Top Turner Suspension & Camber Products | E9X 3 Series

Clear BMW chassis

Please ensure your correct model is selected

Turner has everything you need to control body roll, manage your ride height, stiffen up and give you the adjustability you need to set up your BMW.

Front Upper and Lower Control Arm Monoball Upgrade - Left And Right -...
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Turner Motorsport - Corporate Logo
T#:386421
Part#: E9X0031313TKT
Ships on Mar 22, 2027
Sale - Save 20% $ 1,143.99

This product was last offered at the strikethrough price on
11-07-2026

$ 915.19 USD
Free Shipping
Sale - Save 20%
$ 1,143.99

This product was last offered at the strikethrough price on
11-07-2026

$ 915.19 USD
Free Shipping

M3 upper and lower control arms are a known upgrade for non-M E82 and E9X chassis. But our Monoball Thurst Arms are even more of an upgrade over the stock M3 arms. This package bundles the Turner Monoball upper thrust arms with the stock M3 lower control arms. If there's one big fail point in the E82/E9X front suspension it's the thrust arms. The front inner thrust arm bushing is filled with dampening fluid that leaks over time. Once it's gone the bushing has the strength of a rubber band. Even though we sell two types of upgraded rubber bushings there was still room for improvement. For someone looking for superior performance and longevity these sealed monoball bushings are the best out there. 

The advantage of a monoball bearing is that it will not deflect under load. All of the rubber bushings, including the M3, move in all sorts of directions and that changes your alignment, especially when used with big brake kits or when driven hard. And when worn out, performance suffers. Our monoball sits in a CNC machined aluminum housing which has zero deflection. The monoball allows complete freedom of movement but only at the desired angles. What you get is superior steering precision, better handling from more consistent alignment, and almost infinite bushing life. And thanks to the inner liner and sealed rubber boots there's none of the extra noise or reduced service life of fully solid race bushings.

The lower M3 control arm bushings use a similar sealed monoball bushing instead of rubber. This package gives you monoball precision and performance with OE-quality components.

This item fits the following BMWs: 
2008-2012 E82 BMW 128i 135i 1M Coupe 
2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan 
2006-2012 E91 BMW 328i - Wagon 
2007-2013 E92 BMW 328i 335i 335is M3 - Coupe 
2007-2013 E93 BMW 328i 335i M3 - Convertible 
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is 

Show More Show Less
Front Upper Control Arm Monoball Upgrade - Left and Right - E82, E89,...
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Turner Motorsport - Corporate Logo
T#:221983
Part#: TSUE9080QIS-ARMS
In Stock
Sale - Save 25% $ 745.99

This product was last offered at the strikethrough price on
11-07-2026

$ 559.49 USD
Free Shipping
Sale - Save 25%
$ 745.99

This product was last offered at the strikethrough price on
11-07-2026

$ 559.49 USD
Free Shipping

BMW’s are known to have failure prone front thrust arm bushings.  The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change.  This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience.  Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. 

For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available!  Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).  We wanted to offer E31, E32, E34, E38, E39, E53, E60, E63, E64, and E83 owners similar levels of handling precision and control for the track and street. 

The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise.  We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting.  The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment.  What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

We offer these thrust arms with the monoball bushings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms.

Features:

Bearing housing

  • Precision CNC machined from 6061-T6 blue anodized aluminum
  • Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands.
  • CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. 

Bearing

  • OEM BMW sealed and greased ball joint for exceptional durability and service life.

Performance

  • Nearly instantaneous, crisp steering and braking response.
  • Maintenance free, long lasting performance. 
  • Improved road feel without undesirable NVH.

Sold as a pair for RWD models only.

Click here for installation instructions.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
2006-2012 E91 BMW 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Show More Show Less
Front Upper Control Arm Bushing Set (FCAB) - Monoball - E82, E89, E90...
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Turner Motorsport - Corporate Logo
T#:221982
Part#: TSUE9080QIS
In Stock
Sale - Save 27% $ 418.99

This product was last offered at the strikethrough price on
11-07-2026

$ 307.49 USD
Free Shipping
Sale - Save 27%
$ 418.99

This product was last offered at the strikethrough price on
11-07-2026

$ 307.49 USD
Free Shipping

BMW’s are known to have failure prone front thrust arm bushings.  The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change.  This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience.  Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. 

For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available!  Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).  We wanted to offer E31, E32, E34, E38, E39, E53, E60, E63, E64, and E83 owners similar levels of handling precision and control for the track and street. 

The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise.  We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting.  The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment.  What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

We offer these thrust arms with the monoball bushings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms.

Features:

Bearing housing

  • Precision CNC machined from 6061-T6 blue anodized aluminum
  • Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands.
  • CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. 

Bearing

  • OEM BMW sealed and greased ball joint for exceptional durability and service life.

Performance

  • Nearly instantaneous, crisp steering and braking response.
  • Maintenance free, long lasting performance. 
  • Improved road feel without undesirable NVH.

Sold as a pair for RWD models only.

Click here for installation instructions.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
2006-2012 E91 BMW 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Show More Show Less

Turner Motorsport Thrust Arm Monoball Upgrade - Pre-Installed Arms -E...
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Turner Motorsport - Corporate Logo
T#:401560
Part#: 022010TMS02
In Stock
Sale - Save 3% $ 702.99

This product was last offered at the strikethrough price on
11-07-2026

$ 681.90 USD
Free Shipping
Sale - Save 3%
$ 702.99

This product was last offered at the strikethrough price on
11-07-2026

$ 681.90 USD
Free Shipping
BMW’s are known to have failure prone front thrust arm bushings. The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change. This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience. Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available! Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011). We wanted to offer E31, E32, E34, E38, E39, E53, E60, E63, E64, and E83 owners similar levels of handling precision and control for the track and street. The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise. We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting. The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment. What you get is superior steering precision, turn-in response, direct braking feedback, and better handling. In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.
Show More Show Less

Turner Motorsport Front Control Arm Bearing Upgrade - Pre-Installed ...
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Turner Motorsport - Corporate Logo
T#:401264
Part#: 013277TMS03
No longer available
No longer available

BMW’s are known to have failure prone front thrust arm bushings.  The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change.  This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience.  Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. 

For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available!  Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).  We wanted to offer E31, E32, E34, E38, E39, E53, E60, E63, E64, E83, and F8x M2/M3/M4 owners similar levels of handling precision and control for the track and street. 

The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise.  We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting.  The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment.  What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

World-class features:

  • Corrosion resistant 304 Stainless steel shell.
  • Corrosion resistant 304 Stainless steel bolt sleeves.
  • Corrosion resistant 304 Stainless steel snap rings.
  • Sealed spherical ball joint for long service life.  
  • OE fitment.
  • Does not require vehicle to be at ride height to be torqued to spec.

 

Performance Benefits:

  • Very streetable, quieter than poly with minimal NVH.
  • Improved steering feel and cornering response
  • Reduced friction over OE rubber bushing with no unwanted deflection under cornering and braking forces.
  • Does not require vehicle to be at ride height to be torqued to spec.

 

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
2006-2011 E90 BMW 325i 328i 330i 335i - Sedan
2006-2011 E91 BMW 328i - Wagon
2007-2012 E92 BMW 328i 335i 335is - Coupe
2007-2012 E93 BMW 328i 335i - Convertible

Show More Show Less
Turner Spherical Thrust Arm Bearing Set - E90, E91, E92 AWD, E84 X1 ...
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Turner Motorsport - Corporate Logo
T#:568233
Part#: 022010TMS03
In Stock
Sale - Save 5% $ 468.99

This product was last offered at the strikethrough price on
11-07-2026

$ 445.54 USD
Free Shipping
Sale - Save 5%
$ 468.99

This product was last offered at the strikethrough price on
11-07-2026

$ 445.54 USD
Free Shipping

BMW’s are known to have failure prone front thrust arm bushings.  The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change.  This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience.  Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. 

For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available!  Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).  We wanted to offer E31, E32, E34, E38, E39, E53, E60, E63, E64, and E83 owners similar levels of handling precision and control for the track and street. 

The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise.  We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting.  The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment.  What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

 

 

Watch to learn more about Turner Monoball Bushings

 

 

We offer these thrust arms with the monoball bushings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available pre - installed if you want to avoid having these pressed in.

*Installation instructions*

Features:

Bearing housing

  • Precision CNC machined from 6061-T6 blue anodized aluminum
  • Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands.
  • CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. 

Bearing

  • OEM BMW sealed and greased ball joint for exceptional durability and service life.

Performance

  • Nearly instantaneous, crisp steering and braking response.
  • Maintenance free, long lasting performance. 
  • Improved road feel without undesirable NVH.

This item fits the following AWD BMWs:
2006-2011 E90 BMW 325i 328i 330i 335i - Sedan AWD
2006-2011 E91 BMW 328i - Wagon AWD
2007-2012 E92 BMW 328i 335i 335is - Coupe AWD
2013-2015 E84 BMW X1 xDrive28i X1 xDrive35i 
 

Show More Show Less

Turner Front Fixed Camber Plates - E9x Non-M RWD
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Turner Motorsport - Corporate Logo
T#:588325
Part#: 025532TMS01
In Stock
Sale - Save 16% $ 238.99

This product was last offered at the strikethrough price on
11-07-2026

$ 199.99 USD
Free Shipping
Sale - Save 16%
$ 238.99

This product was last offered at the strikethrough price on
11-07-2026

$ 199.99 USD
Free Shipping

One of the tricks for getting your BMW to handle better is to add negative camber to the front wheels. This will put more of the tire's width in contact with the ground during cornering. With more rubber there is more grip. BMWs typically have less camber in the front to create understeer. But if you're running a stock setup on the track or autocross you are giving up speed and time as the front tires run out of grip sooner than they should.

Our E90 E92 E93 fixed camber plates are designed from the knowledge we gained from our highly successful racing campaigns with the E46 in the Speed World Challenge series. Our camber plates are offset for the best camber and caster combination for racing purposes when using the stock-diameter sized springs. Camber increases to -2.5° depending on your individual suspension setup, while only increasing ride height by 6mm. The rate of camber change is virtually unaffected throughout the range of suspension travel, reducing the need for other geometry correction. Fixed mount camber plates are legal in many racing and autocross classes - these are the perfect camber solution when adjustable plates are not allowed in your class.

These are very simple to install, requiring only pressing out locator dowels and studs in your factory strut mounts. See below for detailed instructions.

Show More Show Less
E82, E9X Front Strut Tower Reinforcement Plates (Pair)
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Turner Motorsport - Corporate Logo
T#:2720
Part#: TSU9075STR
In Stock
Sale - Save 40% $ 89.99

This product was last offered at the strikethrough price on
11-07-2026

$ 53.99 USD
Free Shipping
Sale - Save 40%
$ 89.99

This product was last offered at the strikethrough price on
11-07-2026

$ 53.99 USD
Free Shipping
Made in the USA Help preserve the structural integrity of your BMW E82 1-series, or E90, E91, E92, or E93 3-series with these weld-in strut tower reinforcement plates. Deformation of the front upper strut tower has been common problem, especially in race-prepped cars, cars with lowered suspensions, any car that sees track use, or BMWs driven on rough roads. The strut tower deforms from suspension bottoming out, forces generated by the spring/shock assembly, and that forced concentrated in a relatively small area on the strut tower. The strut tower will exhibit deforming by cracking (especially around the stud holes), or "mushrooming" where the tower takes on a dome-shaped top instead of being flat. By thickening the sheetmetal material of the tower, you are making it stronger and more robust to prevent deformation. While the E82 and E9x cars are newer and better made than the previous E36 and E46 cars, any suspension modification or track use will make the new cars more susceptible to this problem.

These are mounted on the underside of the strut tower and need to be welded into place.

This chassis reinforcement fits the following BMWs:
2008+ E82 BMW 128i 135i
2006+ E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335i 335xi 335i xDrive M3
2007+ E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3
2007+ E93 BMW 328i 328xi 328i xDrive 335i 335xi 335i xDrive M3
Show More Show Less

Performance Adjustable Swaybar End Link Set - E9X Non-M, E82/88 128/1...
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Turner Motorsport - Corporate Logo
T#:588017
Part#: 025990TMS08
In Stock
Sale - Save 17% $ 331.99

This product was last offered at the strikethrough price on
11-07-2026

$ 274.99 USD
Limited Qty Sale
Free Shipping
Sale - Save 17%
$ 331.99

This product was last offered at the strikethrough price on
11-07-2026

$ 274.99 USD
Limited Qty Sale
Free Shipping
When lowering your BMW without changing your swaybar end links, a significant amount of preload is applied to the swaybar. This can negatively affect the handling characteristics of your vehicle and cause unwanted stress on a number of other suspension components. Luckily, this can easily be remedied with our very own Turner Performance Adjustable Swaybar End Links! These adjustable end links are designed specifically for your lowered BMW, featuring heat-treated chromoly studs, Teflon lined 1/2" solid bearings with 65 degrees of articulation, CNC machined 6061 and 2024 aluminum shafts, and high-grade hardware for unparalleled performance and reliability. These end links are made 100% in America from American sourced parts and materials!
Show More Show Less

Turner Performance Adjustable Front Lower Control Arms - E82/88 E9X ...
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Turner Motorsport - Corporate Logo
T#:588023
Part#: 025990TMS02
In Stock
Sale - Save 16% $ 956.99

This product was last offered at the strikethrough price on
11-07-2026

$ 799.99 USD
Free Shipping
Sale - Save 16%
$ 956.99

This product was last offered at the strikethrough price on
11-07-2026

$ 799.99 USD
Free Shipping
Looking for upgraded lower control arms that don't limit adjustment capabilities like the OE control arms? These Turner Performance Lower Control Arms may be exactly what you need! These CNC'd billet aluminum control arms allow you to adjust roll center, camber, and track width easily and lock in your adjustments securely. The construction of these control arms allows for significant weight savings, reducing unsprung weight, while maintaining high levels of strength that is up to track use and abuse. Instead of using traditional jam nuts, these Turner Control Arms utilize a pinch bolt and rotating clamp design that allows high clamping forces to lock in track width and camper specifications without making it difficult to keep bearings properly aligned. Stainless steel spacers are included to enable roll center correction for lowered vehicles. To further improve control arm operation over the OE design, these control arms use FK rod ends and high misalignment solid spherical bushings to get rid of binding and flex. Features: Lightweight Aluminum, Titanium, Chromoly and Stainless Steel construction Correct ball joint angle for full articulation Clamp design allows for easy access to lock down your alignment settings Low friction 3-piece Teflon lined FK spherical bushings and Heim joints/rod ends Multiple size stainless steel roll center spacers for precise adjustment
Show More Show Less
Turner Motorsport Spherical Rear Upper Shock Mounts - E9x E8x non-M ...
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Improve shock efficiency and increase shock travel on lowered BMWs!
Turner Motorsport - Corporate Logo
T#:556649
Part#: 010019TMS01
In Stock
$ 352.99 USD
Free Shipping
$ 352.99 USD
Free Shipping
No matter whether your E9x or E8x is N52, N54, or N55 powered, your rear upper shock mounts (33506771738) will fail. We set out to design the ultimate performance spherical monoball rear upper shock mount, and we believe we have exactly that. Our monoball rear upper shock mounts eliminate any unwanted deflection, maximizing shock efficiency and performance - this means full body shock body articulation, reducing side loading and improving shock wear. Our Turner Motorsport rear upper shock mounts also offer flexibility in shock position - our kit enables you to either raise your shock position by 7.5mm or lower it by 4.5mm. We recommend running the raised 7.5mm for increased shock travel on lowered vehicles. On the other hand, if you're looking to retain bump stops, washers, and shock boots, you can run the 4.5mm lowered shock position. NOTE: You may experience a slight increase in NVH when using our monoball rear upper shock mounts, but we think it is justified by the eliminated deflection and setup flexibility offered by this kit. Design features: Billet CNC 6061-T6 aluminum, type III anodized for exceptional durability and corrosion resistance Teflon lined spherical bearing Self-lubricating PTFE liners are chemically bonded to the inner diameter of the race to offer a very high load-carrying capacity with greatly increased dynamic wear characteristics. Bearing inserts are CNC machined 1144 steel, heat treated and melonite coated Maximize ball articulation while offering exceptional durability and corrosion resistance Static Axial Load Rating: 10,800 lbs. Rod End Misalign Angle: 6 degrees Fully rebuildable Made in USA!
Show More Show Less
Turner Monoball Race Lower Rear Shock Mount - Pair - E88, E82, E9X ...
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Turner Motorsport - Corporate Logo
T#:552860
Part#: 024572TMS03
In Stock
Sale - Save 15% $ 382.99

This product was last offered at the strikethrough price on
11-07-2026

$ 325.54 USD
Free Shipping
Sale - Save 15%
$ 382.99

This product was last offered at the strikethrough price on
11-07-2026

$ 325.54 USD
Free Shipping

Rubber mounts in any position of a vehicle are usually designed with comfort and longevity in mind leaving performance as a sacrifice. This kind of sacrifice here at Turner just won't do, so we did what we do best and designed a solid monoball mount.

Our engineering team first wanted to tackle the issue with wear found on rubber mounts. Due to their combination of steel, rubber, and low mounting location, these mounts are a direct target for deterioration and failure. As they are positioned out in the open and exposed to the elements, bonded steel and rubber components inevitably hold moisture, separating as the steel bearing begins to rust. Our solution was to offer a rebuildable mount with a Teflon lined bearing for increased durability, combined with a blue anodized body and melonite coated bushing sleeves for corrosion resistance.

The performance side of these mounts is primarily found in the articulation allowed by the bearing. Rubber mounts do not allow for proper free damper movement, hindering shock performance. By eliminating the deflection found in factory rubber mounts and allowing full shock articulation, this solid monoball design eliminates slop and maximizes shock efficiency and performance, allowing for more predictable handling on the street or the track - with almost zero added noise, vibration, and harshness.

 

Replaces OE part #: 33526768544

 

Key Benefits:

  • Monoball rear lower shock mount eliminates unwanted deflection, maximizing shock efficiency and performance.
  • Allows full shock body articulation for low friction movement and reduced side loading and improved shock wear.
  • Designed to work with stock non-M taper seat stud style shocks (not M eyelet mount type).
  • Maintains OE shock position

 

Design features:

  • Rebuildable using off the shelf bearings - these are the last rear shock mounts you’ll need to buy
  • Includes new hardware
  • Made in USA

 

Housing:

  • Billet CNC 6061-T6 aluminum housing, type II anodized for exceptional durability and corrosion resistance

 

Bearing:

  • FK WSSX14T teflon lined spherical bearing
  • 440C heat-treated stainless steel ball, 1 ⅜” ball dia.
  • 17-4 PH heat-treated stainless steel race
  • Self-lubricating PTFE liners are chemically bonded to the inner diameter of the race to offer a very high load-carrying capacity with greatly increased dynamic wear characteristics.
  • Static Axial Load Rating: 10,800 lbs.
  • Rod End Misalign Angle: 6 degrees

 

Bearing inserts:

  • CNC machined 1144 steel, heat treated and melonite coated designed to maximize ball articulation while offering exceptional durability and corrosion resistance.

 

This item fits the following BMWs: 
2008-2013 E82 BMW 128i 135i 135is Coupe 
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan 
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon 
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe 
2007-2013 E93 BMW 328i 335i 335is - Convertible 

 

 

Show More Show Less


Turner Adjustable Toe Arms - E82/E9X M
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Turner Motorsport - Corporate Logo
T#:590305
Part#: 024651TMS03
In Stock
Sale - Save 10% $ 410.99

This product was last offered at the strikethrough price on
11-13-2026

Starting at $ 370.99 USD
Free Shipping
Sale - Save 10%
$ 410.99

This product was last offered at the strikethrough price on
11-13-2026

Starting at $ 370.99 USD
Free Shipping
Eliminate any unwanted movement in your rear end by eliminating the cumbersome factory eccentric toe adjustment points! This opens up a wider range of toe adjustment for your alignment needs!
Turner Adjustable Toe Arms - E8X/E9X Non-M
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Turner Motorsport - Corporate Logo
T#:590308
Part#: 018139TMS03
In Stock
Starting at $ 419.99 USD
Free Shipping
Starting at $ 419.99 USD
Free Shipping
Upgrade your factory toe arms with rubber bushings for Turner Toe Arms. Sporting high quality American made FK Bearing Rod Ends for maximum Performance and superior lifespan. Turner Toe arms also Eliminate the cumbersome factory eccentric toe adjustment point, to eliminate any unwanted play/movement, and keep your rear end more planted.
Show More Show Less
Turner Front Aluminum Strut Brace - E9X 325i, 328i, 330i ,335i - E82...
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Turner Motorsport - Corporate Logo
T#:12256
Part#: 067037
No longer available
No longer available
Improve the handling and steering response of your BMW today with a Turner Motorsport strut brace.

Turner Motorsport developed these in association with our European partners to provide a higher quality and better performing strut brace than our competitors. Made of aircraft grade aluminum these strut braces - also know as a "stressbar" - help to minimize chassis flex during the hardest cornering, which keeps your tires squarely on the road and delivers the traction you need when you need it most. Shock absorption is also increased, which reduces road forces and body roll and lends a firmer road-feel. Strut braces provide benefits for both street driven and track driven BMW's.

This item fits the following BMWs:
2008-2013 E82 BMW 128i 135i 135is
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2012 E93 BMW 328i 335i - Convertible
Show More Show Less