BMW Brakes & Brake Parts for BMW I01 i3 IB3

Factory rubber brake hoses expand under pressure, requiring increased fluid volume and more pedal travel for the desired stopping force. What is often thought to be brake fade or fluid boiling, can actually be the brake lines expanding under pressure. This expansion is even more prominent in aged and weathered rubber hoses. Turner Stainless Steel brake lines are engineered and assembled with braided stainless steel mesh and offer superior expansion resistance and reinforcement. The resistance to expansion creates a firmer pedal, and a more direct pedal feel. The signature blue polymer coating provides additional protection from the elements and abrasion, which is common with the constant movement of suspension and braking systems.

When you buy brake lines, you want them to last for years to come. Conventional SS lines will corrode the first time they are exposed to water. Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake line also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

All Turner brake lines are engineered to comply with DOT (U.S. Department of Transportation) FMVSS 106 standards. All lines are manufactured on dedicated, DOT-compliant brake equipment and each is tested to 3000 psi before being

shipped.

Turner Motorsport stocks a huge inventory of premium brake components, including pads, rotors, shoes, drums, hoses, hard lines, fluids, hardware, hi-temp lubricants, all the way up to complete brake rebuild kits. Everything you need to perform a professional quality brake service, you can find at Turner Motorsport!

Technical features:

Fully compliant with DOT Standards (MVSS-1006)

Lines burst-tested to 3000psi
(maximum tested pressure from a BMW braking system is 1200psi)

Zinc-Nickel coating for maximum corrosion resistance

Low profile connectors for clean and recessed look

BRAKE BLEEDER:

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

• Holds a full 3-Liters (3.17 qts) of brake fluid
• Easy to read 0-30 lbs pressure gauge built into the tank top
• Pressure relief valve for safe release of pressure
• 40" hose with detachable swivel fitting

Note:

• Do not exceed 20 PSI
• LIFETIME REPLACEMENT

Includes:

• 3 Liter (3.17 qts) storage tank
• Pressure cap with 0-30 lb gauge and pressure relief valve
• 40" hose
• Dual preventative fittings on the hose, featuring a chrome quick coupler on one end to snap onto the master cylinder cap and a detachable swivel fitting on the other end

Note:

• Recommend working at 10 PSI
• Dimensions for cap seal: 12x21x4 mm
• LIFETIME REPLACEMENT

CATCH BOTTLE:

Keep your fluid's off the floor and into our catch bottle.  The bottle has fluid level markings from 0.2L to 0.7 liter. This feature allows you to measure how much fluid you have sent thru the system.  Our bleeder bottle features an expandable/collapsible top portion for easier storage. Gasket in cap prevents leakage. Tubing is extra long at 24" from cap to nipple. Flexible hose can be pushed down into bottle for storage when done. Bottle now features a handy hanger bracket to hang bottle from bottom of car.

CALIPER HOOK SET:

Tired of messing with bent coat hangers or bungee cords to hang your calipers up and out of the way when performing brake maintenance? These hooks make working on your brakes easier by letting you hang your calipers with ease, no more fighting with the bungee cords or zip ties to hold the caliper just right or having to make your own "custom" hooks with wire.

• Holds brake calipers out of the way while working on brakes
• Also use to hang other automotive parts and tools while working on your vehicle.
• Stronger than zip ties or wire.
• Save the brake hose by not hanging caliper by hose.
• Made of  thick steel for strength and durability. length is 8"

BILLET ALUMINUM CAP:

This aluminum cap with 90 degree swivel will work with our T#363245 Euro bleeder or our T#366970 3-Liter Multi-functional Fluid Pump Kit.

Features an all aluminum 45mm cap with quick coupler nipple.

BLEEDER WRENCH:

Finally, a bleeder wrench with just the right angle to open the bleeder screw without having to spend all that time removing each wheel from your car.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Schwaben Locking Hose Pinch-Off Pliers have adequate clamping force to effectively seal large or pressurized cooling system hoses. These pliers are ideal for clamping shut most hoses, ensuring reliability in your automotive tasks. With swivel jaws, they provide even clamping force, making them a versatile tool for various applications.

• Adequate clamping force for large or pressurized hoses
• Ideal for clamping shut most hoses
• Swivel jaws ensure even clamping force
• Versatile tool for automotive maintenance

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. For more information, visit http://www.p65warnings.ca.gov.

TORX SCREWDRIVER SET:

Handy Torx® screwdriver set includes six common bit sizes, perfect for removing door and dashboard panels, interior trim, and smaller underhood components.

Hardened tips have center hole for use with both standard or tamper-proof Torx fasteners. Large grips add comfort and leverage. Handle through-holes make them easy to hang from pegboard hooks.

Entire kit packaged in a convenient molded case.

Sizes include: T10, T15, T20, T25, T27, and T30.

STANDARD SCREWDRIVER SET:

Elevate your craftsmanship with the Schwaben 6 Piece Screwdriver Set!

Crafted with precision and durability in mind, these professional-grade screwdrivers stand the test of time, ensuring reliable performance for countless projects.  Constructed from robust nickel chrome moly, these screwdrivers are built to endure rigorous use, making them reliable companions for various tasks. That's why it's backed by our LIFETIME REPLACEMENT program - because we want this set to stick with you as long as you need it to!

Features:

• Color-Coded Brilliance: Effortlessly switch between flat head and Philips heads, thanks to the intuitive color-coded design. Enhance efficiency and eliminate guesswork.
• Comfortable Control: Experience fatigue-free operation with the ergonomic handles, offering both comfort and precision for intricate tasks.
• Organized Housing: Housed in a molded tray, these commonly used screwdriver sizes are easily portable and organized, reducing the hassle of rummaging through toolboxes.
• Essential Sizes: Curated for versatility, the set includes sizes catering to delicate tasks and robust projects, covering all your needs.

Includes:

• 5.5x100mm flat head screwdriver

• 6.5x150mm flat head screwdriver

• 8x175mm flat head screwdriver

• #1x75mm Phillips screwdriver

• #2x100mm Phillips screwdriver

• #3x150mm Phillips screwdriver

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.