BMW Tools & Specialty Equipment for BMW E10 2002tii M15 2.0L

Clear BMW chassis

Please ensure your correct model is selected

Performing certain maintenance and adjustments on your BMW is often a hassle or impossible without the proper tools. The difference between an enthusiast and an owner is the determination to get the job done on our own cars for pure satisfaction and to strengthen the bonds we share. All the specific tools you need to get the job done right, from fan clutch tools, cam alignment tools, and steering rack alignment tools, to coilover adjustment spanners, diagnostic equipment, and more have all been selected by our experts to help maintain your BMW.

Sub-Categories

Sort By:

ESCO - Corporate Logo
T#:33746538
Part#: ESC-10497
Ships on Oct 26, 2026
$ 81.99 USD
Free Shipping on orders $49 and up
Esco Equipment Jack Stand 3 ton capacity Unique flat top with rubber cushion European design with stable support arms Circular base pads Min Height 13.2" ; Max 21.5" 3 Ton Jack Stand--Flat Top with Rubber Cushion (Shipped as 1 stand--order 2 for a set)
Show More Show Less
Schwaben by Race Ramps - Corporate Logo
T#:363130
Part#: 006182SCH01A
In Stock
$ 232.99 USD
Free Shipping
$ 232.99 USD
Free Shipping
  • Tough and rigid expanded polystyrene foam (EPS) with a load rating of 1,500lbs per wheel (almost twice what the normal corner weight would be on a 3-series BMW)
  • 12" height X 12" width with minimal compression under load
  • Light weight with each block weighing less than 6lbs and with a handy strap for carrying or hanging
  • Curved cradle for the tire to sit inside
  • Non-skid surface that won't scratch your floor

Looking for an alternative to your jack stands? With these wheel blocks you won't have to think twice about a jack stand scratching or denting the underside of your floor or the car falling off the jack stand. These work best when used with a floor jack under the subframe and the opposite axle wheels chocked. These are also a light weight and inexpensive alternative to the super-pricey plastic and metal ramps. They are resistant to most fluids and chemicals (but not solvents) and will never rust unlike metal ramps and blocks.

Also available in a 10" height.

Show More Show Less
ATD Tools - Corporate Logo
T#:1211204
Part#: ATD-5184
Ships in 2 Business Days
$ 46.99 USD
Free Shipping on orders $49 and up
For easier, cleaner fluid changes

ATD Tools - Corporate Logo
T#:3629264
Part#: ATD276
Ships in 6 Business Days
$ 446.99 USD
Free Shipping
$ 446.99 USD
Free Shipping
Made from Titanium coated alloy steel for durability and precision threading. You can do it all with complete kit.

ATD Tools - Corporate Logo
T#:641941
Part#: ATD5478
Ships in 6 Business Days
$ 294.99 USD
Free Shipping
$ 294.99 USD
Free Shipping
This great set does all the popular flares
ATD Tools - Corporate Logo
T#:3729784
Part#: ATD359
Ships in 6 Business Days
$ 71.99 USD
Free Shipping on orders $49 and up
Always have extra copper washers

ATD Tools - Corporate Logo
T#:5677365
Part#: ATD5573A
Ships in 6 Business Days
$ 359.99 USD
Free Shipping
$ 359.99 USD
Free Shipping
Use this tool to check for internal engine leaks
ATD Tools - Corporate Logo
T#:642052
Part#: ATD576
Ships in 6 Business Days
$ 46.99 USD
Free Shipping on orders $49 and up
Mount on your work bench for easy access.

ATD Tools - Corporate Logo
T#:383737
Part#: ATD8630
Ships in 6 Business Days
$ 95.99 USD
Free Shipping on orders $49 and up
Got a tire leak? no problem

ATD Tools - Corporate Logo
T#:589830
Part#: ATD5233
Ships in 6 Business Days
$ 80.99 USD
Free Shipping on orders $49 and up
3/8" drive oil filter sockets fit many newer applications
ATD Tools - Corporate Logo
T#:5691178
Part#: ATD4075
Ships in 6 Business Days
$ 73.99 USD
Free Shipping on orders $49 and up
A brass punch will soften the blow for delicate tasks. Another advantage is they are non sparking. Great when working around flammables.
ATD Tools - Corporate Logo
T#:3657943
Part#: ATD3601
Ships in 1 Business Day
$ 59.99 USD
Free Shipping on orders $49 and up
Always have extra o-rings


ATD Tools - Corporate Logo
T#:3729820
Part#: ATD13787
Ships in 2 Business Days
$ 53.99 USD
Free Shipping on orders $49 and up
Hex headed bolt are everywhere on modern cars. Be prepared with this complete set.
Schwaben by Race Ramps - Corporate Logo
T#:378235
Part#: 006181SCH01A
Special Order: No Guaranteed ETA
$ 214.99 USD
$ 214.99 USD
  • Tough and rigid expanded polystyrene foam (EPS) with a load rating of 1,500lbs per wheel (almost twice what the normal corner weight would be on a 3-series BMW)
  • 10" height X 12" width with minimal compression under load
  • Light weight with each block weighing less than 6lbs and with a handy strap for carrying or hanging
  • Curved cradle for the tire to sit inside
  • Non-skid surface that won't scratch your floor

Looking for an alternative to your jack stands? With these wheel blocks you won't have to think twice about a jack stand scratching or denting the underside of your floor or the car falling off the jack stand. These work best when used with a floor jack under the subframe and the opposite axle wheels chocked. These are also a light weight and inexpensive alternative to the super-pricey plastic and metal ramps. They are resistant to most fluids and chemicals (but not solvents) and will never rust unlike metal ramps and blocks.

Also available in a 12" height.

Show More Show Less
ATD Tools - Corporate Logo
T#:383741
Part#: ATD8762
Ships in 6 Business Days
$ 66.99 USD
Free Shipping on orders $49 and up
The perfect place to put your nuts while you work on your car

ATD Tools - Corporate Logo
T#:385276
Part#: ATD387
Ships in 6 Business Days
$ 143.99 USD
Free Shipping
$ 143.99 USD
Free Shipping
You never know when you will need another O-ring

ATD Tools - Corporate Logo
T#:383676
Part#: ATD4380
Ships in 6 Business Days
$ 514.99 USD
Free Shipping on orders $49 and up
Torque down wheels without using a torque wrench, with these extensions (sockets not included)
ATD Tools - Corporate Logo
T#:3629267
Part#: ATD3300
Ships in 6 Business Days
$ 497.99 USD
Free Shipping
$ 497.99 USD
Free Shipping
Adapters for most European and domestic vehicles

ATD Tools - Corporate Logo
T#:3729739
Part#: ATD5192
Ships in 6 Business Days
$ 59.99 USD
$ 59.99 USD
Extend you catch area by adding this funnel
Innovative Products - Corporate Logo
T#:3729817
Part#: IPA8080
Ships in 4 Business Days
$ 14.99 USD
Free Shipping on orders $49 and up
Clean bores and rusty holes with this brush set

ATD Tools - Corporate Logo
T#:3672453
Part#: ATD814
Ships in 6 Business Days
$ 132.99 USD
Free Shipping
$ 132.99 USD
Free Shipping
Don't come up short, these long needle nose pliers can get you out of a jam.

ATD Tools - Corporate Logo
T#:3729821
Part#: ATD393
Ships in 6 Business Days
$ 73.99 USD
Free Shipping on orders $49 and up
Keep your wires neat and clean
ATD Tools - Corporate Logo
T#:4070468
Part#: ATD7482
Ships in 6 Business Days
$ 470.99 USD
$ 470.99 USD
Designed with bottom parts tray and extra cross beam for added support
ATD Tools - Corporate Logo
T#:30164631
Part#: ATD9890
Ships in 6 Business Days
$ 332.99 USD
Free Shipping on orders $49 and up

Features:

  • Convenient source of compressed air in remote locations
  • Air line shut-off valve, pressure-relief valve and pressure gauge for safety
  • Heavy-gauge steel construction

Specifications:

  • Working pressure: 125 psi
  • Safety pressure: 127-140 psi
  • Weight: 20.46 lbs.
  • Overall size: 21-1/8" L x 12" D


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less


ATD Tools - Corporate Logo
T#:394648
Part#: ATD5002
Ships on Oct 2, 2026
$ 90.99 USD
Free Shipping on orders $49 and up
ATD Tools - Corporate Logo
T#:383716
Part#: ATD3045
Ships on Oct 2, 2026
$ 376.99 USD
Free Shipping
$ 376.99 USD
Free Shipping
Eases removal of flange-type axles, oil seals, bearings and other press fit parts.