BMW E46 M3 S54 (1999-2005)

Shark Injector V2.0 Performance Software includes:

• Excellent horsepower and torque gains
• Faster and smoother throttle response
• Top speed limiter removed
• Extremely easy to install/uninstall
• Reversible and reusable
• Elevated 8,250 RPM rev limiter
• Compatible with 91 octane; 93 recommended
• Sport Mode Memory Function - retains last setting on each startup

Performance software is a must-have upgrade on your E46 M3 and you won't find an easier and better software solution than the Shark Injector. This device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before.

Building on the super-simple-to-use original Shark Injector, our new V2.0 capitalizes on this simplicity while heightening the driving experience with more power! Have a tune from the previous Shark Injector version - and want more power? Upgrades from Shark V1.0 to V2.0 are available. Give us a call and we'll be happy to discuss upgrades.

Our newest M3 performance software was developed on the dyno to create maximum power and torque using premium 91 octane fuel and revising the torque limiters in the ECU, although even more power is to be had using 93 octane fuel. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM, with serious power to be found over 4,000 RPM. By fine tuning these maps we've been able to improve the S54 engine beyond what BMW did by making more power and torque and a smoother-running engine. The top speed limiter is removed, and rev limiter lifted to 8,250 RPM.

E46 M3 Dyno
Power and Torque Gains
Stock software: 283 whp / 232 wtrq
Shark Injector V2.0: 301 whp / 243 wtrq
Peak gain 18whp and 11wtq
(note: the max gain (biggest improvement) is 22whp at 6400 RPM, with 16wtq at 5600 RPM)

The Shark Injector plugs into the diagnostic port inside the E46 cabin. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box!

Looking to maximize your power gains? Add a Turner IAT Relocation to combat power-robbing heat soak - the only true plug-and-play solution available. Heat soak is a real plague on consistent power for a stock or tuned vehicle. Click here to read more about our IAT relocation kit.

Shark Injector installation instructions
Shark Injector FAQ

This item fits the following BMWs:
2001-2006 E46 BMW M3 (US models only) 

Shark Injector Performance software includes:

• Saves your last Sport Mode setting
• Horsepower and torque gains
• Faster and smoother throttle response
• Top speed limiter removed
• Extremely easy to install/uninstall
• Reversible and reusable

Performance software is a must-have upgrade on your E46 M3 and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!

The M3 performance software was developed on the dyno to create maximum power and torque using premium 91+ octane fuel and revising the torque limiters in the ECU. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. Choose between a stock or raised rev limit. The top speed limiter is removed. By fine tuning these maps we've been able to improve the S54 engine beyond what BMW did by making more power and torque and a smoother-running engine.

The Shark Injector plugs into the diagnostic port inside the E46 cabin. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.

E46 M3 Dyno

Power and Torque Gains Stock: 278.2 whp / 235.3 wtrq Sharked: 284.2 whp / 236.9 wtrq Peak Gain 6.0 rear wheel HP and 1.6 rear wheel Torque (note: the max gain (biggest improvement) is 9 rear wheel HP between 7000 and 8000 rpm)

The Sport Mode Memory option will remember if you left the car in Sport Mode or not. When you restart the car it will be in the last setting you used. This is perfect for owners who use Sport Mode all the time. You won't have to remember to press the button each time you start the car. The Sport Mode button functions the same as before so you can turn Sport on/off at any time. The software will remember which one you left it in.

Looking to maximize your power gains? Add a Turner IAT Relocation to combat power-robbing heat soak - the only true plug-and-play solution available. Heat soak is a real plague on consistent power for a stock or tuned vehicle. Click here to read more about our IAT relocation kit.

Shark Injector Installation Instructions

(click to expand)

Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is either 91 or 93.

Shark Injector FAQ

(click to expand)

Shark Injector FAQ

This item fits the following BMWs:
2001-2006 E46 BMW M3 (US models only)

APR Valve Stem Caps - Set Of 4 - Gunmetal offer a stylish and functional upgrade for any vehicle. These high-quality aluminum valve stem caps come in a sleek gunmetal finish and feature an engraved APR logo, which adds a touch of sophistication to your wheels.

• Material: Made from durable aluminum for long-lasting performance
• Design: Engraved APR logo adds a distinctive look
• Finish: Gunmetal color enhances the visual appeal of your wheels
• Set Includes: 4 valve stem caps for a complete upgrade
• Compatibility: Fits most standard valve stems

These APR Valve Stem Caps are designed to provide both aesthetics and durability, making them a great choice for enhancing your vehicle's style.