These bushings have the hole off-center to give your car a little more track, caster, and camber. This style came as standard equipment on E30 M3s (8/89-later) and 1995 E36 M3 but will work with any E30, E36, Z3.

Rubber control arm bushings are designed to flex and absorb energy. That's fine on a streetcar but on an all-out racing machine you want your alignment to stay constant. We have picked Delrin for this application due to its high rigidity and low coefficient of friction allowing for minimal suspension bushing deflection (geometry change) but decreasing bushing windup or drag (friction). They are not recommended for street-use but highly-recommended for track cars.

To save time, pick up a pair of new bushing carrier brackets and hardware. This will save you the time and hassle of pressing out the old bushings. This will especially save you time if you're buying new control arms at the same time (no time wasted removing the old brackets from the arms). Stainless steel set screws included.

BMW’s are known to have failure prone front thrust arm bushings.  The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change.  This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience. Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure.

For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available!  Our experience with spherical front control arm ball joints goes back to those we designed and used in our IMSA E90 328i and E92 M3 race cars (GS class Champions in 2011). We wanted to offer as many BMW owners possible a similar level of handling, precision, and control for the track and street.

Utilizing a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise.  We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting. The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment.  What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

We offer these control arms with the monoball bearings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms.

Control Arm Bearing

• CNC machined corrosion resistant 304 Stainless steel shell, bolt sleeves, & snap rings
• Sealed spherical ball joint for long service life & maintained OE fitment
• Suspension pre-load is no longer required when torquing the control arm hardware

Thrust Arm Bearing:

• OEM BMW sealed, greased ball joint for exceptional durability and service life, even in the most severe operating conditions
• 6061-T6 anodized housing for excellent corrosion resistance
• Proprietary Turner designed knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands
• CNC machined 304ss, providing a precision fit between the ball joint and the subframe

Benefits of Both:​

• Nearly instantaneous, crisp steering and braking response.
• Maintenance free, long lasting performance.
• Improved road feel without undesirable NVH.

Here at Turner we understand the importance of an upgrade that will get the results you need on the track and still be tolerable on the drive around town. When it comes to control arms on the track, making them as stiff as you can (usually using solid mounts) is the best way to increase your driving precision by eliminating the deflection of rubber. The next best thing to create a balance would be to stiffen up the control arm with polyurethane, giving you the option of a more stock like feel with 80a or closer to the solid feel with 95a durometers. These poly bushings will give your control arms a direct connection between your suspension and the body of the car eliminating the slop felt under take-off and braking so you feel more in control of your vehicle. 

Already pressed into bracket so you can get right to the install.

*Featuring a delrin sleeve to eliminate heat deformation and premature failure.

This item fits the following BMWs that use a centered-style bushing: 

2001-2006 E46 BMW M3 

Building on years of building some of the most used (and talked about!) Street and Race camber plates for the E46 M3 has brought us to the next iteration of this key suspension component. Introducing the Turner Motorsport Hybrid Street/Track Caster/Camber Plate designed exclusively for the E46 M3. 

Front caster/camber plates play a key role in suspension configuration - providing a point to adjust alignment in the front of the vehicle. Without camber plates, it is not possible to dial in proper street and track alignment specifications to maximize handling and tire wear. A properly configured alignment is frequently the difference between a good car and a great car, trailing the pack and pace-setting lap times, frustrating tire wear and long tire life, or exhilarating handling and a car that fights through the turns. 

Understanding the needs of a track enthusiast, our Race camber plates allow for zero deflection and are ideal for a dedicated track vehicle. For a dedicated street vehicle, our Street camber plates are another tried-and-true option that are comfortable and perform very well. Hearing the call from customers that don't fall cleanly into one of these groups, we've designed the best of both worlds - a rebuildable polyurethane-isolated spherical bearing, or as we call it, a "hybrid" design. These camber plates deliver exceptional lifespan, high performance, with excellent road manners. 

We paid extra attention to the bearing we selected, knowing we needed a bearing that would not only be quiet, but reliable. Tens of thousands of street and track miles on a variety of applications yielded zero failures of the high quality PTFE-lined, maintenance-free stainless steel monoball spherical FK bearing. One of our secrets in enabling this high-performance bearing to function to its full potential is the 80a polyurethane isolation bushing. We identified just the right material density to allow for absorption of road noise while allowing dampers to articulate precisely and predictably. This tiny bit of cushion takes the brunt of potholes and rough roads, protecting the bearing from wear which may otherwise lead to premature failure. Equally critical to maximizing bearing life is the addition of dust seals to prevent moisture and dirt contamination.  To top it all off, the entire assembly is rebuildable in the event that, over the years, a component does wear out. 

By re-using the OEM spring perch and radial bearing, we've avoided supporting the weight of the vehicle on the strut shaft monoball - further extending the life of the bearing and mimicking a well-designed factory element. Spring perches for 60mm or 2.5" springs are also available; use of factory-style springs requires no additional perch. Inspect the shocks you plan on using these with, measuring the shock diameter (16mm or 14mm) and inspecting the seat (square or tapered) to ensure you select the correct kit for your application. Not sure which you need? Give us a call, we're happy to help. 

• Adjustable camber (3+ degrees of adjustment) and caster (2.5+ degrees of adjustment) without removing strut from the vehicle
• Wide plate assembly offers excellent load distribution to address concerns with strut tower deformation
• Compatible with factory-style springs, or with the addition of available 60mm or 2.5" perches, race-style springs as well
• Maintenance free, PTFE lined, stainless steel monoball spherical bearing for full shaft articulation
• 80A polyurethane isolation bushings for noise, vibration, and harshness (NVH) control
• Rebuildable bushing/bearing assembly with individually replaceable components

Turner Motorsport Hybrid Street/Track Camber Plates: content on the street, ready to rip on the track.

Click here for installation instructions.

This item fits the following BMWs:
2001-2006 E46 BMW M3

BMW’s are known to have failure prone front thrust arm bushings.  The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change.  This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience.  Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. 

For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available!  Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).  We wanted to offer E31, E32, E34, E38, E39, E53, E60, E63, E64, and E83 owners similar levels of handling precision and control for the track and street. 

The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise.  We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting.  The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment.  What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

We offer these thrust arms with the monoball bushings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms.

Features:

Bearing housing

• Precision CNC machined from 6061-T6 blue anodized aluminum
• Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands.
• CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. 

Bearing

• OEM BMW sealed and greased ball joint for exceptional durability and service life.

Performance

• Nearly instantaneous, crisp steering and braking response.
• Maintenance free, long lasting performance. 
• Improved road feel without undesirable NVH.

Sold as a pair for RWD models only.
 

This item is an upgrade to the following BMWs: 

2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i M5
2004-2011 E63/E64 BMW 645ci 650i M6

BMW’s are known to have failure prone front thrust arm bushings.  The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change.  This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience. Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure.

For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available!  Our experience with spherical front control arm ball joints goes back to those we designed and used in our IMSA E90 328i and E92 M3 race cars (GS class Champions in 2011). We wanted to offer as many BMW owners possible a similar level of handling, precision, and control for the track and street.

Utilizing a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise.  We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting. The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment.  What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

We offer these control arms with the monoball bearings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms.

Control Arm Bearing

• CNC machined corrosion resistant 304 Stainless steel shell, bolt sleeves, & snap rings
• Sealed spherical ball joint for long service life & maintained OE fitment
• Suspension pre-load is no longer required when torquing the control arm hardware

Thrust Arm Bearing:

• OEM BMW sealed, greased ball joint for exceptional durability and service life, even in the most severe operating conditions
• 6061-T6 anodized housing for excellent corrosion resistance
• Proprietary Turner designed knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands
• CNC machined 304ss, providing a precision fit between the ball joint and the subframe

Benefits of Both:​

• Nearly instantaneous, crisp steering and braking response.
• Maintenance free, long lasting performance.
• Improved road feel without undesirable NVH.

BMW’s are known to have failure prone front thrust arm bushings.  The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change.  This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience.  Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. 

For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available!  Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).  We wanted to offer E31, E32, E34, E38, E39, E53, E60, E63, E64, and E83 owners similar levels of handling precision and control for the track and street. 

The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise.  We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting.  The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment.  What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

We offer these thrust arms with the monoball bushings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms.

Features:

Bearing housing

• Precision CNC machined from 6061-T6 blue anodized aluminum
• Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands.
• CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. 

Bearing

• OEM BMW sealed and greased ball joint for exceptional durability and service life.

Performance

• Nearly instantaneous, crisp steering and braking response.
• Maintenance free, long lasting performance. 
• Improved road feel without undesirable NVH.

This item is an upgrade to the following BMWs: 
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si 

BMW E46 Turner Motorsport Front Control Arm Performance Kit: Upgrade Your BMW's Handling

• Improves handling and steering response
• Enhances cornering stability and control
• Reduces flex and play in the front suspension
• Durable construction ensures long-lasting performance

Enhance the performance of your BMW with the BMW E46 Turner Motorsport Front Control Arm Performance Kit. This kit is designed to improve handling and steering response, providing a more dynamic driving experience. With enhanced cornering stability and control, you'll feel confident taking on corners and curves. The kit also reduces flex and play in the front suspension, resulting in improved overall handling characteristics. Plus, its durable construction ensures long-lasting performance, making it a reliable upgrade for BMW enthusiasts.

When you're looking for a control arm upgrade for your M3 this Turner Motorsport package is unrivaled, featuring their popular monoball bearing to replace the failure prone rubber bushing. The upgrades for this product aren't only that they will outlast everything else you can put on your car. These monoballs offer much smoother, more responsive steering that allows the front control arm to articulate more naturally instead of fighting against the suspension causing deflection.

Stock rubber front control arm bushings are designed to allow significant fore/aft movement of the front wheels to help absorb road impacts.  This soft flexible design maximizes daily driving comfort and helps to add the “luxury” feeling to your BMW, but it is far from ideal for the performance or racing enthusiast that is looking for optimal handling and braking performance.  Being a bonded rubber bushing that is constantly twisting and deflecting when in use, stock rubber bushings take a beating and often fail prematurely, resulting in further degraded handling, braking shimmy or even clunking felt under your feet.

In the past, the only upgrade option to improve handling of your E46 M3 was to replace the stock rubber with poly bushings, or delrin bushings that wear prematurely and are not serviceable or rebuild-able.  While well-designed poly bushings can vastly improve handling characteristics and offer good road feel with minimal increase to NVH, they are still a compromise when it comes to ultimate handling and braking performance.

Introducing the new Turner Front Control Arm Spherical Bearings!  The Turner engineering team set out to design a no-compromise solution that requires no modification and offers instantaneous cornering and braking response.  Our control arm bearings utilize a unique grease-able spherical bearing that is both serviceable and replaceable, with integrated dust seals to help keep dirt and moisture out.  This bearing offers considerable improvement in both precision and durability compared to other unsealed poly and delrin bushing inserts previously available, which can wear prematurely due to contamination.  The bearing assembly utilizes the highest quality materials, precision machining quality, and components to ensure a perfect fit and longest lasting component life possible.

The result is the ultimate in terms of low friction, no binding, and no unwanted deflection, as well as exceptional steering precision, turn-in response, and direct braking feedback with minimal increase in NVH.  These spherical bearings are a must have for any track car, but are also completely street-able and are a great upgrade for any enthusiast that enjoys spirited driving.

Features:

• Paired with Lemforder control arms
• Made in America

Bearing

- Extremely robust, grease-able, double lip sealed spherical bearing (Rated for 20,000lbf Dynamic, 90,000lbf Static). 

Housing

- 6061-T6, anodized housing with needle grease zerk for easy maintenance. 

- In house designed knurled OD to provide the perfect fit for the wide range of housing diameters among brands. 

Bearing Insert Arm adapter

- Precision CNC machined Delrin, providing a tight fit between the bearing and the control arm. 

Performance

- Instant, crisp steering and braking response.

- Easy to maintain, long lasting performance. 

- Improved road feel without undesirable NVH.

Grease before installation and with each oil service with high quality Moly grease for maximum service life. Grease fitting tool - ES#3410138 Access Secret Premium Dashboard

BMW’s are known to have failure prone front thrust arm bushings.  The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change.  This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience. Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure.

For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available!  Our experience with spherical front control arm ball joints goes back to those we designed and used in our IMSA E90 328i and E92 M3 race cars (GS class Champions in 2011). We wanted to offer as many BMW owners possible a similar level of handling, precision, and control for the track and street.

Utilizing a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise.  We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting. The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment.  What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

We offer these control arms with the monoball bearings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms.

Features:

Control Arm Bearing

• CNC machined corrosion resistant 304 Stainless steel shell, bolt sleeves, & snap rings
• Sealed spherical ball joint for long service life & maintained OE fitment
• Suspension pre-load is no longer required when torquing the control arm hardware

Performance

• Nearly instantaneous, crisp steering and braking response.
• Maintenance free, long lasting performance.
• Improved road feel without undesirable NVH.

Fits the following BMW models:
E60/61 - RWD 525i, 528i, 530i, 545i, 550i, M5
 

Modern BMW's are beginning to leave the performance derived handling and power delivery in the past as the demand for more comfort and features rises. The stiff suspension components designed around having the best driving experience from a luxury car has been left for the M models and replaced with soft rubber bushings and mounts. Unfortunately, this is a good move by BMW to support the masses.

The obvious approach was to offer products so the modern BMW can be upgraded into the car the enthusiast desires, superb handling, control, and a direct delivery of power to the rear wheels. When you upgrade to our Delrin subframe mounts you reconnect that power with almost zero negative feedback.

The added appeal to someone looking to take one of these machines on the race track is Delrin can be used when solid mounts are needed and aluminum is not an option with strict regulations found in??Grand-Am, BMW CCA, and other racing series.

Product features:

• Precision machined Delrin(TM) 150 bushings.
• Precision machined 6061-T6 aluminum inserts.?
• Class legal for any racing class that does not allow a solid subframe bushing.?

Performance Benefits:

• Eliminates subframe movement for more direct throttle and suspension? response.?
• Minimizes wheel hop due to subframe deflection and movement.?

?

***Installation Instructions***

These GAC differential bushings/mounts fit the following BMWs:?
2014+?F22 BMW?228i 228iX M235i M235iX?
2012+?F30 BMW?320i 320iX 328i 328iX 335i 335iX - Sedan?
2014+?F34 BMW?328i 328iX 335iX - Gran Turismo?
2014+?F32 BMW?428i 428iX 435i 435iX - Coupe?
2014+?F33 BMW?428i 428iX 435i 435iX - Convertible

2014+?F36?BMW?428iX -Gran Coupe?