Find Parts That Fit Your Vehicle

BMW Wheel Bolts, Wheel Studs and Nuts

Any time you use a wheel spacer you MUST have a longer wheel bolt or wheel stud to properly fasten the wheel to the hub. We offer extended wheel spacer bolts in silver and black finish in a variety of lengths to fit many spacer sizes. We're up to date on the different thread sizing as well - 12x1.5, 14x1.25, and 14x1.5 so we can supply wheel bolts for just about any BMW or MINI.

Add the spacer thickness to your stock bolt length and that is your ideal extended bolt length. We generally sell bolts by spacer thickness but there may be exceptions. It's always best to measure from the wheel bolt you're currently using. When we list the total length of a bolt it's from the base of the mounting seat to the tip. To be considered safe, a 12x1.5 wheel bolt needs 10mm (6.5 turns) of thread engaged; a 14x1.25 or 14x1.5 bolt needs 12mm (9.0 and 7.5 turns) of engaged thread.

19mm 12x1.5 Turner Silver Zinc-Coated Compact Wheel Nut
19mm 12x1.5 Turner Silver Zinc-Coated Compact Wheel Nut
19mm compact lug nut to fit 12x1.5 thread wheel studs (co...
Turner Motorsport - Corporate Logo
T#:178007
Part#: TWH9952345
In Stock
$0.29
Limited Qty Sale
Free Shipping on orders $99 and up
19mm compact lug nut to fit 12x1.5 thread wheel studs (common for most BMWs made before 2012). This wheel nut has a reduced outer flange for a more compact and minimal fitment. On many wheels, the hole for the lugbolt or lugnut is a very narrow diameter. Not even the stock lugbolt will fit through and these wheels often come with their own lugbolts. Then when adding studs to the car the options for a small diameter lug nut are very limited. We ran into this problem over and over and finally found a solution! These compact lugs have all of the material of a 19mm nut but without the flange of a standard wheel nut. For this reason we do not recommend using these on a wheel that normally takes a standard bolt seat (the seat is very important to the strength and integrity of the design). But for wheels that are designed to use a small seat, these are the solution! Bright and durable zinc finish makes them easy to spot during fast pitstop tire changes.

Priced per nut.
Thin-wall 19mm socket may be required depending on your wheel design.
Conical Seat Wheel Bolt - 14x1.25x40mm
Conical Seat Wheel Bolt - 14x1.25x40mm
ECS Tuning lab tests its fasteners to ensure they meet al...
ECS - Corporate Logo
T#:341197
Part#: C17F40-ZNNITT
In Stock
$3.95
Free Shipping

ECS Tuning lab tests its fasteners to ensure they meet all 10.9 specifications.

Wheel Bolt specs:

  • Diameter - 14mm
  • Thread Pitch - 1.25mm
  • Length - 40mm

If installing wheel spacers, measure your current wheel bolt's length and add the width of your spacer to determine correct extended bolt length.

17mm 12x1.5 Turner Black Zinc-Coated Wheel Nut
17mm 12x1.5 Turner Black Zinc-Coated Wheel Nut
17mm black lug nut to fit 12x1.5 thread wheel studs (comm...
ECS - Corporate Logo
T#:350695
Part#: D95-ZNNITT
In Stock
$3.95
Free Shipping on orders $99 and up
17mm black lug nut to fit 12x1.5 thread wheel studs (common for most BMWs made before 2012). This is a super tough wheel stud nut in a standard 17mm size. The black finish is durable, corrosion-resistant, and stealthy so it blends in with dark-colored wheels. BMW designed their wheels to use a black bolt so more of the silver design 'pops' or is more eye-catching. These black wheel nuts preserve that effect. 17mm is the standard BMW bolt head size so you won't have to buy extra sockets. The seat is a standard diameter but may not fit all brands of wheels. If you have a small diameter bolt bore on your wheels, try our compact 19mm wheel nuts.

Priced per nut.

Conical Seat Wheel Bolt - 14x1.25x43mm
Conical Seat Wheel Bolt - 14x1.25x43mm
ECS Tuning lab tests its fasteners to ensure they meet al...
ECS - Corporate Logo
T#:341198
Part#: C17F43-ZNNITT
In Stock
$3.95
Free Shipping

ECS Tuning lab tests its fasteners to ensure they meet all 10.9 specifications.

Wheel Bolt specs:

  • Diameter - 14mm
  • Thread Pitch - 1.25mm
  • Length - 43mm

If installing wheel spacers, measure your current wheel bolt's length and add the width of your spacer to determine correct extended bolt length.


19mm 12x1.5 Turner Yellow Zinc-Coated Race Wheel Nut
19mm 12x1.5 Turner Yellow Zinc-Coated Race Wheel Nut
Turner Motorsport's five years of endurance compe...
Turner Motorsport - Corporate Logo
T#:3137
Part#: TWH9952R19
In Stock
Sale - Save 5% $5.95
$5.65
Free Shipping on orders $99 and up
Sale - Save 5% $5.95
$5.65
Free Shipping on orders $99 and up
Turner Motorsport's five years of endurance competition has taught us many things. One was that not all lug-nuts are made the same. While the standard nuts that we sell are great for daily drivers, HPDE events, and club racing, a beefier and more durable nut was needed for the 3-hour, 6-hour, and 24-hour professional endurance races. During the 24 Hours of Daytona, our crew guys made over 80 tire changes in NASCAR-style pitstops. That kind of abuse from air guns and fast work required the "next level" of lug-nut. These nuts are a high-grade steel with a zinc coating and they incorporate several innovative features.

The wheel-side of the nut has recessed threads so that the nut has to be square to engage the threads. Without the recess, it's far too easy to start the threads with the nut being crooked.

The 19mm head of the nut is slightly rounded to help the socket find its position.

The zinc plating that we use is reasonably durable without being excessive. With too much coating, the chipped and worn coating fragments can end up in the threads, leading to all sorts of trouble. Anyone who has used nuts repeatedly knows that the coating is not going to last forever. The constant abuse from air guns will chip it all away. So why add weight and the potential for disaster with excess coating? We did away with most of the danger from that with a lighter coating that still resists the tough environment of the track.

Features:
  • Developed for our Grand-Am / Continental race team
  • High grade steel to withstand the extreme abuse of air guns and race conditions
  • Bright yellow zinc plating to help tire changer zoom in on their target quickly and accurately
  • Minimal plating won't result in excess coating wearing off and "gumming up" the threads
  • 19mm hex to prevent rounding off
  • Rounded top for fast socket engagement
  • Recessed threads to aid in fast nut-to-stud alignment without cross threading
  • We recommend using with Turner Motorsport bullet nose dry-lube wheel studs
    Price is per nut.
  • Conical Seat Wheel Bolt - 14x1.25x50mm
    Conical Seat Wheel Bolt - 14x1.25x50mm
    ECS Tuning lab tests its fasteners to ensure they meet al...
    ECS - Corporate Logo
    T#:341199
    Part#: C17F50-ZNNITT
    In Stock
    $4.95
    Free Shipping

    ECS Tuning lab tests its fasteners to ensure they meet all 10.9 specifications.

    Wheel Bolt specs:

    • Diameter - 14mm
    • Thread Pitch - 1.25mm
    • Length - 50mm

    If installing wheel spacers, measure your current wheel bolt's length and add the width of your spacer to determine correct extended bolt length.


    Conical Seat Wheel Bolt - 14x1.25x35mm
    Conical Seat Wheel Bolt - 14x1.25x35mm
    ECS Tuning lab tests its fasteners to ensure they meet al...
    ECS - Corporate Logo
    T#:341196
    Part#: C17F35-ZNNITT
    In Stock
    $3.95
    Free Shipping on orders $99 and up

    ECS Tuning lab tests its fasteners to ensure they meet all 10.9 specifications.

    Wheel Bolt specs:

    • Diameter - 14mm
    • Thread Pitch - 1.25mm
    • Length - 35mm

    If installing wheel spacers, measure your current wheel bolt's length and add the width of your spacer to determine correct extended bolt length.


    Conical Seat Wheel Bolt - 14x1.25x27mm
    Conical Seat Wheel Bolt - 14x1.25x27mm
    ECS Tuning lab tests its fasteners to ensure they meet al...
    ECS - Corporate Logo
    T#:373595
    Part#: C17F27-ZNNITT
    In Stock
    $3.95
    Free Shipping on orders $99 and up

    ECS Tuning lab tests its fasteners to ensure they meet all 10.9 specifications.

    Wheel Bolt specs:

    • Diameter - 14mm
    • Thread Pitch - 1.25mm
    • Length - 27mm

    If installing wheel spacers, measure your current wheel bolt's length and add the width of your spacer to determine correct extended bolt length.


    Conical Seat Wheel Bolt - 14x1.25x33mm
    Conical Seat Wheel Bolt - 14x1.25x33mm
    ECS Tuning lab tests its fasteners to ensure they meet al...
    ECS - Corporate Logo
    T#:341195
    Part#: C17F33-ZNNITT
    In Stock
    $3.95
    Free Shipping

    ECS Tuning lab tests its fasteners to ensure they meet all 10.9 specifications.

    Wheel Bolt specs:

    • Diameter - 14mm
    • Thread Pitch - 1.25mm
    • Length - 33mm

    If installing wheel spacers, measure your current wheel bolt's length and add the width of your spacer to determine correct extended bolt length.

    17mm 14x1.5 Turner Silver Zinc-Coated Wheel Nut
    17mm 14x1.5 Turner Silver Zinc-Coated Wheel Nut
    17mm lug nut to fit 14x1.5 thread wheel studs. This is a ...
    Turner Motorsport - Corporate Logo
    T#:189774
    Part#: TWH997214A
    In Stock
    $2.95
    $0.50
    Limited Qty Sale
    Free Shipping on orders $99 and up
    $2.95
    $0.50
    Limited Qty Sale
    Free Shipping on orders $99 and up
    17mm lug nut to fit 14x1.5 thread wheel studs. This is a super tough wheel stud nut in a standard 17mm size. The zinc finish is durable and bright so your eye catches it quick (important during fast pitstop tire changes). 17mm is the standard BMW bolt head size so you won't have to buy extra sockets. The seat is a standard diameter but may not fit all brands of wheels.

    Priced per nut.
    Conical Seat Wheel Bolt - 14x1.25x38mm
    Conical Seat Wheel Bolt - 14x1.25x38mm
    ECS Tuning lab tests its fasteners to ensure they meet al...
    ECS - Corporate Logo
    T#:373599
    Part#: C17F50/38
    In Stock
    $3.95
    Free Shipping on orders $99 and up

    ECS Tuning lab tests its fasteners to ensure they meet all 10.9 specifications.

    Wheel Bolt specs:

    • Diameter - 14mm
    • Thread Pitch - 1.25mm
    • Length - 38mm

    If installing wheel spacers, measure your current wheel bolt's length and add the width of your spacer to determine correct extended bolt length.



    19mm 14x1.5 Turner Yellow Zinc-Coated Race Wheel Nut
    19mm 14x1.5 Turner Yellow Zinc-Coated Race Wheel Nut
    Turner Motorsport's years of endurance competitio...
    Turner Motorsport - Corporate Logo
    T#:189775
    Part#: TWH9972YR4
    In Stock
    $4.95
    $2.98
    Limited Qty Sale
    Free Shipping on orders $99 and up
    $4.95
    $2.98
    Limited Qty Sale
    Free Shipping on orders $99 and up
    Turner Motorsport's years of endurance competition has taught us many things. One was that not all lug-nuts are made the same. While the standard nuts that we sell are great for daily drivers, HPDE events, and club racing, a beefier and more durable nut was needed for the 3-hour, 6-hour, and 24-hour professional endurance races. During the 24 Hours of Daytona, our crew guys made over 80 tire changes in NASCAR-style pitstops. That kind of abuse from air guns and fast work required the "next level" of lug-nut. These nuts are a high-grade steel with a zinc coating and they incorporate several innovative features.

    The wheel-side of the nut has recessed threads so that the nut has to be square to engage the threads. Without the recess, it's far too easy to start the threads with the nut being crooked.

    The 19mm head of the nut is slightly rounded to help the socket find its position.

    The zinc plating that we use is reasonably durable without being excessive. With too much coating, the chipped and worn coating fragments can end up in the threads, leading to all sorts of trouble. Anyone who has used nuts repeatedly knows that the coating is not going to last forever. The constant abuse from air guns will chip it all away. So why add weight and the potential for disaster with excess coating? We did away with most of the danger from that with a lighter coating that still resists the tough environment of the track.

    Features:
  • 14x1.5 thread pitch
  • Developed for our Grand-Am / Continental race team
  • High grade steel to withstand the extreme abuse of air guns and race conditions
  • Bright yellow zinc plating to help tire changer zoom in on their target quickly and accurately
  • Minimal plating won't result in excess coating wearing off and "gumming up" the threads
  • 19mm hex to prevent rounding off
  • Rounded top for fast socket engagement
  • Recessed threads to aid in fast nut-to-stud alignment without cross threading
  • We recommend using with Turner Motorsport bullet nose dry-lube wheel studs
    Price is per nut.
  • Turner Motorsport 12x1.5 Bullet Nose Wheel Stud - Most BMWs 1984-2011 (E30, E36, E46, E9X)
    Turner Motorsport - Corporate Logo
    T#:340499
    Part#: TWH9950
    In Stock
    Starting at $175.95
    Free Shipping
    Starting at $175.95
    Free Shipping
    As used on the Lime Rock M3 Made in the USA
    • 75MM OR 90MM OVERALL LENGTH
    • EASY INSTALL WITH ALLEN SOCKET
    • BLACK M-PHOSPHATE COATING
    • CORRECT SHOULDER SIZE FOR HUBS/BRAKE ROTORS
    • STUD FOR MIXED STREET/TRACK USE

    Wheel studs are among the safest and most beneficial upgrades you can make on a track car. Not only are wheel studs safer than wheel bolts but they make changing wheels/tires much easier. One of the frustrating things about installing your wheels on the hub is that it's difficult to line up the wheel on the bolt holes. As wheels get larger but also heavier it's even more trouble. Add in a wheel spacer and the task is twice as hard. BMW does produce a wheel alignment pin for this purpose but if you're changing wheels often a stud conversion is the better way to go.

    Our original bullet nose studs are available in 75mm and 90mm overall lengths. The 75mm works great for cars that do not use a spacer (or a spacer smaller than 10mm). We recommend the 90mm length for cars that have a spacer larger than 10mm. These studs come with a black magnesium phosphate coating for excellent corrosion resistance. These studs are perfect for dual-purpose street/track cars. The studs are stronger and safer than wheel bolts and have a barrier against corrosion which makes them suitable for street use. For a dedicated race or track car, where wheel changes or pit stops are more frequent, check out our racing dry lube studs.

    Our studs are also designed and manufactured with the properly sized shank to work with a wider range of BMW wheel, nut, and brake rotor combinations. We intentionally avoid the extra large shoulders you see on other studs because they can interfere with some brake rotor hats. The extra large shoulder can be too large to allow the rotor to pass through and drilling out the holes is required (not cool!) Our studs have the sufficient shank for the brake rotor without interfering.

    Not all wheel studs are created equal. We don't take a manufacturer's generic wheel stud from their catalog and call it our own. Turner Wheel Studs are manufactured to meet our own specifications. Beware of cheaper studs on the market! We have seen other studs similar to our own designs that are not a true BMW fitment. There are differences that we have ironed out over our years of selling wheel studs for the BMW market. Our stud prices may be slightly higher than the rock bottom prices on the web but we promise that it's a higher quality.

    FREE red threadlocker with purchase of a full set of wheel studs (16 or more)
    Turner Bullet Nose Wheel Stud Features:
  • Black phosphorous corrosion resistant coating
  • Innovative nut-starter and bullet shape radius that all but eliminates cross-threading
  • Long shank for good brake rotor alignment
  • Heat-treated aircraft quality alloy steel
    Installation Instructions
    Click here for installation instructions and more information.



    Sold per stud.
  • Wheel Bolt Set - 12x1.50 - Black - For Most 1975-2012 BMW, MINI
    Wheel Bolt Set - 12x1.50 - Black - For Most 1975-2012 BMW, MINI ...
    Whether you are looking to replace your old stock wheel l...
    Turner Motorsport - Corporate Logo
    T#:338594
    Part#: TMS1237
    In Stock
    Starting at $27.50
    Free Shipping on orders $99 and up

    Whether you are looking to replace your old stock wheel lug bolts, or need longer bolts to accommodate wheel spacers or for other special considerations, our black wheel bolts are probably what you need. They are high grade (10.9) and feature a durable black finish. These are 12 x 1.5mm bolts with a 17mm head -- as used on most BMWs. Replaces BMW part numbers 36136781150 and 36131095390.

    The standard length wheel bolts are for stock BMWs, and the longer length bolts are listed below (select your length with the drop down box) with the size / thickness wheel spacers they are suitable for. Longer wheel bolts are only 20 cents more than standard, and are available in lengths to work with spacers up to 20mm thick. Please select your desired length below (default is the standard/stock BMW length bolt).

    Price is for a set of 10 bolts.

    These black wheel bolts fit the following BMWs:
    2008-2012 E82 BMW 128i 135i 1M Coupe
    1977-1983 E21 BMW 320i 320/5 323i
    1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2007-2013 E93 BMW 328i 335i M3 - Convertible
    1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
    1989-1995 E34 BMW 525i 530i 535i 540i M5
    1997-2003 E39 BMW 525i 528i 530i 540i M5
    2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
    1982-1989 E24 BMW 633csi 635csi L6 M6
    2004-2011 E63 E64 BMW 645ci 650i M6
    1977-1987 E23 BMW 728i 733i 735i 745i L7
    1988-1994 E32 BMW 735i 735il 740i 740il 750il
    1995-2001 E38 BMW 740i 740il 750il
    1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    2009-2015 E89 BMW Z4 sDrive28i sDrive30i sDrive35i sDrive35is
    2000-2003 E52 BMW Z8 Roadster
    2002-6/2006 R50 MINI MINI Cooper
    2005-6/2006 R52 MINI MINI Cooper Convertible, MINI Cooper S Convertible.
    2002-6/2006 R53 MINI MINI Cooper S


    Genuine BMW Wheels Set Wheel Locks
    Genuine BMW Wheels Set Wheel Locks
    Protect your valuable wheels and tires from theft with th...
    Genuine BMW - Corporate Logo
    T#:13639
    Part#: 36136786419
    In Stock
    19% off MSRP $49.00
    $39.64
    Free Shipping on orders $99 and up