Showing 8319 results for ""

Sort By:

Mishimoto - Corporate Logo
T#:51075071
Part#: MMIG-BMW-0706
Ships in 3 Business Days
New Item
$ 204.99 USD
Free Shipping on orders $49 and up
The Mishimoto Ignition Coil focuses on durability and electrical precision.
California Duster - Corporate Logo
T#:580176
Part#: 96630
Ships in 10 Business Days
$ 11.99 USD
Free Shipping on orders $49 and up
Featuring a unique "fork" design that closes around spokes: get two sides at once!

Suvneer Wheel Hanger - M12 X 1.25 - Blue
Specifically for vehicles using M12 x 1.25 wheel bolts
Suvneer - Corporate Logo
T#:51356105
Part#: WHLHGR-12125-BL
Ships in 5 Business Days
New Item
$ 17.00 USD
Free Shipping on orders $49 and up
$ 17.00 USD
Free Shipping on orders $49 and up
The Suvneer Motorsports™ Wheel Hanger is the "third hand" you need in your trunk or toolbox.

Powerflex - Corporate Logo
T#:54352784
Part#: PFF5-4634
Ships in 1 Business Day
New Item
$ 53.99 USD
$ 53.99 USD
Secure your shift gate alignment under high track loads. This 95A durometer polyurethane bushing replaces the flimsy factory oval rubber, eliminating shifter arm flex for fast, positive gear engagement.
Show More Show Less
EBC - Corporate Logo
T#:24876363
Part#: BBK045YEL-1
Ships in 1 Business Day
$ 3,167.99 USD
$ 3,167.99 USD
EBC Brakes Racing’s Apollo Big Brake Kits represent the ultimate upgrade when it comes to improving stopping power. Complete with stunning, British-engineered six-piston calipers and all the hardware you need to completely replace all equivalent components of the front axle of your vehicle's stock braking system, these complete kits give a firmer and more responsive brake pedal feel and allow you to drive much longer without the onset of brake fade. Apollo Big Brake Kits are also supplied with front braided brake lines and high-performance fluid, ensuring a brake upgrade that delivers maximum braking performance. These kits are now available for one of the most acclaimed sports cars of the last two decades: the E46-shape BMW M3–a car that is still an extremely common sight at racetracks and B-roads around the world. Apollo-Series 6-Piston Calipers Key features: EBC’s lightweight-yet-strong aluminum 6-piston brake caliper Two-piece bolted design that incorporates high-tensile 12.9-grade steel bolts for reinforcement of the caliper bridge section (computer FEA analysis shows that this offers significant improvements in caliper stiffness compared to a monobloc design) Machined from heat-treated low-pressure castings (this offers a performance advantage over conventional gravity cast calipers, exhibiting higher overall strength and a comparable caliper body stiffness to forging) High-temperature fluid seals coupled with full boot-type dust seals give maximum protection against road grime and debris Lightweight, hard-anodized aluminium staggered pistons with serrated/castellated piston noses that reduce heat transfer into the braking hydraulics Every single brake caliper pressure tested to 2,500psi-Full stainless-steel hardware and fittings, providing durability and longevity – this caliper will never rust Uses standard pad shapes, giving choice when selecting brake pads Rather than a powder-coated finish, all Apollo calipers use an advanced high-temperature Teflon™ polyester coating process to ensure they look great for much longer. Currently available in Stealth Black, Storm Shadow Blue, Luminous Yellow and Racing Red Fully-Floating Two-Piece Rotors Key features: Fully-floating 355x32mm two-piece rotors that allow the outer ring to expand freely in response to heat (this reduces stress which in turn extends rotor life and reduces the tendency for rotor cracking during extreme use) Drive bobbins machined from a single piece of stainless steel giving maximum strength and corrosion resistance (this reduces maintenance requirements and ensures the outer ring continues to float freely over time) Rotor rings feature 48 directional internal curved vanes for improved cooling Unique ‘Swept Groove’ slot design for effective evacuation of braking dust and gases whilst ensuring good initial bite on brake application Now featuring the latest thermic black corrosion-resistant finish–the very latest in rust prevention Bluestuff™ NDX Performance Brake Pads Key features: Every EBC 6-piston Apollo Big Brake Kit is supplied with EBC Bluestuff™ NDX pads for the front axle Now road legal in most markets, Bluestuff™ NDX combines excellent cold bite with the capability to perform well in short spells of track/race conditions Stainless Steel Braided Brake Lines Key features: Every kit is supplied with EBC Brakes’ stainless-steel braided brake lines for the front axle Every hose has a stainless-steel braided exterior that prevents a phenomenon known as ‘ballooning’, this braided exterior prevents the spongey feel of OE rubber lines and provides greater precision and feel under braking Super DOT 4 Brake Fluid Key features: Every kit is supplied with 1 liter of BF307+ super DOT 4 brake fluid. This fluid has a 310°C boiling point – a significantly higher boiling point than standard DOT 5.1 fluid Having such a high boiling point gives the braking system exceptional endurance, allowing you to push hard for extended periods without heat soak causing the fluid to boil and resulting in fade ABOUT EBC BRAKES Still privately owned, EBC Brakes is a world leader in the manufacture of rotor brake components. Expanding rapidly in the automotive industry, EBC Brakes has become a world leader in sport, high-performance and race brake pads and rotors with a massive range of products. EBC is proud that all its brake pad materials are completely free from heavy metals and sulphides, making them eco-friendly. EBC Brakes produces 100% of its automotive brake pad range in its Bristol factory in the UK. ABOUT EBC BRAKES RACING Formed in 2015 as a response to the ever-expanding track day and race car markets, EBC Brakes Racing is a sub-division of world-leader in the industry, EBC Brakes. With modern vehicles becoming increasingly heavy, coupled with ever-higher power outputs, the demand placed on the braking system today is higher than ever. As such, EBC Brakes Racing was born: aiming to offer uncompromised braking products of the finest quality that offer unparalleled levels of performance. Several million pounds have already been invested into the development of EBC Brakes Racing’s British-built range of products, which includes the likes of RP-1/RP-X pads, Apollo Big Brake Kits and fully-floating two-piece rotors. EBC Brakes Racing provides car enthusiasts around the world with quality, UK-made parts at competitive prices, whilst staying true to its mantra of developing braking products that offer unparalleled levels of performance. 2023 marks the 40th anniversary of the EBC Brakes Group – a milestone that will be celebrated throughout the year by the company and its 400+ dedicated staff. Four decades on, EBC Brakes is immensely proud to remain privately owned and British-based, still acting as a world-leader in the braking industry.
Show More Show Less

18" APEX EC-7R Square Wheel Set - Silver
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:590565
Part#: EC7R181033SKT
Ships in 5 Business Days
$ 2,936.00 USD
Free Shipping
$ 2,936.00 USD
Free Shipping
The next evolution in APEX wheels features fully forged construction for a wheel that is both lighter, and stronger. 18x10 ET33 72.5CB
18" APEX ML-10RT Forged Wheels - Staggered Set Of Four
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:31788321
Part#: ML1018952120AKT1
Ships in 5 Business Days
$ 2,996.00 USD
$ 2,996.00 USD

Supersprint - Corporate Logo
T#:14419812
Part#: 044022
Ships on Oct 23, 2026
$ 1,360.99 USD
Free Shipping
$ 1,360.99 USD
Free Shipping

APEX Wheels - Corporate Logo
T#:180748
Part#: EC71885ET35RS
Ships in 5 Business Days
$ 389.00 USD
$ 389.00 USD
18x8.5" ET35 Race Silver APEX EC-7 Wheel 20.10lbs
Wheel Specs
Fitment:Front or Rear
Size:18x8.5"
Offset (mm):35
Weight (lbs):20.1
Profile:1, minimal dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
APEX EC-7 19x10" ET25 Satin Black Wheel 23.5lbs
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201371
Part#: EC71910ET25SMBK
Ships in 5 Business Days
$ 469.00 USD
Free Shipping
$ 469.00 USD
Free Shipping
19x10" ET25 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x10"
Offset (mm):25
Weight (lbs):23.5
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
ESOTERIC Car Care - Corporate Logo
T#:41998823
Part#: ESO.WHEEL.32
Ships in 1 day
$ 25.99 USD
Free Shipping on orders $49 and up
A wheel cleaner with better ability to remove iron particles from your brake pads and rotors that also cleans dirt and debris from the road. Esoteric Wheel Cleaner has a more active chemical than traditional iron wheel cleaners for better ability to clean wheels with caked on brake dust.
Show More Show Less


19" APEX SM-10 Square Wheel Set - Anthracite
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:558585
Part#: SM10199ANKT
Ships in 5 Business Days
$ 1,936.00 USD
Free Shipping
$ 1,936.00 USD
Free Shipping

Upgrade your BMW with APEX wheels, renowned for their superior strength and lightweight construction achieved through the innovative Flow-formed semi-forging process. These wheels boast an impressive average weight reduction of 10lbs or more, enhancing performance by reducing unsprung weight. Engineered with spacious spoke and barrel design, they provide ample room for brake systems while maintaining a classic motorsports aesthetic that perfectly complements the aggressive BMW style. With APEX wheels, your BMW will not only look its best but also perform with confidence on the road.

  • Enhanced strength and lightweight performance
  • Innovative Flow-formed semi-forging process
  • Average weight reduction of 10lbs or more
  • Ample room for brake systems
  • Classic motorsports design matches BMW's aggressive style
Show More Show Less
Rennline - Corporate Logo
T#:28637274
Part#: I77.86.BBL
Ships in 5 Business Days
$ 450.00 USD
Free Shipping on orders $49 and up

Upgrade the steering wheel of your BMW or MINI with the Rennline Leather Steering Wheel - Black Spokes & Black Horn Ring. This leather steering wheel features black spokes and a black horn ring, adding a sleek and stylish touch to your vehicle's interior. Engineered for durability and comfort, this steering wheel provides a comfortable grip and precise control. Elevate the driving experience of your BMW or MINI with this premium leather steering wheel.

  • Sleek and stylish design with black spokes and horn ring
  • Engineered for durability and comfort
  • Provides a comfortable grip for enhanced driving experience
  • Compatible with both BMW and MINI models
Show More Show Less
WeatherTech - Corporate Logo
T#:31622583
Part#: 8LTC43K
Ships in 2 Business Days
$ 15.99 USD
Free Shipping
$ 15.99 USD
Free Shipping

Burger Motorsports - Corporate Logo
T#:41255923
Part#: BMSJB4LOGO
Ships on Aug 7, 2026
$ 10.00 USD
Free Shipping on orders $49 and up

19" APEX ARC-8RT Square Wheel Set - Choose Your Finish!
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:40342931
Part#: ARC8RT19930
Back Ordered
Starting at $ 3,236.00 USD
Starting at $ 3,236.00 USD
Apex ARC-8RT 19x9" ET30 Square Wheel Set Introducing the Apex ARC-8RT, part of our Touring Line of forged wheels. A timeless classic, reborn as a fully forged wheel. Fully forged 6061-T6 aluminum Reinforced Sprint™ spec inner lip Stronger, yet thinner spokes Deeper concave profile Improved brake clearance OEM center cap compatibility Unmatched replacement program Lifetime structural warranty Independently tested *Aftermarket wheels above stock sizes may require certain amounts of fitment modification to prevent damage to the wheel or interior wheel well components. Fender rolling, spacers, or camber adjustment may be necessary for perfect fitment.
Show More Show Less

Sunex - Corporate Logo
T#:386187
Part#: 1006D
Ships in 6 Business Days
$ 306.99 USD
$ 306.99 USD
These jack stands have steel base pads for superior stability
Hawk - Corporate Logo
T#:25011
Part#: TMS25011
Ships on Aug 10, 2026
$ 374.99 USD
Free Shipping
$ 374.99 USD
Free Shipping
The Hawk DTC (Dynamic Torque Control) compound offers the highest friction coefficient of any Hawk pad. The DTC pads offer extremely high torque with aggressive controllable initial bite, superior release and torque control characteristics.
Featuring:
  • High Intial Bite
  • Consistent torque over all pressures
  • Operating Range:400-1600°F; 204-871°C
  • High Temp & High Torque
  • Provides Superior Pad and Disc Wear
  • Excellent Torque Control
  • Excellent Modulation and Release Characteristics
  • Designed for High Deceleration Rates.

    These Front Hawk DTC-70 Brake Pads fit the following BMWs:
    2001-2005 E46 BMW 330i 330Ci 330xi
    2003-2006 E46 BMW M3
    2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
    2006-2008 Z4 BMW Z4 3.0si
    2003-2009 Z4 BMW M Roadster & M Coupe (S54)
  • Show More Show Less

    19" APEX SM-10 Square Wheel Set - Pick Your Finish
    2X Entries For Our G87 M2 Sweepstakes!
    APEX Wheels - Corporate Logo
    T#:19858302
    Part#: SM101995ET28Q
    Ships in 5 Business Days
    Starting at $ 1,976.00 USD
    Free Shipping
    Starting at $ 1,976.00 USD
    Free Shipping
    19x9.5" ET28 APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
    Show More Show Less

    Meistersatz - Corporate Logo
    T#:379629
    Part#: 24101423380
    Ships in 3 Business Days
    $ 10.99 USD
    Free Shipping on orders $49 and up
    Seal up your leaking oil pan
    Schumacher - Corporate Logo
    T#:383699
    Part#: SHUSP200
    Ships in 6 Business Days
    $ 49.99 USD
    Free Shipping on orders $49 and up
    Charge/maintain your 12 volt battery with sunshine
    Hawk - Corporate Logo
    T#:45073873
    Part#: HB464C.764
    Ships on Aug 10, 2026
    10% off MSRP $ 281.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 253.99 USD
    Free Shipping on orders $49 and up
    10% off MSRP
    $ 281.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 253.99 USD
    Free Shipping on orders $49 and up
    Hawk HPX pads give you the smooth bite and repeatable braking control Autocross demands. Consistent, predictable, and built to help you stay fast between the cones.


    ECS - Corporate Logo
    T#:7068742
    Part#: 043319LA020-38KT
    Ships on Aug 21, 2026
    Sale - Save 3% $ 189.99

    This product was last offered at the strikethrough price on
    06-14-2026

    $ 184.28 USD
    Free Shipping on orders $49 and up
    Sale - Save 3%
    $ 189.99

    This product was last offered at the strikethrough price on
    06-14-2026

    $ 184.28 USD
    Free Shipping on orders $49 and up
    Burger Motorsports - Corporate Logo
    T#:21176934
    Part#: BMS-WMI-SOL
    Ships on Aug 7, 2026
    $ 75.00 USD
    Free Shipping on orders $49 and up
    This solenoid safely stops fluid from flowing into your intake system when WMI is not in use. The solenoid features two 1/8 NPT ports with included compression 1/4 in. hose fittings for a quick leak-free connection. The included filter keeps dirt and debris out of your engine.
    Show More Show Less
    Hawk - Corporate Logo
    T#:583976
    Part#: HB122R.710
    Ships on Aug 10, 2026
    $ 322.99 USD
    Free Shipping
    $ 322.99 USD
    Free Shipping

    18" APEX SM-10RE Staggered Wheel Set - Satin Black
    2X Entries For Our G87 M2 Sweepstakes!
    APEX Wheels - Corporate Logo
    T#:40478167
    Part#: 10RE181011SBKT
    Ships in 5 Business Days
    $ 2,956.00 USD
    $ 2,956.00 USD
    Apex SM-10RE ​18x10" ET25 & 18x11" ET44 Staggered Wheel Set The SM-10RE is the forged Enduro version of our popular SM-10 design. It features our highest load rating and our strongest lip, allowing it to withstand abuse, lap after lap. Upgrade the appearance and reduce the weight of your BMW with Apex's SM-10RE wheels! Features: Fully forged 6061-T6 aluminum Stronger 2100 lb. load rating Stiffer side-milled spokes Heavy-duty Enduro Spec inner lip Capless hub design to reduce weight Massive brake clearance Unmatched replacement program Lifetime structural warranty Independently tested Retaining the same ten-spoke layout seen on the Flow Formed SM-10 and ultra light Forged SM-10RS, the all-new Forged SM-10RE gets dramatically thicker spokes, our thickest ever Enduro Spec inner lip, and a fully redesigned and reinforced outer lip. All said and done, the SM-10RE is rated at an impressive 2100 lb max load, a five-hundred pound increase over the lightweight SM-10RS. These fortifying measures have been countered with a number of unique weight-saving features as well. Just like the Sprint Line Forged Wheels, the Enduro Line SM-10RE sports deep spoke scalloping intended to machine away excess material without decreasing strength or stiffness. Going a step further, the SM-10RE does away with the center cap support, the outer barrel remains unpainted, showcasing a beautiful raw aluminum, and outer lip pocketing is present between the spokes (an Apex first!). All together, these weight-saving features result in a wheel that is shockingly light considering its impressive stiffness and load rating. The SM-10RE is significantly stronger and stiffer compared to both its Sprint Line and Flow Formed counterparts, and even more so than most competitors. The intention is for the Enduro SM-10RE to become the new de facto wheel of choice for track day enthusiasts and racers looking for a ten-spoke wheel design. For racers, track day goers and car enthusiasts in general who won’t put up with overly light wheels that bend at the sight of steep curbing, the SM-10RE is the answer!
    Show More Show Less

    18" APEX ML-10RT Forged Wheels - Staggered Set Of Four
    2X Entries For Our G87 M2 Sweepstakes!
    APEX Wheels - Corporate Logo
    T#:31788315
    Part#: ML1018952120GKT1
    Ships in 5 Business Days
    $ 2,996.00 USD
    $ 2,996.00 USD
    AGA Tools - Corporate Logo
    T#:42638595
    Part#: AGA-JR-14-24
    Ships in 7 Business Days
    $ 140.99 USD
    Free Shipping on orders $49 and up
    Transform your floor jack into a reliable, stable jack stand with the AGA Jack Rod Stand XL.

    Race German - Corporate Logo
    T#:6843904
    Part#: RGGOPDCMTS
    Ships in 2 Business Days
    $ 37.99 USD
    Free Shipping on orders $49 and up
    Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. Race German's dual GoPro camera mount is the perfect pair to their Aluminum mount! This allows for two cameras to be mounted simultaneously. This dual camera mount starts off as one piece of aluminum and is CNC'd milled down and then anodized black to match. An excellent choice for getting footage from the front and rear of the car at the same time! *Includes thumbscrews
    Show More Show Less
    Powerflex - Corporate Logo
    T#:54281608
    Part#: PFR5-4609-21.5H
    Back Ordered
    New Item
    $ 57.99 USD
    $ 57.99 USD
    In high-performance stage and track environments, chassis deflection is the enemy of precision. The Powerflex Heritage Collection is engineered specifically for enthusiasts and restorers who demand modern, track-level suspension dynamics without compromising the classic aesthetic of a vintage or modern-classic cockpit.
    Show More Show Less

    BBS - Corporate Logo
    T#:26471665
    Part#: SX0303SKKT
    Ships on Aug 7, 2026
    $ 1,489.00

    This product was last offered at the strikethrough price on
    07-02-2026

    $ 1,435.99 USD
    $ 1,435.99 USD

    Elevate your BMW's appearance and performance with the BBS SX wheels, a premium option renowned for its sophisticated design and high-performance attributes. These wheels feature a timeless multi-spoke design, offering a perfect fusion of style and functionality. Crafted using advanced manufacturing processes and top-quality materials like forged aluminum alloy, the SX wheels are lightweight yet incredibly robust, enhancing both the aesthetics and handling characteristics of vehicles. Popular among automotive enthusiasts, the SX series caters to drivers seeking to elevate the appearance and performance of their cars. With their combination of elegant aesthetics and precision engineering, BBS SX wheels stand as a top choice for drivers who prioritize both style and performance in their wheel selection.

    • Sophisticated design enhances vehicle aesthetics
    • Lightweight construction improves vehicle performance
    • Robust build ensures durability
    • Precision engineering enhances handling

    Specs:

    • Size: 17"x7.5"
    • Offset: 37mm
    • Center Bore: PFS - Includes Set of Four PFS to 72.5mm PFS Rings & Clips
    • Bolt Pattern: 5x120
    • Color: Sport Silver
    Show More Show Less

    Valvetronic Designs - Corporate Logo
    T#:53149928
    Part#: VTDTIPSW2535BRT
    Ships in 1 Business Day
    New Item
    $ 79.99 USD
    Free Shipping
    $ 79.99 USD
    Free Shipping
    The perfect cherry on top! Our selection of Valvetronic Designs Exhaust Tips gives your vehicle that perfect look, and with various styles and finishes, the customization is endless. Whether you're looking to upgrade your full system or add a set to your universal kit, these exhaust tips help ensure your vehicle looks as good as it sounds!
    Show More Show Less
    19" APEX EC-7 Staggered Wheel Set - Choose Your Finish
    2X Entries For Our G87 M2 Sweepstakes!
    APEX Wheels - Corporate Logo
    T#:19560873
    Part#: EC7199H10PDK
    Back Ordered
    Starting at $ 1,836.00 USD
    Free Shipping
    Starting at $ 1,836.00 USD
    Free Shipping
    APEX EC-7 19" Staggered Wheel Set -- 19x9" / 19x10" This set of 9" and 10" EC-7 wheels is an easy staggered fitment for the E46 M3 and Z4M models. These are a direct fit with no spacers or fender rolling required. We use a 9" ET30 on the front and a 10" ET25 on the rear. These are only slightly wider than the stock sizes. The rear wheels have a deeper concave face than the fronts, emphasizing the RWD chassis and adding some muscularity to the stance. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still lightweight. The wheels are around 10 lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
    Show More Show Less
    Mishimoto - Corporate Logo
    T#:51075067
    Part#: MMIG-BMW-1108
    Ships in 3 Business Days
    New Item
    $ 274.99 USD
    Free Shipping on orders $49 and up
    The Mishimoto Ignition Coil (MMIC-BMW-11B) focuses on durability and electrical precision.


    Vargas Turbo Technologies - Corporate Logo
    T#:20749254
    Part#: VTT-DHPLS
    Ships in 10 Business Days
    $ 32.99 USD
    Free Shipping
    $ 32.99 USD
    Free Shipping
    These are made from molded plastic for a perfect fit. Each holder has dual Suction cups and will stick to any smooth surface. We suggest mounting them in the upper left or right corner of your windshield with a full view of the sky. Dragy holder features Stop your Dragy from flying off the dash and having to search for it Position your Dragy in the optimal position for the best satellite coverage VTT Dragy holder exposes the entire top of the Dragy so nothing is blocking the receiver from the Satellite The charging port is not blocked and can be accessed with the cover on
    Show More Show Less
    ACT - Corporate Logo
    T#:11497324
    Part#: 6240029
    Ships in 6 Business Days
    Sale - Save 10% $ 222.00

    This product was last offered at the strikethrough price on
    07-22-2026

    $ 199.80 USD
    Sale - Save 10%
    $ 222.00

    This product was last offered at the strikethrough price on
    07-22-2026

    $ 199.80 USD
    Valvetronic Designs - Corporate Logo
    T#:53149924
    Part#: VTDTIPSLVE2535FC
    Ships in 1 Business Day
    New Item
    $ 89.99 USD
    Free Shipping
    $ 89.99 USD
    Free Shipping
    The perfect cherry on top! Our selection of Valvetronic Designs Exhaust Tips gives your vehicle that perfect look, and with various styles and finishes, the customization is endless. Whether you're looking to upgrade your full system or add a set to your universal kit, these exhaust tips help ensure your vehicle looks as good as it sounds!
    Show More Show Less

    19" APEX ARC-8 Staggered Wheel Set - Pick Your Finish
    2X Entries For Our G87 M2 Sweepstakes!
    APEX Wheels - Corporate Logo
    T#:20287704
    Part#: ARC819105ET22
    Ships on Oct 22, 2026
    Starting at $ 1,814.00 USD
    Free Shipping
    Starting at $ 1,814.00 USD
    Free Shipping
    APEX wheels are stronger, lighter wheels than typical cast wheels thanks to their Flow-formed semi-forging process. These wheels are on average 10lbs lighter or more! This reduces unsprung weight, allow for the best performance possible. The spokes and barrel are designed to allow as much room as possible for brake systems, while retaining a classic motorsports theme that matches perfectly with the aggressive BMW style. Thanks to these qualities, these wheels will keep your looks and performing at your best with plenty of confidence! Shed weight and add style with APEX wheels! 19x9.5" ET33/19x10.5" ET22.
    Show More Show Less

    19" APEX SM-10 Staggered Wheel Set - Pick Your Finish
    2X Entries For Our G87 M2 Sweepstakes!
    APEX Wheels - Corporate Logo
    T#:19858318
    Part#: SM10199H10S
    Ships in 5 Business Days
    Starting at $ 1,976.00 USD
    Free Shipping
    Starting at $ 1,976.00 USD
    Free Shipping
    Apex ARC8 19x9" ET30/19x10" ET25 Staggered Wheel Set APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
    Show More Show Less
    Air Lift - Corporate Logo
    T#:377941
    Part#: 23444
    Ships in 4 Business Days
    $ 513.99 USD
    Free Shipping
    $ 513.99 USD
    Free Shipping

    Air Lift Viair 444C Dual Pack Compressor - 200 PSI - Chrome offers a significant upgrade for BMW air suspension systems, delivering superior performance and reliability. Engineered by Turner Motorsport, these compressors are designed to enhance efficiency and durability.

    • Newly-Developed Intercooler Head: Improves compressor efficiency and performance.
    • Stainless Steel Braided Leader Hoses: Includes inline check valve assembly for enhanced protection against high amperage restarts.
    • Chrome Finish: Provides increased durability and a sleek, aesthetic appeal.
    • Complete Kit: Includes air filter assemblies, remote mount brackets, fittings, spare air filter elements, nuts, bolts, washers, lock washers, and airline clips.
    • Easy Installation: Compatible with various air suspension setups for a hassle-free upgrade.

    Upgrade your BMW's air suspension system with the Air Lift Viair 444C Dual Pack Compressor for top-tier performance and durability.

    Show More Show Less

    19" APEX EC-7 Square Wheel Set - Pick Your Finish
    2X Entries For Our G87 M2 Sweepstakes!
    APEX Wheels - Corporate Logo
    T#:19825255
    Part#: EC7199ET30QAN
    Ships in 5 Business Days
    Starting at $ 1,796.00 USD
    Free Shipping
    Starting at $ 1,796.00 USD
    Free Shipping
    Apex ARC8 19x9" ET28 Square Wheel Set APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
    Show More Show Less
    APEX SM-10 18x8.5"/9.5" Staggered Wheel Set
    2X Entries For Our G87 M2 Sweepstakes!
    APEX Wheels - Corporate Logo
    T#:394135
    Part#: SM10APEXSTG1
    Ships in 5 Business Days
    Starting at $ 1,736.00 USD
    Free Shipping
    Starting at $ 1,736.00 USD
    Free Shipping
    Apex ARC8 18x8.5" ET35/18x9.5" ET22 Square Wheel Set APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:637959
    Part#: 34112282619KT3
    Ships in 1 day
    Sale - Save 4% $ 1,670.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 1,607.68 USD
    Sale - Save 4%
    $ 1,670.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 1,607.68 USD

    AC Hydraulic - Corporate Logo
    T#:23615495
    Part#: A12-230
    Ships in 3 Business Days
    $ 226.99 USD
    Free Shipping on orders $49 and up

    For some of the best bottle jacks in production, stick with AC Hydraulic.  Now backed by our LIFETIME REPLACEMENT program, don't worry about your jack failing you by combining two amazing brands in one deal: ECS's lifetime replacement and AC Hydraulic's premium quality.

    Features:

    • 5 models with lifting capacities from 26,500 - 66,000 lb
    • With extension screw for optimal use of the stroke
    • Jack can be used in horizontal position, as long as the pump piston is placed under the jack
    • Fitted with practical carrying handle for easy transport


    Specifications:

    • Capacity: 26,500 lb
    • Min height: 9.06 in
    • Hydraulic lift: 6.30 in
    • Extension screw: 4.33in
    • Max height: 19.69 in
    • Bevelled base: Yes
    Show More Show Less
    18" APEX ML-10RT Forged Wheels - Staggered Set Of Four
    2X Entries For Our G87 M2 Sweepstakes!
    APEX Wheels - Corporate Logo
    T#:31788318
    Part#: ML1018952120RKT1
    Ships in 5 Business Days
    $ 2,996.00 USD
    $ 2,996.00 USD
    Clinched - Corporate Logo
    T#:31158737
    Part#: MS15
    Special Order: No Guaranteed ETA
    $ 330.00 USD
    $ 330.00 USD
    15cm "Muscle" Universal Fender Flares - Pair

    15cm "Muscle" Universal Fender Flares - Pair are crafted from high-quality, impact-resistant ABS plastic, the same durable material used in OE bumpers. Designed for a universal fit, these fender flares offer both strength and lightweight performance, making them a versatile addition to various makes and models with minor customization.

    • High-Quality Material: Made from impact-resistant ABS plastic, ensuring durability and strength comparable to OE bumpers.
    • Universal Fit: Suitable for many makes and models with minor customization; can be blended with the vehicle's body or left with exposed rivets and edges.
    • Customizable Installation: Requires drilling and cutting of original fenders; installation with rivets and bolts.
    • Pliable Design: Easily heated and molded to follow factory body lines, offering flexibility compared to fiberglass flares.

    Enhance your vehicle's look and protection with these high-performance fender flares.

    Show More Show Less


    034Motorsport - Corporate Logo
    T#:587831
    Part#: 034-101-4000
    Ships in 2 Business Days
    $ 153.00 USD
    Free Shipping
    $ 153.00 USD
    Free Shipping
    Bosch Oxygen Sensor - E46 Z3 Z4
    2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
    Bosch - Corporate Logo
    T#:2307
    Part#: 11781406621
    In Stock at Vendor
    $ 166.99

    This product was last offered at the strikethrough price on
    05-07-2026

    $ 161.99 USD
    Free Shipping
    $ 161.99 USD
    Free Shipping

    Bad oxygen sensors can cause check engine lights and poor fuel mileage. Replace your faulty sensor with this high quality Bosch sensor to turn off your check engine light and restore fuel mileage. OEM replacement for BMW part # 11781406621.

    Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    This oxygen sensor fits the following BMWs:
    2001-2006 E46 3 Series M3 M3 Convertible
    2001-2002 Z3 M Z3 M Roadster Z3 M Coupe with S54 engine
    2006-2008 E85 E86 Z4 M Z4 M Roadster Z4 M Coupe

    Show More Show Less