Find Parts That Fit Your Vehicle

BMW Turner Motorsport Wheel Spacers

Get the wide look without buying new wheels!
BMW leaves a lot of extra space between the tire and fender. This is amplified when lowering the ride height. By pushing the wheel out further you improve the looks and the handling at the same time! The wheels sit flush with the fender for a smoother appearance. And widening the stance will give you more stability and better handling.

Spacer sizing depends on your wheel, tire, and suspension setup. Most stock BMWs will take a 10-15mm in the front or rear. We encourage our customers to measure for wheel gap before ordering. This ensures you get the final stance and clearance you're after. Measuring is easy and only takes a few seconds - click here for tips on measuring.

Turner Motorsport is the first American BMW tuner to put engineering principles into wheel spacer design. We have set the bar for fitment, lightness, practicality, and longevity. After almost 20 years in the business we wanted a spacer with the features and tricks we always wanted, so we started with a clean sheet of paper. The market took notice and now many Turner innovations can be found on our competitor's products.

Turner Wheel Spacers are still the best!
+ Quick Release Pockets  Spacers need to be removed from time to time and it's not uncommon for them to be stuck to the hub. Most spacer companies would tell you to hammer them off with a chisel. Our spacers were the first to feature pockets on the back of the spacer so you can simply pop them off.
+ High Grade Materials  Our spacers use a very strong and lightweight aluminum compound. It also has a strong resistance to corrosion (one of the main reasons they stick to the hub). Our aluminum grade has the best combination of light weight, strength, and corrosion resistance.
+ Military-Spec Hardcoat  We take the extra steps (and cost) and hardcoat our spacers. Hardcoats are stronger than standard anodized metal. This ensures the spacer can withstand abuse and won't dull or change color over time. Turner spacers are available in anthracite grey or black.
+ Precision Machining = No Vibration  All Turner spacers are CNC machined in the USA to very tight tolerances. We guarantee a precise and correct fitment for your application so you don't have to worry about vibration. We also machine the spacer to optimize weight without affecting strength.
+ Easy Identification  We laser engrave each spacer with its part number and size for quick and easy identification. We then hardcoat over the engraving to maintain a stealthy appearance.
+ Multiple Bolt/Stud Options  We offer our wheel bolts in either factory black or bright silver. And if you track your car, we also have wheel stud and nut options.

To read more about wheel spacers, including measuring and fitment tips, check out our complete spacer page.

Turner Motorsport Front Hub Extenders (Pair)
Turner Motorsport Front Hub Extenders (Pair)
Hub Extenders are the solution that no one else has! BMW ...
Turner Motorsport - Corporate Logo
T#:210
Part#: TWH9905001
In Stock
$61.95
Free Shipping

Hub Extenders are the solution that no one else has! BMW wheels must fit on a hubcentric lip to be securely (and safely) mounted to the hub. But with a 3, 5, 8, or some 10mm spacers on a lip measuring no more than 11mm that presented a huge problem - there would be no lip left over for the wheel to rest on! As one of the world's leading BMW tuners and race teams, we came up with a way to extend the lip and get back the lost surface area for the wheel to safely mount on. Our Hub Extenders are the first of their kind.

Hub Extenders fit where the stock dust cap is usually fitted on the front wheel hub. Pop out the dust cap and tap the Hub Extender into its place. It becomes an extension of the original lip. These will only work on the front hubs of the cars listed below because the rear hub is tapered inside (narrows down). These will not work with Xi AWD models because the front axle shaft protrudes through the hub. With Hub Extenders in place you can use nearly any flat wheel spacer - 3mm, 5mm, 7.5mm, 10mm, or possibly more without worrying that the wheel will not be securely seated. This is perfect for wheels that have chamfers on the back of the wheel that don't match up to existing spacers (Kosei K1 spacers for example).

Turner Hub Extender Features --

+ hub extension makes flat spacers a true hubcentric fitment
+ precise tolerance fitment thanks to CAD process and CNC mill machine
+ aerospace grade aluminum light weight but very strong with a high resistance to corrosion
+ additional military-spec hardcoat for further corrosion resistance
+ stealthy black color with laser engrave Turner logo
+ Turner Motorsport track and street tested!
+ Made in the USA

Wheel Limitations. Special consideration needs to be taken since wheel design and manufacture differ from brand to brand. The key dimension is the dept of the center bore. Some wheels won't work with larger spacers and a Hub Extender because of the additional protrusion into the center bore. Please measure your wheel to make sure it can accommodate an extra 2.5-5mm of hub extending into the center bore. Click here for a diagram.

Hub Limitations. BMW has multiple hub designs but not all are compatible with our Hub Extenders. The inside lip of the hub must be flat and smooth for at least 13mm (the depth our Extender fits into the hub). Some BMW hubs have a bowl shape or have tapered inside walls which will prevent the Hub Extender from seating all the way. Remove the hub dust cap to check before opening your Turner Hub Extenders.

This item fits the following BMWs:
2014+ F22 F23 BMW 228i M235i
1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci M3
10/2013+ F30 BMW 320i 328i 335i - Sedan
10/2013+ F31 BMW 328i - Wagon
10/2013+ F34 BMW 328i - Gran Turismo
10/2013+ F32 BMW 428i 435i - Coupe
10/2013+ F33 BMW 428i 435i - Convertible
10/2013+ F36 BMW 428i 435i - Gran Coupe
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
1982-1989 E24 BMW 633csi 635csi M6
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe


Turner BMW 12.5mm Wheel Spacers (Pair) - Most BMWs (see applications)
Turner BMW 12.5mm Wheel Spacers (Pair) - Most BMWs (see applications...
12.5MM (.49 inch) Wheel Spacer for BMW E24, E28, E30 M3, ...
Turner Motorsport - Corporate Logo
T#:340488
Part#: TWH9905013
In Stock
Starting at $91.95
Free Shipping
Starting at $91.95
Free Shipping

12.5MM (.49 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4

Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems --

  • Correct wheel offset issues
  • Achieve a flush fitment instead of the "tucked under" look
  • Clearance the wheel from contact with other components (suspension, brakes, etc).
  • Improve handling and stability by increasing track width

A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required.

These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is light weight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market!

Turner Wheel Spacer Features --
+ hub-centric design, 1-piece spacer
+ precise tolerance fitment thanks to CAD process and CNC mill machine
+ aerospace grade aluminum light weight but very strong with a high resistance to corrosion
+ additional military-spec hardcoat for further corrosion resistance
+ innovative Quick Release pockets for easy removal (better than a chamfered back edge)
+ laser engraved size and part number for easy identification
+ stealthy anthracite or black color
+ extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available)
+ Turner Motorsport track and street tested!
+ Made in the USA

Extended Wheel Bolts
Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are a very high quality and high grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing.

Spacer Specs:
(click to expand)
Spacer Specs:
bolt pattern:5 x 120
center bore:72.6mm
hubcentric?yes
wheel pad size:normal

Year & Model Applications
(click to expand)
2008-2012 E82 BMW 128i 135 1M
1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
1976-1981 E12 BMW 528i 530i
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi M6
2004-2010 E63 BMW 645ci 650i M6
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Turner BMW 15mm Wheel Spacers (Pair) - Most BMWs (see applications)
Turner BMW 15mm Wheel Spacers (Pair) - Most BMWs (see applications) ...
15MM (.59 inch) Wheel Spacer for BMW E24, E28, E30 M3, E3...
Turner Motorsport - Corporate Logo
T#:340490
Part#: TWH9905015
In Stock
Starting at $91.95
Free Shipping
Starting at $91.95
Free Shipping

15MM (.59 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4

Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems --

  • Correct wheel offset issues
  • Achieve a flush fitment instead of the "tucked under" look
  • Clearance the wheel from contact with other components (suspension, brakes, etc).
  • Improve handling and stability by increasing track width

A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required.

These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is light weight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market!

Turner Wheel Spacer Features --
+ hub-centric design, 1-piece spacer
+ precise tolerance fitment thanks to CAD process and CNC mill machine
+ aerospace grade aluminum light weight but very strong with a high resistance to corrosion
+ additional military-spec hardcoat for further corrosion resistance
+ innovative Quick Release pockets for easy removal (better than a chamfered back edge)
+ laser engraved size and part number for easy identification
+ stealthy anthracite or black color
+ extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available)
+ Turner Motorsport track and street tested!
+ Made in the USA

Extended Wheel Bolts
Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are a very high quality and high grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing.

Spacer Specs:
(click to expand)
Spacer Specs:
bolt pattern:5 x 120
center bore:72.6mm
hubcentric?yes
wheel pad size:normal

Year & Model Applications
(click to expand)
2008-2012 E82 BMW 128i 135 1M
1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
1976-1981 E12 BMW 528i 530i
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi M6
2004-2010 E63 BMW 645ci 650i M6
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Turner BMW 10mm Wheel Spacers (Pair) - Most BMWs (see applications)
Turner BMW 10mm Wheel Spacers (Pair) - Most BMWs (see applications) ...
10MM (.39 inch) Wheel Spacer for BMW E24, E28, E30 M3, E3...
Turner Motorsport - Corporate Logo
T#:340487
Part#: TWH9905010
In Stock
Starting at $89.95
Free Shipping
Starting at $89.95
Free Shipping

10MM (.39 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4

Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems --

  • Correct wheel offset issues
  • Achieve a flush fitment instead of the "tucked under" look
  • Clearance the wheel from contact with other components (suspension, brakes, etc).
  • Improve handling and stability by increasing track width

A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required.

These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is light weight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market!

Turner Wheel Spacer Features --
+ hub-centric design, 1-piece spacer with hubcentric lip
+ precise tolerance fitment thanks to CAD process and CNC mill machine
+ aerospace grade aluminum light weight but very strong with a high resistance to corrosion
+ additional military-spec hardcoat for further corrosion resistance
+ innovative Quick Release pockets for easy removal (better than a chamfered back edge)
+ laser engraved size and part number for easy identification
+ stealthy anthracite or black color
+ extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available)
+ Turner Motorsport track and street tested!
+ Made in the USA

10mm Fitment Note: You must be very careful when fitting 10mm spacers to any BMW. Since the depth of the hubcentric lip will vary, you risk bottoming out of the spacer before it sits flush with the hub. This will leave a gap between the spacer and the hub, seriously compromising the strength of the spacer. The lip on the car may need to be shaved down so the 10mm spacer will fit flush on the rotor hat.

Extended Wheel Bolts
Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are a very high quality and high grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing.

Spacer Specs:
(click to expand)
Spacer Specs:
bolt pattern:5 x 120
center bore:72.6mm
hubcentric?yes
wheel pad size:normal

Year & Model Applications
(click to expand)
2008-2012 E82 BMW 128i 135 1M
1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
1976-1981 E12 BMW 528i 530i
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi M6
2004-2010 E63 BMW 645ci 650i M6
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Turner BMW 12.5mm Big Pad Wheel Spacers (Pair) - F-Chassis
Turner BMW 12.5mm Big Pad Wheel Spacers (Pair) - F-Chassis ...
12.5MM (.49 inch) Big Pad Wheel Spacers for BMW E70 X5M, ...
Turner Motorsport - Corporate Logo
T#:339036
Part#: TMS215374
In Stock
Starting at $99.95
Free Shipping
Starting at $99.95
Free Shipping
Made in the USA 12.5MM (.49 inch) Big Pad Wheel Spacers for BMW E70 X5M, E71 X6/X6M, F02, F10, F13, F22, F25, F3X, F8X M3/M4

These are our Big Pad wheel spacers designed for the latest generation of factory BMW wheels. The "wheel pad" is the back of the wheel that mounts to the hub on the car. Since the early 2000s the factory BMW wheel pad diameter has grown - 150mm, 152mm, 154mm, and now 156mm. Most of the wheel spacers on the market are 152mm. The difference from using the smaller spacer on a large pad will leave an unsightly step down between the back of the wheel and the brake rotor hat (see image). To fix this visual defect we use a larger diameter spacer - the Big Pad. This will have less of a step, or no step at all, when used with the larger pad size. Note that nearly all aftermarket wheel manufacturers use the smaller pad size (mainly to reduce unsprung weight). For more information on wheel pad sizes and their effects on fitment and strength, click to our spacers FAQ page .

Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems. A spacer fits between the wheel and the hub assembly. The wheel will be pushed further outboard by the thickness of the spacer. Spacers allow you to correct wheel offset issues when the wheel is too 'tucked in' to the bodywork, clear the wheel from contact with the suspension or inner bodywork, clear larger brakes, improve handling and stability by increasing track width, or simply to get the right look and stance. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required.

These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is light weight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market!

Turner Wheel Spacer Features
+ hub-centric design with hub-centric lip
+ precise tolerance fitment thanks to CAD process and CNC mill machine
+ large pad surface area - 156mm vs standard 150mm
+ aerospace grade aluminum - light weight but very strong with a high resistance to corrosion
+ additional military-spec hardcoat for further corrosion resistance
+ innovative Quick Release pockets for easy removal (better than a chamfered back edge)
+ laser engraved size and part number for easy identification
+ stealthy anthracite or black color
+ Turner Motorsport track and street tested!
+ Made in the USA

Wheel Spacer Tech & FAQ
Important Note: It is vital that you measure the depth of your hub lip. The depth of the lip must not exceed the thickness of the spacer. This is critical on newer chassis cars that have deeper hubs than older models. For examples and tips on measuring, check out our How To Measure for Spacers page.
Wheel Spacer Encyclopedia - everything you wanted to know

Spacer Specs
bolt pattern:5 x 120
center bore:72.6mm
hubcentric?yes
wheel pad size:large

Extended Wheel Bolts
Required for all BMW wheel spacers is a set of longer wheel bolts or wheel studs. Spacers cannot be used with stock bolts. Our extended lug bolts are a very high quality and high grade steel lug bolt (grade 10.9). A black zinc coating will maintain a factory BMW appearance and provide long-lasting corrosion protection. Zinc finishes are designed to withstand 700 hours of salt spray testing.


This item fits the following BMWs:
Front or Rear
2014+ F22 BMW 228i 228iX M235i M235iX
2012+ F30 BMW 320i 320iX 328i 328iX 335i 335iX - Sedan
2012+ F31 BMW 328i 328iX - Wagon
2014+ F34 BMW 328i 328iX 335iX - Gran Turismo
2014+ F32 BMW 428i 428iX 435i 435iX - Coupe
2014+ F33 BMW 428i 428iX 435i 435iX - Convertible
2014+ F36 BMW 428i 428iX 435i 435iX - Gran Coupe
2015+ F80 BMW M3
2015+ F82 BMW M4
2011+ F10 BMw 528i 535i 535i xDrive 550i 550i xDrive
2010+ F07 BMw 535i GT, 535i xDrive GT, 550i GT, 550i xDrive GT
2012+ F13 BMW 640i 650i
2009+ F01 BMW 740i 740li 750i 750li 750i xDrive 750li xDrive 760li
2011+ F25 BMW X3 xDrive28i X3 xDrive35i


Rear Only
2007-2013 E70 BMW X5M
2007-2014 E71 BMW X6 xDrive35i X6 xDrive50i X6M
Turner BMW 5mm Wheel Spacers (Pair) - Most BMWs (see applications)
Turner BMW 5mm Wheel Spacers (Pair) - Most BMWs (see applications) ...
5MM (.20 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31...
Turner Motorsport - Corporate Logo
T#:340485
Part#: TWH9905005
In Stock
Starting at $81.95
Free Shipping
Starting at $81.95
Free Shipping

5MM (.20 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4

Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems --

  • Correct wheel offset issues
  • Achieve a flush fitment instead of the "tucked under" look
  • Clearance the wheel from contact with other components (suspension, brakes, etc).
  • Improve handling and stability by increasing track width

A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required.

These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is light weight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market!

Turner Wheel Spacer Features --
+ hub-centric design, 1-piece spacer
+ precise tolerance fitment thanks to CAD process and CNC mill machine
+ aerospace grade aluminum light weight but very strong with a high resistance to corrosion
+ additional military-spec hardcoat for further corrosion resistance
+ innovative Quick Release pockets for easy removal (better than a chamfered back edge)
+ laser engraved size and part number for easy identification
+ stealthy anthracite or black color
+ extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available)
+ Turner Motorsport track and street tested!
+ Made in the USA

Extended Wheel Bolts
Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are a very high quality and high grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing.

Spacer Specs:
(click to expand)
Spacer Specs:
bolt pattern:5 x 120
center bore:72.6mm
hubcentric?yes
wheel pad size:normal

Fitment Notes:
(click to expand)
5mm spacer note: a 5mm spacer sits on the existing hub lip but leaves less than 5mm of lip for the wheel to rest on. Therefore, wheels that have a bevel around the center bore will not engage the hub lip and may reseult in a vibration.

Year & Model Applications
(click to expand)
2008-2012 E82 BMW 128i 135 1M
1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
1976-1981 E12 BMW 528i 530i
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi M6
2004-2010 E63 BMW 645ci 650i M6
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Turner BMW 10mm Wheel Spacers With Integrated Hub Extender - F8X M3/M4, F87 M2
Turner Motorsport - Corporate Logo
T#:339027
Part#: TWHF8005J10
In Stock
Starting at $112.95
Free Shipping
Starting at $112.95
Free Shipping
As on our Project F80 M3
Made in the USA 10MM (.39 inch) 1-piece Integrated Wheel Spacer and Hub Extender for BMW F80 M3, F82 M4

Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems. Spacers allow you to correct wheel offset issues, clearance for big brakes or suspension or bodywork, to improve handling and stability by increasing track width, or simply to get the right look and stance. Our spacers are engineered precisely for BMWs, with multiple features that other brands don't have, and have been rigorously tested by our race team and on our street project cars. We have the most advanced BMW wheel spacers on the market because we are BMW specialists and we design, engineer, and manufacture them in-house.

Our in-house R&D dept. solved a shortcoming that is inherent with all small flat spacers - not enough lip is left on the hub for the wheel to rest on. BMW designs their wheels to fit on the lip protruding from the hub. The bolts alone are not designed to support the wheel. Placing a flat spacer on the lip reduces the amount of lip available and transfers more stress to the wheel bolts. Since the bolts alone were not designed this way, the bolts and the hub will fail eventually. So our R&D dept. came up with an ingenious combined Spacer and Hub Extender that incorporates a new hub with a flat spacer (a true hubcentric 10mm spacer). The Turner Interlocking Technology Spacers have a bridged support structure that fits in the voids of the unique M3/M4 hub. This gives an interlocking fitment for the spacer with a new full lip for the wheel to rest on. All other M3/M4 10mm spacers are now old news and it would be crazy to run a flat spacer instead of these!

Our spacers are manufactured in-house from an aerospace-grade aluminum, then finished in a military-spec hardcoat that is stronger and more durable than normal anodizing. We finish our spacers in a stealthy grey or black color so they blend in with the wheel and hub. We also use the correct diameter spacer so there is no unsightly step between the wheel and hub. The part number and Turner logo are laser engraved for easy identification. Pockets on the backside of the spacer are a Turner Motorsport innovation and aid in removing a stubborn spacer from the hub. Longer wheel bolts or studs are required with these spacers. Several styles of wheel bolts or studs are offered for a safe and complete install.

Turner Wheel Spacer Features
+ hub-centric design, 1-piece Spacer with Hub Extender
+ precise tolerance fitment thanks to CAD process and CNC mill machine
+ aerospace grade aluminum A- light weight but very strong with a high resistance to corrosion
+ additional military-spec hardcoat for further corrosion resistance
+ innovative Quick Release pockets for easy removal (better than a chamfered back edge)
+ laser engraved size and part number for easy identification
+ stealthy anthracite or black color
+ optional extended bolt sets in factory-matching black finish (wheel stud kits also available)
+ Turner Motorsport track and street tested!
+ Made in the USA

Wheel Spacer Tech & FAQ
How To Measure for Spacers
Wheel Spacer Encyclopedia - everything you wanted to know

Spacer Specs
bolt pattern:5 x 120
center bore:72.6mm
hubcentric?yes with Integrated Hub Extender
wheel pad size:large

Extended Wheel Bolts
Required for all BMW wheel spacers is a set of longer wheel bolts or wheel studs. Spacers cannot be used with stock bolts. Our extended lug bolts are a very high quality and high grade steel lug bolt (grade 10.9). A black zinc coating will maintain a factory BMW appearance and provide long-lasting corrosion protection. Zinc finishes are designed to withstand 700 hours of salt spray testing.


This item fits the following BMWs:
Front or Rear
2015+ F80 BMW M3 Sedan
2015+ F82 BMW M4 Coupe
2015+ F83 BMW M4 Convertible

Turner BMW 7.5mm Wheel Spacers With Integrated Hub Extender - F8X M3/M4, F87 M2
Turner Motorsport - Corporate Logo
T#:339026
Part#: TWHF8005J08
In Stock
Starting at $112.95
Free Shipping
Starting at $112.95
Free Shipping
As on our Project F80 M3
Made in the USA 7.5MM (.30 inch) 1-piece Integrated Wheel Spacer and Hub Extender for BMW F80 M3, F82 M4

Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems. Spacers allow you to correct wheel offset issues, clearance for big brakes or suspension or bodywork, to improve handling and stability by increasing track width, or simply to get the right look and stance. Our spacers are engineered precisely for BMWs, with multiple features that other brands don't have, and have been rigorously tested by our race team and on our street project cars. We have the most advanced BMW wheel spacers on the market because we are BMW specialists and we design, engineer, and manufacture them in-house.

Our in-house R&D dept. solved a shortcoming that is inherent with all small flat spacers - not enough lip is left on the hub for the wheel to rest on. BMW designs their wheels to fit on the lip protruding from the hub. The bolts alone are not designed to support the wheel. Placing a flat spacer on the lip reduces the amount of lip available and transfers more stress to the wheel bolts. Since the bolts alone were not designed this way, the bolts and the hub will fail eventually. So our R&D dept. came up with an ingenious combined Spacer and Hub Extender that incorporates a new hub with a flat spacer (a true hubcentric 7.5-8mm spacer). The Turner Interlocking Technology Spacers have a bridged support structure that fits in the voids of the unique M3/M4 hub. This gives an interlocking fitment for the spacer with a new full lip for the wheel to rest on. All other M3/M4 7-8mm spacers are now old news and it would be crazy to run a flat spacer instead of these!

Our spacers are manufactured in-house from an aerospace-grade aluminum, then finished in a military-spec hardcoat that is stronger and more durable than normal anodizing. We finish our spacers in a stealthy grey or black color so they blend in with the wheel and hub. We also use the correct diameter spacer so there is no unsightly step between the wheel and hub. The part number and Turner logo are laser engraved for easy identification. Pockets on the backside of the spacer are a Turner Motorsport innovation and aid in removing a stubborn spacer from the hub. Longer wheel bolts or studs are required with these spacers. Several styles of wheel bolts or studs are offered for a safe and complete install.

Turner Wheel Spacer Features
+ hub-centric design, 1-piece Spacer with Hub Extender
+ precise tolerance fitment thanks to CAD process and CNC mill machine
+ aerospace grade aluminum A- light weight but very strong with a high resistance to corrosion
+ additional military-spec hardcoat for further corrosion resistance
+ innovative Quick Release pockets for easy removal (better than a chamfered back edge)
+ laser engraved size and part number for easy identification
+ stealthy anthracite or black color
+ optional extended bolt sets in factory-matching black finish (wheel stud kits also available)
+ Turner Motorsport track and street tested!
+ Made in the USA

Wheel Spacer Tech & FAQ
How To Measure for Spacers
Wheel Spacer Encyclopedia - everything you wanted to know

Spacer Specs
bolt pattern:5 x 120
center bore:72.6mm
hubcentric?yes with Integrated Hub Extender
wheel pad size:large

Extended Wheel Bolts
Required for all BMW wheel spacers is a set of longer wheel bolts or wheel studs. Spacers cannot be used with stock bolts. Our extended lug bolts are a very high quality and high grade steel lug bolt (grade 10.9). A black zinc coating will maintain a factory BMW appearance and provide long-lasting corrosion protection. Zinc finishes are designed to withstand 700 hours of salt spray testing.


This item fits the following BMWs:
Front or Rear
2015+ F80 BMW M3 Sedan
2015+ F82 BMW M4 Coupe
2015+ F83 BMW M4 Convertible