Cylinder Head for BMW 5 Series E34 (1987-1995)

Rocker Arm - E30 325e 325i 325is - E34 525i (M20)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:3387

Part#: 11331271429

In Stock

$ 33.99

This product was last offered at the strikethrough price on
05-07-2026

$ 26.99 USD

Add to Wish List

Qty

$ 26.99 USD

Add to Wish List

If there is one weak point to the internals of the M20 engine, it's the camshaft rocker arms. They're actually designed to be the weak link to prevent more extensive damage elsewhere in the valvetrain. The rocker arm actuates the valves as the cam lobe makes contact. But sustained running at high RPM will cause the valves to 'float' or stay open which can lead to contact between the piston and the valves. If this happens too often, it will fatigue and snap the rocker arm. Therefore, any track driven E30 should have the rockers inspected or replaced often, along with a correct valve adjustment. And any high mileage M20 engine is running the risk of failure because of fatigue and weak valve springs. It's also a good idea to use new rocker arms any time a new cam is installed as the cam and the rocker wear together.

Replacement of the rocker arms can be done with the cylinder head in the car but more often, the head is removed. This makes removing the rocker shafts easier. Either way, a new cylinder head gasket set is recommended as it includes all of the gaskets and plugs that you would need. If the head stays on the car, the radiator may need to be removed to allow more access for the shafts to come out. Replacing the engine timing belt is not done at the same time and should be treated as a separate job.

These Febi M20 rocker arms are sold per rocker (order 12 for a complete set). You may also want to replace the eccentric adjusters as it's easy to do and worn eccentrics may prevent you from properly adjusting the valves afterward.

This item fits the following BMWs:
1984-1991 E30 BMW 325e 325es 325i 325ic 325is 325ix
1989-1990 E34 BMW 525i

Show More Show Less

ARP Steel Block Head Stud Kit for M50/M52 & S50/S52 (US Spec) ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3606

Part#: 201-4302

In Stock

19% off MSRP $ 295.92

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 240.99 USD

Add to Wish List

Qty

19% off MSRP

$ 295.92

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 240.99 USD

Add to Wish List

Virtually every top professional BMW engine builder relies on ARP Pro Series head studs. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated to 200,000 psi, ensuring complete heat penetration. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best head studs we've found for the E36 6 cylinder engines, and we highly recommend them in both the racing and forced induction arena. (Due to the additional clamping force between the head and block, these are IDEAL for turbo charging and supercharging!)

Converting from the factory BMW head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set. Kit includes everything pictured -- 14 head bolts, washers, bolts and assembly lubricant.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

These head studs fit the following BMWs/engines (steel block only)
1992-1995 M50 6 cylinder including 325i, 325is and 525i
1996-1999 M52 6 cylinder including 328i, 328is, 323is, 528i
1995-1995 S50US 3.0 liter including 1995 M3 (US only)
1996-1999 S52US 3.2 liter including 1996-1999 M3 (US) and MZ3

Show More Show Less

Engine Hydraulic Valve Lifter - BMW E36 328i, M3, E46, E39, - M52 M54...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:14514

Part#: 11321748884

Ships in 3 Business Days

$ 44.99 USD

Add to Wish List

Qty

$ 44.99 USD

Add to Wish List

Stock OEM hydraulic valve lifter for the M52, M54 and S50 S52 engines. These lifter buckets can last 150,000+ miles but then they no longer fit on the valve stem correctly and a ticking or knocking noise can result. If the lifter is no longer seated correctly, it can lead to the valve not opening correctly. Replacement is straight-forward but requires special tools for working with the camshafts.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
1995-1998 E36 BMW 323is 323ic 328i 328is 328ic M3
1997-2003 E39 BMW 525i 528i 530i M5
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2004-2005 E60 BMW 525i 530i
2004-2005 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
1996-2002 E36/7 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
1998-2000 E36/7 BMW M Roadster M Coupe

Show More Show Less

Head Bolt Set - M60 M62 S62 V8 engine - E32 E34 E38 E39 E53

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:12893

Part#: 11127583115

Ships in 1-2 days

2% off MSRP $ 58.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 57.99 USD

Add to Wish List

Qty

2% off MSRP

$ 58.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 57.99 USD

Add to Wish List

Genuine BMW Cylinder Head Bolt Set - M10X110 for BMW M60,M62,S62 V8 engines. This head bolt set is enough for one cylinder head. 2 sets required per engine.

This item fits the following BMWs:
1983-1995 E34 BMW 530i 540i
1997-2003 E39 BMW 540i M5
1988-1994 E32 BMW 740i 740il
1995-2001 E38 BMW 740i 740il
1990-1999 E31 BMW 840i 840ci
2000-2003 E53 BMW X5 4.4i X5 4.6is
2000-2003 E52 BMW Z8 Roadster

Show More Show Less

BMW M20 Engine ARP Head Stud Kit - E30 325i, E34 525i

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:189783

Part#: 201-4305

In Stock

$ 271.99

This product was last offered at the strikethrough price on
03-18-2026

$ 271.18 USD

Add to Wish List

Qty

$ 271.18 USD

Add to Wish List

Virtually every top professional BMW engine builder relies on ARP Pro Series head studs. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated to 200,000 psi, ensuring complete heat penetration. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best head studs we've found and we highly recommend them in both racing and forced induction applications. Due to the additional clamping force between the head and block, these are IDEAL for turbocharged engines.

Converting from the factory BMW head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

This item fits the following BMWs:
1985-1991 E30 BMW 325e 325es 325i 325ic 325is 325ix
1989-1990 E34 BMW 525i

Show More Show Less

Rocker Arm - M10 4 cylinder, M30 6 cylinder engine

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:6780

Part#: 11331271833

In Stock

$ 30.99 USD

Add to Wish List

Qty

$ 30.99 USD

Add to Wish List

Replace your worn rocker arm with this unit. The rocker arms make contact with the camshaft and control the movement of the valves. Any time a camshaft is replace it is always a good idea to replace the rocker arms with new units. It is also a good idea to replace the rocker shafts that the arms mount on.
Since the late 1800’s Febi has been fabricating replacement metal parts. This history is self evident in the quality and vast amount of applications they service. With more than 34,000 repair solutions for cars and commercial vehicles you can be sure Febi has you covered.

This item fits the following BMWs:
1970-1976 2002 BMW 1600 2002 2002tii
1984-1985 E30 BMW 318i
1976-1981 E12 BMW 528i 530i
1982-1988 E28 BMW 533i 535i 535is
1989-1993 E34 BMW 535i
1982-1989 E24 BMW 633csi 635csi
1981-1987 E23 BMW 733i 735i
1988-1992 E32 BMW 735i 735il

Show More Show Less

Genuine BMW Valve Adjustment Feeler Gauge

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:16410

Part#: 83300490942

Ships in 1-2 days

$ 38.99 USD

Add to Wish List

Qty

$ 38.99 USD

Add to Wish List

GENUINE BMW TEMPLATE

Head Bolt Set - E30 325e 325i E28 528e E34 525i w M20 engine ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2074

Part#: 11121726478

Ships in 5 Business Days

2% off MSRP $ 58.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 57.99 USD

Add to Wish List

Qty

2% off MSRP

$ 58.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 57.99 USD

Add to Wish List

This head bolt set includes all 14 torx head bolts. These bolts must be replaced every time the cylinder head is removed as they stretch on installation. These are Genuine BMW bolts with superior quality to the aftermarket brands currently on the market. For forced induction you should have ARP head studs.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
1984-1991 E30 BMW 325e 325es 325i 325is 325ic 325ix
1982-1988 E28 BMW 528e
1989-1990 E34 BMW 525i

Show More Show Less

Athena Cut Ring Head Gasket - 84.5mm - BMW M50 M52 (84mm Bore) ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26171655

Part#: ATH-HG-CR-M50-84

Ships in 4 Business Days

$ 324.99 USD

Add to Wish List

Qty

$ 324.99 USD

Add to Wish List

Upgrade your BMW engine's performance with the Athena Cut Ring Head Gasket. This gasket replaces BMW part # 11121726619 and 11121726617 and is specifically designed for M50 & M52 iron block inline 6-cylinder engines found in E34/E36 chassis. Standard OEM & MLS gaskets can only handle a certain amount of cylinder pressure before they start to leak, making the Athena Cut Ring Head Gasket the recommended choice for applications making 16+ psi. A compression leak passing the head gasket can cause a range of issues, including engine overheating, loss of power, misfires, and in severe cases, catastrophic engine failure. Athena's gasket is crafted with premium quality reinforced M0115, an asbestos-free material that's original equipment approved and renowned for its superior quality. The AISI 304 stainless steel Cooper Rings bite into the aluminum head, providing maximum sealing capabilities around the cylinder bore and optimizing engine performance, even on engines with nitrous and/or turbo applications that exceed 2-bar boost. Before installation, it is crucial to have the mating surfaces of the cylinder head and block professionally cleaned and resurfaced to ensure they are completely flat. Please be aware that the gasket should have a size that is 0.5mm to 1mm larger than the piston. For example, if the piston measures 84mm, then the gasket should be the next size up, either 84.5mm or 85mm. Installation instructions: Make sure that the engine block and cylinder head surfaces are clean, flat, and free from any debris, oil, or coolant. Install the Cut Ring gasket on the engine block and ensure that it is properly aligned. Avoid twisting or bending the gasket during installation. Place the cylinder head on top of the gasket and install the head bolts or studs in their correct positions. Follow the manufacturer's recommended torque specifications and tighten the bolts or studs in the proper sequence to ensure even clamping force across the gasket. After the initial tightening, re-torque the head bolts or studs after the engine has been started and then allowed to cool to room temperature. This will ensure that the gasket is properly seated and compressed. It is recommended to not use any additional sealant on the MLS gasket, as it is already coated with a Viton rubber sealant. Using additional sealant can hinder the performance of the gasket.

Show More Show Less

Genuine BMW Rocker Arm - M20

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:367624

Part#: 11331271429

Ships in 3 Business Days

$ 59.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 59.97 USD

Add to Wish List

Qty

$ 59.97 USD

Add to Wish List

For optimal valve train performance in your BMW, replace old rockers when shaft/rocker clearance exceeds specifications. When installing a new cam or rocker shafts, it's recommended to re-machine rocker pads or replace rockers to ensure maximum valve train life. The kit includes rockers and provides benefits such as:

Replacement for old rockers with excessive clearance.
Ensures maximum valve train life with new cam or rocker shaft installation.
Rocker bushings may need honing for proper clearance.
Careful inspection of rocker shafts for even wear and replacement if necessary.
Avoid installing new rockers with a worn camshaft to extend service life.
Comprehensive kit for valve train maintenance in BMW engines.

Show More Show Less

Cylinder Head - Complete - M52, S50, S52

For vehicles with production date from 09/1994

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:19419

Part#: 11121703637

Ships on Jul 6, 2026

$ 2,315.99 USD

Add to Wish List

Qty

$ 2,315.99 USD

Add to Wish List

This replacement cylinder head for BMW S52 S50 M52 6 cylinder engine comes completely assembled with new valves, valve springs, valve guides, valve seals and studs. Being assembled this cylinder head makes for a much quicker and easier job of installation. The camshaft is not included but is available separately.

This cylinder head is manufactured in Spain by Amadeo Marti Carbonell, a company that meets or exceeds the ISO 4000, ISO 9000 and TS-16949 standards so you can be assured of a quality part.

This item fits the following BMWs:
1992-1998 E36 BMW 323is 323ic 328i 328is 328ic M3
1995 E34 BMW 525i
1997-1998 E39 BMW 528i
1996-1998 E36/7 BMW Z3 2.8
1998-2000 E36/7 BMW M Roadster M Coupe

Show More Show Less

OEM Elring Cylinder Head Bolt Set - E30 E34 M20 2.5L 2.7L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:2706174

Part#: 11121726478

In Stock

$ 37.99

This product was last offered at the strikethrough price on
02-05-2026

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

Brand new set of cylinder head bolts - the cylinder head bolts need to be replaced after removal, once a bolt is torqued down you're unable to reuse it.

Cylinder Head - Complete - E30 325i, E34 525i, M20 engine

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:222771

Part#: 11121707032C

Ships on Jul 6, 2026

$ 1,322.99 USD

Add to Wish List

Qty

$ 1,322.99 USD

Add to Wish List

This replacement cylinder head for BMW M20B25 6 cylinder engine comes completely assembled with new valves, valve springs, valve guides and seals. Being assembled this cylinder head makes for a much quicker and easier job of installation. The camshaft is not included but is available separately.

This cylinder head is manufactured in Spain by Amadeo Marti Carbonell, a company that meets or exceeds the ISO 4000, ISO 9000 and TS-16949 standards so you can be assured of a quality part.BMW has discontinued this part so this is the only current source for M20 cylinder heads.

This item fits the following BMWs:
1988 E30 BMW 325e 325es
1987-1991 E30 BMW 325i 325ic 325is 325ix
1988 E28 BMW 528e
1989-1990 E34 BMW 525i

Show More Show Less

OEM Head Bolt Set - M50 M52 S50 S52

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1551

Part#: 11121721938

In Stock

Sale - Save 66% $ 62.21

This product was last offered at the strikethrough price on
05-14-2026

$ 20.94 USD

Add to Wish List

Qty

Sale - Save 66%

$ 62.21

This product was last offered at the strikethrough price on
05-14-2026

$ 20.94 USD

Add to Wish List

Head Bolt Set for all M50 engines with a steel engine block.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1991-1995 E34 BMW 525i
1997-1998 E39 BMW 528i
1998-2000 Z3 BMW M Roadster M Roadster

Show More Show Less

Genuine BMW Cylinder Head Bolt Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:367539

Part#: 11121721938

In Stock

$ 60.94 USD

Add to Wish List

Qty

$ 60.94 USD

Add to Wish List

Cylinder Head Bolt Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:582581

Part#: 11121721938

In Stock

$ 30.99

This product was last offered at the strikethrough price on
01-05-2026

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

Genuine BMW Cylinder Head Check Valve

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:19361

Part#: 11121735180

Ships in 1-2 days

4% off MSRP $ 67.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 64.99 USD

Add to Wish List

Qty

4% off MSRP

$ 67.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 64.99 USD

Add to Wish List

Genuine BMW Non-Return Valve
This item fits the following BMW Chassis:
E36 M3,E34,E36,E39,E46,E53 X5 X5,E83 X3,E85 Z4

Fits BMW Engines including:
M50,M52,M54,M56,S50,S52

Show More Show Less

ARP Cylinder Head Stud Kit - M30 BMW 3.0L 3.4L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:379415

Part#: 201-4602

In Stock at Vendor

$ 255.99 USD

Add to Wish List

Qty

$ 255.99 USD

Add to Wish List

Virtually every top professional BMW engine builder relies on ARP Pro Series head studs. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated, ensuring complete heat penetration, to increase the clamping load up to 200,000 psi. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best head studs we've found and we highly recommend them in both racing and forced induction applications. Due to the additional clamping force between the head and block, these are IDEAL for turbocharged engines.

Converting from the factory BMW head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set.

This item fits the following BMW Engines:
M30 3.0L 3.4L I6

Show More Show Less

Genuine BMW Intake Camshaft Oil Splash Shield - M54 2.5L, M52 2.5L, M...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:31264

Part#: 11121740163

Ships in 1-2 days

4% off MSRP $ 25.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.99 USD

Add to Wish List

Qty

4% off MSRP

$ 25.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.99 USD

Add to Wish List

Genuine BMW Cover
This item fits the following BMW Chassis:
E36 M3,E34,E36,E39,E46,E53 X5 X5,E83 X3,E85 Z4

Fits BMW Engines including:
M50,M52,M54,M56,S50,S52

Show More Show Less

Genuine BMW Camshaft Bearing Bridge - Intake

For vehicles with production date from 09/1994

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21667

Part#: 11121740428

Ships in 3 Business Days

9% off MSRP $ 456.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 417.99 USD

Add to Wish List

Qty

9% off MSRP

$ 456.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 417.99 USD

Add to Wish List

Genuine BMW Bearing Ledge Intake
This item fits the following BMW Chassis:
E36 M3,E34,E36,E39,E46,E53 X5 X5,E83 X3,E85 Z4

Fits BMW Engines including:
M50,M52,M54,M56,S50,S52

Show More Show Less

Rocker Arm Shaft - Priced Each

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:371121

Part#: 11331264533

Ships in 5 Business Days

$ 36.99

This product was last offered at the strikethrough price on
05-07-2026

$ 35.99 USD

Add to Wish List

Qty

$ 35.99 USD

Add to Wish List

Genuine BMW Rocker Arm Shaft - 11331274975

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:222758

Part#: 11331274975

Back Ordered

$ 97.99 USD

Add to Wish List

Qty

$ 97.99 USD

Add to Wish List

Genuine BMW Rocker Arm Shaft - 11331274975

This item fits the following BMW Engines:

Motorsport Valve Springs - E30 M3, E24 M6, E34 M5, E36 Euro M3 (Price...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:281

Part#: 11341315912

In Stock

1% off MSRP $ 40.13

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 39.85 USD

Add to Wish List

Qty

1% off MSRP

$ 40.13

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 39.85 USD

Add to Wish List

These Motorsport valve springs are from the Sport Evo 3 model but can be used in all E30 M3s (and others). We found that the stock original valve springs can be too weak when used with upgraded cams and this genuine BMW Motorsport part is an upgrade over the original design. Valve springs also get weaker over time so these are the perfect replacement when refreshing the S14 cylinder head. A weak spring can lead to a burnt valve seat or even a bent valve. These are also the stock springs in the M88/S38 and Euro S50B30.

Priced per valve (price includes 1 inner and 1 outer).

Show More Show Less

Genuine BMW Exhaust Rocker Arm Shaft - Front - E34 535i M30 3.4L ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:19100

Part#: 11331274959

Ships in 9 Business Days

$ 74.99 USD

Add to Wish List

Qty

$ 74.99 USD

Add to Wish List

Genuine BMW Rocker Arm Shaft Exhaust Front -
This item fits the following BMW Chassis:
E34

Fits BMW Engines including:
M30

Genuine BMW Intake Rocker Arm Shaft - Front - E34 535i M30 3.4L ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:19087

Part#: 11331274963

Ships in 9 Business Days

$ 74.99 USD

Add to Wish List

Qty

$ 74.99 USD

Add to Wish List

Genuine BMW Rocker Arm Shaft Intake Front -
This item fits the following BMW Chassis:
E34

Fits BMW Engines including:
M30

ARP Rod Bolt Set - M20 - 53mm

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1061435

Part#: ARP-RBS-M20

Ships on Jun 22, 2026

$ 314.99 USD

Add to Wish List

Qty

$ 314.99 USD

Add to Wish List

ARP, the world’s leader in fastener technology. There is no substitute for the best! Planning to boost your M20? Building a high HP stroker engine? This rod bolt kit is for you! This kit provides higher strength, more clamping power, and the option to re-use the hardware unlike your OEM bolts. We run these in many of our own builds as well and are 110% satisfied with the fit and finish of these ARP bolts. We offer a 53mm UHL version for those running OEM M20 rods or a 44mm UHL version for those who have upgraded to S50/S52 OEM rods.

Show More Show Less

Complete Cylinder Head Basic Replacement Kit M20 2.5L / 2.7L ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:22822554

Part#: E30HEADRPLCKT

Ships on Jul 6, 2026

Sale - Save 3% $ 1,634.99

This product was last offered at the strikethrough price on
01-03-2026

$ 1,587.93 USD

Add to Wish List

Qty

Sale - Save 3%

$ 1,634.99

This product was last offered at the strikethrough price on
01-03-2026

$ 1,587.93 USD

Add to Wish List

Upgrade your BMW M20 2.5L and 2.7L engine with our Complete Cylinder Head Basic Replacement Kit . This kit includes the following essential components:

Cylinder Head Washer
BMW Coolant / Antifreeze - 1 gallon
Copper Exhaust Lock Nut
Oil Filter
Cylinder Head Bolt Set
Engine Oil Drain Plug Washer
Dielectric Spark Plug Boot Protector
BMW TwinPower Turbo 5W-30 Engine Oil
Cylinder Head Gasket
Assembly Lube - 4 oz
Engine Oil Drain Plug
M20 Cylinder Head - complete

Ensure a seamless and efficient replacement process for optimal performance.

Show More Show Less

BMW E28 / E30 / E43 - M20 Complete Cylinder Head Basic Replacement Ki...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2810081

Part#: 11121707032-3KT

Ships on Jul 6, 2026

Sale - Save 3% $ 1,643.99

This product was last offered at the strikethrough price on
01-03-2026

$ 1,595.84 USD

Add to Wish List

Qty

Sale - Save 3%

$ 1,643.99

This product was last offered at the strikethrough price on
01-03-2026

$ 1,595.84 USD

Add to Wish List

Includes all of the necessary components to service and replace the head on your M20 powered BMW

Supertech BMW M50/M52/S50/S52 Dual Valve Spring Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:9126166

Part#: PRK-H1000D-BM

Ships on Jun 22, 2026

$ 763.99 USD

Add to Wish List

Qty

$ 763.99 USD

Add to Wish List

Cylinder Head - Bare - E30 325i, E34 525i, M20 engine

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:22168

Part#: 11121707032

Ships on Jun 29, 2026

$ 999.00 USD

Add to Wish List

Qty

$ 999.00 USD

Add to Wish List

This replacement cylinder head for BMW M20B25 6 cylinder engine includes new valve guides and seals. The stock valve guides are not replaceable so if you need new guides you likely need a new cylinder head.This cylinder head is manufactured in Spain by Amadeo Marti Carbonell, a company that meets or exceeds the ISO 4000, ISO 9000 and TS-16949 standards so you can be assured of a quality part.BMW has discontinued this part so this is the only current source for M20 cylinder heads.

This item fits the following BMWs:
1988 E30 BMW 325e 325es
1987-1991 E30 BMW 325i 325ic 325is 325ix
1988 E28 BMW 528e
1989-1990 E34 BMW 525i

Show More Show Less

AMC Cylinder Head - Bare - E34, E36, E39, Z3

For vehicles with production date from 09/1994

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:383388

Part#: 11121703637

Ships on Jun 29, 2026

$ 1,631.99 USD

Add to Wish List

Qty

$ 1,631.99 USD

Add to Wish List

Bare head with guides and seats only

E36 / E34 / E39 / Z3 - Complete Cylinder Head Basic Replacement Kit ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:15744068

Part#: 114278337690-KT

Ships on Jul 6, 2026

Sale - Save 4% $ 2,878.47

This product was last offered at the strikethrough price on
02-27-2026

$ 2,755.61 USD

Add to Wish List

Qty

Sale - Save 4%

$ 2,878.47

This product was last offered at the strikethrough price on
02-27-2026

$ 2,755.61 USD

Add to Wish List

Introducing the Complete Cylinder Head Basic Replacement Kit for BMW E36, E34, E39, Z3 with M52, S50, and S52 engines - your ultimate solution for efficient and cost-effective engine maintenance. This comprehensive kit is designed to maximize the performance, durability, and longevity of your BMW, ensuring it operates at peak efficiency for years to come. Optimal Engine Performance: Our Complete Cylinder Head Basic Replacement Kit is engineered to enhance your BMW's engine performance. By replacing the cylinder head, you can restore lost power and torque, resulting in improved acceleration and overall driving experience. Improved Fuel Efficiency: Upgrading your BMW with our kit not only boosts power but also enhances fuel efficiency. This means you'll save money on fuel costs while reducing your carbon footprint. Enhanced Durability: The components included in this kit are crafted from high-quality materials, ensuring long-lasting durability. This translates to fewer repairs and less downtime for your vehicle. Cost Savings: Investing in this comprehensive kit is more cost effective than purchasing individual components. It contains everything you need for a cylinder head replacement, eliminating the hassle of sourcing parts separately. OEM-Quality Parts: We prioritize quality and reliability, which is why our kit features OEM-equivalent or superior components. Rest assured that you're getting the best value for your money. Fits Multiple BMW Models: This kit is compatible with various BMW models, including E36, E34, E39, and Z3, with M52, S50, and S52 engines. This versatility ensures that a wide range of BMW enthusiasts can benefit from it. Extended Engine Lifespan: By replacing the cylinder head with our kit, you can significantly extend the lifespan of your BMW engine, leading to more trouble-free miles on the road. Satisfaction Guaranteed: Some kit components are covered by our Lifetime Replacement Program. We stand behind the quality of our Complete Cylinder Head Basic Replacement Kit. Your satisfaction is our priority, and we offer a satisfaction guarantee to provide peace of mind to our valued customers. Kit includes: 1 - BMW Coolant / Anitfreeze 7 - BMW TwinPower Turbo 5W-30 Engine Oil - 1 Liter 1 - Cylinder Head Bolt Kit 1 - Cylinder Head Installation Kit 14 - Cylinder Head Washer - Cylinder Head Bolts 1 - Engine Oil Drain Plug 28 - Exhaust Manifold Nuts 1 - Liquid Assembly Lube - 12 oz 1 - M52 / S52 Cylinder Head - Complete 1 - Turner Motorsport Oil Change Sticker 1 - Oil Filter Kit

Show More Show Less

Febi Cylinder Head Bolt Kit - E36, E39, E46, Z3

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:363745

Part#: 11121721938

Ships on Sep 1, 2026

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Set of 14 stretch bolts for installing cylinder head

Genuine BMW Dowel - 11121726241

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:31215

Part#: 11121726241

In Stock

13% off MSRP $ 2.11

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1.83 USD

Add to Wish List

Qty

13% off MSRP

$ 2.11

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1.83 USD

Add to Wish List

Genuine BMW Dowel - D=12,5Mm
This item fits the following BMW Chassis:
E39 M5,E60 M5,E63 M6,E82 1M Coupe,E53 48IS,E30,E34,E36,E38,E39,E53 X5 X5,E63,E65,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36

Show More Show Less

Genuine BMW Rocker Shaft Snap Ring - E10 E12 E23 E24 E28 E30 E32 E34 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:6776

Part#: 11330634135

Ships in 4 Business Days

$ 1.99 USD

Add to Wish List

Qty

$ 1.99 USD

Add to Wish List

Genuine BMW Spring Washer -

This item fits the following BMW Chassis:
E30,E34

Fits BMW Engines including:
M10,M30

Genuine BMW Washer - 11127550856

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:31410

Part#: 11127550856

In Stock

$ 3.99 USD

Add to Wish List

Qty

$ 3.99 USD

Add to Wish List

Genuine BMW Washer
This item fits the following BMW Chassis:
E36 M3,E39 M5,E60 M5,E63 M6,E53 48IS,E30,E34,E36,E38,E39,E46,E53 X5,E63,E65,E70 X5 X5,E83 X3,E85 Z4,E90,E92,E93

Show More Show Less

Genuine BMW Rocker Shaft Spring - E10 E12 E21 E23 E24 E28 E30 E32 E34...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:6774

Part#: 11330634125

In Stock

$ 4.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 4.99

This product was last offered at the strikethrough price on
12-08-2025

$ 2.99 USD

Limited Qty Sale

Add to Wish List

Genuine BMW Compression Spring -

This item fits the following BMW Chassis:
E30,E34

Fits BMW Engines including:
M10,M30

Cylinder Head Bolt Washer

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26538363

Part#: 11127550856

In Stock

$ 2.50 USD

Add to Wish List

Qty

$ 2.50 USD

Add to Wish List

Febi Eccentric Bolt - E12, E21, E23, E24, E28, E3, E30, E32, E34, E9 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:382364

Part#: 11331744355

In Stock

$ 2.99 USD

Add to Wish List

Qty

$ 2.99 USD

Add to Wish List

Used on rocker arm eccentric

OEM INA Hydraulic Lifter - BMW M5X S5X M62 S62

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:360996

Part#: 11321748884

In Stock

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

Stock replacement hydraulic valve lifter for the M52, M54 and S50 S52 engines. These lifter buckets can last 150,000+ miles but then they no longer fit on the valve stem correctly and a ticking or knocking noise can result. If the lifter is no longer seated correctly, it can lead to the valve not opening correctly. Replacement is straight-forward but requires special tools for working with the camshafts. This item fits the following BMWs:
1995-1998 E36 BMW 323is 323ic 328i 328is 328ic M3
1997-2003 E39 BMW 525i 528i 530i M5
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2004-2005 E60 BMW 525i 530i
2004-2005 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
1996-2002 E36/7 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
1998-2000 E36/7 BMW M Roadster M Coupe

Show More Show Less

Genuine BMW Cylinder Head Hose Connector

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:31265

Part#: 11121740396

In Stock

$ 15.99 USD

Add to Wish List

Qty

$ 15.99 USD

Add to Wish List

Genuine BMW Connector - M12

This item fits the following BMW Chassis:
E36 M3,E30,E34,E36,E39

Fits BMW Engines including:
M10,M20,M30,M50,M52,S50,S52

Show More Show Less

Meistersatz Cylinder Head Bolt Kit - E34, E36, E39, Z3

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1195780

Part#: 11121721938

Ships in 4 Business Days

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

Set of 14 stretch bolts for installing cylinder head

Cylinder Head Bolt - M10 1.8L - Set Of 10 - (NO LONGER AVAILABLE) ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:379589

Part#: 11120621144

Ships in 4 Business Days

$ 68.99 USD

Add to Wish List

Qty

$ 68.99 USD

Add to Wish List

OEM Rein Rocker Arm Shaft Plug - E28 E30 E34

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:583592

Part#: 11331264519

In Stock at Vendor

$ 6.11 USD

Add to Wish List

Qty

$ 6.11 USD

Add to Wish List

This is an OEM Rein replacement rocker arm shaft plug, also referred to by BMW as a Blind Plug. This plug connects to the end of the rocker arm shafts. 4 required per vehicle. Replace your old plugs to keep everything properly sealed.

Show More Show Less