BMW Gaskets, Gasket Sets, Seals, & O-Rings for BMW 3 Series E36 (1992-1998)

Replacement Head Gasket Set Fits E36 318i 318is 318ic 1996-1998 with M44 engine, and Z3 1.9 1996-1998. Includes all the gaskets and seals needed when rebuilding the cylinder head. Includes head gasket.

This set of gaskets is a both a time and money saver. It includes all of the commonly replaced gaskets, seals, and o-rings when performing this overhaul. Having these on hand instead of chasing them down at the last minute will save you time, money, and frustration. With this area of the engine apart you're going to want or need to replace these items anyway to ensure it's free of fluid and vacuum leaks. This is especially important because some states have very strict emissions regulations and vacuum and oil leaks can lead to failed inspections tests. On newer cars this can also create issues in the on-board diagnostics system. Even if you're not pulling the head this set includes so many valuable parts you'll want to keep this on hand to use for spares.
If you drive a European vehicle, chances are high your vehicle came equipped with one or more Victor Reinz gaskets. Choose OE quality VR gaskets and seals and do the job right the first time.

Complete Parts List

(click to expand)

BMW p/nQtyDescription

071199631302screw plug gasket ring

071199633551timing rail screw plug o-ring

111212479481gasket

111214339501head gasket

111217214751spark plug hole / valve cover screw
profile gasket

111217214763spark plug hole profile gasket

111217218761main valve cover gasket

1112172187915valve cover screw seal

111412478371profile gasket between
outer upper and lower timing covers

111412478491profile gasket between
inner upper and lower timing covers

111417430651upper timing cover profile gaskets

113490654382valve stem seals
2 sets = 16 valves

115117396911o-ring

115317431791thermostat housing o-ring

116112474782upper and lower intake plenum profile gasket

116117346841lower intake plenum profile gasket

116214353662exhaust manifold gasket plate

117214353671gasket

117275052591gasket

121417483981camshaft position sensor o-ring

135317202511fuel pressure regulator o-ring, large

135317202521fuel pressure regulator o-ring, small

135417398091throttle body o-ring profile gasket

136417307674fuel injector o-ring

136417433774fuel injector o-ring

183017119691exhaust manifold flange gasket

This item fits the following BMWs:
1996-1998 E36 BMW 318i 318is 318ic 318ti
1996-1998 Z3 BMW Z3 1.9

NOW LOCATED UNDER T#337962

This item fits the following BMWs:
1996-1999 E36 BMW M3
1998-2000 Z3 BMW MZ3 Roadster, Coupe

Head Gasket Set for E30 318i 318is 318ic 1989-1993 with M42 engine, E36 318i 318is 1992. Includes all the gaskets and seals needed when rebuilding the cylinder head. Includes head gasket.

This set of gaskets is a both a time and money saver. It includes all of the commonly replaced gaskets, seals, and o-rings when performing this overhaul. Having these on hand instead of chasing them down at the last minute will save you time, money, and frustration. With this area of the engine apart you're going to want or need to replace these items anyway to ensure it's free of fluid and vacuum leaks. This is especially important because some states have very strict emissions regulations and vacuum and oil leaks can lead to failed inspections tests. On newer cars this can also create issues in the on-board diagnostics system. Even if you're not pulling the head this set includes so many valuable parts you'll want to keep this on hand to use for spares.
If you drive a European vehicle, chances are high your vehicle came equipped with one or more Victor Reinz gaskets. Choose OE quality VR gaskets and seals and do the job right the first time.

Complete Parts List

(click to expand)

BMW p/nQtyDescription

071199630414gasket ring

071199631301coolant temp sensor o-ring

071199632001coolant temp sensor o-ring

071199633551timing chain tensioner o-ring

111217214751spark plug / valve cover screw profile gasket

111217214763spark plug profile gasket

111217215461head gasket

111217218761valve cover gasket

1112172187915valve cover mounting bolt seal

111412478371profile gasket between outer upper
and lower timing covers

111412478491profile gasket between inner upper
and lower timing covers

111417219191upper timing cover profile gaskets

113490591712valve stem seals
2 sets = 16 valves

115317211721thermostat housing profile gasket

115317212181thermostat o-ring

116117177611intake plenum-to-intake trumpet
profile gasket (E30 only)

116117344901profile gasket between upper
and lower intake manifold sections (E36 only)

116117346841lower intake manifold profile gasket

116217289832exhaust manifold gasket plate

121417272201camshaft position sensor o-ring

135317202511fuel pressure regulator o-ring, large

135317202521fuel pressure regulator o-ring, small

135417432611throttle body-to-manifold profile gasket

136417307678fuel injector o-ring

183017119691exhaust manifold flange gasket

This item fits the following BMWs:
1989-1993 E30 BMW 318i 318is 318ic
1992 E36 BMW 318i 318is

This is the front crankshaft seal (48x65x10) for most BMW's with M20, M60, M62 engines. 

Made by Elring.

This item fits the following BMWs: 
1984-1991 E30 BMW 325e 325es 325i 325ic 325is 325ix 
1982-1988 E28 BMW 528e 
1989-1990 E34 BMW 525i 
1997-2003 E39 BMW 540i M5 E32 BMW 740i 740il
1995-2001 E38 BMW 740i 740il
1990-1999 E31 BMW 840i 840ci
2000-2003 E53 BMW X5 4.4i X5 4.6is
1998-2002 Z3 BMW M Roadster M Coupe
2000-2003 E52 BMW Z8 Roadster