BMW Brakes & Brake Parts for BMW 3 Series F34 (2014+)

Are you looking for a fast, easy and affordable braking kit that gives you better braking and brake cooling? Then this Z26 Street Warrior Brake Kit from Power Stop is exactly what you need!

The Z26 Street Warrior Brake Kit includes everything you will need in the box including:

Drilled and Slotted Rotors Extreme Carbon-Fiber Ceramic brake pads Stainless steel hardware New guide-pin bushings High temperature brake lubricant The brake pads included in this kit are the Power Stop Extreme carbon-fiber ceramic brake pads. These create much less dust than stock pads and the compound adds severe-duty stopping power without sacrificing everyday drivability. Also, these pads cut down on brake noise, ensuring noise-free stopping no matter where you are.

In addition, the rotors have been upgraded from stock to ensure that they not only hold up to the rigors of performance braking, but also last as long as possible. To do this they started with precision drilling to give the rotors additional cooling. Next was the addition of rounded slots in the friction surface. This allows gas and debris to be easily wiped away, keeping the contact patch on the rotor clear for smooth, safe braking. Finally, the coated the rotor with a Silver Zinc Dichromate plating to add both looks and rust and corrosion prevention to the rotors as well. This prevents the typical rust lip from forming and keeps the rotor from forming any potential weak points after extended use.

Elevate your lifting experience with the Schwaben Long Low Profile - High Lift Floor Jack. Certified for excellence and designed with a keen understanding of European car enthusiasts' needs, this jack is a testament to precision, durability, and performance. Don't compromise on quality—choose the Schwaben advantage for all your lifting endeavors.

Designed with precision, crafted for performance, and backed by our lifetime replacement program, the Schwaben Long Low Profile - High Lift Floor Jack is a must-have tool for every European car aficionado. This jack is engineered to cater to the unique needs of low ground clearance vehicles, ensuring that your prized possessions are lifted with care and precision.

Key Features:

• One Pump Reach: With its innovative one-pump feature, this floor jack effortlessly reaches contact on most cars, streamlining your lifting process.
• Low Profile Advantage: Boasting a mere 2-3/4" low height and a deep-reach lift arm, this jack is tailored for those sports cars and luxury vehicles that ride close to the ground.
• Hydraulic System Protection: The dual pump pistons are expertly shielded to thwart contaminants from compromising the hydraulic system's integrity.
• Built for Durability: Crafted with heavy gauge construction and fortified with rolled edges, this floor jack guarantees unwavering strength and longevity.
• Precise Control: The U-Joint release mechanism offers meticulous control over load descent at any handle position, ensuring the safety of both you and your vehicle.
• Maneuverability Redefined: Upgraded casters allow seamless maneuverability and effortless positioning of the jack, empowering you to find that perfect lifting spot.
• Safety First: The internal by-pass valve prevents over-pumping, shielding the hydraulic system from stress-induced issues.
• Vehicle Protection: A full cover rubber saddle pad and a protective foam cover on the handle are in place to prevent any unintended damage during the lifting process.
• Impressive Capacity: With a remarkable 4000 lb. capacity, this jack is ready to tackle a range of European vehicles.
• LIFETIME REPLACEMENT: Like almost all Schwaben products, this jack is backed by our lifetime replacement program in case anything goes wrong!

Specifications:

• Min Height: 2-3/4"
• Max Height: 24"
• Handle Length: 49-1/4"
• Jack Body Length: 35"
• Length from Pivot Point to Center of Jack Pad: 22"
• Front Casters: 2-1/2" diameter x 2" width
• Saddle Diameter: 4" with full saddle pad
• Weight Capacity: 4000 lbs.
• ANSI / ASME PALD 2009 Certified

Also included are the Schwaben Aluminum 3-Ton Jack Stands. These ultra-light Schwaben jack stands only weigh 4.7 lbs each. Fit and finish on these stands show how much pride in workmanship goes into our stands. These stands feature all-aluminum construction with heavy-duty flanged bases to safely stabilize loads. Features 6 locking positions for a secure load in multiple heights. The load pin is extra heavy duty at .584 in. diameter and features a posi lock ball to ensure the pin stays in place.  

• Min. Height is 10.6".
• Max Height is 15.4".
• Large 7" diameter base.
• Outer support tube is 2-1/8" in diameter.

For replacement parts, please call us and ask for:

• ES#4430428 - Replacement Screw Set
• ES#4430429 - Replacement Front Wheel
• ES#4430430 - Replacement Caster Wheel

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

A high-performance street pad with much-improved braking performance and without the levels of dust from a factory pad. The Street 5.0 pads are perfect for drivers who don’t want an ordinary replacement pad and want something that will hold up during aggressive street driving. The Street 5.0 pads are similar to the established Hawk HPS pads but with more initial bite. While the HPS pads fill the need of a direct replacement OEM-type pad, the Street 5.0 kicks braking performance into the next gear. With the Street 5.0 pads you can expect:

• Better stopping power even when the pads are cold
• Good initial bite (more than on Hawk HPS)
• Excellent resistance to fade during street use
• Moderate dust during normal street driving
• Quiet operation
• Easy on rotors

This pad set includes pads for both REAR brakes. 

These Front Brake Pads fit the following BMWs:
2014+ F22 F23 BMW 228i
2012+ F30 BMW 320i 328i 328i X-Drive Sedan
2012+ F31 BMW 328i X-Drive Touring Wagon
2012+ F32 BMW 428i 428i X-Drive Coupe
2013+ F33 BMW 428i 428i X-Drive Convertible
2012+ F34 BMW 328i 328i X-Drive Gran Turismo
2012+ F36 BMW 328i 328i X-Drive GranCoupe

These are the OEM brake pads to fit the specific BMWs listed below. BMW used several different suppliers for their brake pads and we buy direct from their distributors to get you the same pad as originally equipped but at a fraction of the cost of the local BMW dealer. OEM brands include Pagid, Textar, Jurid, Ate, and others. These are the same pads as what originally came on your car but without the expensive BMW logo.

This set includes pads for both the front and rear brakes.

This item fits the following BMWs:
F22/23 BMW 228i (with M Sport Brakes), M235i/xDrive, M240i/xDrive
F30/31/34 BMW 328i/xDrive (with M Sport Brakes), ActiveHybrid 3 (with M Sport Brakes), 335i/xDrive
F32/33/36 BMW 428i/xDrive (with M Sport Brakes), 435i/xDrive

The Hawk DTC (Dynamic Torque Control) compound offers the highest friction coefficient of any Hawk pad. The DTC pads offer extremely high torque with aggressive controllable initial bite, superior release and torque control characteristics. 

Featuring: 

• High Intial Bite
• Consistent torque over all pressures
• Operating Range:400-1600°F; 204-871°C
• High Temp & High Torque
• Provides Superior Pad and Disc Wear
• Excellent Torque Control
• Excellent Modulation and Release Characteristics
• Designed for High Deceleration Rates.

*Not for vehicles with Carbon Ceramic brake rotors.