BMW Tools & Specialty Equipment for BMW 3 Series F34 (2014+)

3-Ton Jack Stands - Pair

T#:1362398

Part#: OEM24852

Ships in 7 Business Days

$ 120.99 USD

Add to Wish List

Qty

$ 120.99 USD

Add to Wish List

Safe and secure for Garage use

Seal Puller

T#:1809137

Part#: W1219

In Stock at Vendor

$ 10.99 USD

Add to Wish List

Qty

$ 10.99 USD

Add to Wish List

Leverage works for you.

Riv Nut Installation Tool

T#:638963

Part#: T05

Ships in 6 Business Days

$ 12.00 USD

Add to Wish List

Qty

$ 12.00 USD

Add to Wish List

Having trouble installing riv nuts? Go ahead and grab yourself this riv nut installation tool to make your project a whole lot easier!

Disc Brake Piston "Cube"

T#:8138613

Part#: W80621

Ships in 2 Business Days

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

For relining rear disc brakes by rotating pistons back into brake calipers when replacing pads Features: 5 drive pin configurations fit most applications Use with 3/8" drive tools

AC Hydraulic Single-Stage Air Hydraulic Jack For High Clearance Appli...

T#:558013

Part#: TOL-25-1H

Ships in 4 Business Days

$ 2,911.99 USD

Add to Wish List

Qty

$ 2,911.99 USD

Add to Wish List

If you have a situation where no amount of positioning or floor jack extensions seem to work to lift your vehicle, you may just finally need that specialty jack. This AC Hydraulic Single-Stage Air Hydraulic Jack for high clearance applications is a top of the line, straight lift design floor jack that is both extremely durable and extremely reliable. Plus, unlike traditional jacks, there is no lifting arm that may come in contact with any part of the the vehicles body or other components that would result in damage. With a lift height of up to 24.06 inches, or up to 33.9 inches with an F250 extension, this air hydraulic jack is perfect for high lift, tight clearance needs.

Features:

Minimum height of 14.21 in
Maximum height of 24.06 in, the F250 (optional) extension offers a total extended height of 33.90 in
Hard chromium plated piston rod for long life
Built-in safety overload valve
Hand-operated dead-man’s control for optimum safety whilst lifting and lowering
Ergonomic handle with push buttons
With 2 extensions (1.97/3.94 in)

Specifications:

Capacity: 55000 lb
Min. height: 14.21 in
Max. height: 24.06 in
Frame length: 32.17 in
Handle length: 45.67 in
Width: 9.06 in
Width (with wheels): 12.28 in
Air supply: 9 - 12 bar
Air consumption: 350 l/min
Weight: 157lbs

Show More Show Less

350 Pc. O-Ring Assortment

T#:385276

Part#: ATD387

Ships in 7 Business Days

$ 143.99 USD

Add to Wish List

Qty

$ 143.99 USD

Add to Wish List

You never know when you will need another O-ring

3/8" Low Profile Oil Filter Socket Set (24mm-36mm)

T#:14882881

Part#: 13270

Ships in 7 Business Days

$ 172.99 USD

Add to Wish List

Qty

$ 172.99 USD

Add to Wish List

5.5 Ton Hydraulic Bottle Jack With Single Lift And Extension Screw ...

T#:23615506

Part#: A3,5-170

Ships in 4 Business Days

$ 133.99 USD

Add to Wish List

Qty

$ 133.99 USD

Add to Wish List

For some of the best bottle jacks in production, stick with AC Hydraulic. Now backed by our LIFETIME REPLACEMENT program, don't worry about your jack failing you by combining two amazing brands in one deal: ECS's lifetime replacement and AC Hydraulic's premium quality.

Features:

With extension screw for optimal use of the stroke
Jack can be used in horizontal position, as long as the pump piston is placed under the jack
Fitted with practical carrying handle for easy transport

Specifications:

Capacity: 11,000 lb
Min height: 8.27 in
Hydraulic lift: 5.91 in
Extension screw: 3.94 in
Max height: 18.11 in
Bevelled base: No

Show More Show Less

6 Piece Garage Service Combo

T#:1105891

Part#: 640816

Ships in 8 Business Days

$ 149.00 USD

Add to Wish List

Qty

$ 149.00 USD

Add to Wish List

A good start to outfitting your home garage - hydraulic jack, jack stands, chocks, and a creeper.

BMW Jack Pad Red - Price Each

T#:54388468

Part#: BMWJACKPADRED1

Ships on Oct 5, 2026

$ 19.00 USD

Add to Wish List

Qty

$ 19.00 USD

Add to Wish List

Lifting your BMW, MINI, or GR Supra should never involve crossing your fingers and hoping you don't crush a rocker panel. Plastic factory jack points are notorious for cracking under the flat, unforgiving surface of a standard floor jack. Stop damaging your car's undercarriage and lift like a pro with this Billet Jack Pad Adapter from Burger Motorsports.

Show More Show Less

VTT Billet Cylinder Head Lifting Tool (Black) - N54/N55/S55

2X Entries Into Our F80 M3 Sweepstakes

T#:4921506

Part#: VTT-HH-BLK-BOTH

Ships on Oct 2, 2026

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

The Vargas cylinder head tool is machined from a solid billet of 6061-T6 aluminum and anodized in color for long-lasting corrosion resistance. They are knurled for non-slip grip when oily or wet, and positioned so the head is balanced when lifting. For those who do a lot of extensive work with various BMW models. Vargas has developed a tool for anyone that works on BMWs often, and needs a way to easily remove, install, or transport a cylinder head. A helpful tool for those who frequently work on N54, N55, and S55 engines and want to ensure proper removal and installation without potential damage to components! What you get: 1 Head Handler 3 short and 3 long extensions 3 short and 3 long M7 bolts

Show More Show Less

VTT Billet Cylinder Head Lifting Tool (Red) - N54/N55/S55

2X Entries Into Our F80 M3 Sweepstakes

T#:4921504

Part#: VTT-HH-RED-BOTH

Ships on Oct 2, 2026

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

The Vargas cylinder head tool is machined from a solid billet of 6061-T6 aluminum and anodized in color for long-lasting corrosion resistance. They are knurled for non-slip grip when oily or wet, and positioned so the head is balanced when lifting. For those who do a lot of extensive work with various BMW models. Vargas has developed a tool for anyone that works on BMWs often, and needs a way to easily remove, install, or transport a cylinder head. A helpful tool for those who frequently work on N54, N55, and S55 engines and want to ensure proper removal and installation without potential damage to components! What you get: 1 Head Handler 3 short and 3 long extensions 3 short and 3 long M7 bolts

Show More Show Less

Permatex Contact Cement

T#:2958745

Part#: 25905

Ships in 2 Business Days

$ 6.99 USD

Add to Wish List

Qty

$ 6.99 USD

Add to Wish List

Makes a tough, permanent bond on contact. Instantly bonds metal, wood, ceramic, leather, rubber and many other surfaces.

VTT Billet Cylinder Head Lifting Tool (Blue) - B58

2X Entries Into Our F80 M3 Sweepstakes

T#:4921507

Part#: VTT-HH-BLUE-B58

Ships on Oct 2, 2026

$ 68.99 USD

Add to Wish List

Qty

$ 68.99 USD

Add to Wish List

The Vargas cylinder head tool is machined from a solid billet of 6061-T6 aluminum and anodized in color for long-lasting corrosion resistance. They are knurled for non-slip grip when oily or wet, and positioned so the head is balanced when lifting. For those who do a lot of extensive work with various BMW models. Vargas has developed a tool for anyone that works on BMWs often, and needs a way to easily remove, install, or transport a cylinder head. A helpful tool for those who frequently work on B58 engines and want to ensure proper removal and installation without potential damage to components! What you get: 1 Head Handler B58 only requires short extensions and comes with M6 bolts Note: Fitment not yet confirmed for S58 Engine

Show More Show Less

7mm Brake Caliper Socket

T#:3729717

Part#: LIS33900

Ships in 2 Business Days

$ 5.99 USD

Add to Wish List

Qty

$ 5.99 USD

Add to Wish List

Knock that brake caliper loose with this 7mm socket!

Permatex Brushable Form-A-Gasket, 4oz

T#:25763

Part#: 80019

Ships in 2 Business Days

$ 13.99 USD

Add to Wish List

Qty

$ 13.99 USD

Add to Wish List

Permatex Form-A-Gasket is a brushable sealant that you can use in many automotive applications where a gasket either doesn't exist or is damaged or no longer available. This 4oz container includes a brush for easy application. Permatex is slow-drying and will not harden over time (no cracks or leaks) and does not break down from exposure to gasoline, grease, or oils. It has a workable temperature range from -65*F to 400*F and is used throughout the aviation and automotive industries.

Shipment Restriction UPS Ground/Standard shipping only. This item cannot be shipped outside of the lower 48 US states or Canada and cannot be shipped via Air services.

Show More Show Less

Suvneer Wheel Hanger - M12 X 1.25 - Blue

Specifically for vehicles using M12 x 1.25 wheel bolts

T#:51356105

Part#: WHLHGR-12125-BL

Ships in 6 Business Days

$ 17.00 USD

Add to Wish List

Qty

$ 17.00 USD

Add to Wish List

The Suvneer Motorsports™ Wheel Hanger is the "third hand" you need in your trunk or toolbox.

Infrared Digital Thermometer

T#:3672502

Part#: OEM25245

Ships in 7 Business Days

$ 48.99 USD

Add to Wish List

Qty

$ 48.99 USD

Add to Wish List

Professional quality laser guided non-contact thermometer

Permatex Plastic Welder

T#:2943896

Part#: 84115

Ships in 2 Business Days

$ 8.99 USD

Add to Wish List

Qty

$ 8.99 USD

Add to Wish List

A structural adhesive designed for general purpose bonding of a wide variety of material such as hard and soft plastics to specified surfaces.

Piston Ring Installer

T#:1809133

Part#: W80575

Ships in 2 Business Days

$ 17.62 USD

Add to Wish List

Qty

$ 17.62 USD

Add to Wish List

Comfortable vinyl grip handles.

Heavy-Duty 1/2" Drive Cordless Li-ion Impact Wrench

T#:641228

Part#: OEM24481

Ships in 7 Business Days

$ 255.99 USD

Add to Wish List

Qty

$ 255.99 USD

Add to Wish List

Try the convenience of cordless power tools.

High-pressure fuel pump supply port caps

T#:5135636

Part#: AGA-CP-0-14

Ships in 8 Business Days

$ 8.99 USD

Add to Wish List

Qty

$ 8.99 USD

Add to Wish List

Don't let dirt be the reason for bad fuel injectors.

Maxi TPMS Kit With Sensors

T#:5663676

Part#: AULTS508K1

Ships in 7 Business Days

$ 739.99 USD

Add to Wish List

Qty

$ 739.99 USD

Add to Wish List

Pinpoint and replace bad TPMS Sensors

10 Pc. 1/2" Dr. Wheel Torque Extension Set

T#:383676

Part#: ATD4380

Ships in 7 Business Days

$ 514.99 USD

Add to Wish List

Qty

$ 514.99 USD

Add to Wish List

Torque down wheels without using a torque wrench, with these extensions (sockets not included)

AGA Tools 8HP Park Release Tool

T#:26404886

Part#: AGA-8HP-PRT

Ships in 8 Business Days

$ 489.00 USD

Add to Wish List

Qty

$ 489.00 USD

Add to Wish List

BMW Jack Pad Red - Pair

T#:54388469

Part#: BMWJACKPADRED2

Ships on Oct 5, 2026

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

Lifting your BMW, MINI, or GR Supra should never involve crossing your fingers and hoping you don't crush a rocker panel. Plastic factory jack points are notorious for cracking under the flat, unforgiving surface of a standard floor jack. Stop damaging your car's undercarriage and lift like a pro with this Billet Jack Pad Adapter from Burger Motorsports.

Show More Show Less

Corbin Style Hose Clamp Pliers

T#:1362360

Part#: OTC4502

Ships in 7 Business Days

$ 102.99 USD

Add to Wish List

Qty

$ 102.99 USD

Add to Wish List

Includes a cross-slotted jaw pliers and a wide, flat-band hose clamp pliers.

Suvneer Wheel Hanger - M12 X 1.25 - Red

Specifically for vehicles using M12 x 1.25 wheel bolts

T#:51356108

Part#: WHLHGR-12125-RD

Ships in 6 Business Days

$ 17.00 USD

Add to Wish List

Qty

$ 17.00 USD

Add to Wish List

Take the heavy lifting out of your next wheel rotation with the Suvneer Motorsports™ Wheel Hanger in Red.

3/4 Ton Engine Leveler

T#:1377515

Part#: OEM24831

Ships in 7 Business Days

$ 169.99 USD

Add to Wish List

Qty

$ 169.99 USD

Add to Wish List

Use with a engine crane for easier engine installation

Multi Use Transfer Pump

T#:1809134

Part#: W1145

In Stock

$ 18.80 USD

Add to Wish List

Qty

$ 18.80 USD

Add to Wish List

Quickly and easily transfer any fluid.

6-Ton Jack Stands - Pair

T#:386187

Part#: 1006D

Ships in 7 Business Days

$ 306.99 USD

Add to Wish List

Qty

$ 306.99 USD

Add to Wish List

These jack stands have steel base pads for superior stability

Composite Trim Removal Tool Set

T#:1996196

Part#: W80648

Ships in 2 Business Days

$ 15.99 USD

Add to Wish List

Qty

$ 15.99 USD

Add to Wish List

Set contains five unique tools for removing internal and external trim and molding fasteners.

AC Hydraulic Workshop Crane W/ Parallel Legs

T#:39835959

Part#: WJN10-EUR

In Stock

$ 1,340.00 USD

Add to Wish List

Qty

$ 1,340.00 USD

Add to Wish List

AC Hydraulic's Hydraulic Workshop Crane W/ Parallel Legs for pallets. Foldable within seconds for quick and easy storage When folded the crane takes up a minimum of space on the workshop floor Hard chromium plated ram and pump piston for long life Fitted with 2 castors and 2 fixed wheels for easy maneuverability even with maximum load Hand operated dead man’s release for optimum safety whilst lowering

Show More Show Less

MaxiBAS BT506

T#:2914145

Part#: BT506

Ships in 7 Business Days

$ 402.99 USD

Add to Wish List

Qty

$ 402.99 USD

Add to Wish List

The BT506 is a battery and electrical system analysis tool that use as Adaptive Conductance an advanced battery analysis method, to produce a more accurate examination of the battery’s cold cranking ability and reserve capacity, vital to determining a b

Show More Show Less

Extractor Set Stripped Screw 10 Pc.

T#:31556187

Part#: LIS61980

Ships in 2 Business Days

$ 51.99

This product was last offered at the strikethrough price on
05-07-2026

$ 50.99 USD

Add to Wish List

Qty

$ 50.99 USD

Add to Wish List

Suvneer Motorsports Wheel Hanger - M14x1.25mm - Anodized Clear ...

T#:26005168

Part#: WHLHGR-14125-CL

Ships in 6 Business Days

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Introducing the Suvneer Motorsports™ Wheel Hanger – an essential tool designed to streamline the wheel installation process, embodying the precision and quality synonymous with the Suvneer Motorsports™ brand. Crafted with a keen eye for detail and performance, this wheel hanger is a must-have for automotive enthusiasts and professionals seeking a reliable and efficient solution. Constructed from high-grade materials, the Suvneer Motorsports™ Wheel Hanger combines durability with precision engineering. Its robust design ensures longevity, making it a trusted companion for both amateur and seasoned mechanics alike. The hanger's strength lies in its ability to simplify the often intricate task of wheel installation. The ergonomic design of the Suvneer Motorsports™ Wheel Hanger is crafted for user comfort and efficiency. With a sleek, user-friendly shape, it provides a secure grip, allowing for ease of handling during the wheel installation process. The precisely machined threads deliver a seamless engagement with lug holes, eliminating the frustration of cross-threading and ensuring a smooth and trouble-free wheel installation. Versatility is at the forefront of the Wheel Hanger's design. Engineered to accommodate various lug patterns, it is universally compatible, catering to a wide range of vehicle makes and models. This adaptability makes it an indispensable tool for any automotive enthusiast, ensuring that the right tool is always at hand for a hassle-free wheel installation experience. Experience the Suvneer Motorsports™ commitment to excellence with the Wheel Hanger – a tool that seamlessly combines functionality, durability, and ease of use. Elevate your garage experience with a precision-engineered solution that simplifies the wheel installation process, allowing you to achieve professional results effortlessly. Trust in the Suvneer Motorsports™ Wheel Hanger to deliver a superior wheel installation experience where performance meets convenience in the world of motorsports. Key Features: Material: Strong 6061-T6 Aluminum Alloy Precision Fitment: Designed to help hold your wheel in place. Lightweight: Precipitated Hardened Aluminum

Show More Show Less

VTT Billet Cylinder Head Lifting Tool (Red) - B58

2X Entries Into Our F80 M3 Sweepstakes

T#:4921505

Part#: VTT-HH-RED-B58

Ships on Oct 2, 2026

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

The Vargas cylinder head tool is machined from a solid billet of 6061-T6 aluminum and anodized in color for long-lasting corrosion resistance. They are knurled for non-slip grip when oily or wet, and positioned so the head is balanced when lifting. For those who do a lot of extensive work with various BMW models. Vargas has developed a tool for anyone that works on BMWs often, and needs a way to easily remove, install, or transport a cylinder head. A helpful tool for those who frequently work on B58 engines and want to ensure proper removal and installation without potential damage to components! What you get: 1 Head Handler B58 only requires short extensions and comes with M6 bolts Note: Fitment not yet confirmed for S58 Engine

Show More Show Less

FlatStoppers - 16" Wide Supercar FlatStoppers

T#:641862

Part#: RR-FS-16-SC

Ships in 10 Business Days

$ 342.99 USD

Add to Wish List

Qty

$ 342.99 USD

Add to Wish List

16" with flatstoppers car storage ramps - 4 PACK

16 Piece Punch & Chisel Set

T#:5691151

Part#: AST1600

Ships in 7 Business Days

$ 86.99 USD

Add to Wish List

Qty

$ 86.99 USD

Add to Wish List

Cut, drive and punch.

QuickJack 8000TL - 8,000 Lb. Capacity - 110 Volt (60Hz)

T#:40748607

Part#: 8000TL

Ships in 4 Business Days

Starting at $ 2,225.00 USD

Add to Wish List

Starting at $ 2,225.00 USD

Add to Wish List

The 8000TL has a maximum lifting capacity of 8,000-lb. It is the highly-anticipated sequel to QuickJack's beloved 7000TL. With the ability to lift an extra 3-inches, the 8000TL portable car lift provides more room to tackle every repair and maintenance task on vehicles weighing up to 8,000-lbs. It also takes seconds to get up and running following initial one-time assembly. Just drop it on the ground and hook up the power. As soon as the jack frames and rubber blocks are in place under your vehicle, it'll be at a work-ready height in no time at all.

Show More Show Less

Suvneer Wheel Hanger - M12 X 1.25 - Silver

Specifically for vehicles using M12 x 1.25 wheel bolts

T#:51356106

Part#: WHLHGR-12125-CL

Ships in 6 Business Days

$ 17.00 USD

Add to Wish List

Qty

$ 17.00 USD

Add to Wish List

The Suvneer Motorsports™ Wheel Hanger in Silver is the perfect "third hand" for your garage.

Reclining Hi-Low Creeper Seat

Cannot ship outside of US

T#:33213303

Part#: 5160119

Ships in 5 Business Days

$ 296.00 USD

Add to Wish List

Qty

$ 296.00 USD

Add to Wish List

Engineered for optimal comfort and ease of movement, this reclining creeper seat is ideal for anyone working under vehicles. Its gas spring-supported backrest offers adjustable reclining from 0° to 70°, with seat angles shifting in 10° increments up to 30°, delivering superior ergonomics for mechanics and hobbyists alike.

Equipped with six 360° swivel casters, this creeper seat glides effortlessly around the workspace, allowing you to move smoothly without constantly adjusting your position, helping you stay focused on the job.

Constructed from heavy-duty materials, the seat is upholstered with non-slip, marine-grade vinyl, resistant to abrasion, chemicals, and oil. This durable design provides long-lasting comfort and is the perfect addition to your garage setup.

Features:

TPR wheels feature a shock absorbing cushioned ride, while providing good floor protection and quiet rolling operation
TPR wheels are resistant to chemicals, acids, alcohol, and water
Wide, large diameter wheel improves rolling over rough surfaces
Heavy-duty non-slip textured marine grade vinyl
Comfortable thick-padded seat and backrest
Locking casters
Seat is resistant to abrasion, chemical, and oil

Specifications:

Length (Backrest Up): 33 in. / 840 mm
Length (Backrest Down): 45.25 in. / 1,150 mm
Width (Frame): 17 in. / 430 mm
Width Overall: 20.75 in. / 530 mm
Seat Height (Down): 6.25 in. / 161 mm
Backrest Height (Up): 31.5 in. / 800 mm
Seat/Backrest Width: 14.75 in. / 376 mm
Ground Clearance: ≈3 in. / 76 mm
Seat Angle Min. / Max.: ≈0° to 30°
Maximum Load: 600 lbs. / 272 kg.
Backrest Angle Adjustment: Gas spring
Seat Angle Adjustment: Mechanical Lock — 3 positions
Casters: Six 360° Casters, ø2.5 in x .75 in., sleeve bearings, oil resistant, non-marring rubber wheels.
Seat Materials: Padded Marine Vinyl Backrest and Seat. Marine Vinyl is abrasion, chemical and oil resistant.
Frame Materials: Full powder coated, welded steel square tube
Weight: 41.25 lbs. / 19 kg.
Backrest Angle Min. / Max.: ≈0° to 70°

Show More Show Less

BMW Transfer Case Bushing Removal And Installation Kit

T#:25042567

Part#: CTA8816

Ships in 6 Business Days

$ 450.45 USD

Add to Wish List

Qty

$ 450.45 USD

Add to Wish List

This all-encompassing tool kit facilitates the removal and reinstallation of the transfer case mount, providing adapters and other essential components for the task at hand. Tailored for a diverse range of BMW models equipped with AWD or xDrive systems, the kit is thoughtfully packaged in a plastic blow-molded carrying case.

Applications: X3, X5, X6, 530xi, 525xi, 325xi, 330xi, 328xi, 528xi, 535xi, 335xi, X6, 528i xDrive, 535i xDrive, 328i xDrive, 335i xDrive, and X1.

Show More Show Less

Dual End Scriber

T#:641411

Part#: KDT2979

Ships in 7 Business Days

$ 10.99 USD

Add to Wish List

Qty

$ 10.99 USD

Add to Wish List

Sharp, tempered point scribes metal

3/8" Drive Breaker Bar 12" Handle

T#:3672467

Part#: KDT81221

Ships in 7 Business Days

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

Break loose those stubborn fasteners

VTT Billet Cylinder Head Lifting Tool (Black) - B58

2X Entries Into Our F80 M3 Sweepstakes

T#:4921508

Part#: VTT-HH-BLK-B58

Ships on Oct 2, 2026

$ 68.99 USD

Add to Wish List

Qty

$ 68.99 USD

Add to Wish List

The Vargas cylinder head tool is machined from a solid billet of 6061-T6 aluminum and anodized in color for long-lasting corrosion resistance. They are knurled for non-slip grip when oily or wet, and positioned so the head is balanced when lifting. For those who do a lot of extensive work with various BMW models. Vargas has developed a tool for anyone that works on BMWs often, and needs a way to easily remove, install, or transport a cylinder head. A helpful tool for those who frequently work on B58 engines and want to ensure proper removal and installation without potential damage to components! What you get: 1 Head Handler B58 only requires short extensions and comes with M6 bolts Note: Fitment not yet confirmed for S58 Engine

Show More Show Less

Permatex Nickel Anti-Seize Lubricant - 8oz

T#:2928962

Part#: 77124

Ships in 2 Business Days

$ 50.99 USD

Add to Wish List

Qty

$ 50.99 USD

Add to Wish List

Protects metal parts from seizing and galling at temperatures up to 2400°F (1316°C).

QuickJack 6000TL - 6,000 Lb. Capacity - 110 Volt (60Hz)

T#:40748605

Part#: 6000TL

Ships in 4 Business Days

Starting at $ 2,075.00 USD

Add to Wish List

Starting at $ 2,075.00 USD

Add to Wish List

The 6000TL has a maximum lifting capacity of 6,000-lb. It is the highly anticipated sequel to QuickJack's 5000TL. With the ability to lift an extra 3-inches, the 6000TL portable car lift provides more room to tackle every repair and maintenance task on vehicles weighing up to 6,000-lbs. It also takes seconds to get up and running following initial one-time assembly. Just drop it on the ground and hook up the power. As soon as the jack frames and rubber blocks are in place under your vehicle, it'll be at a work-ready height in no time at all.

Show More Show Less