Harnesses & Harness Accessories for BMW E10 2002tii M15 2.0L

Clear BMW chassis

RaceQuip 5 Point Latch And Link 3" Racing Harness - SFI 16.1 Approved
Racequip - Corporate Logo
T#:403220
Part#: 7110XX5PT
In Stock
Starting at $69.95
Starting at $69.95

Racing harnesses are required at any respectable track or strip, but they tend to run upwards of hundreds of dollars. RaceQuip designs and builds safety equipment for just this issue! Since 1975, RaceQuip has been building some of the highest quality racing safety gear on the market. Their high quality and low cost safety gear is the result of wanting to provide "The Best Value in Safety", that keeps drivers safe without draining their wallet.

This Standard 5 Point Latch and Link Racing harness is RaceQuips most popular racing harness, priced at $74.99 or below while still being fully SFI 16.1 Approved.

All harness systems are constructed using drop-forged steel hardware for ultimate strength and reduced weight. All hardware is cadmium plated for added protection. They use only 3" premium polyester webbing and all belts are box-x pattern sewn to ensure uniform stitch length and strength. Belts and hardware are routinely tested to verify compliance with SFI 16.1 standards.

All of their harness sets feature a latch & link system to retain the belts. The latch & link system is distinguished by a pivoting "hammer," called a Duckbill, which locks all of the belts into place by snapping down into a detent. Both shoulder belts and the sub belt are hooked over the link; the link is inserted into the latch; the Duckbill is then brought down into and over the link, securely holding all of the pieces in place.

RaceQuip Latch & Link Harness Systems come as a "pull down" design. This means that the lap belts must be pulled down and away from the center latch mechanism to tighten. Since their belts are "double adjustable", lengths are easily adjusted on either end for ease of installation. Using the included three bar slide you can mount the belts by either wrapping them around a rollbar or by bolting them in place. Snap-in ends and eyebolts are sold separately if you want to install your belts in that manner.

Features and Specifications:

  • Exceeds SFI 16.1 Rating (SFI Tags Affixed)
  • NOT D.O.T. / FMVSS Certified for On Highway Use
  • Premium 3" Polyester Webbing
  • Twin Individual Shoulder Belts
  • Pull Down Style Lap Belt
  • 5 Point Design - Single 2" Crotch Sub Strap
  • 3" Hardware Ends Installed
  • Double Adjustable for Ease of Installation
  • Wrap Around or Bolt-in Mounting
  • Drop-Forged Steel Hardware (no bolts)
  • Shoulders Adjust from 20" to 62"
  • Lap Belt Adjusts 20" to 60"
  • Available in Black, Red, Blue, Yellow, Orange, Purple, Platinum, Green and Pink
  • Can Be Re-webbed (SFI) Upon Expiration
Sabelt Metric Eyebolt - M10 X 1.51 Thread Length 23 mm, 8.8.
Sabelt - Corporate Logo
T#:559198
Part#: CCMI0023
Direct Ship
New Item
$6.00
$6.00

M10 X 1.51

Thread Length - 23 mm

Grade 8.8

Sold Individually

Sabelt FIA Approved 6-Point Saloon Rally Racing Harness
Sabelt - Corporate Logo
T#:552831
Part#: SAFIACCS3
Direct Ship
Starting at $295.00
Starting at $295.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Sabelt FIA approved racing harnesses are designed in a variety of configurations to suit your exact need and vehicle. Found in some of the fastest competition vehicles in the world, you can rest assured that you're being held securely by some of the finest belts available. Made by hand in Italy, quality and consistency are second to none. Whether you choose a four or six point, with aluminum or steel hardware each belt is designed to hold up to the rigors of the racetrack and to perform flawlessly in the event of a collision.

Features:

  • Shoulder straps: full 3aEURtmaEURtm width - aluminum lightweight adjuster
  • Shoulder fixing: snap hook - tribar
  • Lap belts: full 3aEURtmaEURtm width - aluminum lightweight adjuster Pull Up-snap hook fixing
  • New compact buckle designed with crotches slots integrated to main body
  • Crotch straps: 2aEURtmaEURtm width - snap hook / tribar fixing

Sabelt Eye-Bolt Back Plate
Sabelt - Corporate Logo
T#:559179
Part#: CCMI0016
Direct Ship
New Item
$6.00
$6.00

Eye-Bolt Back Plate 65 mm X 65 mm X 3 mm 7/16" UNF Thread Welded Nut, 40 mm


Standard Eye-Bolt
Sabelt - Corporate Logo
T#:559195
Part#: 407005
Direct Ship
New Item
$7.00
$7.00

Diameter - 7/16" UNF

Thread Length - 23 mm,

Total length - 25 mm

Grade 8.8

Sold Individually

RaceQuip 5 to 6 Point Latch And Link Harness Conversion - SFI 16.1 Approved
Racequip - Corporate Logo
T#:403247
Part#: RQ6PTCON
Direct Ship
Starting at $19.95
Starting at $19.95

Racing harnesses are required at any respectable track or strip, but they tend to run upwards of hundreds of dollars. RaceQuip designs and builds safety equipment for just this issue! Since 1975, RaceQuip has been building some of the highest quality racing safety gear on the market. Their high quality and low cost safety gear is the result of wanting to provide "The Best Value in Safety", that keeps drivers safe without draining their wallet.

RaceQuip now offers a conversion kit for those who are looking to upgrade their RaceQuip 5 point harness to a 6 point set. Designed for use with all RaceQuip latch & link harness sets, this conversion uses a "mustache bar" to separate and move the crotch straps outward. The kit includes hardware (no bolts) to allow the belts to be mounted as a wrap around or as a bolt-in. Available in black, red and blue.

All harness systems are constructed using drop-forged steel hardware for ultimate strength and reduced weight. All hardware is cadmium plated for added protection.

Features and Specifications:

  • Exceeds SFI 16.1 Rating (SFI Tags Affixed)
  • NOT D.O.T. / FMVSS Certified for On Highway Use
  • Wrap Around or Bolt-in Mounting
  • Drop-Forged Steel Hardware (no bolts)
  • Available in Black, Red, Blue
  • Can Be Re-webbed (SFI) Upon Expiration

Eye Bolt Back Plate
Sabelt - Corporate Logo
T#:559199
Part#: SB/2049
Direct Ship
New Item
$3.00
$3.00

50 X 25 mm

6 mm Thick

7/16"UNF Thread.

Sold Individually

Westfield Eyebolt
Sabelt - Corporate Logo
T#:559196
Part#: CCMI0017
Direct Ship
New Item
$7.50
$7.50

Length - 50 mm. Long

7/16"

Grade 8.8

Sold Individually


Sabelt FIA Approved 6-Point Saloon Rally Racing Harness
Sabelt - Corporate Logo
T#:552658
Part#: SAFIACCA3
Direct Ship
Starting at $460.00
Starting at $460.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Sabelt FIA approved racing harnesses are designed in a variety of configurations to suit your exact need and vehicle. Found in some of the fastest competition vehicles in the world, you can rest assured that you're being held securely by some of the finest belts available. Made by hand in Italy, quality and consistency are second to none. Whether you choose a four or six point, with aluminum or steel hardware each belt is designed to hold up to the rigors of the racetrack and to perform flawlessly in the event of a collision.

Features:

  • Shoulder straps: full 3aEURtmaEURtm width - aluminum lightweight adjuster
  • Shoulder fixing: snap hook - tribar
  • Lap belts: full 3aEURtmaEURtm width - aluminum lightweight adjuster Pull Up-snap hook fixing
  • New compact buckle designed with crotches slots integrated to main body
  • Crotch straps: 2aEURtmaEURtm width - snap hook / tribar fixing

Sabelt ECE Approved 3-Point Clubman Belt
Sabelt - Corporate Logo
T#:552835
Part#: SACB5
Direct Ship
Starting at $165.00
Starting at $165.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Features:

  • 3 fixing points
  • Shoulder straps: 2" with steel adjusters
  • Lap belts: 2" with steel adjusters and clubman style buckle
Sabelt FIA Approved 6-Point Saloon Rally Racing Harness
Sabelt - Corporate Logo
T#:552660
Part#: SAFIACCS1
Direct Ship
Starting at $370.00
Starting at $370.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Sabelt FIA approved racing harnesses are designed in a variety of configurations to suit your exact need and vehicle. Found in some of the fastest competition vehicles in the world, you can rest assured that you're being held securely by some of the finest belts available. Made by hand in Italy, quality and consistency are second to none. Whether you choose a four or six point, with aluminum or steel hardware each belt is designed to hold up to the rigors of the racetrack and to perform flawlessly in the event of a collision.

Features:

  • Shoulder straps: full 3aEURtmaEURtm width - steel adjuster
  • Shoulder fixing: snap hook - tribar
  • aEUR
  • Lap belts: 2aEURtmaEURtm quick adjuster integrated to buckle tongue - Pull Down. Designed for GT/ Endurance
  • New compact buckle designed with crotches slots integrated to main body
  • Crotch straps: 2aEURtmaEURtm width - snap hook / tribar fixing
RaceQuip 5 Point Latch And Link HANS/HNR Racing Harness - SFI 16.1 Approved
Racequip - Corporate Logo
T#:403240
Part#: RQ5PTHANSHNR
Direct Ship
Starting at $89.95
Starting at $89.95

Racing harnesses are required at any respectable track or strip, but they tend to run upwards of hundreds of dollars. RaceQuip designs and builds safety equipment for just this issue! Since 1975, RaceQuip has been building some of the highest quality racing safety gear on the market. Their high quality and low cost safety gear is the result of wanting to provide "The Best Value in Safety", that keeps drivers safe without draining their wallet.

The HANS/HNR harness set has narrow shoulder belts to better fit a head & neck restraint (HNR) like a HANS device.

All harness systems are constructed using drop-forged steel hardware for ultimate strength and reduced weight. All hardware is cadmium plated for added protection. They use only 3" premium polyester webbing and all belts are box-x pattern sewn to ensure uniform stitch length and strength. Belts and hardware are routinely tested to verify compliance with SFI 16.1 standards.

All of their harness sets feature a latch & link system to retain the belts. The latch & link system is distinguished by a pivoting "hammer," called a Duckbill, which locks all of the belts into place by snapping down into a detent. Both shoulder belts and the sub belt are hooked over the link; the link is inserted into the latch; the Duckbill is then brought down into and over the link, securely holding all of the pieces in place.

RaceQuip Latch & Link Harness Systems come as a "pull down" design. This means that the lap belts must be pulled down and away from the center latch mechanism to tighten. Since their belts are "double adjustable", lengths are easily adjusted on either end for ease of installation. Using the included three bar slide you can mount the belts by either wrapping them around a rollbar or by bolting them in place. Snap-in ends and eyebolts are sold separately if you want to install your belts in that manner.

Features and Specifications:

  • Exceeds SFI 16.1 Rating (SFI Tags Affixed)
  • NOT D.O.T. / FMVSS Certified for On Highway Use
  • Premium 3" Polyester Webbing
  • Twin Individual Shoulder Belts
  • 2" Shoulder Accomodates HNR / HANS Device
  • Pull Down Style Lap Belt
  • 5 Point Design - Single 2" Crotch Sub Strap
  • Hardware Ends Installed
  • Double Adjustable for Ease of Installation
  • Wrap Around or Bolt-in Mounting
  • Drop-Forged Steel Hardware (no bolts)
  • Shoulders Adjust from 20" to 62"
  • Lap Belt Adjusts 20" to 60"
  • Available in Black, Red, and Blue
  • Can Be Re-webbed (SFI) Upon Expiration


RaceQuip Sportsman 5-Point and 6-Point Camlock Racing Harnesses - SFI 16.1 Approved
Racequip - Corporate Logo
T#:403272
Part#: RQSPCAMLOCK
Direct Ship
Starting at $139.95
Starting at $139.95

Racing harnesses are required at any respectable track or strip, but they tend to run upwards of hundreds of dollars. RaceQuip designs and builds safety equipment for just this issue! Since 1975, RaceQuip has been building some of the highest quality racing safety gear on the market. Their high quality and low cost safety gear is the result of wanting to provide "The Best Value in Safety", that keeps drivers safe without draining their wallet.

RaceQuip Sportsman Camlock Harness Sets feature a durable aluminum cam buckle with an activation lever that points downward. The Sportsman cam utilizes a 45Es(right or left) unlatch movement to prevent accidental opening and the precise spring pressure provides a positive feel.

All harness systems are constructed using drop-forged steel hardware for ultimate strength and reduced weight. All hardware is cadmium plated for added protection. They use only 3" (2" for HNR) premium polyester webbing for strength. Belts and hardware are routinely tested to verify compliance with SFI 16.1 standards.

Features and Specifications:

  • Lightweight Aluminum Alloy Cam Buckle
  • Exceeds SFI 16.1 Rating (SFI Tags Affixed)
  • NOT D.O.T. / FMVSS Certified for on Highway Use
  • 5 Point Design - Single 2" Crotch Strap
  • 6 Point Design - Dual 2" Crotch Strap
  • Pull Down or Up Lap Belt Adjusters Available
  • Wide Engagement Cone For Easy Snap In
  • Precise Spring Pressure for a Positive Feel
  • 45Adeg (right or left) Unlatch Movement Mitigates Accidental Opening
  • Cam Buckle Stays Affixed to Right Side Lap Belt
  • Heavy-Duty Drop-Forged 3" Steel Hardware Ends Installed (no bolts)
  • Wrap Around or Bolt-in Mounting
  • Premium 3aEUR Polyester Webbing
  • Transverse Mono Filament Woven for Increased Strength and Smoother Edges
  • Shoulder Belt Adjustment Length is 25" to 72"
  • Lap Belt is Adjustable from 30" to 70"
  • Can Be Re-Webbed (SFI Cert.) Upon Expiration
  • Available in Black, Red, and Blue
Sabelt FIA Approved 6-Point Formula Style Racing Harness
Sabelt - Corporate Logo
T#:552659
Part#: SAFIACCA4
Direct Ship
Starting at $395.00
Starting at $395.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and s