E90 325i/328i/330i Sedan H&R Touring Cup Kit Suspension Package
- Mfg Part #
- Turner Part #
Does this fit my vehicle?
For accurate results, specify your model below.
- Matching Shock & Spring Package
- Comparable to a H&R Sport spring - mild upgrade over stock
- Improved handling with minimal impact on ride comfort
A shock and spring package like this H&R Touring Cup Kit is a great first step in improving the handling of your E90 sedan. Not only is there an improvement in the car' stance, the lower and stiffer springs help to improve handling and reduce bodyroll.
H&R Touring Cup Kit springs lower the ride height as much as 1.3" in front and 1.2" in the back and stiffens the spring rate. Both combine to lower the car's center of gravity and reduce the amount of bodyroll in corners. The springs are progressive rate so their initial stiffness is actually very compliant and it becomes stiffer as the spring is compressed. This is great for street cars that see bumps and potholes where suspension compliance is key. Overall, they are about 35% stiffer than the stock original springs. Lowering amount will be less if replacing the factory sport suspension. This package fits with the stock strut and shock mounts, making for an easy and clean install.
This H&R Cup Kit is a tuned shock/spring package for the E90 sedan. H&R matches a set of springs to performance shocks for a perfectly setup and functioning suspension package. Instead of mixing and matching springs with shocks, H&R has tailored each shock for the specific model, taking into account spring rates, chassis setup, and suspension motions. Without the shocks and springs working together the suspension may have incorrect travel or be a mis-match for spring rate (under-dampened) or too stiff. This E90 Cup Kit addresses all of that.
This item fits the following BMWs:
2006-2011 E90 BMW 325i 328i 330i - Sedan - Not for All Wheel Drive Models
This Part Fits the Following BMWs