BMW Engine Parts for BMW 3 Series E36 (1992-1998)

Ignition coils are key to the efficiency and performance of your BMW. With a faulty coil the spark plug is not burning the air/fuel mixture properly and that can lead to problems anywhere in the engine and exhaust (including catalytic converters and O2 sensors). Problems with one or more coils will cause a fault code but not always a check engine light. A misfire code may be related to an ignition coil but could be from other things as well. Sometimes a visual inspection of a coil and coil boot will give an indication of a failure. You can also move coils around to different cylinder banks to see if the misfire code follows a suspect coil. We suggest always having one or two coils on hand to keep as spares.

This Bremi coil was used in M42, M50, M50tu, and M60 engines. BMW has made numerous changes to ignition coil part numbers in recent years but has approved this part number to work in the vehicles listed below. This part number replaces previous BMW part numbers 12131703359, 12131731884, 12131730765, 12131748394, 12131729842, 12131726178, 12131726177, 12131727108, 12131734468, and 12131748395.

Sold per coil. Does not includes connecting boot. If in need of connecting boots please purchase part number 12139067831

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
1990-1991 E30 BMW 318i 318is 318ic
1991-1995 E36 BMW 325i 325i 325ic M3
1991-1995 E34 BMW 525i 530i 540i
1992-1994 E38 BMW 740i 740il
1995 E38 BMW 740i 740il
1991-1996 E31 BMW 840i 840ci

If there is a large amount of oil on the sides of the engine or if you can smell burning oil, chances are it's a bad valve cover gasket. The gasket fails and allows oil to seep down onto the side of the engine and other parts causing a mess and reducing the amount of oil in your engine. This replacement gasket from Elring is perfect to prevent any further oil leaks.

Includes the following Seals:

• Valve cover gasket
• Spark plug seals

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following BMW engines:
M52 2.5L 2.8L (up to 09/1998)
S52 3.2L

If you're experiencing hard starting, flaky charging, or other electrical issues, your engine ground strap may be the culprit. On older BMWs, the engine ground strap is a thin, non-insulated cable that spans from the engine mount arm to the frame horn. Despite the seemingly simple nature of this part, on older cars, it is known to cause massive headaches. Due to its non-insulated design, years of exposure to water, dirt, and road salt will cause the wire to corrode, ultimately leading to complete failure. A break in this cable will cause an open circuit, resulting in issues with the vehicle's electrical system and potentially leading to a no-start condition.

To solve this issue, ECS has engineered an exact-fit, upgraded ground strap for your BMW! Unlike its OEM counterpart, this design features insulated, large-gauge copper wire for dependable conductivity and long-lasting durability. Additionally, factory-style lugs are zinc-coated, crimped, and soldered, ensuring protection against corrosion and oxidation.

Whether you're replacing a visibly corroded strap or proactively preventing failure, this solution from ECS is sure to provide lasting performance and protection.

FEATURES

Direct-fit replacement and upgrade for E30 (318i/is), E36, E39, E46, and others Solves intermittent grounding issues caused by aging OEM straps Clean, stealthy design that fits seamlessly in factory engine bays Factory length and lug orientation for drop-in fitment 2 AWG tinned copper cable for excellent conductivity and corrosion resistance Zinc-coated lugs, crimped and soldered to resist moisture and oxidation Black UL1015-grade insulation withstands oil, heat, and abrasion Discreet ECS label for a clean, OEM+ look Replaces OEM part numbers 12421737755 and 12421714262.

A new oxygen sensor can improve driveability and lengthen engine life. Ultimately, you achieve a smoother running engine that is more fuel efficient. Feedback from the oxygen sensor provides closed-loop control of the injected quantity of fuel for optimum air-fuel mixture, enabling virtually complete combustion to take place. Contaminants in gas and certain atmospheric conditions can drastically shorten the life of any oxygen sensor, therefore they should be checked with every periodic maintenance and changed if necessary. Bosch Part # 13 231. Replacement for BMW part # 11781735499 and 11781738282.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
1988-1991 E30 BMW 325i 325is 325ix 325ic
1992-1995 E36 BMW 318i 318is 318ic 318ti
1992-1995 E36 BMW 325i 325is 325ic M3
1993-1995 E34 BMW 530i
1993-3/1994 E34 BMW 540i
1993-1994 E32 BMW 740i 740il
1988-1994 E32 BMW 750il
1990-1994 E31 BMW 850i 850ci

This OEM Ruville hydraulic tensioner assembly is designed to keep the serpentine belt at the correct pressure against the pulleys. Many BMW's can have either a hydraulic or mechanical belt tensioner. Please check to see which tensioner type you need before ordering.

OEM Schaeffler (INA, LuK, Ruville, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
1991-1995 E34 BMW 525i
1997-2003 E39 BMW 525i 528i 530i

Elevate your custom installation with the ECS -10AN O-Ring Boss fitting, a crucial component that connects your ECS Tuning Catch Can to a 3/4" ID hose. This fitting simplifies your plumbing setup, ensuring a seamless solution.

Featuring a pre-installed Viton O-ring, this fitting is engineered for excellence, providing a leak-proof seal that resists the effects of oil and fuel exposure, guaranteeing long-term durability.

The 3/4" nipple is thoughtfully designed with barbs to secure hose position effectively, minimizing the risk of hose disconnection. Keep in mind that clamps and hoses are available for separate purchase. These fittings are sold individually, with most installations requiring a pair of them.

Turner Motorsport BMW Timing Chain Tensioner Replacement

Introducing the BMW Timing Chain Tensioner Replacement by Turner Motorsport, a vital component to maintain optimal tension and prevent timing chain issues. Engineered for reliability, this replacement ensures the proper functioning of your cam gears and crank, preventing potential engine damage.

Benefits:

• Crucial for timing chain tension
• Prevents chain skipping
• Safeguards against catastrophic engine damage
• Quiets noisy chains for a smoother engine operation

Replace your BMW's timing chain tensioner with this Turner Motorsport solution to keep your engine running smoothly.

Ensure optimal engine performance in your BMW M50 M52 Engines with Turner Motorsport's Mahle Piston Ring Set. Over time, worn piston rings can lead to power loss, increased oil consumption, and white smoke from the tailpipe. When rebuilding your BMW's engine, replacing the piston rings is essential for restoring power and efficiency. Each set is priced individually, with six sets required for complete engine overhaul.

Key Benefits:

• Restores engine power and efficiency
• Reduces oil consumption
• Prevents white smoke from the tailpipe
• Compatible with M50 M52 Engines

Upgrade your BMW's oil pressure sensor setup with the Oil Distribution/Sending Block. This versatile block is designed to mount in the stock oil pressure sensor location on the oil filter housing or in the original location on the engine block. It allows the use of up to two aftermarket sending units (not included) along with the factory sensor, providing accurate pressure and temperature measurements. Engineered for reliability and cleanliness, it ensures a reliable setup for your BMW's oil pressure monitoring needs.

• Mounts in stock oil pressure sensor location for easy installation
• Allows use of up to two aftermarket sending units in addition to the factory sensor
• Incorporates factory sending unit for utilizing the factory oil pressure light
• Threaded for one M12x1.5 port and two 1/8th NPT ports for versatility
• Includes banjo bolt and crush washers for secure installation
• Compatible with various BMW engines including M20, M42, M50, M52, M54, N52, N54, S50, S52, S54, S65, M10, S14, and M30