Search | Turner Motorsport

VTT M12 Titanium Wheel Stud Kits

2X Entries Into Our F80 M3 Sweepstakes

T#:7292019

Part#: TISTUD20125

In Stock

Sale - Save 7% $ 335.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 311.99 USD

Add to Wish List

Sale - Save 7%

$ 335.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 311.99 USD

Add to Wish List

VTT is proud to offer Titanium wheel stud kits for the vehicle owner looking for the lowest possible unsprung weight while maintaining high strength, and good looks. This kit is 60% lighter than factory steel studs and nuts with a total kit of 20 nuts, and studs being 3.1LBS. VTT kit details are as follows: Grade 5 Titanium studs, rated at more than 135,000PSI Tensile Strength Grade 5 Titanium nuts with 60-degree cone seat to fit most all aftermarket wheel applications M5 Hex for easy installation Three Colors Available – Raw, Black, Burnt M12x1.5x75mm This fits all M12x1.5 applications Installation notes: Apply locktite to the studs (short end) and torque to 20 ft/lb. Lug nuts should be torqued to factory specifications. For safety retorque all hardware (studs and nuts) after 25-50 miles.

Show More Show Less

Genuine BMW Headlight Washer Cover - Left - E46 323Ci 325Ci 328Ci 330...

T#:10769

Part#: 61677066843

Ships in 2 Business Days

$ 26.99 USD

Add to Wish List

Qty

$ 26.99 USD

Add to Wish List

Genuine BMW Cover, Spray Nozzle Left Primed
This item fits the following BMW Chassis:
E46 M3,E46

SCORCHER High-Performance Ignition Coil - Set Of 6 - BMW N52 N54 N55 ...

T#:48401495

Part#: 77-92013-MC

In Stock

$ 262.00 USD

Add to Wish List

Qty

$ 262.00 USD

Add to Wish List

Upgrade your vehicle’s ignition system with aFe POWER’s SCORCHER High-Performance Ignition Coils, a premium direct replacement for your factory coils. aFe's high-performance coils have a lower primary resistance than factory units, resulting in a high-energy spark that ensures complete combustion from idle to redline. Peak Output: Experience up to 20% more spark energy compared to your factory coils. SCORCHER Ignition Coils keep the pace with the demands of higher RPM ranges and at wide-open throttle, always ensuring your ignition system is performing at its best. When upgrading to our Scorcher High-Performance Ignition Coils, it is recommended to replace your vehicle's spark plugs at the time of installation for optimal performance.

Show More Show Less

Continental Windshield Washer Pump

We Price Match - Give Us A Call or Chat!

T#:579170

Part#: 246082008025G

Ships in 1 Business Day

$ 38.06

This product was last offered at the strikethrough price on
04-17-2026

$ 37.61 USD

Add to Wish List

Qty

$ 37.61 USD

Add to Wish List

Located in the washer reservoir

Conical Seat To Ball Seat Adapter - Set Of 20

10X Entries Into Our F80 M3 Sweepstakes

T#:591025

Part#: MHCBAKT1

In Stock

Sale - Save 20% $ 39.99

This product was last offered at the strikethrough price on
06-14-2026

$ 31.84 USD

Add to Wish List

Qty

Sale - Save 20%

$ 39.99

This product was last offered at the strikethrough price on
06-14-2026

$ 31.84 USD

Add to Wish List

Grey Wheel & Rim Flagged Tip Brush - Priced Each

T#:31589376

Part#: ACCG09

In Stock

$ 12.99 USD

Add to Wish List

Qty

$ 12.99 USD

Add to Wish List

Genuine BMW Cable Strap With Bracket - 61138375988

T#:140990

Part#: 61138375988

In Stock

$ 1.99 USD

Add to Wish List

Qty

$ 1.99 USD

Add to Wish List

Genuine BMW Cable Strap With Bracket - ?=7,9 / L=150
This item fits the following BMW Chassis:
E60 M5,E63 M6,E46 M3,E70 X5M,E71 X6M,E82 1M Coupe,E85 Z4M,E53 48IS,E46,E53 X5,E63,E65,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F25 X3,F26 X4,F30,F31,F32,F34,i3i12

Show More Show Less

Wheel Pin Tool for Changing Wheels or Measuring Spacers

T#:1977

Part#: 71111093774

In Stock

1% off MSRP $ 37.53

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 37.01 USD

Add to Wish List

Qty

1% off MSRP

$ 37.53

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 37.01 USD

Add to Wish List

This old-fashioned tool serves a number of purposes - A) It's a must-have for changing wheels. B) It's also useful for mocking a wheel on the hub to measure for spacer thickness. It's inserted into one of the bolt holes by hand and easily slides out when done.

A) This wheel pin (wheel stud) makes changing wheels a snap. When it's pressed into the wheel hub, the new wheel slides right over it and each bolt hole lines up perfectly. No more wrangling with a wheel/tire to get the bolts to line up! After installing your other wheel bolts, slide this out of the wheel and replace it with the last wheel bolt. We love this tool over all others because it's so easy to use. This tool slides into the bolt hole - it's not threaded so there's no danger of cross-threading or damaging the threads inside. And it's not affected by rust or other contaminants. Most BMW tool kits come with this tool already so it's easy to store and every BMW mechanic will be familiar with it.

B) If you're trying to figure out what size spacer to use this tool can make things easier. With the pin pressed in to the hub you can then slide M12 washers over it to mimic the thickness of a spacer. The extra length of this pin allows you to slide the wheel back/forth to set the positon of the wheel. Measure the thickness of your washers and that's your spacer size! For this procedure, it's recommended that you have 2 of these pins so the wheel does not rotate out of position.

Show More Show Less

Turner BMW 7.5mm Wheel Spacers (Pair) - Normal Pad

10X Entries Into Our F80 M3 Sweepstakes

T#:6181664

Part#: TWH9905003T

In Stock

Sale - Save 3% $ 141.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 137.73 USD

Add to Wish List

Sale - Save 3%

$ 141.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 137.73 USD

Add to Wish List

7.5MM (.30 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4 Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems -- Correct wheel offset issues Achieve a flush fitment instead of the "tucked under" look Clearance the wheel from contact with other components (suspension, brakes, etc). Improve handling and stability by increasing track width A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. This latest generation of the Turner Motorsport Wheel Spacers represents a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is lightweight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better-engineered wheel spacer on the market! Turner Wheel Spacer Features -- hub-centric design, 1-piece spacer with hubcentric lip precise tolerance fitment thanks to CAD process and CNC mill machine aerospace grade aluminum lightweight but very strong with high resistance to corrosion additional military-spec hardcoat for further corrosion resistance innovative Quick Release pockets for easy removal (better than a chamfered back edge) laser engraved size and part number for easy identification stealthy anthracite or black color extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available) Turner Motorsport track and street tested! Made in the USA Extended Wheel Bolts Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are very high quality and high-grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing. Wheel Spacer Tech & FAQ: How To Measure for Spacers Wheel Spacer Encyclopedia - everything you wanted to know Spacer Specs: bolt pattern: 5 x 120 center bore: 72.6mm hubcentric: yes wheel pad size: normal Year & Model Applications : 2008-2012 E82 BMW 128i 135 1M 1988-1991 E30 BMW M3 1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan 2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon 2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe 2007-2012 E93 BMW 328i 335i M3 - Convertible 1976-1981 E12 BMW 528i 530i 1982-1988 E28 BMW 524td 528e 533i 535i 535is M5 1989-1995 E34 BMW 525i 530i 535i 540i M5 2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5 1982-1989 E24 BMW 633csi 635csi M6 2004-2010 E63 BMW 645ci 650i M6 1981-1987 E23 BMW 733i 735i 1988-1994 E32 BMW 735i 735il 740i 740il 750il 1995-2001 E38 BMW 740i 740il 750il 1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi 1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe 2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe 2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Show More Show Less

Turner - 3.5" Black Chrome Swivel Exhaust Tips - Set of 4

10X Entries Into Our F80 M3 Sweepstakes

T#:39802153

Part#: 049478LA03-02KT1

In Stock

Sale - Save 10% $ 279.99

This product was last offered at the strikethrough price on
06-14-2026

$ 251.96 USD

Add to Wish List

Qty

Sale - Save 10%

$ 279.99

This product was last offered at the strikethrough price on
06-14-2026

$ 251.96 USD

Add to Wish List

Set of 4 universal 2.5" inlet to 3.5" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Black Chrome
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Show More Show Less

Powerflex Tuneable Hybrid Urethane Engine Mounts - Street - E36, E46,...

T#:14849765

Part#: PFF5-4650

Ships in 1 Business Day

$ 431.99 USD

Add to Wish List

Qty

$ 431.99 USD

Add to Wish List

Why have only one engine mount? The Powerflex Tuneable "Hybrid" Urethane & Aluminum engine mounts for the E36, E46, and E90/E92 M3 are configurable to match your current car spec. It's "tuneable" to multiple performance settings - - Street Performance with a dual-urethane core (65A and 80A bushings) - Track Performance using stiffening pins inserted into the mount. The mount does not need to be removed to insert the pins, making this a tuneable mount from the paddock. Also available is a full-race mount with a 95A black urethane core and stiffening pins. With the stiffest configuration the Powerlfex mount is a whopping 675% stiffer than a new M3 engine mount! Other BMW urethane engine mounts are made with a single solid urethane block of one durometer. This is simple and cheap to manufacture but is not ideal for most scenarios - the mount is either too stiff or not stiff enough and poor manufactuing quality leads to continued problems. Powerflex properly engineered their mount to absorb vibrations while providing exceptional strength and sheer resistance. The design uses a "soft" Red 65A urethane to absorb Noise, Vibration, and Harshness (NVH) with a stiffer Purple 80A urethane for improved strength and performance. If you desire a stiffer mount for tracking or drifting the mount can be made stiffer without removing it from the car! Unsnap the yellow retaining collar and insert the four stiffening rods. This reduces deflection in the mount and makes it stronger. Why would you want a stiffer engine mount? Mounts need to be stronger to withstand the higher stresses seen with hard driving or launching. Less deflection in the mount means a failure is less likely. The stock mounts are too soft for these types of driving and it's not uncommon for rubber mounts to break apart, mounting studs to shear off, and for the engine to move around and contact other parts (the radiator for example). Stiffer mounts help prevent these issues as well as giving better engine response, quicker power delivery, and more precise shifting (reducing the chances of a mis-shift). The beauty of the Powerflex tunebale mount is that it can be adapted for changing conditions, unlike other urethane or solid mounts which are either too stiff or not stiff enough. These urethane/aluminum engine mounts are sold as a pair. They replace original BMW part numbers 22111095444, 22116779970, 22116771361, 11811092583, 11812283798, 11817837985, 11812228298, and 11811136542. Fits on all 6-cylinder E36 325i/328i/M3 and E46 323i/325i/328i/330i/M3 (not Xi AWD), and V8 E90/E92 M3.

Show More Show Less

Bosch Flow Matched EV14 Injectors - US CAR Connector (EV6) - 750cc - ...

NOT A DIRECT REPLACEMENT FOR FACTORY INJECTORS - For use with aftermarket port injectio...

T#:36947243

Part#: 501-0028

In Stock

$ 409.99 USD

Add to Wish List

Qty

$ 409.99 USD

Add to Wish List

The Black Market Parts Genuine Bosch Motorsports EV14 fuel injectors featuring USCAR (EV6) connector matched and packaged in a pack of 6 units. Direct plug-in for Motiv Reflex, AIC, and Nexsys Motorsports

Show More Show Less

Universal Oil Cooler Black - 10 Row

T#:31291020

Part#: MMOC10BK

Ships in 3 Business Days

$ 126.99 USD

Add to Wish List

Qty

$ 126.99 USD

Add to Wish List

Universal Oil Cooler Black - 10 Row is engineered to maintain optimal oil temperatures and ensure peak engine performance under various driving conditions. This high-performance oil cooler effectively reduces oil temperatures, preventing a drop in pressure and maintaining proper engine lubrication. Featuring a robust 10-row design, it offers superior cooling efficiency compared to standard coolers.

Efficient Cooling: The 10-row design enhances cooling capacity to manage high oil temperatures effectively.
Durable Construction: Black finish provides durability and resistance to environmental factors.
Optimized Performance: Helps prevent a drop in oil pressure and maintains proper engine lubrication.
Versatile Fitment: Universal design suitable for various vehicles and applications.
Compact Size: Overall dimensions of 12.95" x 3.8" x 1.97" and core dimensions of 11" x 2.76" x 1.97" ensure a good fit in most engine bays.

WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to all companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

HD/Perf Street Sprung

Must be used with ACT Flywheel 601010 or 601015

T#:567299

Part#: BM9-HDSS

In Stock

$ 897.00 USD

Add to Wish List

Qty

$ 897.00 USD

Add to Wish List

This kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability.

Show More Show Less

ECS Tuning Wheel Spacers - 25mm - 72.6mm CB

10X Entries Into Our F80 M3 Sweepstakes

T#:385272

Part#: 001058ECS04-25KT

Ships on Oct 6, 2026

Sale - Save 5% $ 171.99

This product was last offered at the strikethrough price on
06-13-2026

$ 163.39 USD

Add to Wish List

Qty

Sale - Save 5%

$ 171.99

This product was last offered at the strikethrough price on
06-13-2026

$ 163.39 USD

Add to Wish List

Drastically improve the looks of your vehicle while improving your vehicle's handling characteristics and/or easily adjust your wheel fitment to allow for the proper clearance when installing parts such as new wheels, big brake kits, or lowering suspension components.Interference from components such as shocks, springs, or control arms are a common issue when installing wheel that are not a direct OE size replacement. By moving your wheels a few millimeters each, you can give yourself enough clearance for proper wheel fitment and give your car a wider stance in the process.

ECS Tuning wheel spacers are constructed of high quality 6061-T6 aircraft grade aluminum and are specifically designed by in-house engineers and cnc machined to exact standards, ensuring the best fitment possible. By carefully measuring the OEM wheel hubs and bore dimensions, these spacers mount with minimal clearance to prevent any vibration, retaining the stock-like vibration free operation.

ECS Tuning is a performance and genuine parts provider that designs their ECS Tuning branded aftermarket automotive parts in-house to ensure the highest quality and affordability possible. Every part's design is subjected to a rigorous test fit and stress test period to guarantee proper fitment and continued reliability for years to come.

This item fits the following BMWs:

2008-2012 E82 BMW 128i 135 1M
1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
1976-1981 E12 BMW 528i 530i
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi M6
2004-2010 E63 BMW 645ci 650i M6
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Rear Only
2007-2013 E70 BMW X5M
2007-2014 E71 BMW X6 xDrive35i X6 xDrive50i X6M

Show More Show Less

Genuine BMW Terminal Socket Conductor Seal - 0.13-0.35 mm²

T#:140844

Part#: 61138366247

In Stock

$ 1.99 USD

Add to Wish List

Qty

$ 1.99 USD

Add to Wish List

Genuine BMW Rubber Grommt - 0.2mm
This item fits the following BMW Chassis:
E36 M3,E39 M5,E60 M5,E63 M6,E46 M3,E70 X5M,E71 X6M,E82 1M Coupe,E85 Z4M,E53 48IS,E36,E38,E39,E46,E53 X5,E63,E65,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F25 X3,F26 X4,F30,F31,F32,F34,i3i12

Show More Show Less

Universal 10AN ORB To 3/8" Barb

T#:31522993

Part#: RAD20-0530

In Stock

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Heater Control Valve - E46, E39, X3, Z8

2X Entries Into Our F80 M3 Sweepstakes

T#:639296

Part#: 64118369805

Back Ordered

$ 74.99 USD

Add to Wish List

Qty

$ 74.99 USD

Add to Wish List

The HVAC heater control valve regulates the flow of coolant into to the heater core. A faulty heater valve can lead to a cabin that is either does not warm up or is too hot. URO Parts is one of the leading manufacturers of high quality direct replacement aftermarket components, covering a wide range of makes and models. All of their replacement parts are manufactured to ISO 9000 certification standards, so you can expect long lasting performance from URO Parts. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform! This item fits the following BMWs: 1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi 2001-2003 E39 BMW 525i 530i - for cars with auxiliary heating option code S536A 2004-2006 E83 BMW X3 2.5i X3 3.0i 2000-2003 E52 BMW Z8 Roadster

Show More Show Less

Turner Silver BMW 15mm Wheel Spacers and Extended Bolts (Pair) - Most...

10X Entries Into Our F80 M3 Sweepstakes
Includes longer wheel bolts!

T#:567609

Part#: TWH9905015KT1

Back Ordered

Sale - Save 3% $ 184.94

This product was last offered at the strikethrough price on
06-14-2026

$ 179.39 USD

Add to Wish List

Qty

Sale - Save 3%

$ 184.94

This product was last offered at the strikethrough price on
06-14-2026

$ 179.39 USD

Add to Wish List

Our 15mm wheel spacers are lightweight, featuring a durable coating and quick release pockets for easy removal. Longer wheel bolts are included in this kit!

Genuine BMW Front Turn Signal Assembly - Right - E46 323Ci 325Ci 328C...

For vehicles with production date up to 09/2001

T#:360547

Part#: 63126904308

In Stock

6% off MSRP $ 81.52

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 76.71 USD

Add to Wish List

Qty

6% off MSRP

$ 81.52

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 76.71 USD

Add to Wish List

Front Sway Bar End Link - Priced Each

2X Entries Into Our F80 M3 Sweepstakes

T#:361979

Part#: 31351095694

Ships in 1 Business Day

$ 12.99 USD

Add to Wish List

Qty

$ 12.99 USD

Add to Wish List

Includes hardware

Genuine BMW Touch Up Paint Stick - Melbourne Red Metallic (A75) ...

T#:5122271

Part#: 51910427997KT

In Stock

$ 44.99 USD

Add to Wish List

Qty

$ 44.99 USD

Add to Wish List

This paint is a perfect match for the BMW Melbourne Red Metallic, paint code A75. Includes. Base Coat 12ml Clear Coat 12ml

Genuine BMW Cable Holder - 61138362786

T#:140747

Part#: 61138362786

In Stock

$ 4.99 USD

Add to Wish List

Qty

$ 4.99 USD

Add to Wish List

Genuine BMW Cable Holder
This item fits the following BMW Chassis:
E60 M5,E46 M3,E82 1M Coupe,E53 48IS,E46,E53 X5,E82,E83 X3,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F30,F31,F32,F34,i3i12

Show More Show Less

Drive Shaft Wrench

T#:5189118

Part#: AGA-DSW-50

Ships in 7 Business Days

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

This tool is a must to properly disconnect the driveshaft.

3.5" Eraser Wheel With Arbor Adapter

T#:3957501

Part#: CTA1010

In Stock

$ 12.48 USD

Add to Wish List

Qty

$ 12.48 USD

Add to Wish List

3.5" diameter wheel quickly and cleanly removes pinstripes, decals, adhesive and double-faced tape from vehicle surfaces

Genuine BMW B Pillar Cover - Right - E46 323Ci 325Ci 328Ci 330Ci M3 ...

For coupe models only with production date from 12/2001

T#:103344

Part#: 51437065366

Ships in 1 day

$ 300.76 USD

Add to Wish List

Qty

$ 300.76 USD

Add to Wish List

Plastic fades and wears out over time. Get your interior looking like brand new with this simple replacement for your worn out B-Pillar cover.

Genuine BMW Right Upper Column A Cover Its - Schwarz
This item fits the following BMW Chassis:
E46 M3,E46

Show More Show Less

Genuine BMW Support 61668374371

T#:10755

Part#: 61668374371

In Stock

$ 4.99 USD

Add to Wish List

Qty

$ 4.99 USD

Add to Wish List

Genuine BMW Support
This item fits the following BMW Chassis:
E30 M3,E63 M6,E46 M3,E82 1M Coupe,E85 Z4M,E53 48IS,E30,E36,E46,E53 X5,E63,E65,E82,E83 X3,E85 Z4,E86 Z4

Foxwell Universal Programable TPMS Sensor - Rubber - Set Of Four ...

10X Entries Into Our F80 M3 Sweepstakes

T#:51637532

Part#: T20-RKT

In Stock

Sale - Save 25% $ 103.99

This product was last offered at the strikethrough price on
05-03-2026

$ 77.97 USD

Add to Wish List

Qty

Sale - Save 25%

$ 103.99

This product was last offered at the strikethrough price on
05-03-2026

$ 77.97 USD

Add to Wish List

The Foxwell T20 TPMS sensor integrates both 315 MHz and 433 MHz frequencies, replacing more than 99% of OEM direct TPMS sensors on the market. The all-new, high-precision air valve prevents air leakage and provides a durable seal - an upgrade over the outgoing T10. Its proprietary sensor body features a long-lasting, lightweight 3V battery and supports unlimited wireless programming. Sensors can be easily activated and programmed using the Foxwell T2000 TPMS Service Tool (T#36811799).

Features:

Rubber valve stem Supports 315MHz and 433MHz frequencies High-precision air valve to avoid air leakage 0-30° adjustability Built-in battery with an extended service life (more than 5 years) Temperature reading range of -40°F to 257°F Pressure monitoring range of 0 to 130.53 psi 12G weight

Show More Show Less

Foaming Glass Cleaner - 19oz

T#:641241

Part#: 10998KT

In Stock

$ 6.99 USD

Add to Wish List

Qty

$ 6.99 USD

Add to Wish List

This cleaner foams on contact, allowing the solution to stay on the glass surface longer as it loosens dirt, grime, and bug splats.

Suspension Reinforcement Kit

For coupe models only

10X Entries Into Our F80 M3 Sweepstakes

T#:5416754

Part#: 51717036781TMSKT

In Stock

Sale - Save 16% $ 265.00

This product was last offered at the strikethrough price on
04-03-2026

$ 221.81 USD

Add to Wish List

Qty

Sale - Save 16%

$ 265.00

This product was last offered at the strikethrough price on
04-03-2026

$ 221.81 USD

Add to Wish List

Includes RTAB limiter, rear shock tower reinforcement plates and BMW Strut tower plates. If you already upgraded your suspension but are looking for the finishing touch, this kit is what you need. The BMW front strut mount reinforcement plates reduce the risk of the shock tower mushrooming and cracking. The rear shock mount reinforcement plates reduce the risk of the rear shock mount area tearing and deforming. The Delrin rear trailing arm bushing limiters reduce the movement that the RTAB's can make resulting in a tighter rear suspension and with less moment prolongs the bushing life.

Show More Show Less

Liqui Moly Synthoil Premium Engine Oil (5w-40) - Case Of 12

10X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!

T#:588074

Part#: 2040/12KT

In Stock

$ 202.99

This product was last offered at the strikethrough price on
04-20-2026

$ 154.99 USD

Add to Wish List

Qty

$ 154.99 USD

Add to Wish List

Synthoil Premium Engine Oil (5w-40) - Case Of 12

Ensure optimal performance and protection for your BMW engine with the Synthoil Premium Engine Oil (5w-40) - Case Of 12. Crafted to meet the high demands of modern engines, this engine oil is a top-tier synthetic blend that offers superior lubrication and engine cleanliness. With a carefully formulated composition, it provides outstanding wear protection, maintains stability under extreme temperatures, and minimizes deposits, promoting engine longevity and efficiency.

Key Benefits:

Superior engine protection and lubrication
Maintains stability in extreme temperatures
Minimizes engine deposits for cleaner operation
Ensures outstanding wear protection for engine components
Promotes engine longevity and efficiency

Show More Show Less

Genuine BMW 10W-60 Engine Oil & Oil Storage Bag Combo - S54 S62 S65 S...

T#:384295

Part#: 83292158848KT

In Stock

$ 22.99 USD

Add to Wish List

Qty

$ 22.99 USD

Add to Wish List

APEX ARC-8 17x9" ET42 Hyper Black Wheel 17.2lbs

2X Entries Into Our F80 M3 Sweepstakes

T#:180800

Part#: ARC8179ET42HBK

Ships on Oct 1, 2026

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

17x9" ET42 Hyper Black APEX ARC-8 Wheel 17.2lbs

Wheel Specs
Fitment:	Front or Rear
Size:	17x9.0"
Offset (mm):	42
Weight (lbs):	17.2
Profile:	Flat, not concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. This is an excellent wheel for SpecE46 (SE46). The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

Genuine BMW Set Of Mounted Parts, Bumper, Front - Value Line - 511122...

T#:223116

Part#: 51112293996

In Stock

$ 65.81 USD

Add to Wish List

Qty

$ 65.81 USD

Add to Wish List

Genuine BMW Set Of Mounted Parts, Bumper, Front - Value Line

This item fits the following BMW Chassis:
E46,

E46 M3 Red Line Transmission & Differential Oils

T#:3547

Part#: E46M3-REDLINE

In Stock

$ 91.99 USD

Add to Wish List

Qty

$ 91.99 USD

Add to Wish List

We have been using Red Line Oil in our street cars and race cars for years. Hands-down, it is the Number One brand of high performance lubricant for BMWs. We put Red Line Oil in our 80,000 mile street M3 and noticed smoother shifts, especially on 1-2 and 2-3 shifts. Also, our short shift kit is less notchy! For our E46 M3 racecars we used RedLine in the transmission and diff. Some of our races can go as along as 6 hours and we're happy report outstanding results. To clear up any confusion this package is what we recommend for the E46 M3. Not only do we not believe in 'lifetime' fluids, we believe that Red Line fluid will give you smoother shifts and as good or better protection for your transmission and diff internals than the factory fluids (factory fluid is also not available in a quart-sized container - we've tried).This package includes two quarts of ATF D4 and two quarts of 75/140.

Show More Show Less

Genuine BMW Rear Anti-Rattle Spring - E39 M5, E46 M3, E60 M5, E63/64 ...

T#:360926

Part#: 34212282198

In Stock

8% off MSRP $ 24.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 22.99 USD

Add to Wish List

Qty

8% off MSRP

$ 24.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 22.99 USD

Add to Wish List

Anti-rattle springs secure the brake pad in a fixed position inside the caliper, preventing excess noise.

Ohlins Road And Track DFV Coilovers - E46 M3

T#:404004

Part#: BMSMI30

Ships in 7 Business Days

$ 3,277.99

This product was last offered at the strikethrough price on
07-23-2026

$ 3,000.00 USD

Add to Wish List

Qty

$ 3,000.00 USD

Add to Wish List

Ohlins Racing has a long history dating back to 1976 of providing premium motorcycle and automotive suspension systems to numerous racing teams, individual racers, and OE brands such as BMW Motorsport, Audi, Lamborghini. Pagani, Ducati and Kawasaki. Over time, thanks to extensive R&D, testing, and tuning, their products have evolved into some of the highest quality suspension systems in the world, providing years of flawless operation on both the street and the track. Ohlins' latest automotive suspension system, the DFV (Dual Flow Valve) Road and Track Coilover Kit, has bridged the gap between comfortable stock suspension and track focused coilover kits. These kits provide a ride that glides over typical bumps and dips in the road, all without the typical hard rattle and harsh feel of usual coilovers, and turn in tight and maintain tire grip and traction in corners significantly better than stock suspension ever could. This is all thanks to the spring rate chosen and Ohlins and their signature Dual Flow Valve. The DFV maintains comfort and agility by giving the same characteristics for both rebound and compression, allowing the wheel and tire to maintain constant contact with the road/track for maximum control. The Dual Flow Valve works by controlling shock fluid flow based on resistance and impact velocity. This is controlled in both compression and rebound, giving the quick shock operation that helps maintain traction. At low shaft travel speeds, oil flows mostly through the shaft jet bleed. At higher shaft speeds, oil flows mostly through the compression/rebound ports in the piston. At very high shaft speeds, or during sudden accelerations from potholes or large bumps in the road, oil can then escape through the ports in the DFV, absorbing a large amount of energy that would otherwise throw off the balance and control of the vehicle and keeping the tire planted firmly on the ground. With all three compression and rebound ports working together according to pressure and shaft speed, the result is the notorious premium suspension feel that only Ohlins can offer. In addition to managing the rebound and compression control, coilovers must also properly address heat changes in the shock oil. As the shock is pushed harder and longer, the oil quickly heats up due to friction and compression, and the oils flow characteristics change. The hotter the oil is, the easier it is for it to travel through ports and valves. To prevent this typical fade in control, Ohlins has implemented a temperature controlled needle bleed valve system that will expand as temperatures rise, slowly increasing restriction in the fluids flow through the valve gap. This produces a consistent dampening rate that maintains the vehicle's suspension characteristics lap after lap, turn after turn, no matter how hard you push your suspension's capabilities. Features: DFV (Dual Flow Valve) Adjustable ride-height Fully rebuildable Corrosion salt spray tested (ISO 9227) Includes hardware and installation instructions 2 year Limited Warranty Specs: Front Spring Rating: 400 lbs/in ( 7 kg/mm) Rear Spring Rating: 630 lbs/in ( 11 kg/mm)

Show More Show Less

Oil Filter Socket 32mm

T#:5269518

Part#: 367132D

Back Ordered

6% off MSRP $ 17.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.95 USD

Add to Wish List

Qty

6% off MSRP

$ 17.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.95 USD

Add to Wish List

Make oil filter housing removal simple

1 Gallon Methanol Tank - Clear/White

T#:558165

Part#: 1G-MT-CL

In Stock

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

Genuine BMW Hood Strut - E46 M3

T#:360954

Part#: 51237893236

Ships in 2 Business Days

2% off MSRP $ 94.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 92.99 USD

Add to Wish List

Qty

2% off MSRP

$ 94.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 92.99 USD

Add to Wish List

Genuine BMW Screw On Cap - CHF 11S

T#:7886

Part#: 32416851332

In Stock

4% off MSRP $ 22.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.99 USD

Add to Wish List

Qty

4% off MSRP

$ 22.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.99 USD

Add to Wish List

Genuine BMW Cover - Chf 11.S
This item fits the following BMW Chassis:
E36 M3,E46 M3,E85 Z4M,E53 48IS,E36,E39,E46,E53 X5,E63,E82,E83 X3,E85 Z4,E86 Z4,E90,E92,E93

Glacier Silver Metallic Touch Up Paint Stick - A83

This item is classified as Hazardous Materials and requires special shipping and handling. We cannot ship this item out of the US or with priority shi

T#:600182

Part#: 51910429328KT

Ships in 2 Business Days

$ 44.99 USD

Add to Wish List

Qty

$ 44.99 USD

Add to Wish List

Genuine BMW Windshield Washer Hose - Multiple BMWs

T#:145055

Part#: 61668362762

In Stock

7% off MSRP $ 14.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 13.99 USD

Add to Wish List

Qty

7% off MSRP

$ 14.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 13.99 USD

Add to Wish List

Connects the washer pump to exterior nozzles.

Genuine BMW Hose Line
This item fits the following BMW Chassis:
E39 M5,E63 M6,E46 M3,E82 1M Coupe,E85 Z4M,E53 48IS,E39,E46,E53 X5,E63,E65,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90

Show More Show Less

Powerflex BMW E36 & E46 3 Series, Z4, X3 Rear Lower Control Arm Inner...

T#:34549555

Part#: PFR5-4616H

In Stock

$ 119.99 USD

Add to Wish List

Qty

$ 119.99 USD

Add to Wish List

The Powerflex Rear Lower Control Arm Inner Bushing for BMW E36 and E46 3 Series, Z4, and X3 is designed to provide a significant upgrade over the factory rubber bushings. By using high-performance polyurethane, these bushings enhance the stability, responsiveness, and overall performance of the rear suspension system.

Key Benefits:

Enhanced Handling Performance: The stiffer polyurethane material reduces flex and improves the rigidity of the rear control arm, resulting in better handling and stability during cornering and aggressive driving maneuvers.
Durability and Longevity: Unlike standard rubber bushings, these polyurethane bushings are engineered to withstand wear from road debris, oil, and temperature fluctuations, ensuring they maintain performance over time.
Improved Steering Feedback: With reduced movement and play in the rear suspension, these bushings provide a more direct connection to the road, enhancing steering responsiveness and driver control.
Precision Fitment: Specifically designed for BMW E36 and E46 3 Series, Z4, and X3 models, these bushings ensure an accurate fit and easy installation, making them a straightforward upgrade for enthusiasts.

These bushings are ideal for BMW owners looking to improve the handling dynamics and durability of their vehicle’s rear suspension, suitable for both daily driving and performance-oriented applications.

.

Show More Show Less

Liqui Moly Leather Care - 250 ml

10X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!

T#:587532

Part#: 20394

In Stock

9% off MSRP $ 15.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 14.49 USD

Add to Wish List

Qty

9% off MSRP

$ 15.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 14.49 USD

Add to Wish List

Protects smooth leather from becoming brittle. Cleans and maintains. Excellent leather care lotion for auto, riding suit and household. Smooth leather regains its suppleness and good feeling. Manufactured from various waxes and other carefully selected care products. Application: If required, clean the leather surfaces to be treated and let dry. Shake Leather Care vigorously before use. Next, pour onto a soft cloth or rag and, using circular motions, apply thinly and uniformly under light pressure. Polish off after briefly allowing it to work. Regular application will result in the optimum care and appearance. Not suitable for suede. Before application on the entire area, we suggest that you check Leather Care for compatibility with the material on a hidden area.

Show More Show Less

Genuine BMW Power Steering Hose - Z4 S54 3.2L E46 S54 3.2L

T#:12726

Part#: 32412229369

In Stock

7% off MSRP $ 193.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 55.99 USD

Limited Qty Sale

Add to Wish List

Qty

7% off MSRP

$ 193.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 55.99 USD

Limited Qty Sale

Add to Wish List

Genuine BMW Intake Manifold
This item fits the following BMW Chassis:
E46 M3,E85 Z4M,E46,E85 Z4,E86 Z4

300V 5w40 "Competition" - 2 Liters

T#:13957881

Part#: 110817

Ships in 2 Business Days

$ 63.68 USD

Add to Wish List

Qty

$ 63.68 USD

Add to Wish List

Use for Endurance/Rally/ GT/ Historic racing 100% synthetic racing motor oil based on ESTER Core® technology. Through technical partnerships with most prestigious Teams of car racing, MOTUL has developed a wide range of lubricants for Racing and Sport cars. The 300V motorsport line improves performance of the latest generation engines along with high protection against wear, oil pressure drop and oxidation due to high temperature. Power & engine protection. Medium to high engine dilution. Color: Visual Orange Viscosity grade SAE J 300 5W-40 Density at 20°C (68°F) ASTM D1298 0.850 Viscosity at 40°C (104°F) ASTM D445 78.7 mm²/s Viscosity at 100°C (212°F) ASTM D445 13.5 mm²/s HTHS viscosity at 150°C (302°F) ASTM D4741 4.0 mPa.s Viscosity Index ASTM D2270 176.0 Pour point ASTM D97 -48.0 °C / -54.0 °F Flash point ASTM D92 234.0 °C / 453.0 °F

Show More Show Less

BMW E46 Master LED Interior Lighting Kit - Convertible

10X Entries Into Our F80 M3 Sweepstakes

T#:373526

Part#: E46CONVLED

In Stock

Sale - Save 50% $ 82.99

This product was last offered at the strikethrough price on
05-02-2026

$ 41.50 USD

Add to Wish List

Qty

Sale - Save 50%

$ 82.99

This product was last offered at the strikethrough price on
05-02-2026

$ 41.50 USD

Add to Wish List

Upgrade the interior lighting of your BMW E46 Convertible with the BMW E46 Master LED Interior Lighting Kit. This comprehensive kit is designed to replace all interior lights with high-quality LED bulbs, providing superior illumination and a modern look to your vehicle's interior. Engineered specifically for BMW E46 Convertible models, this kit offers easy installation and long-lasting performance. Enhance the ambiance and functionality of your BMW with this premium LED interior lighting kit.