BMW Tools & Specialty Equipment for BMW E46 M3 S54 3.2L (1999-2005)

European Pressure Brake Bleeder & Catch Bottle With Caliper Hook Set,...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:34919051

Part#: 007237SCH01A2KT

Ships on Aug 28, 2026

Sale - Save 44% $ 168.99

This product was last offered at the strikethrough price on
01-29-2026

$ 95.26 USD

Add to Wish List

Qty

Sale - Save 44%

$ 168.99

This product was last offered at the strikethrough price on
01-29-2026

$ 95.26 USD

Add to Wish List

BRAKE BLEEDER:

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

Holds a full 3-Liters (3.17 qts) of brake fluid
Easy to read 0-30 lbs pressure gauge built into the tank top
Pressure relief valve for safe release of pressure
40" hose with detachable swivel fitting

Note:

Do not exceed 20 PSI
LIFETIME REPLACEMENT

Includes:

3 Liter (3.17 qts) storage tank
Pressure cap with 0-30 lb gauge and pressure relief valve
40" hose
Dual preventative fittings on the hose, featuring a chrome quick coupler on one end to snap onto the master cylinder cap and a detachable swivel fitting on the other end

Note:

Recommend working at 10 PSI
Dimensions for cap seal: 12x21x4 mm
LIFETIME REPLACEMENT

CATCH BOTTLE:

Keep your fluid's off the floor and into our catch bottle. The bottle has fluid level markings from 0.2L to 0.7 liter. This feature allows you to measure how much fluid you have sent thru the system. Our bleeder bottle features an expandable/collapsible top portion for easier storage. Gasket in cap prevents leakage. Tubing is extra long at 24" from cap to nipple. Flexible hose can be pushed down into bottle for storage when done. Bottle now features a handy hanger bracket to hang bottle from bottom of car.

CALIPER HOOK SET:

Tired of messing with bent coat hangers or bungee cords to hang your calipers up and out of the way when performing brake maintenance? These hooks make working on your brakes easier by letting you hang your calipers with ease, no more fighting with the bungee cords or zip ties to hold the caliper just right or having to make your own "custom" hooks with wire.

Holds brake calipers out of the way while working on brakes
Also use to hang other automotive parts and tools while working on your vehicle.
Stronger than zip ties or wire.
Save the brake hose by not hanging caliper by hose.
Made of thick steel for strength and durability. length is 8"

BILLET ALUMINUM CAP:

This aluminum cap with 90 degree swivel will work with our T#363245 Euro bleeder or our T#366970 3-Liter Multi-functional Fluid Pump Kit.

Features an all aluminum 45mm cap with quick coupler nipple.

BLEEDER WRENCH:

Finally, a bleeder wrench with just the right angle to open the bleeder screw without having to spend all that time removing each wheel from your car.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

The RennStand Jack Stand - With BMW, Mini, & Mercedes Jack Pad Adapt...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:6811838

Part#: 18M-RS3KT5

In Stock

$ 249.99 USD

Add to Wish List

Qty

$ 249.99 USD

Add to Wish List

Schwaben Oil Filter Removal Pliers / Wrench

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:584156

Part#: P-630

In Stock

Sale - Save 25% $ 33.99

This product was last offered at the strikethrough price on
05-02-2026

$ 25.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 33.99

This product was last offered at the strikethrough price on
05-02-2026

$ 25.49 USD

Add to Wish List

Schwaben Oil Filter Removal Pliers / Wrench are designed to tackle the most stubborn spin-on filters with ease. Featuring large, adjustable jaws with raised teeth, these pliers provide a secure grip on a wide range of filter diameters. The long, plastic-coated handles offer a comfortable grip and added leverage, making filter removal straightforward and efficient.

Efficient Removal: Handles the toughest oil filters with ease, thanks to its robust design.
Versatile Fit: Adjustable jaws with raised teeth ensure a secure grip on various filter sizes.
Comfortable Use: Long, plastic-coated handles provide a comfortable grip and extra leverage.
Durable Construction: Built to last, ensuring reliable performance for frequent use.

Warning: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. For more information, visit Proposition 65.

Show More Show Less

Piston Ring Filer

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:25805754

Part#: 3594SCH01A

In Stock

Sale - Save 40% $ 64.99

This product was last offered at the strikethrough price on
05-03-2026

$ 38.99 USD

Add to Wish List

Qty

Sale - Save 40%

$ 64.99

This product was last offered at the strikethrough price on
05-03-2026

$ 38.99 USD

Add to Wish List

The Schwaben Piston Ring Filer is a vital tool for obtaining the precise end gap necessary for optimal piston ring performance.

This filer allows you to swiftly and accurately file piston rings to exact measurements, enhancing your engine’s efficiency and lifespan. By simply positioning the piston ring and turning the handle, you can easily rotate the abrasive wheel for a smooth and effective filing process.

**Note:** For the Schwaben Universal Piston Ring Compressor, check out T25805755!

Key Features:

Optimize Performance: Achieve the perfect end gap crucial for top engine efficiency.
Quick and Precise: File rings to exact specifications with ease.
Easy Operation: Position the piston ring and turn the handle to effortlessly rotate the abrasive wheel.
Enhanced Engine Longevity: Accurate end gaps contribute to longer engine life and better performance.

Instructions:

1. Position the Ring: Place the piston ring on the outer edge against the stop and align the ends squarely against the grinding wheel. Apply light, even pressure against the wheel to prevent grinding too large a gap.
2. Operate the Tool: Turn the handle so the grinding wheel turns towards the inside edge of the ring (counter-clockwise when viewed from the handle side of the tool).
3. Exercise Caution: This is a diamond grinding wheel. It cuts fast!

Checking Piston Ring Gap:

1. Deburr the Ring Ends: Carefully remove any burrs on the ring ends before placing the ring in the bore. A light touch with a fine abrasive stone works well.
2. Clean the Rings: Thoroughly clean the rings with lacquer thinner or acetone, as the paint coating from the factory may occasionally scratch the cylinder bore. Always wear gloves during this process.
3. Position the Ring in the Cylinder: Place the ring squarely in the cylinder bore, about 1" down from the deck surface. An upside-down flat-top piston will help you properly square the ring.
4. Measure the End Gap: Use a feeler gauge to measure the ring's end gap. Apply light grinding pressure and check frequently to avoid making the end gap too large.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

10.5 Liter Manual Fluid Extractor Pump

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:6166476

Part#: LCB446SCH

In Stock

Sale - Save 15% $ 132.99

This product was last offered at the strikethrough price on
05-03-2026

$ 113.04 USD

Add to Wish List

Qty

Sale - Save 15%

$ 132.99

This product was last offered at the strikethrough price on
05-03-2026

$ 113.04 USD

Add to Wish List

Extract all types of oils and fluids the easy way with more capacity! Do your oil change without getting under the car.

Genuine BMW BBS Center Cap Wrench

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:8216

Part#: 36131179325

In Stock

9% off MSRP $ 30.25

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 27.38 USD

Add to Wish List

Qty

9% off MSRP

$ 30.25

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 27.38 USD

Add to Wish List

Genuine BMW Hub Cap Wrench - Sw80
This item fits the following BMW Chassis:
E30 M3,E30,E34,E53 X5

Tool - Inner tie-rod removal - CTA Tools

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:580737

Part#: CTA4014

In Stock

$ 21.42 USD

Add to Wish List

Qty

$ 21.42 USD

Add to Wish List

Removes inner tie rods without removing outer tie rods

Bav Auto Trailing Arm Bushing Tool

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:580370

Part#: B8800047

In Stock

Sale - Save 10% $ 122.99

This product was last offered at the strikethrough price on
05-03-2026

$ 110.69 USD

Add to Wish List

Qty

Sale - Save 10%

$ 122.99

This product was last offered at the strikethrough price on
05-03-2026

$ 110.69 USD

Add to Wish List

Remove and install rear trailing arm bushings without removing the trailing arms from the vehicle.

THINKOBD 100

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2302720

Part#: 301050512

Ships in 1 Business Day

14% off MSRP $ 34.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 29.99 USD

Add to Wish List

Qty

14% off MSRP

$ 34.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 29.99 USD

Add to Wish List

This THINKOBD 100 obd2 car code reader can fast scan and clear trouble codes, even a beginner can use this unit to read the error code.

Bav Auto Hub Adapter / Hub Puller

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:580427

Part#: B8800120

In Stock

Sale - Save 10% $ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 98.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 98.99 USD

Add to Wish List

For use with B8800122 impact driver to remove stuck CV axle shafts.

Schwaben 8 Liter Oil Drain Pan

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:556675

Part#: 006247SCH01A

In Stock

Sale - Save 25% $ 33.99

This product was last offered at the strikethrough price on
05-02-2026

$ 25.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 33.99

This product was last offered at the strikethrough price on
05-02-2026

$ 25.49 USD

Add to Wish List

This high-density polyethylene drain pan is resistant to chemicals and solvents and is easy to clean. The anti-splash lip and baffles help prevent spilling when carrying and the 1 in dia spout makes pouring easy. Comes with large, easy-grip handles. Great for catching coolant or other fluids.

Show More Show Less

Schwaben Heat Gun Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:583763

Part#: 026920SCH01A

In Stock

Sale - Save 40% $ 42.99

This product was last offered at the strikethrough price on
05-03-2026

$ 25.79 USD

Add to Wish List

Qty

Sale - Save 40%

$ 42.99

This product was last offered at the strikethrough price on
05-03-2026

$ 25.79 USD

Add to Wish List

The Schwaben Dual Temperature Heat Gun Kit is the ideal tool for stripping paint, removing decals, shrinking wire wrap, etc. The heat gun has a switch which allows for two different heat settings (572F and 932F).

Features:

Four airflow adapters, 1pc Large Deflector Nozzle, 1pc Reduction Nozzle, 1pc Small Deflector Nozzle, and 1pc Reflector Nozzle.
Voltage 120C, 60 HZ
Amps 12.5A
Two heat settings: Low Heat up to 572 Degree F. High Heat 932 Degree F.
Air Volume: Low Heat: 10 cfm (280L/min) High Heat: 17 cfm (480 L/min)
Wattage: Low Heat: 1000W High Heat: 1500W
Has 6.75 Ft cord.
Built in hook to hang on wall.
For California Prop 65 warning see: www.P65Warnings.ca.gov. and photo below.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Tools & Specialty Equipment for BMW E46 M3 S54 (1999-2005)

Sub-Categories

European Pressure Brake Bleeder & Catch Bottle With Caliper Hook Set,...

The RennStand Jack Stand - With BMW, Mini, & Mercedes Jack Pad Adapt...

Schwaben Oil Filter Removal Pliers / Wrench

Piston Ring Filer

10.5 Liter Manual Fluid Extractor Pump

Genuine BMW BBS Center Cap Wrench

Tool - Inner tie-rod removal - CTA Tools

Bav Auto Trailing Arm Bushing Tool

THINKOBD 100

Bav Auto Hub Adapter / Hub Puller

Schwaben 8 Liter Oil Drain Pan

Schwaben Heat Gun Kit

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results