Find Parts That Fit Your Vehicle

BMW Sway Bar Links & Sway Bar Parts

Worn or failed sway bar links can lead to clunks, thunks in your suspension -- or WORSE, they can cause an upset in your BMW's handling. We carry both stock and upgraded swaybar links for BMW's, so whether you are replacing a broken stock sway bar link or looking for upgraded swaybar end links for track or racing purposes, this section is where you'll find our sway bar links and parts.

E36/E46 Rear Adjustable Length Sway Bar End Links (Pair)
Turner Motorsport - Corporate Logo
T#:53
Part#: TSU9913RS2
In Stock
Sale - Save 5% $119.95
$113.95
Free Shipping
Sale - Save 5% $119.95
$113.95
Free Shipping

These adjustable rear links are only required when using sway bar / swaybars with a suspension with a very low ride height, where it may be necessary to adjust the length of the end links for proper sway bar clearance from the drive axles or other suspension components. These suspensions are usually found only on race cars but this may also apply to street cars with sport springs/sport coil overs that are lowered a lot. On most street cars lowered 1.5" or less, the stock links will be fine.

These end links feature a Heim joint, which allows enough lateral movement when disconnected to adjust the length of the link without removing the entire link from the car. This is particularly helpful when eliminating or adjusting preload while tuning the suspension. Similar links without this joint, can't be adjusted without totally removing the link from the car.

Built-in grease fittings allow for occasional lube, and a packet of grease is included. These links are sold as a set, and include two end links and hardware for H&R and TMS sway bars (other brands may not need the hardware).

At their shortest setting they are 2.875" hole to hole and on their longest setting they are 3.5" hole to hole.

*Note: these links will not work with factory or non-adjustable Eibach sway bars.

Turner E46 M3 30mm Front Sway Bar Bushing (Each)
Turner Motorsport - Corporate Logo
T#:390025
Part#: 53110036
In Stock
Sale - Save 5% $29.95
$28.45
Sale - Save 5% $29.95
$28.45

Replacement front sway bar bushing for the Turner E46 M3 30mm front sway bar.

Fits only with the Turner 30mm front sway bar - not a stock sway bar.

E28, E30, E34, E36, E39, E46, E9X, MZ3, Z4 Turner Motorsport Adjustable Front Sway Bar End Links (Pair)
Turner Motorsport - Corporate Logo
T#:339009
Part#: TMS339009
In Stock
Sale - Save 5% $159.95
Starting at $151.95
Free Shipping
Sale - Save 5% $159.95
Starting at $151.95
Free Shipping

You get the best of both worlds with this pair of Turner Motorsport adjustable sway bar links. We searched far and wide to find the hidden gem of swaybar links. You get the same quiet operation and long life as the stock links plus the strength and adjustability of rod-end style sway bar links.

With the wide range of suspensions and sway bars available today adjustable sway bar links can help you with many problems. Along with the ability to remove preload you can change the length to maximize sway bar geometry. Example: if the sway bar hoop comes too close to the steering rack, oil cooler, or under tray in its suspension travel you can adjust it by simply lengthening or shorting the adjustment rod. In some cases you may need a longer or shorter adjustment rod to achieve optimal geometry. We also offer these same links in other custom lengths (click here) that may not be specific to BMW chassis.

Features:

  • Adjustable to neutralize preload on sway bar (balanced handling)
  • The ability to set sway bar geometry and clearance
  • Low friction ball joints
  • High articulation
  • Direct replacement for OEM sway bar links
  • Watertight boot seal
  • Ball joint is made by a world leader in ball joint technology, THK. THK's OEM Customers: BMW, Porsche, Ford, GM, Nissan, Honda, and Toyota

Turner Swaybar Link Specs:
TSU9912AF1: 220.00mm - 235.00mm / 8.66" - 9.25"
TSU4612AF3: 250.00mm - 265.00mm / 9.84" - 10.43"
TSU5012AF8: 280.00mm - 295.00mm / 11.02" - 11.61"
TSU9912A95: 290.00mm - 305.00mm / 11.42" - 12.00"

These adjustable sway bar end links can be used on a variety of BMWs. Please select your car below. Please note these end links do not fit non-M E36, except 325i/is produced before 6/1992.


OEM Lemforder Rear Sway Bar Link - E30 E36 E24 E28
Lemforder - Corporate Logo
T#:3264
Part#: 33551126932
In Stock
$10.45
Free Shipping on orders $99 and up

Sway bar end links connect the swaybar to the rest of the suspension, preventing body roll and keeping everything in line in tight turns. This exposes these links to a high amount of stress and pressure, often leading to split bushings and sloppy body control and knocking noises. OEM LemfAPrder sway bar links are the perfect option to restore body control and eliminate knocking noises.

OEM LemfAPrder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. LemfAPrder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This stock replacement sway bar / swaybar link secures the rear sway bar ends to the chassis. Over time the rubber breaks down and can cause poor handling. Alternate part number 33551124375.



This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1983-1989 E24 BMW 633csi 635csi M6
1982-1987 E23 BMW 733i 735i


Turner Motorsport Custom Length Adjustable Front Sway Bar End Links (Pair)
Turner Motorsport - Corporate Logo
T#:338618
Part#: TMS2104
In Stock
Sale - Save 5% $159.95
Starting at $151.95
Free Shipping
Sale - Save 5% $159.95
Starting at $151.95
Free Shipping

Our renowned TMS adjustable front sway bar / swaybar links for BMWs are now available in custom lengths, making them easy to order for any aftermarket or custom suspension setups. Simply measure for your ideal link length, and order the links with the best length range (below). Each sway bar link has a 10mm diameter mounting pin/stud, which is the typical factory/stock size for a universal fitment. These are sold by the pair, and each set includes two matching sway bar end links.

These end links offer the quiet operation and long life of "stock" BMW end links, but with the strength and adjustability of rod-end style sway bar links. These sway bar links can be used on a wide variety of BMWs and aftermarket BMW suspensions. When measuring, please consider that the length ranges of our Custom Adjustable end links are measured from the center to center on the end link mounting stud / pin, as shown in our diagram.

Note for E9X M3: the unique mounting on the M3 strut requires a set of our adapter seats (#TSU9912AF9). You can add them with your links from the menu below.

TMS Part#Center to Center (mm)Center to Center (inch)

TSU9912A35155.00mm - 170.00mm6.10" - 6.69"

TSU9912A40170.00mm - 185.00mm6.69" - 7.28"

TSU9912A45180.00mm - 195.00mm7.08" - 7.67"

TSU9912A50190.00mm - 205.00mm7.48" - 8.07"

TSU9912A55207.00mm - 222.00mm8.15" - 8.74"

TSU9912AF1220.00mm - 235.00mm8.66" - 9.25"

TSU9912A70240.00mm - 255.00mm9.45" - 10.04"

TSU4612AF3250.00mm - 265.00mm9.84" - 10.43"

TSU9912A80261.00mm - 276.00mm10.28" - 10.87"

TSU5012AF8280.00mm - 295.00mm11.02" - 11.61"

TSU9912A95290.00mm - 305.00mm11.42" - 12.00"

TSU9912110320.00mm - 335.00mm12.59" - 13.19"

TSU9912115330.00mm - 345.00mm12.99" - 13.58"

TSU9912130362.00mm - 377.00mm14.25" - 14.84"

TSU9912135370.00mm - 385.00mm14.57" - 15.16"

TSU9912140381.00mm - 396.00mm15.00" - 15.60"

TSU9912145389.00mm - 404.00mm15.31" - 15.91"


Please select your length below.

Genuine BMW Steel Rear Sway Bar Bracket Upgrade Pair - E39
Genuine BMW - Corporate Logo
T#:348199
Part#: 33506779734KT
In Stock
$9.90
Free Shipping on orders $99 and up
The aluminum sway bar brackets on the rear of E39 models have a tendancy to snap. It's not a widespread problem but we have seen it a few times, on stock and upgraded sway bars. The stock bracket is soft aluminum and as it flexes it can snap. These upgraded bushing brackets are from the E38 7-series (and others) and are much stronger - and cheaper! - than E39 brackets. They are a direct replacement with the original hardware, however, upgraded urethane bushings may need some material trimmed away to fit better. Price is for the pair of steel brackets.

CATuned 180mm Front Adjustable Sway Bar Links - Pair - E28, E30, E34, E36, E39, E46, E9X, MZ3, Z4
CATuned - Corporate Logo
T#:397184
Part#: FRT180LNK
In Stock
$115.00
$115.00

CATuned includes these adjustable front sway bar links in many of their coilover kits. Utlilizing low-friction ball joints with superior articulation, they're supremely durable and designed to help you clock your sway bars correctly depending on ride height.

OEM Lemforder Front Sway Bar Link - E30 318/325, E36 318/325/328, Z3
Lemforder - Corporate Logo
T#:2271
Part#: 31351091764
In Stock
$16.37
Free Shipping on orders $99 and up

Fits non-M models of the BMW E30, E36, and Z3. Sold per link.

Sway bar end links connect the swaybar to the rest of the suspension, preventing body roll and keeping everything in line in tight turns. This exposes these links to a high amount of stress and pressure, often leading to split bushings and sloppy body control and knocking noises. OEM LemfAPrder sway bar links are the perfect option to restore body control and eliminate knocking noises.

OEM LemfAPrder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. LemfAPrder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Full Application List:
E30 1984-1991 318i, 318is, 318ic, 325, 325e, 325es, 325i, 325is, 325ic. Not for the AWD 325ix
E36 6/1992-1999 318i, 318is, 318ic, 323is, 323ic, 325i, 325is, 325ic, 328i, 328is, 328ic
Z3 1996-2002 1.9, 2.3, 2.5, 2.8, 3.0


Meyle Heavy Duty Front Sway Bar End Link - E46 RWD, Z4
Meyle HD - Corporate Logo
T#:304219
Part#: 31351095694
In Stock
$19.99
Free Shipping on orders $99 and up

Sway bar end links connect the swaybar to the rest of the suspension, preventing body roll and keeping everything in line in tight turns. This exposes these links to a high amount of stress and pressure, often leading to split bushings and sloppy body control and knocking noises. Meyle HD sway bar links are the perfect option to restore body control and eliminate knocking noises.

Meyle is a German brand in business since 1958 and all of their products are TUV approved and meet or exceed ISO standards. Heavy Duty components are designed to provide significantly long lifespans than other aftermarket and stock OE components. Each part includes a 4 year warranty.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Features:

  • 4 Year Warranty

  • All metal ball joints are more reliable and longer lasting than stock

  • Bushings are solid rubber rather than fluid filled, providing longevity and handling feel improvements

Fits the following BMWs:
2000-2006 E46 BMW RWD
2002-2008 Z4 BMW all sub-models


OEM Lemforder Rear Sway Bar End Link - E46 M3, Z4
Lemforder - Corporate Logo
T#:361895
Part#: 33552283743
In Stock
$11.20
Free Shipping on orders $99 and up

Sway bar end links connect the swaybar to the rest of the suspension, preventing body roll and keeping everything in line in tight turns. This exposes these links to a high amount of stress and pressure, often leading to split bushings and sloppy body control and knocking noises. OEM LemfAPrder sway bar links are the perfect option to restore body control and eliminate knocking noises.

OEM LemfAPrder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. LemfAPrder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

OEM Lemforder Front Sway Bar Link - E36 M3, MZ3
Lemforder - Corporate Logo
T#:12521
Part#: 31352227203
In Stock
$27.21
Free Shipping on orders $99 and up

Ball-joint failure in the front sway bar / swaybar link on the E36 M3, M Roadster and M Coupe is something that can't be avoided. If you are looking for a direct replacement Lemforder is an OEM supplier to BMW. How do you know if the link has gone bad? From inside the car you will hear a clunking noise when going over bumps. The clunk is a sure sign a ball joint (control arm, tie rod, swaybar link) has failed. Diagnosis with a set of channel-lock pliers will reveal a large amount of play in the ball joint itself.

OEM LemfAPrder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. LemfAPrder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


This item fits the following BMWs:
1995-1998 E36 BMW M3
1996-2002 Z3 BMW M Roadster M Coupe

H&R Swaybar Bushing - 25mm - E46 M3
H&R - Corporate Logo
T#:193651
Part#: 71414-RBUSH
In Stock
$26.73
$26.73
H&R sway bar bushings feature a special urethane/Teflon composite that prevents squeaks and eliminates the need for lubrication. No mess, no maintenance, a perfect fit.

Sold individually

This item fits the following BMWs:
2001-2006 E46 BMW M3


E9X M3 Turner Motorsport Custom Length Adjustable Front Sway Bar End Links (Pair)
Turner Motorsport - Corporate Logo
T#:340290
Part#: E9XM3-SBLINKS
In Stock
Sale - Save 6% $189.95
Starting at $178.95
Free Shipping
Sale - Save 6% $189.95
Starting at $178.95
Free Shipping
These sway bar links are offered in many different lengths which is perfect for an E90 E92 M3 running coil overs and needs to have the pre-load eliminated from the front sway bar. The M3 front strut is different than other E9X models. It has a concave depression on the tab for the sway bar link which makes every other aftermarket or adjustable link impossible to use. Our set of links includes a convex seat adapter piece that most other custom sway bar links do not have.

Custom lengths are sometimes needed because of ride height differences or if the sway bar link mounting point has been moved. Simply measure for your ideal link length, and order the links with the best length range (below). Each sway bar link has a 10mm diameter mounting pin/stud, which is the typical factory/stock size for a universal fitment. These are sold by the pair, and each set includes two matching sway bar end links.

These end links offer the quiet operation and long life of standard BMW end links, but with the strength and adjustability of rod-end style sway bar links. These sway bar links can be used on a wide variety of BMWs and aftermarket BMW suspensions. When measuring, please consider that the length ranges of our Custom Adjustable end links are measured from the center to center on the stud / pin, as shown in our diagram.

TMS Part#Center to Center (mm)Center to Center (inch)
TSU9912A35155.00mm - 170.00mm6.10" - 6.69"
TSU9912A40170.00mm - 185.00mm6.69" - 7.28"
TSU9912A45180.00mm - 195.00mm7.08" - 7.67"
TSU9912A50190.00mm - 205.00mm7.48" - 8.07"
TSU9912A55207.00mm - 222.00mm8.15" - 8.74"
TSU9912AF1220.00mm - 235.00mm8.66" - 9.25"
TSU9912A70240.00mm - 255.00mm9.45" - 10.04"
TSU4612AF3250.00mm - 265.00mm9.84" - 10.43"
TSU9912A80261.00mm - 276.00mm10.28" - 10.87"
TSU5012AF8280.00mm - 295.00mm11.02" - 11.61"
TSU9912A95290.00mm - 305.00mm11.42" - 12.00"
TSU9912110320.00mm - 335.00mm12.59" - 13.19"
TSU9912115330.00mm - 345.00mm
(standard E9X M3 length)
12.99" - 13.58"
(standard E9X M3 length)
TSU9912130362.00mm - 377.00mm14.25" - 14.84"
TSU9912135370.00mm - 385.00mm14.57" - 15.16"
TSU9912140381.00mm - 396.00mm15.00" - 15.60"
TSU9912145389.00mm - 404.00mm15.31" - 15.91"

Please select your length from the list below. Looking for a length that's not listed? Please call or email us. We can likely accommodate your needs!

This item fits the following BMWs:
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible
Turner Rear Swaybar Bushing - 24mm - E36
H&R - Corporate Logo
T#:193589
Part#: TMS-R-BUSH
In Stock
$25.45
$25.45
Turner sway bar bushings feature a special urethane/Teflon composite that prevents squeaks and eliminates the need for lubrication. No mess, no maintenance, a perfect fit. This is a replacement sway bar bushing for the Turner Motorsport 24mm adjustable rear sway bar. Sway bar bushings have a long life, but after many years and many miles of abuse, they can break down and cause handling issues.

Sold individually

This item fits the following BMWs:
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
Meyle HD Front Sway Bar Link for E30 318/325, E36 318/325/328, Z3
Meyle HD - Corporate Logo
T#:2272
Part#: TMS2272
In Stock
$79.90
Free Shipping on orders $99 and up

If you have a clunking sound in the front end, the front swaybar end-link is one of the items to check. The standard plastic ball joint inside the boot will wear or crack, allowing excess motion. This is a Meyle HD part with metal ball joints that will last longer than the standard design. These links are identical to the standard links except for the ball joint and mount the swaybar to the control arm. Meyle is a German brand in business since 1958 and all of their products are TUV approved and meet or exceed ISO standards. In addition, these links come with a 4-year, unlimited mileage warranty. Fits non-M models of the BMW E30, E36, and Z3. Sold per pair.

Features:

  • 4 Year Warranty

  • All metal ball joints are more reliable and longer lasting than stock

  • Bushings are solid rubber rather than fluid filled, providing longevity and handling feel improvements



Full Application List:
E30 1984-1991 318i, 318is, 318ic, 325, 325e, 325es, 325i, 325is, 325ic. Not for the AWD 325ix
E36 6/1992-1999 318i, 318is, 318ic, 323is, 323ic, 325i, 325is, 325ic, 328i, 328is, 328ic
Z3 1996-2002 1.9, 2.3, 2.5, 2.8, 3.0


H&R Swaybar Bushing - 23mm - E9X M3
H&R - Corporate Logo
T#:193581
Part#: 71053-BUSH
In Stock
$26.73
$20.61
Limited Qty Sale
$26.73
$20.61
Limited Qty Sale
H&R sway bar bushings feature a special urethane/Teflon composite that prevents squeak