BMW Interior Parts for BMW E10 2002tii M15 2.0L

Clear BMW chassis
The interior of your BMW is where you will hopefully spend most of your time, so it should be ergonomic, comfortable, and safe. All interior components, from OEM replacement switches, trim, or steering wheels, to aftermarket upgrades like racing wheels, safety equipment, and racing seats, are available at Turner Motorsport.

Recaro Universal Seat Sliders
Recaro - Corporate Logo
T#:338212
Part#: 0.70.X
On Order, ETA May 20, 2019
Starting at $135.00
Starting at $135.00
If you want fore-aft adjustment on your Recaro seat you will need a set of sliders. These are the genuine Recaro sliders that are some of the finest quality that we have seen. The sliders fit between the vehicle adapter and the seat brackets. There are two types depending on how your floor adapters work - without tabs and with tabs.

Recaro Seat Slider types -
Without Tabs - offers the lowest possible seating position - the total height of the sliders is 22mm (7/8"); the sliders are sandwiched between the floor mount and seat; the bolts install to the floor mount perpendicular to the ground; works with flat Macht Schnell or VAC style floor mounts only.
With Tabs - the sliders have tabs on each end with three height positions; the positions allow height and rake adjustments but means it's taller than the version without tabs - total height with the tabs is 58mm (2.25"); the tabs mean the mounting bolts install parallel to the ground; some floor mounts require the tab style (Wedge Engineering for example).

The Recaro sliders are all steel - pulling the handle moves teeth on two tracks which is more secure and stable than a single track. This set of sliders has the bar on the inside of the track (the most common for BMW fitments).

Sold per seat.
VDO Head Unit - USB, and Aux Input
VDO - Corporate Logo
T#:554675
Part#: TR7412UB-OR
In Stock
$169.95
Free Shipping

Tired of dealing with an old radio that has worn out buttons, a burnt out display, and/or no easy way to connect your audio device without putting in some ugly modern head unit? That's where this VDO Head Unit with USB, and Auxiliary Input comes in! The sleek but simple styling of this VDO head unit is designed with a stock-style appearance, helping to retain a period correct look but with most of the modern features that make this unit an amazing product.

Key Features:

  • MP3 compatible head unit  
  • USB port
  • AUX input
  • Shallow installation for maximum clearance behind the unit
  • Wiring harness CA0504U-LS sold separately 

*Please note this is a aftermarket head unit and may require custom mounting, wiring or surrounds, professional installation is recommended*

Turner Motorsport Racing Aluminum Pedal Set for Manual Transmission
Turner Motorsport - Corporate Logo
T#:339007
Part#: TMS339007
In Stock
Starting at $112.95
Free Shipping
Starting at $112.95
Free Shipping

These aluminum pedals were designed with one thing in mind -- performance. We wanted a pedal set that gave us the grip EXACTLY where we wanted it: MASSIVE GRIP on the brake and clutch pedals, and far less grip on the accelerator to allow the right foot to better slide/move during heal-toe braking. This set surpasses all others in this area, giving your BMW's foot operated controls a more tactile feel and response. The brake and clutch pedals feature pyramid shaped spikes, which actually BITE the soles of your shoes PERFECTLY, creating the ultimate (and unbeatable) friction surface.

These pedals are 100% MADE IN THE USA, and are CNC machined from aircraft quality aluminum billet to perfectly fit your BMW. There's no rubber to wear out, and no cosmetic finishes to chip or flake off. Stainless steel hardware is included, as well as a basic installation guide (professional installation always recommended). These pedals are for left-hand drive (LHD), manual transmission BMWs only (including SMG and DCT sequential manual gearboxes -- on these cars, you will only use one of the included clutch/brake sized pedals).

Now available in (optional) black anodized! The same shoe-gripping performance as our standard "naked" aluminum racing pedals, but with an added black anodized coating, for a stealth black finish. We always recommend the naked metal pedals for harsher/race type use, as all cosmetic finishes will eventually degrade over time. But for those looking for the black-out look, we can now accommodate! To add this option, simply choose your selection below.

 


Genuine BMW Led Interior Light Package - Set of 10
Genuine BMW - Corporate Logo
T#:21352
Part#: 63122212788
In Stock
14% off MSRP $171.00
$146.52
Free Shipping
14% off MSRP $171.00
$146.52
Free Shipping
These original BMW LED lights cover anything from a reading light, a foot well light or even an under door light and are white in color. The daylight white light colour conveys a modern ambience and pleasant brightness. A specially calibrated lens creates a radiance comparable to that of a light bulb. In addition to their bright white appearance, they offer ultra-low energy consumption, an extremely long service life and optimized brightness. Includes 10 LED modules - 6 for interior/reading light, and 4 for footwell and door lights. The LED module can be plugged directly into the existing socket. Replaces W3W, W5W and W6W lamps with T10 base.

Features
  • Attractive, high quality design
  • Bright white light
  • Extremely long service life
  • Ultra-low energy consumption
  • Customized look at an affordable price
  • Universal – can be used in almost any BMW
  • Proper testing and approval by BMW of North America

  • Dinan Automatic Transmission Alumnium Pedal Cover Set
    Dinan - Corporate Logo
    T#:389437
    Part#: D700-0001
    Direct Ship
    $189.52
    Free Shipping

    Stylish aluminum and rubber pedal pads add a great high performance look to the interior of your BMW, while providing plenty of grip for even slippery leather soles. The pedal pads feature the Dinan logo and come complete with hardware for a simple installation. Worth 1 point towards your Dinan badge.

    For cars with automatic transmission.

    Seatbelt 3-point Receptacle - Macht Schnell
    Macht Schnell - Corporate Logo
    T#:338504
    Part#: 79.12.12X
    On Order, ETA May 24, 2019
    Starting at $125.00
    Free Shipping
    Starting at $125.00
    Free Shipping
    Adding seats and keeping your stock 3-point belt? You're going to need this set of brackets to attach the old belt receptacle to the new floor mount. Nearly all BMW seats have the inboard belt buckle attached to the seat. So you will need to remove that buckle and transfer it to your new floor bracket. If you're using the Macht Schnell floor brackets these plates mount in between the sliders and seat. They are made from thick steel then powedercoated in stealthy black. These are sold as a pair to fit one seat and the Macht Schnell floor mounts (may require modification for use on other brand floor mounts). Fits most coupe or sedan models from 1992-2012, including E36, E46, E82, E9X, and Z4 models.

    Sold per seat.

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i 1M Coupe
    1992-1998 E36 BMW 318i 318is 318ti 323is 325i 325is 328i 328is M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 (not convertibles)
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

    EVO Series Digital Water Temperature Gauge - 80-280°F
    Prosport Performance - Corporate Logo
    T#:389633
    Part#: 216EVOWT.F
    In Stock
    $60.00
    $60.00

    The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

    Kit Includes:

    • Digital Water Temperature Guage (80-280 degrees) 
    • Instructions
    • Mounting hardware
    • Decals
    • Temperature sender - 1" long with 1/8" NPT threads
    • Dual color display (Blue or red)
    H3R Performance HalGuard™ Clean Agent 2.5lb Fire Extinguisher - Black
    H3R Performance - Corporate Logo
    T#:402686
    Part#: HG250B
    In Stock
    $224.95
    Free Shipping

    Track days can come to an abrupt ending when dealing with a vehicle fire. Causes can range from flammable fluids, such as leaking fuel, or overheating electronics and electrical shorts. Regardless of the cause, this can cause thousands of dollars of damage and can potentially become an immediate, life-threatening hazard if not properly handled. The best way to ensure your safety is to have a fire extinguisher on board that is made to put out any fires quickly and efficiently. You must also be certain that it is reliable enough to get the job done in an emergency. H3R Performance builds high quality extinguishers that feature strong steel cylinders, all metal valve construction, and aviation-quality steel mounting brackets all to make certain that this life saving device will function perfectly, without the worries of weak plastic valves or internals.

    The HalGuard™ Clean Agent Extinguisher was specifically designed to combat fires in situations and places that water would only make worse, such as a fuel fire or electrical fires. These extinguishers contain Halotron® 1, an electrically non-conductive "clean" extinguisher that rapidly turns into gas and leaves behind no damaging residue that would need to be cleaned up and is environmentally friendly. Thanks to its liquid to gas evaporation, it can get in to hard to reach areas to properly extinguish any and all fire sources. It has also be extensively tested by the military and FAA for its fire fighting ability and is now the main extinguisher used at airports around the world.

    Features:

    • No thermal shock to electronics
    • No mess or damage to vehicle or surfaces
    • Liquefied gas extinguishes hard-to-reach fires
    • Does not impair operator's vision
    • EPA approved
    • Listed and rated 2B:C by Underwriters Laboratories
    • Rechargeable
    • Made in U.S.A.
    • 2-strap mounting bracket
    • 6' - 10' discharge range
    • High quality steel cylinders
    • All metal valve construction
    • Compact, lightweight, easy to use
    • Five year limited warranty

    Specifications:

    • Extinguishing Agent  --  Halotron® 1
    • Agent (lb.)  --  2.5
    • Gross Weight (lb.)  --  5.4
    • U/L Rating  --  2 B:C
    • Height (inches)  --  14.8
    • Width (inches)  --  5.0
    • Depth-diameter (inches)  --  3.0

    Rennline Steering Wheel Quick Disconnect - Black
    Rennline - Corporate Logo
    T#:557127
    Part#: I18BLACK
    In Stock
    $375.00
    $375.00

    Looking for the highest quality steering wheel quick release on the market? Well this is it. This hub has a tapered asymmetrical socket that eliminates chances of looseness as the hub breaks in, a feature not normally found on competitor's quick disconnects. Also, Rennline Quick Releases are equipped with spring loaded roll pins that allow for seamless one hand removal, which is essential for emergency situations. 

    All components are machined from anodized 7075 aircraft grade aluminum. The mounting plates are designed to work with all standard 6-bolt mounting patterns used by steering wheel manufacturers such as OMP, Momo, Sparco, and Renown.

    This unit measures 2.3" tall.

    Installation instruction HERE


    VDO Head Unit - USB, Aux Input, and CD
    VDO - Corporate Logo
    T#:397086
    Part#: CD7416U-OR
    In Stock
    $199.95
    Free Shipping

    Tired of dealing with an old radio that has worn out buttons, a burnt out display, and/or no easy way to connect your audio device without putting in some ugly modern head unit? That's where this VDO Head Unit with USB, Auxiliary Input, and CD player comes in! The sleek but simple styling of this VDO head unit is designed with a stock-style appearance, helping to retain a period correct look but with all the modern features that make this unit an amazing product.

    Key Features:

    • MP3 compatible head unit  
    • USB port
    • AUX input
    • CD player
    • Shallow installation for maximum clearance behind the unit
    • Wiring harness CA0504U-LS sold separately 

    *Please note this is a aftermarket head unit and may require custom mounting, wiring or surrounds, professional installation is recommended*

    CAE Ultra Shifter
    CAE - Corporate Logo
    T#:402143
    Part#: 10023BMWC
    Direct Ship
    Starting at $979.00
    Starting at $979.00

    Everyone who tracks their BMW knows the shifter is a bit of a compromise. On the street and around town it might be described as smooth and sweet. But on the track the same engineering that makes shifting effortless becomes a liability. It's all too easy to put your BMW into the wrong gear and over-rev the engine, resulting in the infamous mis-shift (or money$hift). Short shift kits are not the solution - effort and notchiness go up but it's still easy to grab the wrong gear. The CAE shifter IS the answer, however.

    The CAE shift kit is the real deal as far as motorsport shift levers is concerned. It's function over form. The real engineering is inside the shifter housing. A spring pre-loads the shift linkage so shifts are much faster. There is no slop or play in the shift lever and the shift gate is much smaller than the factory setup so there's no wasted motion. Even the best BMW short shift kits will feel vague and sloppy after trying the CAE. Over-engineered? Nope it's just the German way. Check out the CAE shifter's long list of attributes -
     

    video: CAE Ultra Shifter

     

    • Universal kit for vehicles with 5 and 6 speed Getrag and ZF transmissions.
    • Short and super-precise shifting travel in the traditional H-pattern.
    • The BMW linkage to the transmission remains unchanged.
    • Racing-style appearance.
    • Ergonomics optimized for fast road/motorsports:
      + positioning of the shift lever close to the steering wheel
      + narrow shift pattern/gate reduces wasted motion in between gears
      + reverse lock-out cable (accidental changing to the reverse gear is impossible). The reverse gear is unlocked by pulling up the sliding collar on the shift lever.
    • Low weight and high stability: CNC and laser-cut aluminum alloy with a durable brushed finish.
    • Stable shifting platform that eliminates the stock shifter carrier that is so susceptible to flex and deflection.
    • Integrated center position spring, ensuring perfect feedback when shifting up and down.
    • Right/left stops and reverse gear stop adjustable separately.
    • Complete kit for adaption to BMW selector rod with all small parts, fastening material, and detailed installation instructions.
    • Shifter is intended for vehicles without interior equipment or without a center console. Modification of existing interior panels required if using a stock center console.
    • Optionally available in all black anodized (please ask for delivery period). All shifters with anodized aluminium gear lever knob in the following colors: titanium grey (standard), blue, red, black, silver or orange.
    • Total height: approx. 400 mm (15.75")
      Total length: approx. 180 mm (7.09")
      Dimensions of base plate:approx. 150 x 125 mm (5.9x4.9")
      Shifting travel:approx. 65 mm (2.56")
      Selector travel (transverse direction):approx. 65 mm (2.56")
      Weight (complete):approx. 1,05 kg (2.3lbs)
      Offset of the gear lever knop (back/up):depending on vehicle type approx. 50 / 170 mm

      But don't take our word for it, read what others have been saying:
      "The stock shifter is a POS after driving with the CAE. The CAE shifter isn't your average aftermarket shifter. If you've never used one, you have no idea." - M3post user.
      "You aren't really switching to the CAE for faster shifts per say. You switch for a more responsive and better feeling shifter that's also much closer to your hands on the wheel. It's a fantastic mod and I love mine." - M3post user.

    We stock many of the more popular option combinations of these - some may be special order from CAE and as they are manufactured in Germany, an additional lead time of 3-6 weeks is possible on these items.

    EVO Series Digital Oil Temperature Gauge - 100-300°F
    Prosport Performance - Corporate Logo
    T#:389634
    Part#: 216EVOOT.F
    On Order, ETA May 21, 2019
    $60.00
    $60.00

    The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

    Kit Includes:

    • Digital Oil Temperature Guage (100-300 degrees) 
    • Instructions
    • Mounting hardware
    • Decals
    • Temperature sender - 1" long with 1/8" NPT threads
    • Dual color display (Blue or Red)


    Brey-Krause Quick Release Fire Extinguisher Mount - 3"
    Brey-Krause - Corporate Logo
    T#:396272
    Part#: R-9520
    Ships in 3 Business Days
    $241.50
    Free Shipping

    The Brey-Krause "Quick Release" Fire Extinguisher Mount is exquisitely CNC machined from T6 6061 billet aluminum and clear anodized for durability. The part design allows the fire extinguisher to be released from the bracket with one hand when time is of the essence. The bracket attaches to all existing fire extinguisher mounts and includes stainless steel hardware. 

    Mount holds any 3" fire extinguisher