Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
Increase drivetrain rigidity and put that power to the ground! This industry-leading encapsulated design reduces NVH and prevents heat transfer.
From the factory, all BMW models are equipped with soft rubber or fluid-filled engine mounts. While these mounts perform well at isolating drivetrain vibrations, they are prone to degradation and allow for significant drivetrain movement. This often results in a loose-feeling driveline, missed shifts, and a generally disconnected driving feel.
To address these issues, We have developed a performance alternative. Constructed from 6061 Billet Aluminum, these mounts are built to last. While most performance drivetrain mounts feature solid or polyurethane-bonded aluminum construction, the engineers at Turner designed a unique four-piece design that disburses NVH (noise, vibration, and harshness). This multi-piece design offers the added benefit of serviceability. Additionally, encapsulating the polyurethane and adding a TecaPeek isolator prevents heat transfer to the insert, increasing the lifespan and durability of the mount.
Features & Benefits:
High-strength 6061 billet aluminum construction
80A Polyurethane provides a considerable increase over stock rubber durometer, eliminating excess deflection and ensuring drivetrain stiffness.
Instead of the typical polyurethane-bonded aluminum construction, this mount is encapsulated to reduce NVH (noise, vibration, and harshness).
Finished in black hard-coat anodized for a clean, durable, and corrosion-resistant finish.
TecaPeek isolator reduces heat transfer from the engine to the mount insert, increasing the lifespan of the mount.
A simple bolt-on design makes for an easy install
Replace your worn-out factory engine mounts and experience increased drivetrain rigidity, reduced deflection, and more precise shifting. Our Turner Performance Polyurethane Engine Mount Set is designed for maximum durability and strength while maintaining the perfect balance between stiffness and comfort—the perfect choice for your high-horsepower BMW!
The factory BMW S55 dual-mass flywheel is engineered with comfort in mind, catering to the luxury-oriented expectations of the brand’s driving experience. Its design focuses on dampening drivetrain vibrations, smoothing out gear transitions, and minimizing harshness during operation. However, this refinement costs valuable performance. The dual-mass flywheel adds a substantial 26.5 lbs of rotational mass to the drivetrain, which significantly hinders throttle response and makes rev-matching feel sluggish and disconnected. Moreover, dual-mass flywheels are notorious for being a weak link in modified or high-performance builds and can prove costly to replace when they inevitably fail.
Our Single-Mass Lightweight Flywheel Conversion addresses all of these shortcomings with a purpose-built, lightweight, single-mass design that prioritizes performance. Weighing in at only 18.5 lbs., this design significantly reduces rotational mass, allowing your S55 to achieve its true motorsport potential!
Features & Benefits:
Precision machined from 4140 HT heat-treated chromoly steel for exceptional toughness, even wear properties, and increased durability. Material quality promotes even wear across the entire friction surface, prolonging component lifespan. Heat treated to HRC 28-32, tempered to relieve stress and improve dimensional stability. Hardness improves component wear characteristics. Black oxide coated for corrosion resistance on non-friction surfaces. Precision balanced to exceed OEM specification (G16 spec to 175g-mm). SFI 1.1 certified to ensure safe operation under extreme operating conditions. Specifically designed to work with S55 OE-architecture clutches. Optimized step height maximizes clutch clamp load and offers a prolonged service life. Performance:
10 lbs. lighter than the factory BMW flywheel! OEM Dual-Mass: 26.5 lbs. Turner Motorsport Single-Mass: 18.5 lbs. Faster revs Improved throttle response and acceleration Allows for a more engaging driving experience and delivers a feeling of direct connection
Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication! Select your vehicle to make sure you are viewing the best Liqui Moly options for your application.
Interval oil changes are often recommended for differentials to ensure long-term reliability and maximum wear prevention. Fresh oil will prevent excess wear and gear damage, maintaining smoother operation.
Check your owner's manual to determine when it is best to flush your differential and what type and weight fluid to use when re-filling your system.
This 75w140 weight oil's multi-viscosity are perfect for ensuring protection in all climates and its synthetic composition allows for smoother operation even under the most demanding conditions.
APPROVALS:
API GL5
LIQUI MOLY RECOMMENDS THIS PRODUCT FOR VEHICLES THAT NEEDS TO COMPLY THE FOLLOWING SPECIFICATIONS:
BMW Hinterachsgetriebeöl
Ford WSL-M2C 192A
Scania STO 1:0
VME
ZF TE-ML 05D
ZF TE-ML 12D
ZF TE-ML 16G
ZF TE-ML 21D
Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.
Maintain the longevity of your BMW's manual transmission and differential by incorporating this fully synthetic 75w90 weight gear oil into your maintenance routine. Flushing and replacing fluids at specified intervals, as per your owner's manual, is crucial to prevent costly issues in the future. Explore the benefits of this gear oil:
Meets Specifications:
Turner Motorsport recommends flushing and replacing your manual transmission and differential fluid regularly to ensure proper component wear and prevent costly issues in the future. Refer to your owner's manual for specific intervals for flushing and refill.
This fully synthetic 75w90 weight gear oil is designed to maintain smooth shifting in your transmission. Its unique multi-viscosity formula provides excellent protection in all weather conditions. Being fully synthetic, it guarantees smoother shifts across all vehicles.
Note: Verify that your application requires GL4 oil. This product meets API GL-4+ specifications.