BMW Wheels - Genuine & Performance for BMW E10 2002tii M15 2.0L

Clear BMW chassis
The wheels and stance often make the look of the car complete. If your factory alloys are missing center caps, curb-rashed beyond recognition, or have been damaged, we have your replacements all picked out. For a performance-oriented driver, aftermarket alloys shed weight and offer improved aesthetics over the factory options. Space out your stance with our selection of wheel spacers, completely change the look and feel of your BMW with forged or flow-formed aftermarket alloys, or replace old wheels with factory options.

Turner Motorsport 12x1.5 Bullet Nose Wheel Stud - Most BMWs 1984-2011 (E30, E36, E46, E9X)
Turner Motorsport - Corporate Logo
T#:340499
Part#: TWH9950
In Stock
Starting at $102.95
Free Shipping
Starting at $102.95
Free Shipping
As used on the Lime Rock M3 Made in the USA
  • 75MM OR 90MM OVERALL LENGTH
  • EASY INSTALL WITH ALLEN SOCKET
  • BLACK M-PHOSPHATE COATING
  • CORRECT SHOULDER SIZE FOR HUBS/BRAKE ROTORS
  • STUD FOR MIXED STREET/TRACK USE

Wheel studs are among the safest and most beneficial upgrades you can make on a track car. Not only are wheel studs safer than wheel bolts but they make changing wheels/tires much easier. One of the frustrating things about installing your wheels on the hub is that it's difficult to line up the wheel on the bolt holes. As wheels get larger but also heavier it's even more trouble. Add in a wheel spacer and the task is twice as hard. BMW does produce a wheel alignment pin for this purpose but if you're changing wheels often a stud conversion is the better way to go.

Our original bullet nose studs are available in 75mm and 90mm overall lengths. The 75mm works great for cars that do not use a spacer (or a spacer smaller than 10mm). We recommend the 90mm length for cars that have a spacer larger than 10mm. These studs come with a black magnesium phosphate coating for excellent corrosion resistance. These studs are perfect for dual-purpose street/track cars. The studs are stronger and safer than wheel bolts and have a barrier against corrosion which makes them suitable for street use. For a dedicated race or track car, where wheel changes or pit stops are more frequent, check out our racing dry lube studs.

Our studs are also designed and manufactured with the properly sized shank to work with a wider range of BMW wheel, nut, and brake rotor combinations. We intentionally avoid the extra large shoulders you see on other studs because they can interfere with some brake rotor hats. The extra large shoulder can be too large to allow the rotor to pass through and drilling out the holes is required (not cool!) Our studs have the sufficient shank for the brake rotor without interfering.

Not all wheel studs are created equal. We don't take a manufacturer's generic wheel stud from their catalog and call it our own. Turner Wheel Studs are manufactured to meet our own specifications. Beware of cheaper studs on the market! We have seen other studs similar to our own designs that are not a true BMW fitment. There are differences that we have ironed out over our years of selling wheel studs for the BMW market. Our stud prices may be slightly higher than the rock bottom prices on the web but we promise that it's a higher quality.

FREE red threadlocker with purchase of a full set of wheel studs (16 or more)
Turner Bullet Nose Wheel Stud Features:
  • Black phosphorous corrosion resistant coating
  • Innovative nut-starter and bullet shape radius that all but eliminates cross-threading
  • Long shank for good brake rotor alignment
  • Heat-treated aircraft quality alloy steel
    Installation Instructions
    Click here for installation instructions and more information.



    Sold per stud.
  • Carbon Fiber Roundel Emblem Decal Set - Hood/Trunk/Wheels/Steering Wheel
    Turner Motorsport - Corporate Logo
    T#:338604
    Part#: TMS20551
    In Stock
    Starting at $30.95
    Free Shipping on orders $99 and up
    Help your BMW stand out from the crowd with our colored Roundel emblem covers. Whether you are looking to match your paint color, hightlight your interest in motorsports, or freshen the look of your car, Roundel decals offer a great way to personalize your BMW. These easy to install vinyl decals adhere over the existing Roundel emblems. The kit includes colored quadrants to cover the hood emblem, trunk emblem, steering wheel and 4 wheel emblems - and fender emblems for Z3 and Z4. These are made to withstand all weather conditions and are removed with ease if required.

    Currently we offer the following carbon fibre style roundel stickers: Printed Carbon Fiber - Black, Dynamic Carbon Fiber - Silver. Sorry, Dynamic Carbon Red, Dynamic Carbon Black, and Dynamic Black/Silver are no longer available.

    Note: These are vinyl overlays for the existing roundels. Actual roundel emblems are not included. We have BMW Roundel emblems available here.

    This item fits the following BMWs:
    These emblem covers fit all BMW years and models including:
    E30, E36, E46, E90, E92, E34, E39, E60, F10, E63, E38, E65, F01, X3, X5, X6, Z3, Z4 and more.
    Schwaben Protecta Socket Kit - 3 Pieces
    Schwaben - Corporate Logo
    T#:385652
    Part#: PPS-1721
    In Stock
    $25.95
    Free Shipping on orders $99 and up

    Protecta socket are used to keep ugly scratch marks from showing up after torqueing down wheel lugs.

    Features:

    • Coated six-point deep-well impact sockets 
    • Color coded mar-free exterior coatings that prevent nicks and scratches left by plain metal sockets
    • 17mm, 19mm and 21mm Sockets included

    Use these with your breaker bar or impact gun to remove the tightest wheel bolts and lug nuts: when reinstalling wheels, use them to final torque wheel fasteners to factory specifications.

    Combine these with our torque limiting sockets and the Schwaben ½-inch torque wrench for a complete wheel fastener solution.


    Schwaben 1/2" Drive Torque Wrench - ft-lbs
    Schwaben - Corporate Logo
    T#:361842
    Part#: TW-12450
    In Stock
    $41.95
    Free Shipping on orders $99 and up

    Proper torque is very important when it comes to working on engines. The importance comes from proper sealing and to keep from damaging threads.

    Features:

    • Reversible ½-inch drive click-to-stop
    • Torque range of 10 to 150 ft-lb
    • Accurate to within +/-4%
    • 18 inches in length with a convenient carry case

    Wheel Spacer Test Fitment Kit
    ECS - Corporate Logo
    T#:388196
    Part#: 001202ECS03
    In Stock
    Starting at $138.95
    Free Shipping
    Starting at $138.95
    Free Shipping

    Unsure of what size spacer will work best for you? This professional kit includes 1mm, 2.5mm, 5mm, 10mm, and 15mm spacers with wheel studs and nuts for you play with. These are not the same spacers that we sell and they cannot be used to drive on. But with the studs installed the car can be lowered to the ground and rolled to check for clearances. These test fit spacers are drilled to fit the standard BMW 5x120 bolt pattern as well as 4-lug 4x100 (and VW/Audi bolt patterns too). You can stack spacers to achieve the perfect clearance. When you're ready call us to order the spacers you need (Turner spacers come in 3mm, 5mm, 7.5mm, 10mm, 12.5mm, 15mm, 17.5mm, 20mm, 25mm, and 30mm spacer thicknesses).

    These spacers are not for driving on. They lack the hubcentric lip that BMW wheels are designed to work with. Driving on studs alone will lead to a failure.

    Two ways to buy -

    • Own. Just as it says, you buy this kit to own. Perfect for shops or race teams that change wheels or brake components often. For shops you can measure wheel clearance and order the correct spacers the first time around (no wasting inventory or paying return shipping). Note: Kits purchased to Own are not returnable for refunds.
    • Rent. Pay the full price but get $110 as a store credit when you return the kit. We keep a modest $19.95 fee for the service. Perfect for DIY and enthusiasts who only need the Test Kit once. Use your store credit to purchase your spacers (or anything else from our catalog).

     

    Wheel Spacer FAQ:
    How to measure for wheel spacers
    Wheel spacer encyclopedia

     

    BMW M Mobility Kit - Emergency Tire Repair and Air Compressor Kit
    Genuine BMW - Corporate Logo
    T#:1872
    Part#: 71102333674
    In Stock
    $143.69
    Free Shipping on orders $99 and up
    This is the second generation "M Mobility Kit" from BMW. Unlike the older, more expensive kit, the tire sealant and air compressor of this can be used separately, meaning the air compressor can be used for occasion inflation (without needing to pump in sealant fluid). This kit is an absolute MUST HAVE on all newer BMW's that have no spare tire. It can also be a life-saver on any other BMW, even if you have run fun flats or a spare tire.

    The kit consists of a convenient zip-up nylon storage bag which contains a portable 12 volt DC air compressor (with pressure gauge), one bottle of tire puncture repairing sealant gel, universal compressor adapters, valve stem removal tool, one pair of stretch-fit black gloves to keep your hands clean, and an instruction manual to guide you through the process of performance a roadside tire repair on your BMW. And it stows neatly in your trunk until needed. We keep one of these kits in all of our BMWs, and think you should too. Replaces part number 71100413439.

    Wheel Pin Tool for Changing Wheels or Measuring Spacers
    Genuine BMW - Corporate Logo
    T#:1977
    Part#: 71111093774
    On Order, ETA May 21, 2019
    $30.15
    Free Shipping on orders $99 and up
    This old-fashioned tool serves a number of purposes - A) It's a must-have for changing wheels. B) It's also useful for mocking a wheel on the hub to measure for spacer thickness. It's inserted into one of the bolt holes by hand and easily slides out when done.

    A) This wheel pin (wheel stud) makes changing wheels a snap. When it's pressed into the wheel hub, the new wheel slides right over it and each bolt hole lines up perfectly. No more wrangling with a wheel/tire to get the bolts to line up! After installing your other wheel bolts, slide this out of the wheel and replace it with the last wheel bolt. We love this tool over all others because it's so easy to use. This tool slides into the bolt hole - it's not threaded so there's no danger of cross-threading or damaging the threads inside. And it's not affected by rust or other contaminants. Most BMW tool kits come with this tool already so it's easy to store and every BMW mechanic will be familiar with it.

    B) If you're trying to figure out what size spacer to use this tool can make things easier. With the pin pressed in to the hub you can then slide M12 washers over it to mimic the thickness of a spacer. The extra length of this pin allows you to slide the wheel back/forth to set the positon of the wheel. Measure the thickness of your washers and that's your spacer size! For this procedure, it's recommended that you have 2 of these pins so the wheel does not rotate out of position.
    Schwaben Tire Stack Cover
    Schwaben - Corporate Logo
    T#:384687
    Part#: 016757SCH01A
    In Stock
    $25.95
    Free Shipping on orders $99 and up

    This tire stack by Schwaben is the solution to keeping your tires and wheels clean while in storage.

    Features:

    • Works with 4 tire stacks and works great with our Schwaben Wheel Tree
    • Fitted with a long 29" zipper up the side for easy installation and removal
    • Nylon draw string at the bottom allows for a good snug fit
    • Durable 150D coated material is rated for outdoor use
    • Includes a handy storage pouch if not in use
    • Cover is a large 32" wide X 46" tall

    Wall-Mounted Wheel & Tire Storage Rack
    Schwaben - Corporate Logo
    T#:366968
    Part#: 003638SCH01A
    In Stock
    $61.95
    Free Shipping

    As any mechanic either at home or in a shop knows, there is rarely enough usable floor space. At least with a wall mounted tire rack you can count on the spare tires to be out of your way. Space is not the only factor for choosing a wheel storage product like this, most people don't realize that a concrete floor actually draws moisture leaving your tires to dryout even faster.


    Features:

    • Adjustable links allow you to store any size from 12" wheels to 19" wheels with tires
    • Folds flat against the wall when not in use to maximize your usable space
    • Supports up to 250 lbs and weighing in at only 20 lbs itself
    • 46" wide storage area (holds up to four 11½" wide tires)
    • Sturdy steel construction
    • Mounting holes spaced 48" apart for mounting to standard center studs

    ECS Tuning Wheel Spacers - 10.5mm - 4x100
    ECS - Corporate Logo
    T#:369014
    Part#: ECS10165KT
    In Stock
    $76.95
    Free Shipping on orders $99 and up

    Drastically improve the looks of your vehicle while improving your vehicle's handling characteristics and/or easily adjust your wheel fitment to allow for the proper clearance when installing parts such as new wheels, big brake kits, or lowering suspension components.Interference from components such as shocks, springs, or control arms are a common issue when installing wheel that are not a direct OE size replacement. By moving your wheels a few millimeters each, you can give yourself enough clearance for proper wheel fitment and give your car a wider stance in the process.

    ECS Tuning wheel spacers are constructed of high quality 6061-T6 aircraft grade aluminum and are specifically designed by in-house engineers and cnc machined to exact standards, ensuring the best fitment possible. By carefully measuring the OEM wheel hubs and bore dimensions, these spacers mount with minimal clearance to prevent any vibration, retaining the stock-like vibration free operation. 

    ECS Tuning is a performance and genuine parts provider that designs their ECS Tuning branded aftermarket automotive parts in-house to ensure the highest quality and affordability possible. Every part's design is subjected to a rigorous test fit and stress test period to guarantee proper fitment and continued reliability for years to come.

     

    This item fits the following BMWs:
    1984-1991 E30 BMW Non-M Models
    1967-1974 E10 BMW All Submodels
    1977-1983 E21 BMW 320i

    ECS Tuning Wheel Spacers - 15mm - 4x100
    ECS - Corporate Logo
    T#:369016
    Part#: ECS10167KT
    On Order, ETA May 31, 2019
    $81.95
    Free Shipping on orders $99 and up

    Drastically improve the looks of your vehicle while improving your vehicle's handling characteristics and/or easily adjust your wheel fitment to allow for the proper clearance when installing parts such as new wheels, big brake kits, or lowering suspension components.Interference from components such as shocks, springs, or control arms are a common issue when installing wheel that are not a direct OE size replacement. By moving your wheels a few millimeters each, you can give yourself enough clearance for proper wheel fitment and give your car a wider stance in the process.

    ECS Tuning wheel spacers are constructed of high quality 6061-T6 aircraft grade aluminum and are specifically designed by in-house engineers and cnc machined to exact standards, ensuring the best fitment possible. By carefully measuring the OEM wheel hubs and bore dimensions, these spacers mount with minimal clearance to prevent any vibration, retaining the stock-like vibration free operation. 

    ECS Tuning is a performance and genuine parts provider that designs their ECS Tuning branded aftermarket automotive parts in-house to ensure the highest quality and affordability possible. Every part's design is subjected to a rigorous test fit and stress test period to guarantee proper fitment and continued reliability for years to come.

     

    This item fits the following BMWs:
    1984-1991 E30 BMW Non-M Models
    1967-1974 E10 BMW All Submodels
    1977-1983 E21 BMW 320i

    Intercomp 2.5 inch Liquid Filled Tire Pressure Gauge 0-60psi
    Intercomp - Corporate Logo
    T#:3194
    Part#: 360067
    Ships in 9 Business Days
    $54.95
    Free Shipping on orders $99 and up
    Intercomp 2.5" Deluxe 60PSI Air Pressure Gauge: Includes thumb operated bleeder and a high-quality nozzle on a 17" Hose. High visibility with major and minor graduation marks. 2.5" Air Pressure Gauge Liquid-Filled 0-60 psi. The liquid filling helps to reduce variations due to temperature and external pressure. Addiitonally, the liquid helps the gauge to be more shock resistant.


    Schwaben Long Reach Protecta Socket Kit - 3 Pieces
    Schwaben - Corporate Logo
    T#:385658
    Part#: PPS-1721LC
    In Stock
    $46.95