• 70MM, 80MM, OR 90MM OVERALL LENGTH
• OUR HIGHEST-GRADE PREMIUM WHEEL STUD
• DRY LUBE WITH BLACK M-PHOSPHATE COATING
• STUD FOR RACE/TRACK USE
• CORRECT SHOULDER SIZE FOR A WIDE RANGE OF HUBS/BRAKE ROTORS
• USE WITH 14x1.5 NUT
  
• For the very best in a race-grade wheel stud, stop looking! These are the wheel studs that our race teams insist on (after years of trying every stud design on the market). MSI Racing specializes in hardware for motorsport use (NASCAR and IMSA) and other advanced industries. We tried them on our Grand-Am/IMSA racecars and were very impressed by the performance and durability of their designs. Race wins and championships can come down to the seconds of a pitstop. We could run any wheel stud in the world and we use these. After testing them over the course of a few endurance seasons we decided to offer them to all of our customers as well.
  
  These studs are available in three overall lengths - 70.5mm, 80.5mm, and 90.5mm. All sizes are made with aircraft quality alloy steel and have roll formed threads for greater strength than cut threads. We use a dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish. Manganese is preferred over the more common zinc because it's better at reducing friction and wear to prevent thread galling. With the dry lube applied over the phosphate this is the best corrosion resistance we have seen in any wheel stud! Salt tests have shown this stud is superior to others in corrosion resistance. The dry lube helps the nut engage and glide over the threads for faster engagement without cross threading or binding. Other features of our MSI studs include a large bullet nose nut-starter and a properly sized shank to work with a wider range of BMW wheel, nut, and brake rotor combinations. We intentionally avoid the extra large shoulders you see on other studs because they can interfere with some brake rotor hats. The extra large shoulder can be too large to allow the rotor to pass through and drilling out the holes is required (not cool!) Our studs have the sufficient shank for the brake rotor without interfering.
  
  We configured these studs to have a 14x1.25 thread to go into the wheel hub. But the exposed stud has 14x1.5 threads. We did this because threading a nut is faster on 1.5 threads than a finer 1.25 thread pitch, which saved us time during pitstops. There are also more wheel nut options in 14x1.5. When you order our 14x1.25 studs make sure you also order the 14x1.5 nuts.
   

  FREE red threadlocker with purchase of a full set of wheel studs (16 or more)MSI Dry Lube Bullet Nose Wheel Stud Features:
  

• Dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish
• Innovative nut-starter and bullet shape radius that all but eliminates cross-threading
• Properly sized shank to work with a wide range of brake rotor, wheel, and nut combinations
• Heat-treated aircraft quality alloy steel
• Developed from over 20 years of top level NASCAR use
  
• These studs are installed using the traditional 'double-nut' method (one regular nut and one jam nut) with thread locking compound (Red Turbo-Lock or similar).
  
  Sold per stud.
  Wheel nuts sold separately.

Upgrade your BMW's wheel bolts with ECS Titanium Wheel Bolts for superior performance and durability. These bolts are 50% lighter than steel bolts, reducing rotational mass and enhancing vehicle agility. CNC'd from annealed titanium alloy, they meet class 10.9 fastener proof load requirements without signs of fatigue or failure. With precise specifications and a conical seat design, they ensure a perfect fit and optimal performance for your BMW.

• 50% lighter than steel bolts, reducing rotational mass
• CNC'd from annealed titanium alloy for durability
• Conical seat design for perfect fitment
• Resistant to rust and corrosion for long-term reliability

ECS Titanium Wheel Bolts

Upgrade your BMW's performance with ECS Titanium Wheel Bolts, designed for weight savings and durability. These premium bolts are perfect for performance enthusiasts seeking high-quality components that won't rust. Crafted from annealed titanium alloy, they offer a significant weight reduction of 50% compared to steel bolts of the same size, reducing rotational mass for improved performance.

Benefits:

• 50% lighter than steel bolts for reduced rotational mass
• CNC'd from annealed titanium alloy for exceptional strength and durability
• Tested to class 10.9 fastener proof load requirements without signs of fatigue or failure
• Rust-resistant construction ensures long-lasting performance
• Compatible with BMW and other vehicles with 14mm diameter, 1.25mm thread pitch, and 17mm head size

ECS Tuning's conical seat wheel bolts adhere to some of the most stringent testing and safety standards, and also feature a corrosion resistant black zinc coating for longevity and a change of style. The conical seat of the bolt was designed for compatibility with most aftermarket and OE MINI wheels, to ensure your wheels are safely secured. Make sure your wheels are fastened correctly with Black Conical Seat Wheel Bolts from ECS Tuning.

• Compliant with stringent testing and safety standards
• Corrosion-resistant black zinc coating for longevity and style
• Compatible with most aftermarket and OE MINI wheels
• Set of 20 bolts for replacing factory wheel bolts

Stock size for MINI, great for replacing all the wheel bolts with new for a clean look.

This is a set of 20 to replace your factory wheel bolts to black zinc coated. 14x1.25x27mm

Bolt specifications:

• Diameter - 14mm
• Thread Pitch - 1.25mm
• Length - 27mm

The Foxwell T20 TPMS sensor integrates both 315 MHz and 433 MHz frequencies, replacing more than 99% of OEM direct TPMS sensors on the market. The all-new, high-precision air valve prevents air leakage and provides a durable seal - an upgrade over the outgoing T10. Its proprietary sensor body features a long-lasting, lightweight 3V battery and supports unlimited wireless programming. Sensors can be easily activated and programmed using the Foxwell T2000 TPMS Service Tool (T#36811799).

Features:

Rubber valve stem Supports 315MHz and 433MHz frequencies High-precision air valve to avoid air leakage 0-30° adjustability Built-in battery with an extended service life (more than 5 years) Temperature reading range of -40°F to 257°F Pressure monitoring range of 0 to 130.53 psi 12G weight

OEM VDO wheel pressure sensor that will restore your TPMS system sensor for that wheel.

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Elevate your BMW's performance and reduce rotational mass with ECS Titanium Wheel Bolts, ideal for weight-conscious enthusiasts or those seeking high-quality, rust-resistant wheel bolts.

Key Benefits:

• 50% lighter than steel bolts, reducing rotational mass for improved performance.
• CNC'd from annealed titanium alloy, ensuring high quality and durability.
• Tested to class 10.9 fastener proof load requirements without signs of fatigue.
• 14mm diameter, 1.25mm thread pitch, 27mm length, conical seat, and 17mm head.
• Thoroughly clean hub threads before installation to prevent fatigue or cracking.
• Note: Adjust bolt length when using wheel spacers for proper fitment.

Upgrade to ECS Titanium Wheel Bolts for your BMW, optimizing performance while maintaining high quality and durability.

BMW & Supgra A90 ECS Wheel Spacers: Enhance Your Car's Performance

• Improves handling and stability
• Enhances the appearance of your BMW or Supgra A90
• Creates a wider stance for a more aggressive look
• Easy to install and remove

Upgrade your BMW or Supgra A90 with the BMW & Supgra A90 ECS Wheel Spacers. These wheel spacers are designed to improve handling and stability while enhancing the appearance of your vehicle. By creating a wider stance, they give your car a more aggressive look on the road. Plus, they are easy to install and remove, making them a convenient and practical upgrade for any BMW or Supgra A90 owner. Access Secret Premium Dashboard

For performance-driven enthusiasts seeking lightweight and high-quality wheel bolts, ECS Titanium Wheel Bolts are the ideal choice. These bolts are 50% lighter than steel equivalents, reducing rotational mass on the vehicle. Precision CNC'd from annealed titanium alloy, these bolts meet class 10.9 fastener proof load requirements without signs of fatigue or failure.

Benefits:

• 50% lighter than steel bolts, reducing rotational mass
• CNC'd from annealed titanium alloy for superior strength
• Full set of 20 for comprehensive wheel bolt replacement
• Diameter: 14mm, Thread Pitch: 1.25mm, Length: 27mm, Head: 17mm, Seat: Conical Seat
• Ensure thorough cleaning of hub threads before installation to prevent potential fatigue or cracking due to leftover zinc from previous bolts
• Note: When using wheel spacers, calculate the required bolt length by adding spacer size to OE bolt length for proper fitment (e.g., 26mm OE Wheel Bolt + 15mm Wheel Spacer = 41mm Length Bolt)

The Foxwell T20 TPMS sensor integrates both 315 MHz and 433 MHz frequencies, replacing more than 99% of OEM direct TPMS sensors on the market. The all-new, high-precision air valve prevents air leakage and provides a durable seal - an upgrade over the outgoing T10. Its proprietary sensor body features a long-lasting, lightweight 3V battery and supports unlimited wireless programming. Sensors can easily be activated and programmed with the Foxwell T2000 TPMS Service Tool (ES#4674668).

Features:

Rubber valve stem Supports 315MHz and 433MHz frequencies High-precision air valve to avoid air leakage 0-30° adjustability Built-in battery with an extended service life (more than 5 years) Temperature reading range of -40°F to 257°F Pressure monitoring range of 0 to 130.53 psi 12G weight

Revamp your tire aesthetics with the Tire Marker - White by Rennline. This high-quality tire marker allows you to add personalized touches to your tires, enhancing their appearance and visibility. Easy to use and durable, this tire marker is a must-have accessory for any car enthusiast.

• Personalize your tires with white marker
• Enhances tire appearance and visibility
• Easy to use
• Durable construction for long-lasting performance

Introducing the TPMS Starter Kit! Dive into TPMS servicing with ease using the included TPMS service tool and four sensors. Plus, enjoy peace of mind with our LIFETIME REPLACEMENT program, ensuring this kit remains by your side for the long haul!

T2000WF Wi-Fi TPMS SERVICE TOOL:

The Foxwell T2000WF is a professional TPMS diagnostic and maintenance tool that can activate and decode universal TPMS sensors, program TPMS, and diagnose any OEM tire pressure monitoring system. Featuring updated hardware for quicker operation and all-new software for increased capability, the T2000WF provides a complete, full-service solution for owners of TPMS-equipped vehicles.

Key Features:

Sensor Activation and Decoding: The T2000WF can activate and read data from universal TPMS sensors, ensuring they function correctly.

Sensor Programming: Allows for programming TPMS sensors to replace faulty ones or install new sensors when needed.

System Diagnostics: This tool diagnoses the vehicle's TPMS to identify and troubleshoot issues within the system.

WiFi Connectivity: The 'WF' in T2000WF indicates WiFi capabilities, enabling wireless updates and seamless data transfer.

User-Friendly Interface: Designed with an intuitive interface to facilitate ease of use for technicians and automotive enthusiasts.

This tool suits automotive professionals and enthusiasts seeking a reliable solution for TPMS-related services. If you're in need of a comprehensive, full-service diagnostic tool for your Tire Pressure Monitoring System equipped vehicle, look no further than the Foxwell T2000WF.

RUBBER T10 TPMS SENSORS:

The Foxwell TPMS sensor integrates 315MHz and 433MHz dual frequency and can replace more than 96% of the OEM sensors on the market. Sensors can easily be activated and programmed by any TPMS tool on the market.

Features:

Rubber valve stem. 315MHz and 433MHz dual frequency. High precision air valve to avoid air leakage. 0-30 degree adjustability. Build in battery with an extended service life (more than 5 years) Temperature reading range -40F - 257F Pressure monitoring range 0 to 130.53psi Weight - 12G

ECS Tuning lab tests its fasteners to ensure they meet all 10.9 specifications.

Wheel Bolt specs:

• Diameter - 14mm
• Thread Pitch - 1.25mm
• Length - 35mm

If installing wheel spacers, measure your current wheel bolt's length and add the width of your spacer to determine correct extended bolt length. 

The Foxwell T20 TPMS sensor integrates both 315 MHz and 433 MHz frequencies, replacing more than 99% of OEM direct TPMS sensors on the market. The all-new, high-precision air valve prevents air leakage and provides a durable seal - an upgrade over the outgoing T10. Its proprietary sensor body features a long-lasting, lightweight 3V battery and supports unlimited wireless programming. Sensors can easily be activated and programmed with the Foxwell T2000 TPMS Service Tool (ES#4674668).

Features:

Rubber valve stem Supports 315MHz and 433MHz frequencies High-precision air valve to avoid air leakage 0-30° adjustability Built-in battery with an extended service life (more than 5 years) Temperature reading range of -40°F to 257°F Pressure monitoring range of 0 to 130.53 psi 12G weight