BMW Maintenance & Tune-Up Parts for BMW 5 Series E28 (1982-1988)

Bring your aFe filter back to life with a Restore kit from aFe. Included is filter cleaner & replacement oil. These air filter oils is designed to not harm MAF sensors, while allowing the filter to catch as much debris as possible.

Used for Pro 5 R filters

K&N's drop-in air intake filter is constructed from cotton gauze material between aluminum mesh - this makes for a long lasting, high performance drop-in intake filter. These are very easy to remove and maintain. Turner Motorsport recommends this as one of the first maintenance/modifications you make to your vehicle after you purchase! 

K&N's drop in air filters allow increased airflow - dirt and particles stick to the oil on these filters, making them more effective than traditional paper filters in terms of protection. Additionally, K&N believes their filters are more efficient than paper filers - this means more oxygen getting into the engine, allowing vaporized fuel to burn more efficiently and increasing horsepower and fuel economy. The best of both worlds!

• Covered by the K&N Million Mile Limited Warranty
• Washable and reusable
• Emissions legal in all 50 states
• Will not void vehicle warranty

K&N's drop-in air intake filter is constructed from cotton gauze material between aluminum mesh - this makes for a long lasting, high performance drop-in intake filter. These are very easy to remove and maintain. Turner Motorsport recommends this as one of the first maintenance/modifications you make to your vehicle after you purchase! 

K&N's drop in air filters allow increased airflow - dirt and particles stick to the oil on these filters, making them more effective than traditional paper filters in terms of protection. Additionally, K&N believes their filters are more efficient than paper filers - this means more oxygen getting into the engine, allowing vaporized fuel to burn more efficiently and increasing horsepower and fuel economy. The best of both worlds!

750iL/850i requires 2 filters

Engineered with an exclusive full-synthetic ester formula, these top-tier products are meticulously crafted to cater to various vehicles, including passenger cars, light trucks, performance vehicles, and marine applications. Offering an unparalleled level of quality, they boast an extensive range of viscosity options, ensuring the highest standards in the current market.

• Full-synthetic ester formula suitable for diverse vehicle types
• Exceptional protection, efficiency, and extended drain intervals
• Outstanding wear protection and friction reduction in varied conditions
• High detergency for increased cleanliness and prolonged drain intervals
• Enhanced fuel economy, improved ring seal, and elevated power output
• Unmatched high temperature stability and oxidation resistance for superior lubrication
• Natural high viscosity index providing a thicker oil film in crucial engine components
• Reduced evaporation, ensuring improved efficiency and ring seal
• Blended with polyol ester base stocks for multi-grade properties and enhanced lubricity
• Compatible with both conventional and synthetic motor oils
• Recommended for API SN/SM/SL/SJ/SH/SG/CF and ACEA A3/B3/B4 specifications

EXTRACTOR:

The Schwaben 6.5 Liter Extractor empowers you with swift, hand-operated fluid extraction. Complete with two tubes of varying diameters to suit your unique needs, this system's vacuum release button guarantees seamless operation. Clearing 6.5 Liters (6.8 qts.) of fluid in minutes, it preserves a spotless, oil-free workspace. Its ingeniously designed pour spout ensures mess-free fluid disposal.

Features:

• Stability First: Equipped with a flip-out foot for steady usage, delivering precise extraction.
• Organized Efficiency: Integrated hose storage streamlines your extraction process.
• Perfectly Sized: A 41" main tube (3/8" OD) and two 35" extension tubes (1/4" and 3/16" OD) ensure versatility across applications.
• Beyond Extraction: It doubles as a brake bleeder with the optional ES3248036 Brake Bleeder Hose.
• LIFETIME REPLACEMENT: Like almost all Schwaben tools, this fluid extractor is backed by our lifetime replacement program should anything go wrong!

ADAPTER:

This adapter hose allows a quick and easy suction thru the bleeder screw. This hose has included shut off valve in hose.  This will improve your extractor capabilities and make it even more of an all-in-one tool!

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Since 1999, aFe (Advanced FLOW Engineering) has been developing and manufacturing high quality accessories in their facility in Corona, California. Starting with air filters and intake systems, and now expanding into exhaust systems, suspension components, tuning modules, and more, aFe products are a great way to improve the performance of your BMW without altering its fundamental character. Owned by a BMW enthusiast, aFe power is recognized the world over as a leader in quality performance products for your BMW.

• Constructed with 100% polyurethane
• Five layers of progressively finer mesh cotton gauze media
• Washable and reusable for multiple cleaning cycles
• Excellent dust-holding capacity for a longer service cycle between cleanings
• Integrated urethane bump seal insures a tight, no leak seal
• Outflows stock paper filter for improved horsepower and torque

This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox. This particular filter fits the following BMWs:
E30 M3 (1988-1991)
E30 318i (1984-1985)
E28 528e (1984-1985) and 535i/535is (1985-1988)
E12 5 series, All (1975-1981) - including 528i, 530i, 533i
E23 7 series, All except 745i (1977-1987) - including 730i, 733i, 735i, L7
E24 6 series, All except M6 (1976-1989) - incl. 630CS, 633Csi, 635CSi


This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.

500ml HP600 Race Brake Fluid is specifically formulated to deliver superior performance under extreme racing conditions, where braking systems must endure very high temperatures without failure. This premium DOT 4 brake fluid from Hawk Performance exceeds OE specifications and offers exceptional stopping power and reliability.

• Premium DOT 4 Fluid: Surpasses OEM specifications for enhanced performance.
• High Boiling Points: Minimum dry boiling point of 572°F (300°C) and wet boiling point of 383°F (195°C) ensure optimal performance under extreme conditions.
• Race-Ready: Designed for high-performance racing applications, delivering consistent braking power.
• Enhanced Safety: Higher dry boiling point reduces the risk of brake fluid vaporization, providing reliable stopping power.

For racers and high-performance driving enthusiasts, this brake fluid is essential for maintaining optimal braking performance and safety.

This version uses aFe's highest flowing filter media, which uses a lightly oiled gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.

This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox. This particular filter fits the following BMWs:

E30 3 series: 318i, 318is 318i Convertible 1990-1991
E30 3 series: 325e, 325es 1986-1988
E30 3 series: 325i, 325is 325ic, 325ix 1987-1991
E28 5 Series: 528e 1986-1988
E34 5 Series: 525i 1989-1990
E32 7 Series: 750il 1988-1994 (requires 2 of these filters).

 

Keep your BMW's cooling system in top condition with DEI's Radiator Relief™ Cooling System Flush. This concentrated cleansing agent effectively removes rust and mineral deposits from the radiator core and hose lines, restoring efficiency. Additionally, it dissolves oily residue build-up left by old antifreeze and coolant mixtures, ensuring optimal performance. Simple to use and 100% biodegradable, this flush is recommended for use with distilled water to maintain optimum efficiency. Note that it is intended for a complete coolant flush and should not be added to existing coolant.

Benefits:

• Removes rust deposits from radiator core and hose lines
• Dissolves oily residue for improved performance
• Restores cooling system efficiency
• Simple to use
• 100% biodegradable