days
$ 175.99 USD
Free Shipping
$ 175.99 USD
Free Shipping
Replace your cracked or frayed vacuum lines. 3.5mm
AFE - Corporate Logo
T#:403778
Part#: 51-12912-C
Ships in 3 Business Days
$ 387.00 USD
Free Shipping
$ 387.00 USD
Free Shipping
This intake system utilizes an oil free, 7" tall conical 360 degree radial flow performance air filter with 3-layers of synthetic media providing maximum airflow and performance.

CSF Adaptor Plugs for B58/S58 Manifolds
2X Entries Into Our F80 M3 Sweepstakes
CSF - Corporate Logo
T#:56001930
Part#: CSF8403
Ships in 3 Business Days
New Item
$ 75.00 USD
Free Shipping
$ 75.00 USD
Free Shipping
Add methanol, water, or nitrous injection to your build with ease. This premium 6-plug kit features an internal 5/16-24 thread, turning your CSF B58 or S58 manifold runners into custom injection ports.
Show More Show Less

Mishimoto - Corporate Logo
T#:51075063
Part#: MMICP-N55-11
In Stock
$ 349.99 USD
Free Shipping on orders $49 and up
Upgrade your N55's charge air system with the Mishimoto Performance Charge Pipe Kit.
Rein Air Intake Tube - Priced Each
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:17738367
Part#: 13717605638
In Stock
$ 95.06 USD
Free Shipping on orders $49 and up
Reins OE Air Intake tube is designed to stop pressure build-up in the engine at a more affordable cost.
MMX Performance - Corporate Logo
T#:4524482
Part#: MMR01-0702
Special Order: No Guaranteed ETA
$ 102.99 USD
Free Shipping
$ 102.99 USD
Free Shipping
Replacement performance panel air filter for your N20 engine. Upgrade your engines breathing capabilities with a simple to install air filter! MMX's performance air filter is constructed of cotton gauze and easily drops into the OE airbox. The result is excellent filtration properties, instant performance increase, and extra induction noise. Features Increased engine performance Improved induction noise Fits OE air filter housing Easy installation and completely washable
Show More Show Less


AFE - Corporate Logo
T#:584563
Part#: 51-76312
Ships in 3 Business Days
$ 451.00 USD
$ 451.00 USD
Adds an impressive 14% flow increase with gains up to 13hp and 12ft-lbs of torque!
Burger Motorsports - Corporate Logo
T#:49822565
Part#: BMSB585BS
Ships on Nov 3, 2026
$ 139.00 USD
Free Shipping on orders $49 and up
Compatible with BMW B58 and S58 engines Accurate, reliable, and plug-and-play — the B58/S58 5-Bar TMAP Sensor ensures your engine sees the full boost picture, giving your tune the confidence it needs to perform safely and consistently.
Show More Show Less