BMW Engine Parts for BMW E10 2002tii M15 2.0L

Clear BMW chassis
Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Rear Main Engine Seal - M54 S38 S54 M20 M30 M50 M52
Genuine BMW - Corporate Logo
T#:615
Part#: 11142249533
In Stock
25% off MSRP $44.18
$32.99
Free Shipping on orders $99 and up
25% off MSRP $44.18
$32.99
Free Shipping on orders $99 and up
This Genuine BMW updated rear main seal fits many BMW's. It is less likely to leak under "extreme" conditions. The E30 M3 tends to leak from the rear main seal.
When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
1970-1976 2002 BMW 1600 2002 2002tii
1977-1983 E21 BMW 320i 323i
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 535i M5
1997-2003 E39 BMW 525i 528i 530i
1982-1989 E24 BMW 633csi 635csi M6
1981-1987 E23 BMW 733i 735i
2004-2006 E83 BMW X3 2.5i X3 3.0i
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Roadster
2003-2006 Z4 BMW Z4 2.5i Z4 3.0i
2006-2008 Z4 BMW Z4 M Roadster M Coupe
BMW Oil Cap Crankcase Breather - All BMW w/2 prong oil fill cap
Vargas Turbo Technologies - Corporate Logo
T#:558084
Part#: VTT-CRANK-BREATH
In Stock
$99.00
Free Shipping on orders $99 and up

VTT is happy to introduce the first and only available plug and play crankcase breather kits for ALL BMW applications that use the two-prong oil tab style oil fill caps. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay.

Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups for the ultimate in crankcase pressure relieve 

Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase.

This breather will fit:
 ALL BMW's with the two-prong style oil fill cap including but not limited to N54, N55, S55, S54

NOTE: NOT ALL THE MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES, AND WHICH WILL NOT AS WE HAVE NOT TEST IT ON ALL MODELS. IF YOU ARE ORDERING THE BREATHER FOR ANYTHING OTHER THAN AN N54 TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.

MODEL LIST OF REPORTED CLEARANCE ISSUES: N55 E/F 3 SERIES

Turner Baffled Oil Catch Can Kit - 10oz
Turner Motorsport - Corporate Logo
T#:398786
Part#: 022798TMS01-09KT
In Stock
$189.95
Free Shipping

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain system comes complete with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

*Click here for instructions*

Features:

  • 6061-T6 billet machined body, anodized black for lasting protection and appearance
  • Strategically positioned 4 chamber baffle system maximizes oil / air separation 
  • Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
  • Sealed with a pre-installed viton O-Ring
  • Includes 2.5mm allen key to remove baffle plates for cleaning
  • Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
  • Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
  • Optional use drain hole - drain kit included!
  • Universal mounting kit

Turner Baffled Oil Catch Can Kit - 8oz
Turner Motorsport - Corporate Logo
T#:398784
Part#: 022798TMS01-07KT
In Stock
$189.95
Free Shipping

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain system comes complete with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

*Click here for instructions*

Features:

  • 6061-T6 billet machined body, anodized black for lasting protection and appearance
  • Strategically positioned 4 chamber baffle system maximizes oil / air separation 
  • Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
  • Sealed with a pre-installed viton O-Ring
  • Includes 2.5mm allen key to remove baffle plates for cleaning
  • Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
  • Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
  • Optional use drain hole - drain kit included!
  • Universal mounting kit

Turner Baffled Oil Catch Can Kit - 6oz
Turner Motorsport - Corporate Logo
T#:398782
Part#: 022798TMS01-05KT
In Stock
$189.95
Free Shipping

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain system comes complete with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

*Click here for instructions*

Features:

  • 6061-T6 billet machined body, anodized black for lasting protection and appearance
  • Strategically positioned 4 chamber baffle system maximizes oil / air separation 
  • Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
  • Sealed with a pre-installed viton O-Ring
  • Includes 2.5mm allen key to remove baffle plates for cleaning
  • Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
  • Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
  • Optional use drain hole - drain kit included!
  • Universal mounting kit
Schwaben 9 Piece Scraper, Hook And Pick Set
Schwaben - Corporate Logo
T#:379006
Part#: 008504SCH01A
In Stock
$25.95
Free Shipping on orders $99 and up

Some of the most popular  uses are carbon cleaning/scraping, picking out o-rings, snap rings and clips.This kit features large and small picks, hooks and a 1" wide scraper. This 9pc set should be part of everyone's tool assortment.

Features:

  •  3" Blade MINI Awl, 90°, Hook, and Curve
  • 6" Blade Awl, 90°, Hook, and Curve
  •  6" x 1" wide scraper

Braille Performance Lightweight Advanced AGM Battery - B2015 - 15lbs
Braille - Corporate Logo
T#:558038
Part#: B2015
Direct Ship
$199.99
$199.99

When building a car for the track, one of the most important factors to consider is weight. Stock batteries can weigh up to almost 50 pounds and are unnecessarily large, designed to power a host of systems not normally used in a track car (radios, lighting, etc.). What can you do to cut weight the weight without affecting your cars operation? This is where Braille Battery comes in with their long line of performance lightweight battery options! Designed to provide the highest cranking power possible while being up to 75% lighter, Braille Battery is one of the foremost leaders in automotive racing batteries with nothing but high quality, high output batteries in mind!

The B2015 is Braille's most popular non-carbon racing battery and is able to start larger engines easily for racing and offers daily driving capability for most 4 and 6 cylinders engine vehicles.

Physical Specifications:

  • BCI Group: All sizes
  • Weight: 15lbs / 6.8kg
  • Length: 6.8" / 173mm
  • Width: 3.4" / 86mm
  • Height: 6.1" / 155mm
  • Polarity: Right Side Positive

Performance Specifications:

  • Voltage:  12
  • Full Charge Voltage:  13.2
  • Pulse Cranking Amps (PCA):  1067
  • Amp Hour (AH): 21
  • Life Cycle @ 10% DOD:  3100

*THIS BATTERY REQUIRES A CUSTOM MOUNTING SOLUTION. The size and wight are significantly smaller than a stock battery and will not be held in place by the stock battery mount*

Braille Performance Lightweight Advanced AGM Battery - B3121 - 21lbs
Braille - Corporate Logo
T#:558042
Part#: B3121
Direct Ship
$229.99
$229.99

When building a car for the track, one of the most important factors to consider is weight. Stock batteries can weigh up to almost 50 pounds and are unnecessarily large, designed to power a host of systems not normally used in a track car (radios, lighting, etc.). What can you do to cut weight the weight without affecting your cars operation? This is where Braille Battery comes in with their long line of performance lightweight battery options! Designed to provide the highest cranking power possible while being up to 75% lighter, Braille Battery is one of the foremost leaders in automotive racing batteries with nothing but high quality, high output batteries in mind!

The B3121 battery from Braille is their lightest do everything battery available, offering 1380 pulse cranking amps that can crank over V8 engines with ease while still coming in at under 22 pounds, half of the weight of a standard Group 34 battery! This is thanks to their Advanced AGM racing technology that allows them to put a ton of power into a very small package.

Physical Specifications:

  • BCI Group: All sizes
  • Weight: 21lbs / 9.5kg
  • Length: 6.6" / 168mm
  • Width: 5.2" / 132mm
  • Height: 6.8" / 173mm
  • Polarity: Right Side Positive

Performance Specifications:

  • Voltage:  12
  • Full Charge Voltage:  13.2
  • Pulse Cranking Amps (PCA):  1380
  • Amp Hour (AH): 31
  • Life Cycle @ 10% DOD:  3100

*THIS BATTERY REQUIRES A CUSTOM MOUNTING SOLUTION. The size and wight are significantly smaller than a stock battery and will not be held in place by the stock battery mount*


Braille Performance GreenLite Lithium-ION Battery w/ Charger - G20 - 4.5lbs
Braille - Corporate Logo
T#:558045
Part#: G20C
Direct Ship
$574.99
$574.99

When building a car for the track, one of the most important factors to consider is weight. Stock batteries can weigh up to almost 50 pounds and are unnecessarily large, designed to power a host of systems not normally used in a track car (radios, lighting, etc.). What can you do to cut weight the weight without affecting your cars operation? This is where Braille Battery comes in with their long line of performance lightweight battery options! Designed to provide the highest cranking power possible while being up to 75% lighter, Braille Battery is one of the foremost leaders in automotive racing batteries with nothing but high quality, high output batteries in mind!

The G20 lithium battery from Braille is designed for small displacement 4 and 6 cylinder engine vehicles and is the smallest, lightest, most cost effective lithium upgrade on the market. Incorporated in this battery is the same technology used in their race winning batteries used by nearly every OEM developer in classes ranging from SCCA to Formula 1. The G20 battery has been used in the Pro Mazda cars in the Mazda Road to Indy series for the last 3 years and is still running strong, replacing the traditional PC680s that often failed to start hot rotary engines. This battery is the same size as the PC680, but is 1/3rd the weight and has double the cranking power!

This package include a charger for the battery that is specifically designed to charge the battery at the best rate to prevent potential damage from overcharging.

Why upgrade to lithium? 

Braille Lithium delivers a higher, cleaner voltage which improves the performance of every electrical component and has shown to provide:

  • Quicker starting (a full volt higher than lead and less voltage drop during cranking)
  • Improved engine management & data logging performance (more stable voltage)
  • Less horsepower draw from the alternator due to efficient charging (5 times faster than lead),
  • Lasts 3-5 times longer (especially under the harshest environments),
  • Much more reliable (less than 1% failure rate)
  • Significant weight savings. (up to 1/4 the weight)
  • Don’t self-discharge, so if the battery is disconnected (no draw or via power disconnect switch), they can sit for over a year and still have over 13 volts to start the vehicle.

To get all these benefits in one simple step makes it a very cost effective upgrade!!

Physical Specifications:

  • BCI Group: 20L
  • Weight: 4.5lbs / 2.04kg
  • Length: 7.1" / 180mm
  • Width: 2.98" / 76mm
  • Height: 6.25" / 159mm
  • Polarity: Right Side Positive

Performance Specifications:

  • Voltage:  12
  • Full Charge Voltage:  13.8
  • Pulse Cranking Amps (PCA):  697
  • Amp Hour (AH):  12
  • Lithium Amp Hour/Lead-Acid Equivalent (LAH/PbEq):  36
  • Reserve Capacity (RC):  28

*Due to low capacity of this lightweight battery, if the vehicle is not driven on a regular basis, a lithium charger must be used to keep the battery fully charged or a power disconnect switch used to keep the battery from being drawn down. Do not use a standard lead charger on a lithium battery.

*THIS BATTERY REQUIRES A CUSTOM MOUNTING SOLUTION. The size and wight are significantly smaller than a stock battery and will not be held in place by the stock battery mount*

When installing a lithium battery in a BMW that requires the battery to be coded in, Braille recommends setting the battery code to the lowest/smallest AGM battery setting possible.


Schwaben Bosch Alternator Tool Kit - 13 Pieces
Schwaben - Corporate Logo
T#:367481
Part#: BTA-13PCS
In Stock
$50.95
Free Shipping on orders $99 and up

This tool is perfect for making alternator work easy, just another example of having the right tool for the job.

Features:

  • 13-piece alternator tool kit removes and installs Overrunning Alternator Decouplers (OADs) on most alternators 
  • Unlike solid drive pulleys, OADs have an internal overrunning clutch, and require special tools for removal and installation, which is important when a remanufactured alternator shows up with no pulley installed
  • Schwaben has assembled the tools you need for this job in a convenient blow molded case.
8mm Performance Spark Plug Wire Set - 2002
Ireland Engineering - Corporate Logo
T#:558462
Part#: 02WIRES8
Direct Ship
New Item
$57.00
$57.00

These custom-built 8mm competition spark plug wires from Ireland Engineering are designed to deliver the most consistent, hottest possible spark.

Fits the Following BMWs:

2002

Silicone Coolant Hose Kit - 2002 With Sidedrafts
Ireland Engineering - Corporate Logo
T#:558493
Part#: 02DCOECOOLANTKIT
Direct Ship
New Item
$145.00
$145.00

Unlike stock rubber hoses, which are prone to swell, crack, and break over time, silicone rubber will maintain its shape with superior heat resistance. these Ireland Engineering hoses are a great high performance upgrade for your BMW's cooling system.

Fits the Following BMWs:

2002 with sidedraft carburetors



7mm Ignition Wire Set - 1602/1800/2002/2002tii 1968-76, E21 320i 1977-79
Turner Motorsport - Corporate Logo
T#:4021
Part#: 12-7405
Direct Ship
$64.95
$64.95