Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
BMW E36 Shark Injector Performance Software is the ultimate upgrade for boosting the power and torque of your BMW. This performance software, meticulously dyno-tuned by BMW expert Jim Conforti, is engineered to enhance the potential of high-octane (91+) pump gas, significantly increasing mid-range torque and high-RPM horsepower. The Shark Injector also features an increased rev limit, fine-tuned fuel and spark maps, and optimized performance, ensuring that your BMW exceeds its factory capabilities. The installation is straightforward, typically taking just an hour, and maintains drivability while improving responsiveness.
Note: The Shark Injector software is specifically designed for NORTH AMERICAN SPEC BMWs and is not compatible with EURO-SPEC models.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
 E46 330i dyno chart | HP Gain | + 4 @ 6100 RPM | |
| Torque Gain | + 7 @ 3400 RPM | ||
| New Rev Limit | 7000 RPM |
330i ZHP dyno chart | HP Gain | + 14 @ 6400 RPM | |
| Torque Gain | + 11 @ 4100 RPM | ||
| New Rev Limit | 7000* RPM |
Shark Injector installation instructions
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Performance software is a must-have upgrade on your BMW and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!
The M52TU performance software was developed on the dyno to create maximum power and torque using premium 91+ octane fuel while maintaining BMW reliability and smoothness. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. We also raise the rev limit to 7,000 and remove the top speed limiter. By fine tuning these maps we've been able to improve the M52TU engine beyond what BMW did by making more power and torque and a smoother-running engine.
The Shark Injector plugs into the diagnostic port inside the Z3 cabin. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.
1999-2000 Z3 2.3 (M52TU engine) Performance Software Peak Gains
2.3 dyno chartHP Gain Up To + 14 @ 6000 RPM
Torque Gain Up To+ 6 @ 5000 RPM
New Rev Limit7000 RPM
Read what others are saying!
(click to expand)
DBALZE, 323Ci: "The shark injector is awesome! After I put it in, I could definitely feel the quicker throttle response and more power throughout the acceleration curve. Definitely worth the money to me!"
chrisct, 323Ci: "I installed an XXX short ram cold air intake and the shark injector on my 323Ci and I couldn't be happier. For me the biggest advantage was smoothing out the throttle response, but it definitely feels snappier."
hqbmw, 328Ci: "This Shark really woke up my 328Ci. Cost per performance increase is as good as it gets! Also getting 10 to 15% better fuel economy in "normal" driving."
huyner328, 328Ci: "First change I would like to mention is the increased throttle response, as soon as I shifted and floored it, the car would pull. From 3400rpms to about 5000rpms I think was the sweet spot that gave me a nice little grin on my face. Next I tested the Redline of my car, yup another grin on my face. I definitely noticed that the car moved a little bit quicker with not as much gas consumption on the MPG Gauge. Overall, awesome mod."
Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.
Shark Injector FAQ
(click to expand)
This item fits the following BMWs:
1999-2000 Z3 BMW Z3 2.3
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Performance software is a must-have upgrade on your BMW and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!
The M54 performance software was developed on the dyno to create maximum power and torque using premium 91+ octane fuel while maintaining BMW reliability and smoothness. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. A lot of tuning has been done at the low RPM ranges to improve response. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. We also raise the rev limit to 7,000 and remove the top speed limiter. By fine tuning these maps we've been able to improve the M54/M56 engine beyond what BMW did by making more power and torque and a smoother-running engine.
The Shark Injector plugs into the diagnostic port inside the E46 cabin. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.
2001-2006 E46 325i (M54/M56 engine) Performance Software Peak Gains
E46 325i dyno chartHP Gain Up To+ 7 @ 5800 RPM
Torque Gain Up To + 7 @ 4700 RPM
New Rev Limit7000 RPM
E46 325 M54 vs. M56 Engines
(click to expand)
Does your 325 have the M56 "SULEV" Engine? Many of the 325's produced for the US -- particularly in California, Massachusetts, and a few other states -- came with a different engine, the M56 which meets "SULEV" (Super Ultra Low Emission Vehicle) emissions classification. A visual inspection of your engine (as shown below) is the best way to determine if your 325 has the M56 SULEV engine.
Read what others are saying!
(click to expand)
greekpsycho, 325i: "I sharked my 325 a few months ago and I noticed a huge difference. This REALLY brought out the best of my car."
TJ710, 325i: "just did this to my own stock 325i about 3 weeks ago and I definitely felt a difference and it put a smile on my face."
Dahmwern, 325Ci: "I'm definitely noticing a sweetly smooth power delivery, as well as a noticeable power increase in the low end as you being to accelerate (especially up moderate inclines). Note: This is NOT placebo effect. I drove the same route before and after to compare, and while its not perfectly scientific, it was quite obvious that there were some changes that took place - changes for the better. Like many mods, the car should have come this way!"
Rob43, 330i: "besides the 7000rpm, removal of the top speed limiter, and very good(improved) throttle response, I got 6.5WHP on the dyno with my Shark injector. That’s worth $300 bucks in my book."
xixixi, 330xi: "I got the shark for my 330xi, I love it. Shark > all. Why? It gives gains that other "custom tunes," can't. What I liked the most about my shark is shift points. If you can shift decent, you can stay in the 5.5k+ range."
Douglas, 330Ci: "Just last week I had your Shark Injector installed in my 2001 330Ci. What a difference it makes! I already loved the car and it’s a great car to drive, but this takes it to a new level."
Steve 330i: "I bought the software and CAI by Jim C. Installed both at the same time and have put around 500 miles on over the last month. The car is amazing to drive, and the software seemed to make the power band a bit flatter, less of a dip and a bit better at the lower RPMS."
nleksan, 330i ZHP: "Ditch the Brand XXXXX software and switch it up for the newly-released Conforti Shark Injector for your car. It will give you a higher redline, no top-speed, more power, and much better throttle response, even over the Brand XXXXX."
3579az, 330i ZHP: " The throttle response problem has been solved. I can now perform perfect rev-matches with ease, unlike before. I've been heel-and-toe downshifting all day with a major success rate of perfect shifts, which is a LOT more than could be said compared to stock. I can now pull cleanly through the rev range without feeling any hesitation or dead spots. I have confirmed that the dead spot that was painfully obvious before the flashing… is gone."
pyreguy, 330i ZHP: "I have been VERY pleased with mine. The dead spot being irradiated was the best thing EVER."
Scott, 330i ZHP: "Very increased acceleration - especially from around 3,000 to 6,000. The car feels like a bullet! It is the same smooth kind of power too - just more of it, delivered continuously to the top rpm. So 3rd feels more like 2nd gear now! Throttle transitions are much more refined. So when in low gears, on and off throttle changes are very seamless and smooth (no jerking) - and the change has made shifting gears easier - especially first to second. So now my car is much more fun to drive and shows engine performance that is better matched to the incredible handling ability it has. I'm very pleased with this upgrade and can't thank you enough!!!
Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.
Shark Injector FAQ
(click to expand)
This item fits the following BMWs:
2001-2006 E46 BMW 325i 325ci 325xi
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Are you searching for the simplest way to boost the power and torque of your BMW? Look no further than the Shark Injector. This cutting-edge software, expertly dyno-tuned by BMW tuning legend Jim Conforti, is meticulously crafted to optimize the capabilities of high-octane (91+) pump gas. It elevates mid-range torque and high-RPM horsepower to deliver an exhilarating driving experience.
Here's why the Shark Injector is a must-have for BMW enthusiasts:
Jim Conforti meticulously tailored the Shark Injector for the BMW M54 engine, already renowned for its precision. This upgrade delivers an additional 7 HP and 7 lb/ft of torque, enhancing engine response, and eliminating the speed limiter. The rev limit is raised to 7,000 RPM, unlocking the full potential of your BMW and enhancing your driving experience, particularly under various throttle conditions.
Please note: The Shark Injector software is exclusively compatible with NORTH AMERICAN SPEC BMWs and is not suitable for EURO-SPEC BMWs.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Elevate your BMW's performance effortlessly with the Shark Injector, the quickest route to increased power and torque. This software, meticulously dyno-tuned by the BMW tuning legend Jim Conforti, is engineered to maximize high-octane (91+) pump gas, enhancing mid-range torque and high-RPM horsepower. The Shark Injector excels in raising the rev limit and refining fuel and spark maps to unleash the full potential of your BMW. Rest assured, there are no drawbacks to installing this Shark Injector; it's designed for safe performance enhancement while preserving drivability and responsiveness. Every unit is shipped with comprehensive instructions, making it a true plug-and-play performance solution.
Installation is a breeze. Simply connect a battery charger to ensure backup power for your car battery, plug in the Shark Injector, and press the button to initiate the process. The Shark Injector replaces specific components of the stock software while storing the original data for potential future use. When the LED switches from red to green, you're ready to relish your BMW's enhanced performance.
Jim Conforti fine-tuned this Shark Injector for BMW's M54 engine, elevating it to a whole new level. Experience an extra 4 HP and 7 lb/ft of torque, coupled with improved engine response and a raised rev limit of 7,000 RPM. The speed limiter is also removed, unlocking the full capabilities of your BMW. The result is a significantly improved driving experience, especially during part-throttle and wide-open throttle acceleration.
Performance Highlights:
Please note that the Shark Injector software is exclusively compatible with NORTH AMERICAN SPEC BMWs and may not function correctly with EURO-SPEC BMWs.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
HP Gain Up To+ 7 @ 5800 RPM
Torque Gain Up To + 7 @ 4700 RPM
New Rev Limit7000 RPM
M54 engine dyno chart -
E46 325, Z3 2.3 (2.5-liter)
Read what others are saying!
(click to expand)
MinnMark: "To me it changed in overall responsiveness, feel at the low end of the revs, and just an aggressiveness to the engine that wasn't there previously. I would not go back to the factory settings!"
whereyat: "I had the Shark Injector upgrade done. It has been great. Last year I installed the Cold Air Intake And can remember noticing a definite difference in the performance. To sum it up I have never regreted spending the bucks on the upgrade. I feel it was well worth it."
Daredevilmo3: "It was definitely a noticeable change. A great upgrade for its price."Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.Shark Injector FAQ
(click to expand)
Shark Injector FAQ
This item fits the following BMWs:
2001-2002 Z3 BMW Z3 2.5i
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
The Shark Injector is the ultimate solution for effortlessly boosting power and torque in your BMW. This software, meticulously dyno-tuned by BMW tuning legend Jim Conforti, is engineered to optimize high-octane (91+) pump gas, enhancing mid-range torque and high-RPM horsepower. It delivers an elevated level of performance without compromising your BMW's integrity, making it the easiest way to unlock untapped potential.
The Shark Injector is meticulously designed to safely improve performance while enhancing driveability and responsiveness. Installation is a breeze - simply connect a battery charger to ensure your car battery has backup power, plug in your Shark Injector, and initiate the process with the push of a button. While the Shark Injector replaces parts of the stock software, it also stores the original data in the unit for future use if needed. When the LED changes from red to green, you're ready to experience your BMW's enhanced performance.
The BMW M52TU engine is already finely tuned, but there are still ample opportunities to elevate your driving experience. Jim Conforti has expertly fine-tuned this Shark Injector to enhance various aspects, from fuel maps and ignition timing to VANOS operation. The result is an impressive addition of 15 HP and 12 lb/ft of torque. Engine response is significantly improved, and the rev limit is raised to 7,000 RPM. Additionally, the speed limiter is removed, unlocking your BMW's full potential. Enjoy a vastly improved driving experience, especially during part-throttle and wide-open throttle acceleration.
It's important to note that Shark Injector software is ONLY compatible with NORTH AMERICAN SPEC BMWs and is not designed for EURO-SPEC BMWs.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Experience a simple and effective method to boost the power and torque of your BMW with the Shark Injector. This expertly dyno-tuned software, crafted by renowned BMW tuning expert Jim Conforti, is engineered to maximize the performance potential of high-octane (91+) pump gas. It delivers an impressive increase in mid-range torque and high-RPM horsepower while raising the rev limit and meticulously fine-tuning fuel and spark maps. The outcome? Your BMW's performance exceeds its factory capabilities. Installing the Shark Injector carries no drawbacks; it's tailor-made to enhance performance, maintain drivability, and elevate responsiveness safely. Each unit is accompanied by detailed instructions and typically requires just an hour for installation, providing a true plug-and-play performance solution.
Installation is a breeze. Simply connect a battery charger to ensure continuous power to your car battery, plug in the Shark Injector, and commence the process with the push of a button. The Shark Injector replaces portions of the stock software while securely storing the original data within the unit for potential future use. Once the LED transitions from red to green, your BMW is primed to unleash its newfound performance.
While the BMW M54 engine is a marvel of precision engineering, there's still room for enhancing the driving experience. Jim Conforti has meticulously tuned this Shark Injector to deliver an extra 7 HP and 7 lb/ft of torque, resulting in improved engine responsiveness, an increased rev limit of 7,000 RPM, and the removal of the speed limiter. These enhancements unlock your BMW's full potential, significantly improving the driving experience, especially during part-throttle and wide-open throttle acceleration.
Kindly note that Shark Injector software is exclusively compatible with NORTH AMERICAN SPEC BMWs and is not intended for EURO-SPEC BMWs.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
E46 323 dyno chart HP Gain Up To+ 14 @ 6000 RPM
Torque Gain Up To+ 6 @ 5000 RPM
New Rev Limit7000 RPM
1999-2000 E46 328i (M52TU engine) Performance Software Peak Gains
E46 328i dyno chartHP Gain+ 15 @ 6200 RPM
Torque Gain+ 12 @ 3500 RPM
New Rev Limit7000 RPM
Read what others are saying!
(click to expand)
DBALZE, 323Ci: "The shark injector is awesome! After I put it in, I could definitely feel the quicker throttle response and more power throughout the acceleration curve. Definitely worth the money to me!"
chrisct, 323Ci: "I installed an XXX short ram cold air intake and the shark injector on my 323Ci and I couldn't be happier. For me the biggest advantage was smoothing out the throttle response, but it definitely feels snappier."
hqbmw, 328Ci: "This Shark really woke up my 328Ci. Cost per performance increase is as good as it gets! Also getting 10 to 15% better fuel economy in "normal" driving."
huyner328, 328Ci: "First change I would like to mention is the increased throttle response, as soon as I shifted and floored it, the car would pull. From 3400rpms to about 5000rpms I think was the sweet spot that gave me a nice little grin on my face. Next I tested the Redline of my car, yup another grin on my face. I definitely noticed that the car moved a little bit quicker with not as much gas consumption on the MPG Gauge. Overall, awesome mod."Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.Shark Injector FAQ
(click to expand)
Shark Injector FAQ
This item fits the following BMWs:
1999-2000 E46 BMW 323i 323ci 328i 328ci
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Enhance your MINI's performance effortlessly with the Shark Injector, the ultimate solution for adding power and torque. Developed by BMW tuning legend Jim Conforti, this software is optimized for high-octane (91+) pump gas, delivering improved mid-range torque and high-RPM horsepower. With a raised rev limit and fine-tuned fuel and spark maps, the Shark Injector ensures your MINI surpasses factory performance without compromising driveability. Benefit from a seamless, plug-and-play installation, typically completed within an hour.
Unlock the full potential of your MINI W11 engine, transforming your driving experience under various throttle conditions.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Revitalize your BMW's performance effortlessly with the Shark Injector, the easiest solution to add power and torque. Dyno-tuned by BMW legend Jim Conforti, this software optimizes high-octane (91+) pump gas, enhancing mid-range torque and high-RPM horsepower. The rev limit is raised, and fuel and spark maps are fine-tuned for improved performance without compromising driveability. A true plug-and-play solution, each unit is shipped with detailed instructions, ensuring a swift installation in just an hour.
Unleash the full potential of your BMW's M54 engine with the Shark Injector, designed for a superior driving experience.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
HP Gain Up To + 4 @ 6100 RPM
Torque Gain Up To + 7 @ 3400 RPM
New Rev Limit7000 RPM
M54 engine dyno chart -
E39 530, E46 330, Z3 3.0
Read what others are saying!
(click to expand)
kniffin50: "Best thing I did to my 2001 3.0. I like the smooth take offs and the new power bands."
z3RIFFRAFF: "I have a 2002 3.0 that I sharked without any problems. The only thing you will regret is waiting so long to do it!"
bigbird: "I installed my Conforti Shark injector yesterday. My impression after about 30 miles of driving is that the throttle response is quicker. I also like that the rev limiter no longer interferes with a quick row through the lower gears. It seems to idle a little higher, too. The overall feeling is of more and quicker "punch" when you nail the throttle. It's not a night-and-day kind of a difference, but most definitely noticeable. My wife drove the car about 50 miles and she said that it shifts smoother, is more responsive and even feels a little faster. One more thing; the install was painless and the directions were very good."Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.Shark Injector FAQ
(click to expand)
Shark Injector FAQ
This item fits the following BMWs:
2001-2002 Z3 BMW Z3 3.0i
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Unlock the full potential of your BMW effortlessly with the Shark Injector, offering the easiest way to enhance power and torque. Tuned by BMW legend Jim Conforti, this software optimizes high-octane pump gas for mid-range torque and high-RPM horsepower. The Shark Injector is designed for seamless installation, providing a true plug-and-play performance solution that takes only an hour. Enjoy improved performance without compromising driveability.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Shark Injector V2.0 Performance Software includes:
Performance software is a must-have upgrade on your E46 M3 and you won't find an easier and better software solution than the Shark Injector. This device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before.
Building on the super-simple-to-use original Shark Injector, our new V2.0 capitalizes on this simplicity while heightening the driving experience with more power! Have a tune from the previous Shark Injector version - and want more power? Upgrades from Shark V1.0 to V2.0 are available. Give us a call and we'll be happy to discuss upgrades.
Our newest M3 performance software was developed on the dyno to create maximum power and torque using premium 91 octane fuel and revising the torque limiters in the ECU, although even more power is to be had using 93 octane fuel. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM, with serious power to be found over 4,000 RPM. By fine tuning these maps we've been able to improve the S54 engine beyond what BMW did by making more power and torque and a smoother-running engine. The top speed limiter is removed, and rev limiter lifted to 8,250 RPM.
E46 M3 Dyno
Power and Torque Gains
Stock software: 283 whp / 232 wtrq
Shark Injector V2.0: 301 whp / 243 wtrq
Peak gain 18whp and 11wtq
(note: the max gain (biggest improvement) is 22whp at 6400 RPM, with 16wtq at 5600 RPM)
The Shark Injector plugs into the diagnostic port inside the E46 cabin. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box!
Looking to maximize your power gains? Add a Turner IAT Relocation to combat power-robbing heat soak - the only true plug-and-play solution available. Heat soak is a real plague on consistent power for a stock or tuned vehicle. Click here to read more about our IAT relocation kit.
Shark Injector installation instructions
Shark Injector FAQ
This item fits the following BMWs:
2001-2006 E46 BMW M3 (US models only)
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Shark Injector Info Center
Mini Shark Injector installation instructions
This item fits the following BMWs:
2002-2006 R53 MINI MINI Cooper S (manual transmission only)
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Shark Injector Performance software includes:
Performance software is a must-have upgrade on your E39 M5 and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!
The M5 performance software was developed on the dyno to create maximum power and torque using premium 91+ octane fuel and revising the torque limiters in the ECU. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. The stock software artificially limits torque output, especially in the first three gears. We raised the torque limiters in all gears so there is more torque available. You will see an immediate difference as soon as you leave your driveway! Choose between a stock 7,000 or raised 7,400 RPM rev limit. The top speed limiter is removed. By fine tuning these maps we've been able to improve the S62 engine beyond what BMW did by making more power and torque and a smoother-running engine.
Gains of up to 23 hp @ 6100 rpm and 19 lb/ft torque @ 5000 rpm!!!
We used several E39 M5s on our dyno to establish what the average/typical power numbers are. The dyno charts on the right are from the same car - a 2003 E39 M5 that was already equipped with intakes, mufflers, and running 93 octane. For our Shark Injector dynos we made baseline runs with the stock software and then runs in 3rd gear and 4th gear. The only changes to the car was the Shark Injector software. Why did we post dyno runs in different gears? The 3rd gear run shows the torque gain with the new torque limiters in the software. The 4th gear run is posted to be consistent with the industry-standard of dyno-ing cars in 4th gear. Note: comparing dyno results and wheel horsepower numbers from one shop to another is not advised. What really matters is the gain from stock to modified from the same car on the same dyno.
Product Options:
Octane: Choose either 91 or 93 minimum octane. For 93 we can be more aggressive with the timing and get more power. But you must have 93+ octane available, using the 93 version with anything less is not recommended.
Throttle Setting: Choose an aggressive throttle response or a smoother, linear setting. The Shark enhanced throttle will be much quicker and more in line with the Motorsport inspiration of the M5. The Euro throttle is more linear in response and smoother than the stock US or Shark throttle. The Euro throttle is also known as the 'M5Board tune'. Our customers are split 50/50 so there is no "best throttle" mapping - it's personal preference.
Rev Limit: Choose a stock 7,000 RPM or raised 7,400 RPM rev limit. The raised rev limit is great for track or autocross where you can stay in gear longer and avoid untimely upshifts. The stock rev limit is for the non-track customer who wants all of the other benefits without the need to rev beyond the stock setting.
DSC/Sport Mode: This option will make Sport Mode active only when DSC is turned off. The Sport Mode button is disabled altogether so the only way to get Sport is to disable DSC.
The Shark Injector plugs into the diagnostic port inside the E39 cabin. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.
Looking to maximize your power gains? Add a Turner IAT Relocation to combat power-robbing heat soak - the only true plug-and-play solution available. Heat soak is a real plague on consistent power for a stock or tuned vehicle. Click here to read more about our IAT relocation kit.
This part alters or deletes the emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Shark Injector Performance software includes:
Performance software is a must-have upgrade on your E39 M5 and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!
The Sport Mode Memory option will remember if you left the car in Sport Mode or not. When you restart the car it will be in the last setting you used. This is perfect for owners who use Sport Mode all the time. You won't have to remember to press the button each time you start the car. The Sport Mode button functions the same as before so you can turn Sport on/off at any time. The software will remember which one you left it in.
The M5 performance software was developed on the dyno to create maximum power and torque using premium 91+ octane fuel and revising the torque limiters in the ECU. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. The stock software artificially limits torque output, especially in the first three gears. We raised the torque limiters in all gears so there is more torque available. You will see an immediate difference as soon as you leave your driveway! Choose between a stock 7,000 or raised 7,400 RPM rev limit. The top speed limiter is removed. By fine tuning these maps we've been able to improve the S62 engine beyond what BMW did by making more power and torque and a smoother-running engine.
Looking to maximize your power gains? Add a Turner IAT Relocation to combat power-robbing heat soak - the only true plug-and-play solution available. Heat soak is a real plague on consistent power for a stock or tuned vehicle.
Gains of 23 hp @ 6100 rpm and 19 lb/ft torque @ 5000 rpm!!!The Shark Injector plugs into the diagnostic port inside the E39 cabin. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.
This item fits the following BMWs:
1999-2003 E39 BMW M5
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
You may be able to upgrade the Shark Injector file to another version to better meet your tuning needs. Depending on the model we may have better tunes for things such as intakes, larger air sensors, camshafts, headers, and others. For a small fee the current Shark Injector tune can be removed and a new file added instead (the original Shark file you were using would no longer be available). To do this, we need the car restored to stock settings with the current Shark Injector and then returned to us (updating via USB is not yet available). Sharks that were not Restored to stock cannot be upgraded and the unit will be returned to you (at your expense). We also perform other work on the Shark Injector while it is here, including diagnostic tests and re-packaging with the most current instructions. The Shark that you get back is virtually new and ready to be reinstalled!
To get started, review the catalog of current Shark Injector files for one that better matches your tuning spec.
1. Enter the new tuning file in the form below. Include any other relevant information.
2. Click the Update Price or Add To Cart button.
3. Complete the online transaction with your address and payment information.
4. A Turner Motorsport sales rep will contact you after your order has been submitted. Do not send in your Shark Injector until someone has contacted you with a reference number and return shipping address.
Turn-around time for upgrades is typically the same day we receive it. UPS Ground is the normal return shipping method unless you specify faster shipping on your order.
Helpful Links:
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Performance software is a must-have upgrade on your BMW and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!
The M52/S52 performance software was developed on the dyno to create maximum power and torque using premium 91+ octane fuel while maintaining BMW reliability and smoothness. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. We also raise the rev limit to 7,000 and remove the top speed limiter. By fine tuning these maps we've been able to improve the M52/S52 engine beyond what BMW did by making more power and torque and a smoother-running engine.
The Shark Injector plugs into the diagnostic port under the hood of the E36. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.
1996-1999 E36 323/328 (M52 engine) Performance Software Peak Gains
HP Gain Up To:+15 @ 6,400 RPM
Torque Gain Up To: +9 @ 4,500 RPM
New Rev Limit:7,000 RPM
+10 @ 4,000 RPM
E36 M3 dyno chartHP Gain:+12 @ 6,000 RPM
Torque Gain:
New Rev Limit:7,000 RPM
Read what others are saying!
(click to expand)
Anonymous, 323is: "I purchased my first Shark for my 1999 - 323is (e36). I installed it during work today and had a GREAT time driving home on I495. My wife actually had to call me to find out what was taking so long. She didn't know I was having the most fun I've had since I first purchased my BMW! I would definitely recommend this new product to all the 323is owners."
Gary, 328i: "I own a 1997 328i and recently installed the Conforti Shark Injector and Intake Kit, as well as a Borla exhaust and a B & M sport shift kit. I am very impressed with the amount of performance I was able to gain."
Manny, E36 M3: "Just "sharked" my E36 M3. All I can say is WOW. The car has never run so well. The idle and the engine overall is so smoooooth! The throttle is very responsive, power is right there. Very Nice! Never putting it back to stock! Just wanted to say job well done, and thanks."
Josh, E36 M3: "Just got done putting on my Supersprint exhaust, Shark injector and my intake, wow what a difference. Thank you guys for the performance, I will be a lifetime customer."
/>
Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.
Shark Injector FAQ
(click to expand)
This item fits the following BMWs:
1996-1999 E36 BMW 323is 323ic 328i 328is 328ic M3
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Stage 3 Performance Software for E36 M3, MZ3 (HFM/Cam Kit) (stock S52 manifold)
Conforti Shark Injector performance software tuned for our Stage 3 OBD2 package: Schrick camshafts, "24lb" injectors, Porsche 3.5" HFM, and intake. This software is tuned around the stock S52 intake manifold. For keeping the most useable torque we recommend using the stock manifold over the M50 part.
With this software you will notice more top end power, a broader torque band, and a smoother running engine. The rev limit is raised to 7000 RPM with the top speed limiter removed. Works with 91 or higher octane fuel.
Required:
"24lb" injectors (actually around 26lb injectors when used at the S52's 3.5 bar of fuel pressure). You must confirm the injector flow-rate at 3.5 bar before using this software. If the injectors were not purchased from us, we may as for the Bosch part number on your injectors.
Porsche 809 3.5" HFM (0 280 217 809) (TMS/Porsche HFM works best) with intake. Note: this will not work with a Euro HFM, 540 HFM, or Dinan HFM. Our software is programmed and written specifically for the Porsche 809 HFM! If you did not purchase the HFM Kit from us, we may ask you for the Bosch part number from your HFM.
Schrick camshafts
Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.
Shark Injector FAQ
(click to expand)
This item fits the following BMWs:
1996-1999 E36 BMW M3
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Unleash the full potential of your BMW's power and torque effortlessly with the Shark Injector, your ultimate solution for a performance boost. Expertly dyno-tuned by BMW legend Jim Conforti, this software is meticulously crafted for high-octane (91+) pump gas, prioritizing mid-range torque and high-RPM horsepower. Explore the benefits:
Revitalize your BMW's performance hassle-free with Shark Injector's expertly crafted software.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Performance software is a must-have upgrade on your BMW and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). This particular file includes Stage 1 engine tuning (fuel, ignition, timing upgrades) with EWS-delete programming. There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!
The M52/S52 performance software was developed on the dyno to create maximum power and torque using premium 91+ octane fuel while maintaining BMW reliability and smoothness. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. We also raise the rev limit to 7,000 and remove the top speed limiter. By fine tuning these maps we've been able to improve the S52 engine beyond what BMW did by making more power and torque and a smoother-running engine.
The programming for EWS delete will allow you to use a spare ECU to run the engine. If your original ECU fails, and you find yourself buying a used ECU, you won't have to tow the car to the dealer to have the ECU synced to the car's EWS system. This is also the perfect software solution if you installed an S52 engine in your E36 323/328 - just plug in the M3 ECU and flash with this Shark Injector. This Stage 1 file will bypass the EWS code and give you all of the benefits of our Stage 1 tune.
The Shark Injector plugs into the diagnostic port under the hood of the E36. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.
1996-1999 E36 M3 Performance Software Peak Gains
E36 M3 dyno chartHP Gain Up To:+12 @ 6,000 RPM
Torque Gain Up To:+10 @ 4,000 RPM
New Rev Limit:7,000 RPM
Read what others are saying!
(click to expand)
Manny, E36 M3: "Just "sharked" my E36 M3. All I can say is WOW. The car has never run so well. The idle and the engine overall is so smoooooth! The throttle is very responsive, power is right there. Very Nice! Never putting it back to stock! Just wanted to say job well done, and thanks."
Josh, E36 M3: "Just got done putting on my Supersprint exhaust, Shark injector and my intake, wow what a difference. Thank you guys for the performance, I will be a lifetime customer."
Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.
Shark Injector FAQ
(click to expand)
This item fits the following BMWs:
1996-1999 E36 BMW M3
1998-2000 Z3 BMWZ3 M Roadster M Coupe
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Elevate your BMW's performance effortlessly with the Shark Injector—the ultimate solution for adding power and torque. Engineered by BMW tuning legend Jim Conforti, this software is optimized for high-octane (91+) pump gas, enhancing mid-range torque and high-RPM horsepower. Unleash the potential of your BMW with these features:
Installation is a breeze—connect a battery charger, plug in your Shark Injector, and start the process. This innovative solution replaces stock software, storing original data for future use. When the LED turns from red to green, your BMW is ready to deliver enhanced performance.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
If you're seeking an effortless way to enhance your BMW's power and torque, the Shark Injector is your answer. Meticulously dyno-tuned by BMW tuning legend Jim Conforti, this cutting-edge software is designed to harness the full potential of high-octane (91+) pump gas, resulting in impressive mid-range torque and high-RPM horsepower. Explore the standout features of this remarkable product:
Shark Injector software is ONLY compatible on NORTH AMERICAN SPEC BMWs. It is not designed to, nor will operate properly on EURO-SPEC BMWs
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Stage 2 Performance Software for E36 M3, MZ3 (Turner-Porsche 3.5" HFM, larger injectors)
Conforti Shark Injector performance software tuned for our Stage 2 OBD2 package: larger fuel injectors, Porsche 3.5" HFM, and intake. This is the correct software to use with the desireable Porsche 803/809 HFM on the OBD2 E36 M3. You should not be running a larger HFM without software and injectors - you're in danger of running too lean! On the dyno we found that the stock fuel injectors were not capable of providing enough fuel to keep up with the increased airflow. This "leaner" fuel mixture was dangerous as it could lead to hotter combustion temps and burning or melting of critical components. With the correct HFM, larger injectors, and this software you will be back to running correct air-fuel ratios.
With this software you will notice more top end power, a broader torque band, and a smoother running engine. The rev limit is raised to 7000 RPM with the top speed limiter removed. Works with 91 or higher octane fuel.
Required:
"24lb" injectors (actually around 26lb injectors when used at the S52's 3.5 bar of fuel pressure). You must confirm the injector flow-rate at 3.5 bar before using this software. If the injectors were not purchased from us, we may as for the Bosch part number on your injectors.
Porsche 809 3.5" HFM (0 280 217 809) (TMS/Porsche HFM works best) with intake. Note: this will not work with a Euro HFM, 540 HFM, or Dinan HFM. Our software is programmed and written specifically for the Porsche 809 HFM! If you did not purchase the HFM Kit from us, we may ask you for the Bosch part number from your HFM.
Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.
Shark Injector FAQ
(click to expand)
This item fits the following BMWs:
1996-1999 E36 BMW M3
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Stage 4 Performance Software for E36 M3 (Turner HFM + Cams + Headers Kit)
Conforti Shark Injector performance software tuned for our Stage 4 OBD2 package: Schrick camshafts, performance headers, "24lb" injectors, Porsche 809 3.5" HFM, and intake. This software is tuned around the stock S52 intake manifold. For keeping the most useable torque we recommend using the stock manifold over the M50 part.
With this software you will notice more top end power, a broader torque band, and a smoother running engine. The rev limit is raised to 7000 RPM with the top speed limiter removed. Works with 91 or higher octane fuel.
Required:
"24lb" injectors (actually around 26lb injectors when used at the S52's 3.5 bar of fuel pressure). You must confirm the injector flow-rate at 3.5 bar before using this software. If the injectors were not purchased from us, we may as for the Bosch part number on your injectors.
Porsche 809 3.5" HFM (0 280 217 809) (TMS/Porsche HFM works best) with intake. Note: this will not work with a Euro HFM, 540 HFM, or Dinan HFM. Our software is programmed and written specifically for the Porsche 809 HFM! If you did not purchase the HFM Kit from us, we may ask you for the Bosch part number from your HFM.
Schrick camshafts
Performance Headers (TMS Shorty Headers or similar)
Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.
Shark Injector FAQ
(click to expand)
This item fits the following BMWs:
1996-1999 E36 BMW M3
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Stage 3+ Performance Software for E36 M3 (M50 Manifold + Cam Kit)
Conforti Shark Injector performance software tuned for the an awesome OBD2 package: M50 manifold, Schrick camshafts, "24lb" injectors, Porsche 3.5" HFM, and intake. This software makes full use of the benefits of the M50 manifold when used with cams and the HFM/intake. Without the software, you're not getting the full effect of these upgrades in the upper rev range. The stock software -- or a regular Shark Injector -- is tuned for low-end torque using the stock manifold and cams. It's like a marathon runner in a 40-yard dash -- he'll put in a good effort but won't be the quickest! Special attention was paid to the low-end and mid-range too so that torque was not lost with the M50 manifold.
With this software you will notice more top end power, a broader torque band, and a smoother running engine. The rev limit is raised to 7000 RPM with the top speed limiter removed. Works with 91 or higher octane fuel.
Required:
"24lb" injectors (actually around 26lb injectors when used at the S52's 3.5 bar of fuel pressure). You must confirm the injector flow-rate at 3.5 bar before using this software. If the injectors were not purchased from us, we may as for the Bosch part number on your injectors.
Porsche 809 3.5" HFM (0 280 217 809) (TMS/Porsche HFM works best) with intake. Note: this will not work with a Euro HFM, 540 HFM, or Dinan HFM. Our software is programmed and written specifically for the Porsche 809 HFM! If you did not purchase the HFM Kit from us, we may ask you for the Bosch part number from your HFM.
Schrick camshafts
M50 intake manifold
Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.
Shark Injector FAQ
(click to expand)
This item fits the following BMWs:
1996-1999 E36 BMW M3
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Stage 4+ Performance Software for E36 M3, MZ3 (M50 Manifold + Cams + Headers Kit)
Conforti Shark Injector performance software tuned for the an awesome OBD2 package: M50 manifold, Schrick camshafts, performance headers, "24lb" injectors, Porsche 809 3.5" HFM, and intake. This software makes full use of the benefits of the M50 manifold when used with cams and the HFM/intake. Without the software, you're not getting the full effect of these upgrades in the upper rev range. The stock software -- or a regular Shark Injector -- is tuned for low-end torque using the stock manifold and cams. It's like a marathon runner in a 40-yard dash -- he'll put in a good effort but won't be the quickest! Special attention was paid to the low-end andmid-range too so that torque was not lost with the M50 manifold.
With this software you will notice more top end power, a broader torque band, and a smoother running engine. The rev limit is raised to 7000 RPM with the top speed limiter removed. Works with 91 or higher octane fuel.
Required:
"24lb" injectors (actually around 26lb injectors when used at the S52's 3.5 bar of fuel pressure). You must confirm the injector flow-rate at 3.5 bar before using this software. If the injectors were not purchased from us, we may as for the Bosch part number on your injectors.
Porsche 809 3.5" HFM (0 280 217 809) (TMS/Porsche HFM works best) with intake. Note: this will not work with a Euro HFM, 540 HFM, or Dinan HFM. Our software is programmed and written specifically for the Porsche 809 HFM! If you did not purchase the HFM Kit from us, we may ask you for the Bosch part number from your HFM.
Schrick camshafts
Performance Headers (TMS Shorty Headers or similar)
M50 manifold
Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.
Shark Injector FAQ
(click to expand)
This item fits the following BMWs:
1996-1999 E36 BMW M3
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
| HP Gain | + 15 @ 6400 RPM | |
| Torque Gain | + 9 @ 4500 RPM | |
| New Rev Limit | 7000 RPM |
| HP Gain | + 15 @ 6200 RPM | |
| Torque Gain | + 12 @ 3500 RPM | |
| New Rev Limit | 7000 RPM | |
 M52tu engine dyno chart - E39 528i, E46 328i/ci, Z3 2.8 |
Shark Injector installation instructions
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Stage 3+ Performance Software for E36 328i/is/ic, E39 528i, and Z3 2.8 (M50 Manifold + M3 Cam Kit)
Conforti Shark Injector performance software tuned for the awesome OBD2 package: M50 manifold, M3 S52 camshafts, and intake. This software makes full use of the benefits of the M50 manifold when used with cams and intake. Without the software, you're not getting the full effect of these upgrades in the upper rev range. The stock software, or a regular Shark Injector, is tuned for low-end torque using the stock manifold and cams. It's like a marathon runner in a 40-yard dash: he'll put in a good effort but won't be the quickest! Special attention was paid to the low-end and mid-range too so that torque was not lost with the M50 manifold.
With this software you will notice more top end power, a broader torque band, and a smoother running engine. The rev limit is raised to 7000 RPM with the top speed limiter removed. Works with 91 or higher octane fuel.
Required:
E36 M3 MZ3 S52 stock camshafts
M50 intake manifold
Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.
Shark Injector FAQ
(click to expand)
This item fits the following BMWs:
1996-1999 E36 BMW 328i 328ic 328is
1997-1998 E39 BMW 528i
1997-1998 Z3 BMW 2.8
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
HP Gain up to + 12 @ 6000 RPM
Torque Gain up to + 10 @ 4000 RPM
New Rev Limit7000 RPM
dyno chart -
E36 M3, MZ3 roadster/coupe
Read what other's are saying!
(click to expand)
Z-Thrizzle: "The car just feels right after the injector. The car felt good having CAI, M50 [manifold,] and exahaust. Though after installing the shark injecter it was a lot smoother as though it was the last piece of the puzzle."
SunzOut: "Reduced cold Stumble, better mid/low range pickup."
M Roady: "Best performance mod I ever made on my S52. Worth more than all other mods combined. It certainly made a huge difference in the mid-range butt dyno tests."
S52coupe: "Like the others stated above, the car feels like it's much smoother, easier to drive, and you can tell a difference in the way the motor idles as soon as you turn it over. I was very happy with my purchase.."Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.Shark Injector FAQ
(click to expand)
Shark Injector FAQ
This item fits the following BMWs:
1998-2000 Z3 BMW Z3 M Roadster M Coupe
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
| HP Gain | + 15 @ 6400 RPM | |
| Torque Gain | + 9 @ 4500 RPM | |
| New Rev Limit | 7000 RPM |
| HP Gain | + 15 @ 6200 RPM | |
| Torque Gain | + 12 @ 3500 RPM | |
| New Rev Limit | 7000 RPM | |
M52tu engine dyno chart - E39 528i, E46 328i/ci, Z3 2.8 |
Shark Injector installation instructions
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Enhance the performance of your BMW Z3 with the BMW Z3 Shark Injector Performance Software. This performance software is designed to optimize engine performance, improve throttle response, and enhance overall driving dynamics. Engineered specifically for BMW Z3 models, the Shark Injector Performance Software offers easy installation and immediate results. Unlock the full potential of your BMW Z3 with this premium performance upgrade.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
The Shark Injector is the ultimate solution for effortlessly boosting power and torque in your BMW. This software, meticulously dyno-tuned by BMW tuning legend Jim Conforti, is engineered to maximize the potential of high-octane (91+) pump gas, enhancing mid-range torque and high-RPM horsepower. It delivers an elevated level of performance without compromising your BMW's integrity, making it the easiest way to unlock extra power.
The Shark Injector is meticulously designed to safely enhance performance, maintain driveability, and improve responsiveness. Installation is a breeze - simply connect a battery charger to ensure your car battery has backup power, plug in your Shark Injector, and initiate the process with the push of a button. The Shark Injector replaces parts of the stock software while storing the original data in the unit for future use, if needed. When the LED switches from red to green, you're ready to experience your BMW's improved performance.
The BMW M54 engine is already a finely-tuned machine, but there are still ample opportunities to enhance your driving experience. Jim Conforti has expertly tuned this Shark Injector to produce an additional 4 HP and 7 lb/ft of torque. Engine response is significantly improved, and the rev limit is raised to 7,000 RPM. Additionally, the speed limiter is removed, unlocking your BMW's full potential. Enjoy a vastly improved driving experience, especially during part-throttle and wide-open throttle acceleration.
It's important to note that Shark Injector software is ONLY compatible with NORTH AMERICAN SPEC BMWs and is not designed for EURO-SPEC BMWs.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Unlock the full potential of your MINI R52 R53 W11 1.6L engine with the Shark Injector, providing a hassle-free solution to boost power and torque. Dyno-tuned by BMW legend Jim Conforti, this software is tailored for high-octane (93+) pump gas, enhancing mid-range torque and high-RPM horsepower. Experience improved performance, driveability, and responsiveness without compromising safety.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
HP Gain Up To + 7 @ 5800 RPM
Torque Gain Up To + 7 @ 4700 RPM
New Rev Limit7000 RPM
M54 engine dyno chart
Z4 3.0i (M54 engine) Performance Software Peak Gains
HP Gain+ 4 @ 6100 RPM
Torque Gain+ 7 @ 3400 RPM
New Rev Limit7000 RPM
M54 engine dyno chart
Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.Shark Injector FAQ
(click to expand)
Shark Injector FAQ
This item fits the following BMWs:
2003-2005 E85 BMW Z4 2.5i Z4 3.0i
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Enhance your BMW's performance effortlessly with the Shark Injector, the ultimate solution for adding power and torque. Tuned by BMW legend Jim Conforti, this software optimizes high-octane pump gas for mid-range torque and high-RPM horsepower. Experience a better-performing BMW without compromising drivability with the Shark Injector's plug-and-play design.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Performance software is a must-have upgrade on your MZ3 and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!
The MZ3 performance software was developed on the dyno to create maximum power and torque using premium 91+ octane fuel and revising the torque limiters in the ECU. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. Choose between a stock or raised 8,100 RPM rev limit. The top speed limiter is removed. By fine tuning these maps we've been able to improve the S54 engine beyond what BMW did by making more power and torque and a smoother-running engine.
The Shark Injector plugs into the diagnostic port inside the Z3 cabin. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.
MZ3 Dyno
Power and Torque Gains
Stock: 253.2 rear wheel Horsepower, 223.1 rear wheel Torque
Sharked: 266.1 rear wheel Horsepower, 229.8 rear wheel Torque
Peak Gain 12.9 HP and 6.7 Torque @ the wheels.
A Max gain of 14.0 lb/ft rear wheel torque @ 4340 rpm
This item fits the following BMWs:
2001-2002 Z3 BMW Z3 M Roadster M Coupe (US model only)
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
E46 325i dyno chartHP Gain Up To + 7 @ 5800 RPM
Torque Gain Up To + 7 @ 4700 RPM
New Rev Limit7000 RPM
3.0 Performance Software Peak Gains
E46 330i dyno chartHP Gain Up To + 4 @ 6100 RPM
Torque Gain Up To + 7 @ 3400 RPM
New Rev Limit7000 RPM
Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.Shark Injector FAQ
(click to expand)
Shark Injector FAQ
This item fits the following BMWs:
2004-2005 E83 BMW X3 2.5i X3 3.0i
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Benefits of Shark Injector Performance Software:
 E46 M3 Dyno | Power and Torque Gains Stock: 278.2 whp / 235.3 wtrq Sharked: 284.2 whp / 236.9 wtrq Peak Gain 6.0 rear wheel HP and 1.6 rear wheel Torque (note: the max gain (biggest improvement) is 9 rear wheel HP between 7000 and 8000 rpm) |
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Elevate your BMW's power and torque effortlessly with the Shark Injector, the ultimate solution tuned by BMW legend Jim Conforti. Crafted for high-octane (91+) pump gas, this software excels in boosting mid-range torque and high-RPM horsepower. Key features include:
Awaken your BMW's S54 engine with the Shark Injector, carefully crafted to optimize every aspect of performance, providing more power, torque, and refined engine dynamics.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Performance software is a must-have upgrade on your BMW and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!
The M54 performance software was developed on the dyno to create maximum power and torque using premium 91+ octane fuel while maintaining BMW reliability and smoothness. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. A lot of tuning has been done at the low RPM ranges to improve response. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. We also raise the rev limit to 7,000 and remove the top speed limiter. By fine tuning these maps we've been able to improve the M54/M56 engine beyond what BMW did by making more power and torque and a smoother-running engine.
The Shark Injector plugs into the diagnostic port inside the X5 cabin. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.
This item fits the following BMWs:
1999-2006 E53 X5 3.0i