Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Building on years of building some of the most used (and talked about!) Street and Race camber plates for the E46 M3 has brought us to the next iteration of this key suspension component. Introducing the Turner Motorsport Hybrid Street/Track Caster/Camber Plate designed exclusively for the E46 M3.
Front caster/camber plates play a key role in suspension configuration - providing a point to adjust alignment in the front of the vehicle. Without camber plates, it is not possible to dial in proper street and track alignment specifications to maximize handling and tire wear. A properly configured alignment is frequently the difference between a good car and a great car, trailing the pack and pace-setting lap times, frustrating tire wear and long tire life, or exhilarating handling and a car that fights through the turns.
Understanding the needs of a track enthusiast, our Race camber plates allow for zero deflection and are ideal for a dedicated track vehicle. For a dedicated street vehicle, our Street camber plates are another tried-and-true option that are comfortable and perform very well. Hearing the call from customers that don't fall cleanly into one of these groups, we've designed the best of both worlds - a rebuildable polyurethane-isolated spherical bearing, or as we call it, a "hybrid" design. These camber plates deliver exceptional lifespan, high performance, with excellent road manners.
We paid extra attention to the bearing we selected, knowing we needed a bearing that would not only be quiet, but reliable. Tens of thousands of street and track miles on a variety of applications yielded zero failures of the high quality PTFE-lined, maintenance-free stainless steel monoball spherical FK bearing. One of our secrets in enabling this high-performance bearing to function to its full potential is the 80a polyurethane isolation bushing. We identified just the right material density to allow for absorption of road noise while allowing dampers to articulate precisely and predictably. This tiny bit of cushion takes the brunt of potholes and rough roads, protecting the bearing from wear which may otherwise lead to premature failure. Equally critical to maximizing bearing life is the addition of dust seals to prevent moisture and dirt contamination. To top it all off, the entire assembly is rebuildable in the event that, over the years, a component does wear out.
By re-using the OEM spring perch and radial bearing, we've avoided supporting the weight of the vehicle on the strut shaft monoball - further extending the life of the bearing and mimicking a well-designed factory element. Spring perches for 60mm or 2.5" springs are also available; use of factory-style springs requires no additional perch. Inspect the shocks you plan on using these with, measuring the shock diameter (16mm or 14mm) and inspecting the seat (square or tapered) to ensure you select the correct kit for your application. Not sure which you need? Give us a call, we're happy to help.
Turner Motorsport Hybrid Street/Track Camber Plates: content on the street, ready to rip on the track.
Click here for installation instructions.
This item fits the following BMWs:
2001-2006 E46 BMW M3
These our the Turner Camber Plates used on our Championship-winning E46 M3 race cars. These plates adjust camber and caster and have a lot of important motorsport-developed features that other camber kits do not. These were a clean-sheet design when we raced the E46 M3 for five seasons in the Grand-Am/IMSA GS class. Design Highlights - | 60mm | 60mm I.D. coil over racing spring; select a 14mm or 16mm shock stem; select a tapered or square shock stem base |
| 2.25" | 2.25" I.D. coil over racing spring; select a 14mm or 16mm shock stem; select a tapered or square shock stem base |
| 2.50" | 2.50" I.D. coil over racing spring; select a 14mm or 16mm shock stem; select a tapered or square shock stem base |
| stock | stock-sized springs; 16mm shock stem; select a tapered or square shock stem base |
| Click here for the full listing of E46 M3 upper spring perches. or call us directly. The price for the camber plates does not include upper spring hats. | |
Clickhere for more information and installation and setup instructions.
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
These camber plates are perfect for the enthusiast owner who wants a high quality design with a motorsports background. Knowing a full race kit on the street is not often the best option, we took the best features from the Race Camber Plates and incorporated them into a fresh Street design -
The Turner E46 M3 Street Camber Plates are the most advanced design on the market. These are designed specifically for the E46 M3 - no shortcuts or cookie-cutter components. We started with a fresh design to make these very user friendly and easy to install and set up. The E46 M3 front suspension has unique geometry and the strut is mounted at an angle that can put significant side loading on the strut shaft if it's not located properly. The location and angles for the main bearing were carefully engineered to allow the proper motion ratio and strut angles during adjustment. This greatly reduces bending forces on the strut itself which improves performance and longevity. By designing for one chassis we're able to focus on what works best in that application - proper fitment and operation without unnecessary adapters, easy-to-use camber and caster adjustments, and an intelligent modular design.
For street use we added a pliable urethane bushing to absorb vibration and a special base design that works with the factory radial bearing and spring perch. The radial bearing allows the spring to rotate instead of twisting and binding. By re-using the factory radial bearing we can keep the assembled stack height lower for maximized shock travel. It's also a commonly-available item that you can get from any BMW dealer at a low price. All of the things that make it work well in the factory application carry over to our design. You can use our camber plates with a stock sized spring, 60mm, or 2.5" springs. Use your stock spring perch/bearing with stock-sized springs. The 60mm and 2.5" upper spring perches are sold separately. The beauty of our design is that you can use the factory radial bearing with any of these springs.
Another important feature of the Turner Camber Plates is the size of the upper plate. Our plates have a very large surface area to better spread strut forces through the strut tower. A smaller upper plate, like those found on competitor's kits, will localize strut forces and contribute to strut tower deformation ('strut tower mushrooming'). This is a very important feature especially as these cars get older and spend more time on the track. Deformed strut towers are a serious performance and safety concern and our camber plates are properly designed to handle the loads. The factory strut reinforcement plates are not required with our camber plates (but you can use them if you want to).
Since this design is specific to the E46 M3, we can build it with the bare minimum of adapters and extra hardware. This not only cuts down on confusion but makes it easier to assemble and operate. We use the correct-sized bearing for the 16mm strut shaft; no sleeves or bearing adapters required. The original tapered lower mount support and a small stainless steel spacer from our kit are all that's required to install. We have used our camber plates with most of the major strut manufacturers on the market - stock Sachs/Boge, Bilstein, Koni, H&R, ST, and KW. Our camber plates work with any strut that is designed to accept the factory strut mount.
Click here for installation instructions.
This item fits the following BMWs:
2001-2006 E46 BMW M3
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Our sealed Monoball Rear Trailing Arm Bushings (RTAB) are the best solution for completely eliminating deflection and unwanted toe changes on the rear of the E36, E46, and Z4. While rubber and urethane bushings flex during load, the toe can change widely giving you nervous and unpredictable handling. These RTABs have a solid aluminum housing with a high-quality sealed OE bearing. These bushings were developed from years of competition use in various racing and HPDE events. There is simply no better RTAB unless your racing class rules prohibit the use of mono or spherical bearings.
The rear trailing arm bushings take a lot of abuse from acclerating, braking and cornering. The stock rubber bushings are just not up to the task of keeping rear wheel alignment in spec for very long, especially if you have upgraded to stickier tires and a better suspension. The pliable rubber flexes and twists which slows down reaction time and leaves you with a car that feels nervous and 'tail happy'. Urethane helps to control the alignment but issues with fitment, maintenance, and longevity keep us from recommending urethane on anything but a street car. We also offer a Delrin RTAB for cars that must conform to certain racing class rules. These sealed spherical bearings are the best at controlling rear toe alignment.
Our aluminum RTABs are very well made - high grade aluminum alloy and steel CNC'd out of a billet by an ISO 9001 certified manufacturer, each component is either hardcoated or nickel plated. While multiple manufacturers offer two piece designs, our research showed that a one piece bushing is a better design featuring a sealed bearing to keep contaminants out extending the life of the bearing.
Features:
Key Benefits:
Design Features:
Clickhere for installation instructions.
This item fits the following BMWs:
1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
Stock rubber front control arm bushings are designed to allow significant fore/aft movement of the front wheels to help absorb road impacts. This soft flexible design maximizes daily driving comfort and helps to add the “luxury” feeling to your BMW, but it is far from ideal for the performance or racing enthusiast that is looking for optimal handling and braking performance. Being a bonded rubber bushing that is constantly twisting and deflecting when in use, stock rubber bushings really take a beating and often fail prematurely, resulting in further degraded handling, braking shimmy or even clunking felt under your feet.
In the past, the only upgrade option to improve handling of your E46 M3 was to replace the stock rubber with poly bushings, or delrin bushings that wear prematurely and are not serviceable or rebuild-able. While well-designed poly bushings can vastly improve handling characteristics and offer good road feel with minimal increase to NVH, they are still a compromise when it comes to ultimate handling and braking performance.
Introducing the new Turner Front Control Arm Spherical Bearings! The Turner engineering team set out to design a no-compromise solution that requires no modification and offers instantaneous cornering and braking response. Our control arm bearings utilize a unique grease-able spherical bearing that is both serviceable and replaceable, with integrated dust seals to help keep dirt and moisture out. This bearing offers considerable improvement in both precision and durability compared to other unsealed poly and delrin bushing inserts previously available, which can wear prematurely due to contamination. The bearing assembly utilizes the highest quality materials, precision machining quality, and components to ensure a perfect fit and longest lasting component life possible.
The result is the ultimate in terms of low friction, no binding, and no unwanted deflection, as well as exceptional steering precision, turn-in response, and direct braking feedback with minimal increase in NVH. These spherical bearings are a must have for any track car, but are also completely street-able and are a great upgrade for any enthusiast that enjoys spirited driving.
Features:
Bearing
Housing
Bearing Insert Arm adapter
Performance
Grease before installation and with each oil service with high quality Moly grease for maximum service life. Need a Grease tool?
Turner Motorsport Bushing Limiters were the first - and still the best - RTAB Limiter on the market. Instead of a 'floating' design that can rattle and wear, our aluminum Limiters are fixed in place and feature an anti-stick Teflon coating so the bushing never sticks and squeaks.
The great defect in the rear trailing arm bushing (RTAB) is that the soft rubber design allows too much movement and extension during cornering. The bushing is not strong enough to resist hard cornering loads. A stiffer bushing helps but has trade-offs in ride and comfort. If you want to maintain your ride comfort with rubber bushings, these RTAB Limiters will prolong their life and improve handling.
These Limiters sit on either side of the bushing and limit its movement. By limiting motion the bushing effectively becomes stiffer, improving handling and reducing toe change during cornering. When not cornering, the Limiters are not in play so ride comfort remains the same as stock. Our Limiters are permanently bolted to the housing that surrounds the bushing. Other types of Limiters 'float' between the bushing and housing, which can rattle and squeak as the bushings move. Instead of plastic or Delrin that will wear over time, our RTAB Limiters are made from aluminum with a tough hardcoat anodize (tougher than standard anodizing) and finished with a Teflon anti-stick coating.
Turner RTAB Limiter Kit includes -
Need E36/E46 RTAB bushings? Click here for replacement trailing arm bushings.
Click for installation instructions.
This item fits the following BMWs:
1992-1999 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2003-2010 E83 BMW X3 2.5 X3 3.0 X3 3.0si
2002-2008 E85 E86 BMW Z4 2.5 Z4 3.0 Z4 3.0i Z4 3.0si Z4 M Coupe Z4 M Roadster
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
TMS rear subframe bearings are designed to limit rear control arm movement relative to the subframe. The stock BMW subframe bushings are made out of rubber, which allows variance in suspension position due to deformation and compression. A race car needs to have all suspension points remain in place for proper setup. By using high grade aircraft aluminum alloy and high performance race bearings, the TMS bushing replacements are both lightweight and strong. The casing is designed so that if maximum motion occurs, the load will be evenly distributed throughout the casing. Our flanges are designed to spread the load on the subframe and limit movement. The bearing we use is an extra wide race bearing to distribute the load over a broader area. Each piece is anodized or nickel plated to withstand corrosion. These bushings are a perfect compliment to the TMS lower camber arms.
If you haven't already upgraded to Adjustable Camber Arms , your stock rear lower wishbones are letting your down. The stock rear camber arm/wishbone is designed to be flexible and weak. In an impact, it's designed to bend or even break to absorb energy and prevent damage to other more vital components. This is great on a regular street car. But on a track car, or heavily modified street car, these arms can bend just from cornering forces and that can introduce radical camber changes that will throw off the balance and handling of the car. This reinforcement solves all of that by tying the two sections of the arm together. This creates a single solid arm with minimal flex in the arm itself. We can't take credit for this innovation - BMW recognized the problem and did this on their factory Group N racecars. If you haven't made the jump to adjustable arms, or your racing class still requires the stock camber arm, then this kit is a must! Installation requires welding. Click here for installation instructions Top seller! The Turner Adjustable Rear Camber Arms: The Only Adjustable Arms Approved for Grand-Am Continental Tire Challenge Racing Series
Why you should use Turner Motorsport camber arms on your car:
Installation Instructions:
Instructions for Rod-End Style (TSU9940001)
Instructions for Bushing-End Style (TSU9940B77)
This item fits the following BMWs:
1992-1999 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2001-2006 SpecE46 BMW 330i 330ci
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
3 way adjustable 30mm front sway bar / swaybar for E46 M3. Includes bushings.
Sway bars are typically sold as a front and rear set to balance the handling. But a front sway bar only can also have excellent benefits, especially on a street car. Going with a larger front bar will improve steering and handling even at low-moderate speeds. Steering turn-in is faster and gives the car a more direct and responsive feel. Cars with staggered wheel fitments (a narrower front wheel compared to the rear) will especially benefit from this and help the front tire 'bite' into the road.
We use an adjustable 30mm sway bar that has been fine-tuned for use on the E46 M3. Urethane bushings with a reinforced inner core that requires no lubrication are included. These bars are crafted from a special spring steel that is both stronger and more resilient than competitive sway bars. They have been shot peened and heat treated, and feature precision forged ends.
This item fits the following BMWs:
2001-2006 E46 BMW M3
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
These adjustable rear links are only required when using sway bar / swaybars with a suspension with a very low ride height, where it may be necessary to adjust the length of the end links for proper sway bar clearance from the drive axles or other suspension components. These suspensions are usually found only on race cars but this may also apply to street cars with sport springs/sport coil overs that are lowered a lot. On most street cars lowered 1.5" or less, the stock links will be fine.
These end links feature a Heim joint, which allows enough lateral movement when disconnected to adjust the length of the link without removing the entire link from the car. This is particularly helpful when eliminating or adjusting preload while tuning the suspension. Similar links without this joint, can't be adjusted without totally removing the link from the car.
Built-in grease fittings allow for occasional lube, and a packet of grease is included. These links are sold as a set, and include two end links and hardware for H&R and TMS sway bars (other brands may not need the hardware).
At their shortest setting they are 2.875" hole to hole and on their longest setting they are 3.5" hole to hole.
*Note: these links will not work with factory or non-adjustable Eibach sway bars.
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
You get the best of both worlds with this pair of Turner Motorsport adjustable sway bar links. We searched far and wide to find the hidden gem of swaybar links. You get the same quiet operation and long life as the stock links plus the strength and adjustability of rod-end style sway bar links.
With the wide range of suspensions and sway bars available today adjustable sway bar links can help you with many problems. Along with the ability to remove preload you can change the length to maximize sway bar geometry. Example: if the sway bar hoop comes too close to the steering rack, oil cooler, or under tray in its suspension travel you can adjust it by simply lengthening or shorting the adjustment rod. In some cases you may need a longer or shorter adjustment rod to achieve optimal geometry. We also offer these same links in other custom lengths (click here) that may not be specific to BMW chassis.
Features:
Turner Swaybar Link Specs:
TSU9912AF1: 220.00mm - 235.00mm / 8.66" - 9.25"
TSU4612AF3: 250.00mm - 265.00mm / 9.84" - 10.43"
TSU5012AF8: 280.00mm - 295.00mm / 11.02" - 11.61"
TSU9912A95: 290.00mm - 305.00mm / 11.42" - 12.00"
These adjustable sway bar end links can be used on a variety of BMWs. Please select your car below. Please note these end links do not fit non-M E36, except 325i/is produced before 6/1992.
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
Our renowned TMS adjustable front sway bar / swaybar links for BMWs are now available in custom lengths, making them easy to order for any aftermarket or custom suspension setups. Simply measure for your ideal link length, and order the links with the best length range (below). Each sway bar link has a 10mm diameter mounting pin/stud, which is the typical factory/stock size for a universal fitment. These are sold by the pair, and each set includes two matching sway bar end links.
These end links offer the quiet operation and long life of "stock" BMW end links, but with the strength and adjustability of rod-end style sway bar links. These sway bar links can be used on a wide variety of BMWs and aftermarket BMW suspensions. When measuring, please consider that the length ranges of our Custom Adjustable end links are measured from the center to center on the end link mounting stud / pin, as shown in our diagram.
Note for E9X M3: the unique mounting on the M3 strut requires a set of our adapter seats (#TSU9912AF9). You can add them with your links from the menu below.
TMS Part#Center to Center (mm)Center to Center (inch)
TSU9912A35155.00mm - 170.00mm6.10" - 6.69"
TSU9912A40170.00mm - 185.00mm6.69" - 7.28"
TSU9912A45180.00mm - 195.00mm7.08" - 7.67"
TSU9912A50190.00mm - 205.00mm7.48" - 8.07"
TSU9912A55207.00mm - 222.00mm8.15" - 8.74"
TSU9912AF1220.00mm - 235.00mm8.66" - 9.25"
TSU9912A70240.00mm - 255.00mm9.45" - 10.04"
TSU4612AF3250.00mm - 265.00mm9.84" - 10.43"
TSU9912A80261.00mm - 276.00mm10.28" - 10.87"
TSU5012AF8280.00mm - 295.00mm11.02" - 11.61"
TSU9912A95290.00mm - 305.00mm11.42" - 12.00"
TSU9912110320.00mm - 335.00mm12.59" - 13.19"
TSU9912115330.00mm - 345.00mm12.99" - 13.58"
TSU9912130362.00mm - 377.00mm14.25" - 14.84"
TSU9912135370.00mm - 385.00mm14.57" - 15.16"
TSU9912140381.00mm - 396.00mm15.00" - 15.60"
TSU9912145389.00mm - 404.00mm15.31" - 15.91"
Please select your length below.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This is a NEW replacement polyurethane bushing used in our E46 M3 Front Street Camber Plates. This is a custom-manufactured part for Turner Motorsport, made with our own specifications. Replacement is straight-forward but does require the camber plates to be removed from the car. Price is for each bushing.
This item fits the following BMWs:
2001-2006 E46 BMW M3 with Front Turner Street Camber Plate
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
