Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
The latest in the Yellow line takes all of the RSL29 characteristics and adds a bit more aggressive behavior. Friction levels go up for more initial bite and better fade resistance. Modulation and release stays close to RSL29 levels. Pad and rotor wear is a little more than on the previous Yellows but still within reasonable levels and the RSL1 is still considered an extended endurance pad. Its development stemming from GT classes at Le Mans and Nürburgring.
Since Pagid pads tend to "out-gas" we recommend using these pads with a new gas-slotted or cross-drilled rotor for the best performance. Pagid brake pads are not compatible with previously used rotors, especially if used with a carbon or Kevlar based race pad.
This item fits the following BMWs:
1999-2005 E46 BMW 330i 330ci 330xi M3
1999-2003 E39 BMW M5
1995-2001 E38 BMW 740i 740il
1991-1997 E31 BMW 840i 840ci 850i 850ci 850csi
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
2000-2006 E53 BMW X5 3.0i X5 4.4i X5 4.6is X5 4.8is
2006-2008 Z4 BMW Z4 M Roadster M Coupe
2000-2003 E52 BMW Z8 Roadster
This product was last offered at the strikethrough price on
05-02-2026
This product was last offered at the strikethrough price on
05-02-2026
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
06-15-2026
These pads were originally equipped on the Euro E46 M3 models and the US M3 ZCP, as well as Euro-spec M models from the 1990s. Owners of the E46 M3 will know that the stock pads are already quite 'aggressive' from the factory with a lot of initial bite. The initial bite was built into the pad to stop criticism of BMW's lack of 'performance' brakes. Instead of building the M models with exotic - and expensive - multi-piston calipers, BMW engineers turned up the braking power in their pads. These pads go a step further as the pads that originally came on the Euro E46 M3 and all E46 M3 ZCPs. For the street, these are excellent brake pads with excellent feel and performance. The only downside is the dust that comes from an organic pad. The problem with many aftermarket and OEM pads is that they do not match the same level of initial bite as the stock OE BMW pads. This can make the brakes feel 'weak' and 'numb' even though the pads are working properly. If you want to maintain your braking feel, these are the best to use.
Although these pads were originally designed for M cars, they fit other models as well, making them a great first-step upgrade for better braking.
Price is for one set of pads - enough to replace the pads on both front calipers.
If you are looking for front brake rotors, 2282445446
These front pads fit the following BMWs:
1988-1994 E32 BMW 735i 735il 740i 740il 750il (more aggressive fitment)
1989-1995 E34 BMW 525i 530i 535i 540i M5 (more aggressive fitment)
1994-1998 E36 BMW M3 (more aggressive fitment than US-spec)
1998-2002 Z3 BMW M Roadster M Coupe (more aggressive fitment)
1999-2005 E46 BMW 330i 330ci 330xi M3 (more aggressive fitment for 330)
2003-2008 E85 E86 BMW Z4 3.0si Z4 M Roadster M Coupe (more aggressive fitment for 3.0si)
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Elevate your lifting experience with the Schwaben Long Low Profile - High Lift Floor Jack. Certified for excellence and designed with a keen understanding of European car enthusiasts' needs, this jack is a testament to precision, durability, and performance. Don't compromise on quality—choose the Schwaben advantage for all your lifting endeavors.
Designed with precision, crafted for performance, and backed by our lifetime replacement program, the Schwaben Long Low Profile - High Lift Floor Jack is a must-have tool for every European car aficionado. This jack is engineered to cater to the unique needs of low ground clearance vehicles, ensuring that your prized possessions are lifted with care and precision.
Key Features:
Specifications:
Also included are the Schwaben Aluminum 3-Ton Jack Stands. These ultra-light Schwaben jack stands only weigh 4.7 lbs each. Fit and finish on these stands show how much pride in workmanship goes into our stands. These stands feature all-aluminum construction with heavy-duty flanged bases to safely stabilize loads. Features 6 locking positions for a secure load in multiple heights. The load pin is extra heavy duty at .584 in. diameter and features a posi lock ball to ensure the pin stays in place.
For replacement parts, please call us and ask for:
WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.
This product was last offered at the strikethrough price on
04-26-2026
This product was last offered at the strikethrough price on
04-26-2026
These rear brake rotors are from CSL/ZCP E46 M3. They are vented rotors, veined directionally for optimal cooling. OEM BMW 2-piece construction makes these rotors lighter than stock and with improved expansion and contraction to prevent rotor warp at high temps.
These rotors are cross-drilled allowing for faster heat dissipation and reduced brake fade on the track.
Turner Motorsport carries a massive catalog of brake parts for your BMW, with the vast majority of it stocked in our warehouse!
If you are looking for front rotors, 2282445446
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
These front brake rotor set are from CSL/ZCP E46 M3. They are vented 345x28 rotors, veined directionally for optimal cooling. OEM BMW 2-piece construction makes these rotors lighter than stock and with improved expansion and contraction to prevent rotor warp at high temps.
These rotors are cross-drilled allowing for faster heat dissipation and reduced brake fade on the track.
Turner Motorsport carries a massive catalog of brake parts for your BMW, with the vast majority of it stocked in our warehouse!
These rotors require using CSL front brake caliper carriers 34112282619 if vehicle is not already equipped with ZCP or CSL brakes. Turner Motorsport recommends ECS Tuning's CSL brake caliper carriers if you are looking to save some money (the Genuine BMW CSL carriers are very pricy!)
If you are looking for CSL brake pads, 34112282995
If you are looking for rear CSL rotors, 282303304
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
06-22-2026
This product was last offered at the strikethrough price on
06-22-2026
This product was last offered at the strikethrough price on
05-07-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Having a low profile floor jack can be a great asset for your garage, perfect for those with a lowered car as well as those that aren't. Most car owners with a lowered vehicle have been in the position of their floor jack not making the clearance needed, the low profile jack is the answer.
Details:
The ultra light Schwaben jack stands only weigh 4.7 lbs each. Fit and finish on these stands just shows how much pride in workmanship goes into our stands.These stands are all aluminum construction with heavy-duty flanged bases to safely stabilize loads. Features 6 locking positions for a secure load in multiple heights. The load pin is extra heavy duty at .584 in. diameter and features a posi lock ball to insure pin stays in place.
Min. Height is 10.6".
Max Height is 15.4".
Large 7" diameter base.
Outer support tube is 2-1/8" in diameter.
