Turner Motorsport for BMW E10 2002tii M15 2.0L

Clear BMW chassis

Turner Motorsport 12x1.5 Bullet Nose Wheel Stud - Most BMWs 1984-2011 (E30, E36, E46, E9X)
Turner Motorsport - Corporate Logo
T#:340499
Part#: TWH9950
In Stock
Starting at $102.95
Free Shipping
Starting at $102.95
Free Shipping
As used on the Lime Rock M3 Made in the USA
  • 75MM OR 90MM OVERALL LENGTH
  • EASY INSTALL WITH ALLEN SOCKET
  • BLACK M-PHOSPHATE COATING
  • CORRECT SHOULDER SIZE FOR HUBS/BRAKE ROTORS
  • STUD FOR MIXED STREET/TRACK USE

Wheel studs are among the safest and most beneficial upgrades you can make on a track car. Not only are wheel studs safer than wheel bolts but they make changing wheels/tires much easier. One of the frustrating things about installing your wheels on the hub is that it's difficult to line up the wheel on the bolt holes. As wheels get larger but also heavier it's even more trouble. Add in a wheel spacer and the task is twice as hard. BMW does produce a wheel alignment pin for this purpose but if you're changing wheels often a stud conversion is the better way to go.

Our original bullet nose studs are available in 75mm and 90mm overall lengths. The 75mm works great for cars that do not use a spacer (or a spacer smaller than 10mm). We recommend the 90mm length for cars that have a spacer larger than 10mm. These studs come with a black magnesium phosphate coating for excellent corrosion resistance. These studs are perfect for dual-purpose street/track cars. The studs are stronger and safer than wheel bolts and have a barrier against corrosion which makes them suitable for street use. For a dedicated race or track car, where wheel changes or pit stops are more frequent, check out our racing dry lube studs.

Our studs are also designed and manufactured with the properly sized shank to work with a wider range of BMW wheel, nut, and brake rotor combinations. We intentionally avoid the extra large shoulders you see on other studs because they can interfere with some brake rotor hats. The extra large shoulder can be too large to allow the rotor to pass through and drilling out the holes is required (not cool!) Our studs have the sufficient shank for the brake rotor without interfering.

Not all wheel studs are created equal. We don't take a manufacturer's generic wheel stud from their catalog and call it our own. Turner Wheel Studs are manufactured to meet our own specifications. Beware of cheaper studs on the market! We have seen other studs similar to our own designs that are not a true BMW fitment. There are differences that we have ironed out over our years of selling wheel studs for the BMW market. Our stud prices may be slightly higher than the rock bottom prices on the web but we promise that it's a higher quality.

FREE red threadlocker with purchase of a full set of wheel studs (16 or more)
Turner Bullet Nose Wheel Stud Features:
  • Black phosphorous corrosion resistant coating
  • Innovative nut-starter and bullet shape radius that all but eliminates cross-threading
  • Long shank for good brake rotor alignment
  • Heat-treated aircraft quality alloy steel
    Installation Instructions
    Click here for installation instructions and more information.



    Sold per stud.
  • Turner Motorsport Brake Bleeder Bottle with Check Valve - Simple Bleed
    Turner Motorsport - Corporate Logo
    T#:176959
    Part#: BBMCV
    In Stock
    $22.95
    Free Shipping on orders $99 and up
    This is the new evolution of our popular Brake Bleeder Bottle. The latest design features a one-way check valve inside the bottle that is operated when you pump the brakes. This is a more economical and simpler system than other "1 man bleeding" kits - no modification to your brake system and you only have to buy the one bottle. The newest bottles also include upgraded caps and fittings for a tighter seal.

    The one-way check valve is extremely simple to use - attach the bottle and hose, open your bleed screw, and pump your brakes from the pedal. The check valve opens with each pump to let fluid and air out of the system and then seals tight when the pedal is released. The bottle uses a large magnet to conveniently stick to your brake disc while you run the hose to the caliper.

    Works on just about all brake systems so no need to have specialized adapters or bleed screws.
    Carbon Fiber Roundel Emblem Decal Set - Hood/Trunk/Wheels/Steering Wheel
    Turner Motorsport - Corporate Logo
    T#:338604
    Part#: TMS20551
    In Stock
    Starting at $30.95
    Free Shipping on orders $99 and up
    Help your BMW stand out from the crowd with our colored Roundel emblem covers. Whether you are looking to match your paint color, hightlight your interest in motorsports, or freshen the look of your car, Roundel decals offer a great way to personalize your BMW. These easy to install vinyl decals adhere over the existing Roundel emblems. The kit includes colored quadrants to cover the hood emblem, trunk emblem, steering wheel and 4 wheel emblems - and fender emblems for Z3 and Z4. These are made to withstand all weather conditions and are removed with ease if required.

    Currently we offer the following carbon fibre style roundel stickers: Printed Carbon Fiber - Black, Dynamic Carbon Fiber - Silver. Sorry, Dynamic Carbon Red, Dynamic Carbon Black, and Dynamic Black/Silver are no longer available.

    Note: These are vinyl overlays for the existing roundels. Actual roundel emblems are not included. We have BMW Roundel emblems available here.

    This item fits the following BMWs:
    These emblem covers fit all BMW years and models including:
    E30, E36, E46, E90, E92, E34, E39, E60, F10, E63, E38, E65, F01, X3, X5, X6, Z3, Z4 and more.

    Stealth Bulb Set - Dual Filament Front for Most BMW Models up to 2001
    Turner Motorsport - Corporate Logo
    T#:1070
    Part#: TMS1070
    In Stock
    $30.95
    Free Shipping on orders $99 and up
    Stealth Bulb Set - Dual Filament Front for Most BMW Models up to 2001. These are the are the best concealment bulbs on the market; invisible in clear lenses when off and bright amber when on. No more ugly orange egg yolk look in your clear corners. Check your stock bulb and compare to photo before ordering.

    Turner Baffled Oil Catch Can Kit - 10oz
    Turner Motorsport - Corporate Logo
    T#:398786
    Part#: 022798TMS01-09KT
    In Stock
    $189.95
    Free Shipping

    When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

    Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain system comes complete with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

    *Click here for instructions*

    Features:

    • 6061-T6 billet machined body, anodized black for lasting protection and appearance
    • Strategically positioned 4 chamber baffle system maximizes oil / air separation 
    • Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
    • Sealed with a pre-installed viton O-Ring
    • Includes 2.5mm allen key to remove baffle plates for cleaning
    • Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
    • Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
    • Optional use drain hole - drain kit included!
    • Universal mounting kit
    Turner Motorsport Windshield Banner
    Turner Motorsport - Corporate Logo
    T#:340480
    Part#: TMS11530
    In Stock
    Starting at $30.95
    Free Shipping on orders $99 and up
    Show your support for Turner Motorsport by placing this banner at the top of your windshield. This 8" x 60" banner fits all BMW's (some trimming is required). Great for racecars, track cars, or your high performance street car. Due to the wide variety of cars and sizes of windshields banners do require some trimming to fit correctly. Banners are shipped as a 8" x 60" sheet.

    Turner Motorsport vinyl graphics are made from high performance cast graphic film, which has superior resistance to sunlight and adhesive longevity. The Turner Motorsport Logo is printed in super high quality vinyl inks giving the banner a professional look. We currently offer the Turner Motorsport logo in either white or silver, with gloss black trim on a matte black background. Just like the ones on our Turner Motorsport Project Cars!

    Think Turner Motorsport should sponsor your car?
    Send us some pictures and a short description of why you think your car (race car, track car, or street car) needs one of these banners for FREE and we will send you one at no charge. Send your pictures and info to  partnerships@turnermotorsport.com  and tell us why your car should have a Turner banner! Requests must be sent by email in writing. Please do not request over the phone.

    Turner Motorsport Short Sleeve T-Shirt - Black
    Turner Motorsport - Corporate Logo
    T#:558138
    Part#: TMSTSHIRTBLK
    In Stock
    Starting at $26.95
    Free Shipping
    Starting at $26.95
    Free Shipping

    Like what we do? We hope so. Purchase a Turner Motorsport T-Shirt today and add the Turner colors to your regular t-shirt rotation.

    These shirts are premium, New-Era tees - we wouldn't want you to be uncomfortable while sporting the Turner logo.

    Available in Black, Grey, and Blue. Don't see your size available? Give us a call at 1.800.280.6966 - we have you covered.

    Stealth Bulb Set -Single Filament Front/ Rear for BMW with Offset Pins
    Turner Motorsport - Corporate Logo
    T#:3658
    Part#: TMS3658
    In Stock
    $30.95
    Free Shipping on orders $99 and up
    Stealth Bulb Set -Single Filament Front & Rear for BMW with Offset Pins. These are the are the best concealment bulbs on the market; invisible in clear lenses when off and bright amber when on. No more ugly orange egg yolk look in your clear corners. Check your stock bulb and compare to photo before ordering.

    Limited Edition #96 Turner Motorsport M6 GT3 Minichamps - 1 Of 402
    Turner Motorsport - Corporate Logo
    T#:392592
    Part#: 96M6GTSMINICHAMP
    In Stock
    Sale - Save 10% $86.95
    $78.26
    Free Shipping
    Sale - Save 10% $86.95
    $78.26
    Free Shipping

    Turner Motorsport was created with the vision of bringing ultra high performance BMW accessories to avid enthusiasts at a reasonable price. Will Turner opened the doors to his 6500 square foot R&D facility in 1993 - since then the company has seen incredible growth and accomplishment. Most recently, Turner Motorsport participated in the IMSA United Sportscar Championship. Drivers Jesse Krohn and Jens Klingman were able to pilot the Number 96 Turner Motorsport M6 GT3 through the pack and finish fourth overall during the 2017 season.

        While not on the racetrack, the team at Turner can be found designing and testing new products perform just as well on the track as they do on the street. For example, Turner’s E46 rear subframe reinforcement kit resolves a real world problem, the E46’s rear subframe mounting points, by creating a solution that prevents further damage and can be used to remedy and already cracked subframe area. In this way, an extremely detrimental problem can be repaired or prevented no matter what type of driving style the vehicle endures. This is just one example of the philosophy behind Turner Motorsport being put to work in every product they design.

        When it comes to sourcing elusive motorsport specific parts, Turner delivers again. As an authorized dealer, Turner carries a wide range of racing specific parts from BMW Motorsport. Anything from full conversions, such as the M235iR conversion kit, to the more esoteric offerings like the E30 M3 Evo racing pulley kit.

        Now you can bring home a piece of Turner Motorsport History with this beautifully constructed diecast model of the Turner M6 GTD car. This is the same one driven by Jens Klingman and Bret Curtis at Circuit of the Americas in the 2016 season. Accurate and breathtaking detail are at the forefront of this limited edition 1/43 scale model. Only 402 are left so get yours before the checkered flag drops!

     

     


    Turner Motorsport Short Sleeve T-Shirt - Blue
    Turner Motorsport - Corporate Logo
    T#:558139
    Part#: TMSTSHIRTBLU
    In Stock
    Starting at $26.95
    Free Shipping
    Starting at $26.95
    Free Shipping

    Like what we do? We hope so. Purchase a Turner Motorsport T-Shirt today and add the Turner colors to your regular t-shirt rotation.

    These shirts are premium, New-Era tees - we wouldn't want you to be uncomfortable while sporting the Turner logo.

    Available in BlackGrey, and Blue. Don't see your size available? Give us a call at 1.800.280.6966 - we have you covered.

    Turner Baffled Oil Catch Can Kit - 8oz
    Turner Motorsport - Corporate Logo
    T#:398784
    Part#: 022798TMS01-07KT
    In Stock
    $189.95
    Free Shipping

    When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

    Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain system comes complete with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

    *Click here for instructions*

    Features:

    • 6061-T6 billet machined body, anodized black for lasting protection and appearance
    • Strategically positioned 4 chamber baffle system maximizes oil / air separation 
    • Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
    • Sealed with a pre-installed viton O-Ring
    • Includes 2.5mm allen key to remove baffle plates for cleaning
    • Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
    • Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
    • Optional use drain hole - drain kit included!
    • Universal mounting kit
    Turner Motorsport Racing Aluminum Pedal Set for Manual Transmission
    Turner Motorsport - Corporate Logo
    T#:339007
    Part#: TMS339007
    In Stock
    Starting at $112.95
    Free Shipping
    Starting at $112.95
    Free Shipping

    These aluminum pedals were designed with one thing in mind -- performance. We wanted a pedal set that gave us the grip EXACTLY where we wanted it: MASSIVE GRIP on the brake and clutch pedals, and far less grip on the accelerator to allow the right foot to better slide/move during heal-toe braking. This set surpasses all others in this area, giving your BMW's foot operated controls a more tactile feel and response. The brake and clutch pedals feature pyramid shaped spikes, which actually BITE the soles