BMW E46 M3 Seats & Seat Accessories

OMP racing seat with a perforated Fiberglass shell and high protection shoulder and shaped headrest, designed for comfortable driving. Higher side bolsters for lateral leg support. Constructed with fire-resistant Airtex material and velour upholstering.

XL version for taller drivers.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards

Genuine BMW Seat Belt Guide
This item fits the following BMW Chassis:
E46 M3,E46

This OMP racing seat mounting bracket is made to specifically to secure a racing seat in your E46 Sedan. Using stock mounting points, it eliminates the need to weld or modify your floor in any way. Using stock mounting positions is also safer in that they are proven to hold up by the manufacturer in crash tests when the car is designed. Poorly mounted brackets could cause thin metal to tear, split, or buckle if not properly reinforced, leading directly to injury in critical situations.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Fits:
1999-2005 BMW E46 Sedan

The R-925X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9250 Features

• Fits seats between 427mm to 440mm wide at the side mount mounting point
• 7lbs
• 304 Stainless steel
• Black wrinkle powder coat finish 
• Includes provisions for fir extinguisher mount(R-2295)

Multi hole steel seat bracket in compliance with FIA Appendix J art. 253. New design, minimum 16 different positions. Length: 400 mm Thickness: 3 mm

This is an OMP performance RS-PT2 Fiberglass racing seat. The seat internal frame is fiberglass and the entire seat upholstery is velour material. Fiberglass gives strength and light weight and the velour adds to the comfort of the seat. The main backrest pads and leg pad are both exchangeable with different sized pads for a more custom fit. The large shoulder harness slots allow for a variety of driver heights.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

The R-925X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9256 Features

• Fits seats between 443mm to 460mm wide at the side mount mounting point
• 7lbs
• 304 Stainless steel
• Black wrinkle powder coat finish 
• Includes provisions for fir extinguisher mount(R-2295)

This harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking. This bar is easy to install and remove, use only existing holes and mounting points, and will not damage the car in any way.

*For Coupe models only*

Famous Recaro brand quality in an entry level seat! The Recaro Pole Position is a fixed-back fiberglass shell with slots for racing harnesses. It's fully FIA approved which makes it suitable for nearly all ranges of racing series or for a track-only car. The sizing and shape of this seat is best-suited for small-medium sized drivers. This is a side-mount design and requires side mount brackets and vehicle-specific floor adapter. Sliders and additional seat cushions optional.

Seat Specs:

This is an OMP performance WRC-R Fiberglass racing seat. The seat shell is molded fiberglass and the seat upholstery is velour and Airtex material. Fiberglass gives strength and light weight and the Airtex increases breathability of the seat. The main backrest pads and leg pad are both exchangeable with different sized pads for a more custom fit. The large shoulder harness slots allow for a variety of driver heights. 

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards

This OMP racing seat mounting bracket is made to specifically to secure a racing seat in your E46 coupe. Using stock mounting points, it eliminates the need to weld or modify your floor in any way. Using stock mounting positions is also safer in that they are proven to hold up by the manufacturer in crash tests when the car is designed. Poorly mounted brackets could cause thin metal to tear, split, or buckle if not properly reinforced, leading directly to injury in critical situations.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Fits:
1999-2005 BMW E46 Coupe

Universal aluminium brackets for seats with side attachments for Renault R5 >72<84

The R-922X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9221 Features

• Fits seats between 430mm to 460mm wide at the side mount mounting point
• Uses factory sliders, power or manual 
• 7lbs
• 304 Stainless steel
• Black wrinkle powder coat finish 
• Includes provisions for fir extinguisher mount(R-2295)

*Note for use with power sliders BMW switch 61311381205 is needed*

The R-925X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9255 Features

• Fits seats between 395mm to 409mm wide at the side mount mounting point
• 7lbs
• 304 Stainless steel
• Black wrinkle powder coat finish 
• Includes provisions for fir extinguisher mount(R-2295)

This is an OMP performance WRC-R Fiberglass racing seat. The seat shell is molded fiberglass and the seat upholstery is velour and Airtex material. Fiberglass gives strength and light weight and the Airtex increases breathability of the seat. The main backrest pads and leg pad are both exchangeable with different sized pads for a more custom fit. The large shoulder harness slots allow for a variety of driver heights.

XL version for taller drivers.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Racing and aftermarket seats require a mount to afix the seat to the chassis of the car. Most Recaro seats are 'side-mount' which means the brackets attach to the side of the seat and then turn 90 degrees to mount to the floor (or sliders). These are genuine Recaro side mounts that are FIA-certified for optimum safety and security. Many racing organizations require an FIA-approved mount. Sold as a pair with hardware included. Choose from standard steel or light weigt aluminum.

If you want fore-aft adjustment on your Recaro seat you will need a set of sliders. These are the genuine Recaro sliders that are some of the finest quality that we have seen. The sliders fit between the vehicle adapter and the seat brackets. There are two types depending on how your floor adapters work - without tabs and with tabs.

Recaro Seat Slider types -
Without Tabs - offers the lowest possible seating position - the total height of the sliders is 22mm (7/8"); the sliders are sandwiched between the floor mount and seat; the bolts install to the floor mount perpendicular to the ground; works with flat Macht Schnell or VAC style floor mounts only.
With Tabs - the sliders have tabs on each end with three height positions; the positions allow height and rake adjustments but means it's taller than the version without tabs - total height with the tabs is 58mm (2.25"); the tabs mean the mounting bolts install parallel to the ground; some floor mounts require the tab style (Wedge Engineering for example).

The Recaro sliders are all steel - pulling the handle moves teeth on two tracks which is more secure and stable than a single track. This set of sliders has the bar on the inside of the track (the most common for BMW fitments).

Sold per seat.

The R-922X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9220 Features

• Fits seats between 430mm to 460mm wide at the side mount mounting point
• Uses factory sliders, power or manual 
• 7lbs
• 304 Stainless steel
• Black wrinkle powder coat finish 
• Includes provisions for fir extinguisher mount(R-2295)

*Note for use with power sliders BMW switch 61311381205 is needed*

If additional lower back support is needed for those extra long days in the racing seat, OMP offers the Racing Seat Lumbar Cushion. Measuring in at 10" by 8" by 3", it is fastened to the velour fabric of the seat with Velcro strips, it can be adjusted to exactly where you need it. The pad itself is covered with the same velour flame-retardant material as the seat and is embroidered with an OMP logo.

This is an OMP performance TRS-E tubular racing seat. The seat internal frame is tubular steel and the entire seat upholstery is velour material. Tubular steel ensures strength and protection and the velour adds to the comfort of the seat. The leg pad is removable for a more individual fit. The large shoulder harness slots allow for a variety of driver heights.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

The R-925X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9255 Features

• Fits seats between 410mm to 426mm wide at the side mount mounting point
• 7lbs
• 304 Stainless steel
• Black wrinkle powder coat finish 
• Includes provisions for fir extinguisher mount(R-2295)

The limited edition TAKATA Drift Pro LE Seat is a masterpiece of automotive seat engineering, creating an amazing light-weight, hybrid composite recliner. With a stunning pure carbon backrest, fine black leather with a subtle TAKATA Green diamond stitch pattern, high-density molded polyurethane foam, polished stainless steel chassis work, and the world’s best reclining mechanism - this seat re-defines the category of light weight sport seats.

This seat features a pass-thru for a 6-point sub-strap with integrated mounting bars built right into the seat frame. This is truly the best scenario for belt geometry, since the mounting location for the anti-sub strap will remain consistent no matter where in the travel of the seat adjusters you are. Triangulated steel structure ensures structural integrity.

FEATURES:

• Unique hybrid composite steel construction
• Polished stainless steel chassis
• Lightweight pure carbon fiber backrest
• Integrated head restraint
• Dual sided infinite recline facility
• Tip forward backrest
• Tested to ECE R17/FMVSS 207 and ADR 3
• Upholstered in full soft grain Nappa leather
• Integrated Seat Heater

SPECIFICATIONS:

• Tubular steel base frame with integrated sub strap mounting
• Carbon composite lightweight backrest
• Tested to ECE R17/FMVSS 207 and ADR 3
• Base mount system

This is an OMP performance TRS-E tubular racing seat. The seat internal frame is tubular steel and the entire seat upholstery is velour material. Tubular steel ensures strength and protection and the velour adds to the comfort of the seat. The leg pad is removable for a more individual fit. The large shoulder harness slots allow for a variety of driver heights.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Steel brackets for side mounted seats. High model. 400 mm lenght x 3 mm thick

Multi hole aluminium seat bracket in compliance with FIA Appendix J art. 253. New design, minimum 36 different positions. Length: 495 mm Thickness: 6 mm

Made for the OMP Air cooing Kit for the HRC racing seats, this seat padding is perforated to allow air to pass through from the cooling kit, keeping you cool and sweat free.

The limited edition TAKATA Race LE Seat is an incredibly safe, deep sided and extremely rigid seat that still allows freedom of movement for all disciplines. The black Spacer Fabric, stitched in subtle TAKATA Green, keeps you cool. High backed, fully HANS® compatible with increased kidney protection, but relieved below the shoulders for lateral arm movement, this seat allows you to really get over the wheel and take control without any compromise on what is known as one of the most comfortable seats in the industry.

Comes in two sizes, Standard and Wide to ensure a perfect fit for every driver.

FEATURES

• HANS® compatible
• 4/5/6 point harness facility
• Breathable & cooling spacer fabric
• Suede-Tec wear patches
• Deep sided lateral protection
• Dual width options – standard or GT (+30mm)
• Side mounted only – supplied with high tensile bolts and side mounts

SPECIFICATIONS

• FIA Homologated to 8855-1999

This OMP racing seat mounting bracket is made to specifically to secure a racing seat in your E46 Sedan. Using stock mounting points, it eliminates the need to weld or modify your floor in any way. Using stock mounting positions is also safer in that they are proven to hold up by the manufacturer in crash tests when the car is designed. Poorly mounted brackets could cause thin metal to tear, split, or buckle if not properly reinforced, leading directly to injury in critical situations.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Fits:
1999-2005 BMW E46 Sedan

OMP racing seat with a perforated Carbon fiber molded shell and high protection shoulder and shaped headrest, designed for comfortable driving. Higher side bolsters for lateral leg support. Constructed with fire-resistant Airtex material and velour upholstering. Shell is predrilled to allow cooling kit installation.

XL version for taller drivers.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards

The R-924X line of seat mounts is the clean, simple, light weight, and strong way to attach your reclining back or bottom mount seats to your factory seat sliders. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-924X Features

• Fits many bottom mount seats from Recaro, Sparco and more
• Uses factory sliders, power or manual 
• light weight 
• 304 Stainless steel
• Black wrinkle powder coat finish 

OMP HRC-D Premium Quality Carbon Fiber seat with head and shoulder containment with a design to allow installation and comfort in GT cars with little room. Air cooling kit installed with perforated back cushion.

*Made to order, extended wait and shipping times may occur.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Racing and aftermarket seats require a mount to attach the seat to sliders or an adapter plate for the car. Most Recaro race seats are 'side-mount' which means the brackets attach to the side of the seat and then turn 90 degrees to mount to the floor (or sliders). These are made by Macht Schnell and made from steel for great strength and low cost. Sold as a pair to fit one seat. Fits the Recaro Pole Position, Profi, Profi XL, and Pro Racer seats.

These little guys are one of our favorite final touches on a race car build. After years of requests, we now are able to supply these for more than just our race team's use. These aluminum collars bolt on your roll cage's harness bar (or any bar for that matter) and help keep your seat belt harnesses from sliding on the bar. You can use just one pair to accomplish this, or 2 pairs (4 collars total) for the best looking and functioning install. The beauty of these collars (besides being lightweight and looking clean) is that they can be adjusted from side to side, which is convenient if you change you seat or belt configuration. They can also be used for other applications as well, such as taming that helmet net strap. If you're looking for a clean, professional looking solution, these are a superb final touch. As used on our own Championship winning TMS E46 and E90 race cars.

We offer these guide collars in two sizes: for 1.5" OD roll bar tubing or for 1.75" OD roll bar tubing (choose your size below). Check your cage tubing diameter especially if your car was built in Europe as they used metric tubing sizes. If you need a metric size, contact us. Also measure with paint applied, not bare tubing. These are sold by the pair, so be sure to modifying your quantity below (or in the cart) if you need them for both seats.

Many racing series and event organizers are requiring 5 or 6-point harnesses in their events now. Attaching the anchor points to the seat base is a desired alternative to drilling holes in your floor and carpet*. This set includes the 6-point anchor to attach to the Macht Schnell floor mount as well as side attachments for either a bolt-in or snap-in harness.

* - note that most racing harness manufacturers will advise that drilling through the floor is the best method for mounting harnesses. This allows you to locate the mount in the ideal location and angle to fit your driving position. The proper installation is paramount to ensure the harness works correctly in an impact.

Sold per seat.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
1992-1998 E36 BMW 318i 318is 318ti 323is 325i 325is 328i 328is M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 (not convertibles)
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

Designed for the WRC racing seats from OMP, these cushions will add tons of comfort and fit perfectly, attaching with simple Velcro strips.  These 2 individual  cushions are both covered in the AIRTEX® material for additional breathability.

If additional leg support is needed for those extra long days in the racing seat, OMP offers the Racing Seat Leg Cushion. Measuring in at 13" by 8.5" by 3.5", it is fastened to the velour fabric of the seat with Velcro strips. The pad itself is covered with the same velour flame-retardant material as the seat and is embroidered with an OMP logo.

OMP racing seat with a fiberglass shell and high protection shoulder and head containment, designed for comfortable driving. Constructed with fire-resistant airnet and velour upholstering. Fiberglass shell is predrilled to allow cooling kit installation.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Adding seats and keeping your stock 3-point belt? You're going to need this set of brackets to attach the old belt receptacle to the new floor mount. Nearly all BMW seats have the inboard belt buckle attached to the seat. So you will need to remove that buckle and transfer it to your new floor bracket. If you're using the Macht Schnell floor brackets these plates mount in between the sliders and seat. They are made from thick steel then powedercoated in stealthy black. These are sold as a pair to fit one seat and the Macht Schnell floor mounts (may require modification for use on other brand floor mounts). Fits most coupe or sedan models from 1992-2012, including E36, E46, E82, E9X, and Z4 models.

Sold per seat.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
1992-1998 E36 BMW 318i 318is 318ti 323is 325i 325is 328i 328is M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 (not convertibles)
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

This is an OMP performance "WRC-R Carbon" carbon fiber racing seat. The seat shell is autoclave molded carbon fiber and the seat upholstery is velour and Airtex material. Carbon fiber gives strength and light weight and the Airtex increases breathability of the seat. The main backrest pads and leg pad are both exchangeable with different sized pads for a more custom fit. The large shoulder harness slots allow for a variety of driver heights.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards

The best all-around Recaro race seat. The Profi line of seats are fixed-back fiberglass with slots for racing harnesses. It's fully FIA approved which makes it suitable for nearly all ranges of racing series or for a track-only car. The sizing and shape of this seat makes it suitable for smaller drivers. This is a side-mount design and requires side mount brackets and vehicle-specific floor adapter. Sliders and additional seat cushions optional.

Seat Specs:

Multi hole steel seat bracket in compliance with FIA Appendix J art. 253. New design, minimum 36 different positions. Length: 495 mm Thickness: 3 mm

This cushion designed specifically for the WRC and HRC racing seats is a simple addition that adds safety, comfort, and support. It attaches with just two straps to the top of the racing seat and is covered in the same velour fabric as the racing seat itself. A white OMP logo is embroidered in the top half of the cushion to match the design of the seat.

Steel brackets for side mounted seats. Low model. 350 mm length x 3 mm thick.

Often when installing race seats there is a gap between your seat shell to your side brackets. Or maybe you want to shim your seat to one side for a better driving position. These aluminum spacer shims are the perfect solution. They come in a satin black anodize for a stealthy look and include longer hardware in a handy low-profile rounded head.

Included in this set:
2 x 14mm shims with correct extended bolts
4 x 9mm shims with correct extended bolts
2 x 5mm shims with correct extended bolts
4 x washers

These are the ideal finishing touch to your seat install and the preferred method instead of using unsightly washers.

Turner Tip: Positioning the seat close to the transmission tunnel can make it extremely difficult to attach an Allen socket/ratchet. And the Allen socket has to be firmly seated or it will strip the head. We will often use hex bolts on the inside seat locations because it is so much easier. Just make sure you get a hex that is the same grade as the original seat hardware.

The R-925X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9254 Features

• Fits seats between 395mm to 409mm wide at the side mount mounting point
• 7lbs
• 304 Stainless steel
• Black wrinkle powder coat finish 
• Includes provisions for fir extinguisher mount(R-2295)

The R-924X line of seat mounts is the clean, simple, light weight, and strong way to attach your reclining back or bottom mount seats to your factory seat sliders. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-924X Features

• Fits many bottom mount seats from Recaro, Sparco and more
• Uses factory sliders, power or manual 
• light weight 
• 304 Stainless steel
• Black wrinkle powder coat finish 

  The R-924X line of seat mounts is the clean, simple, light weight, and strong way to attach your reclining back or bottom mount seats to your factory seat sliders. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

  R-924X Features

• Fits many bottom mount seats from Recaro, Sparco and more
• Uses factory sliders, power or manual 
• light weight 
• 304 Stainless steel
• Black wrinkle powder coat finish 

In order to mount aftermarket seats in your car, you need a floor mount adapter. These high-quality aluminum adapters are made by Macht Schnell. These bolt to your existing seat mounting studs in the floor and offer the lowest profile of any floor mount (22mm height). This helps to keep your seat at the lowest position possible. Your seat adapters or sliders bolt to this adapter plate. These floor mounts are a matrix style with rows of threaded holes that allow you to find an ideal seat location. There are other options - including homemade - but these seat brackets for your BMW are the highest quality to match your expensive seats.

Sold per seat. Can be used on left or right sides of vehicle.

These adapters were originally designed for the E46 chassis. They can fit the E36 by modifying the mounting holes to match the bolt and stud locations on the E36 floor.

This item fits the following BMWs:
1995-1999 E36 BMW 318i 318is 318ti 318i 323is 323i 325i 325is 325i 328i 328is 328i M3 (except convertibles) ( see note above )
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 (except convertibles)
2003-2008 E85 E86 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

The R-925X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9251 Features

• Fits seats between 427mm to 440mm wide at the side mount mounting point
• 7lbs
• 304 Stainless steel
• Black wrinkle powder coat finish 
• Includes provisions for fir extinguisher mount(R-2295)

Racing harnesses can become uncomfortable due to the height or angle that they sit. With this HSC Harness Height Adjuster, you will be able to adjust your harness between 3 different setting for optimal fitment and comfort. This is a great option for drivers of shorter or taller heights.

Works with racing seats that are HSC Patent Compatible.

OMP HRC-D Premium Quality Carbon Fiber seat with head and shoulder containment with a design to allow installation and comfort in GT cars with little room.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

The R-925X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9257 Features

• Fits seats between 443mm to 460mm wide at the side mount mounting point
• 7lbs
• 304 Stainless steel
• Black wrinkle powder coat finish 
• Includes provisions for fir extinguisher mount(R-2295)

Sporty 3-spoke OMP Cromo steering wheel in 350mm diameter. Chrome aluminum center with OMP horn button and black leather rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have contours for resting your thumbs to give you more leverage and grip. The grip itself is textured at the 9 and 3 positions for extra control of the steering wheel. The 350mm size is on the small size compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

This OMP racing seat mounting bracket is made to specifically to secure a racing seat in your E46 coupe. Using stock mounting points, it eliminates the need to weld or modify your floor in any way. Using stock mounting positions is also safer in that they are proven to hold up by the manufacturer in crash tests when the car is designed. Poorly mounted brackets could cause thin metal to tear, split, or buckle if not properly reinforced, leading directly to injury in critical situations.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Fits:
1999-2005 BMW E46 Coupe

The R-925X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9252 Features

• Fits seats between 410mm to 426mm wide at the side mount mounting point
• 7lbs
• 304 Stainless steel
• Black wrinkle powder coat finish 
• Includes provisions for fir extinguisher mount(R-2295)

Save over $400 - Warehouse Clearance - Open Box - Customer Cancelled Order

Recaro's safest racing seat! The Pro Racer HANS is designed to be fully compatible with the HANS safety system. The Pro Racer features more sculpting to the shell to allow more clearance between the seat and the HANS device around your neck and chest. Some other seats can push on the HANS and make it uncomfortable when it should be nearly transparent. This is also one of the most enclosing and protective seats on the market. Not only does it feature the integrated head protection, the side bolsters are taller than most seats and the shoulders feature an anti-slip surface to keep your body in place. But apart from being safe, this seat is comfortable too!

This seat is available in the standard sizing as well as an optional XL size. See dimensions chart to the right.

Pro Racer HANS Seat Specs:

Keeping your helmet steady during a race is important for comfort, safety, and coordination. OMP helmet protection cushions are an easy addition to help keep your head and helmet from rocking too far to either side. These cushions attach to the velour fabric covering the existing helmet supports with Velcro straps. The cushions are covered in the same velour fabric with the same flame-retardant qualities. In the center of each cushion is an embroidered OMP logo.

The limited edition TAKATA Race LE Seat is an incredibly safe, deep sided and extremely rigid seat that still allows freedom of movement for all disciplines. The black Spacer Fabric, stitched in subtle TAKATA Green, keeps you cool. High backed, fully HANS® compatible with increased kidney protection, but relieved below the shoulders for lateral arm movement, this seat allows you to really get over the wheel and take control without any compromise on what is known as one of the most comfortable seats in the industry.

Comes in two sizes, Standard and Wide to ensure a perfect fit for every driver.

FEATURES

• HANS® compatible
• 4/5/6 point harness facility
• Breathable & cooling spacer fabric
• Suede-Tec wear patches
• Deep sided lateral protection
• Dual width options – standard or GT (+30mm)
• Side mounted only – supplied with high tensile bolts and side mounts

SPECIFICATIONS

• FIA Homologated to 8855-1999

The best all-around Recaro race seat. The Profi SPA seat is fixed-back Kevlar with slots for racing harnesses. It's fully FIA approved which makes it suitable for nearly all ranges of racing series or for a track-only car. The sizing and shape of this seat makes it suitable for smaller drivers. This is a side-mount design and requires side mount brackets and vehicle-specific floor adapter. Sliders and additional seat cushions optional.

Seat Specs:

This is an OMP performance "ARS-R Carbon" carbon fiber racing seat. The seat shell is autoclave molded carbon fiber and the seat upholstery is velour and Airtex material. Carbon fiber gives strength and light weight and the Airtex increases breathability of the seat. The main backrest pads and leg pad are both exchangeable with different sized pads for a more custom fit. The large shoulder harness slots allow for a variety of driver heights.

*Made to order, extended wait and shipping times may occur.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards

Recaro's safest racing seat! The Pro Racer HANS is designed to be fully compatible with the HANS safety system. The Pro Racer features more sculpting to the shell to allow more clearance between the seat and the HANS device around your neck and chest. Some other seats can push on the HANS and make it uncomfortable when it should be nearly transparent. This is also one of the most enclosing and protective seats on the market. Not only does it feature the integrated head protection, the side bolsters are taller than most seats and the shoulders feature an anti-slip surface to keep your body in place. But apart from being safe, this seat is comfortable too!

This seat is available in the standard sizing as well as an optional XL size. See dimensions chart to the right.

Pro Racer HANS Seat Specs:

Detects whether a person is present in a seat  to determine if the airbag needs activated or not.

Genuine BMW Control Electronics, Seat Occupancy
This item fits the following BMW Chassis:
E36 M3,E39 M5,E46 M3,E34,E36,E38,E39,E46,E53 X5,E65

 

The Recaro Flexible Adaptor seat mounts are the most robust and stout slider mounts we have seen. The Flexible Adapter mounts are a reinforced side mount + slider assembly intended for pro endurance racing. These are the first FIA-certified seat sliders. They have extra reinforcing braces on the front and rear which takes away a lot of the lateral motion from traditional un-reinforced side mount brackets. As racecars see more lateral loading from high downforce and stickier tires the seat naturally wants to flex even more. This extra strength seat slider/mount combination is just the thing to keep you planted in place. Even the slider hand bar is overbuilt and bright red for to grab your attention. These have been designed by Recaro specifically for endurance races where driver changes need to be done in seconds.

This slider + mount system only works with the Recaro Pro Racer SPA/SPG seats. Choose from the standard size or XL version.

The Recaro Sport seat is the closest to an OEM-type of tuning seat you will find on the market. The Sport features comfort and luxorious materials combined with the same form fitting and embracing seat design as the Recaro motorsport seats. This is the seat that focuses most on comfort with an innovative spine support system, generous seat padding, and a wide range of fabric options. The lumbar pad on the front of the seat is fore-aft adjustable which is a great convenience for taller drivers. And the hip and side bolsters are tall to snugly hold you in place. It's a tuning seat, compatible with the standard 3-point belt, as well as pass-throughs for a 4-point harness.

Seat Specs: Fitment notes:

This is a bottom-mount seat and seat adapters are not included. A vehicle-specific floor adapter plate is required. The seat will attach to either a set of sliders or be fixed in place directly to the floor plate (non adjustable).

This seat is designed mainly for street use. However, depending on the car model, various modifications and fabrication may be required to retain any of the original seat features. This is more of an issue on newer cars with integraged occupancy sensors, power and heat, seat memory settings, air bags, etc. Professional installation, or detailed knowledge, on newer cars is strongly recommended. We also recommend custom installation to gain the ideal seating position for your tastes.

This is an OMP performance TRS-E tubular racing seat. The seat internal frame is tubular steel and the entire seat upholstery is vinyl material. Tubular steel ensures strength and protection and the vinyl adds to the comfort and style of the seat. The leg pad is removable for a more individual fit. The large shoulder harness slots allow for a variety of driver heights.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Racing seats can become uncomfortable as the thin padding of the seat begins to compress. If you're planning on sitting in the seat for any extended periods of time, a base cushion is the perfect addition. This OMP seat cushion is 1.5" of firm, but comfortable and supportive, foam that attaches to the velour seat fabric using Velcro strips. The seat cushion is covered in black velour fabric that is flame-retardant and has an OMP logo embroidered in the center. The cushion is 13" long and 11" wide.

Air Blower with rubber adapter for Air Cooling Kit (HC/913). This forces the air into the kit to keep the driver cool during long races in hot conditions.

The blower (HC/914/V) and the adapter (HC/914/R) are also available as spare parts.

This is an OMP performance CHAMP-R Fiberglass racing seat. The seat shell is fiberglass and the seat upholstery is velour material. Fiberglass gives strength and light weight and the velour adds to the comfort of the seat. The main backrest pads and leg pad are both exchangeable with different sized pads for a more custom fit. The large shoulder harness slots allow for a variety of driver heights.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

OMP racing seat with a perforated Fiberglass shell and high protection shoulder and shaped headrest, designed for comfortable driving while still being able to be used in an area with restricted room in the upper cabin area. Medium-high side bolsters for lateral leg support. Constructed with fire-resistant Airtex material and velour upholstering.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards

The limited edition TAKATA Drift Pro LE Seat is a masterpiece of automotive seat engineering, creating an amazing light-weight, hybrid composite recliner. With a stunning pure carbon backrest, fine black leather with a subtle TAKATA Red diamond stitch pattern, high-density molded polyurethane foam, polished stainless steel chassis work, and the world’s best reclining mechanism - this seat re-defines the category of light weight sport seats.

This seat features a pass-thru for a 6-point sub-strap with integrated mounting bars built right into the seat frame. This is truly the best scenario for belt geometry, since the mounting location for the anti-sub strap will remain consistent no matter where in the travel of the seat adjusters you are. Triangulated steel structure ensures structural integrity.

FEATURES:

• Unique hybrid composite steel construction
• Polished stainless steel chassis
• Lightweight pure carbon fiber backrest
• Integrated head restraint
• Dual sided infinite recline facility
• Tip forward backrest
• Tested to ECE R17/FMVSS 207 and ADR 3
• Upholstered in full soft grain Nappa leather
• Integrated Seat Heater

SPECIFICATIONS:

• Tubular steel base frame with integrated sub strap mounting
• Carbon composite lightweight backrest
• Tested to ECE R17/FMVSS 207 and ADR 3
• Base mount system

OMP racing seat with a fiberglass shell and high protection shoulder and head containment, designed for comfortable driving. Constructed with fire-resistant airnet and velour upholstering. Fiberglass shell is predrilled to allow cooling kit installation.

This is the XL version - higher and larger than standard seat for drivers taller than 5' 10".

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Recaro's safest racing seat! The Pro Racer HANS is designed to be fully compatible with the HANS safety system. The Pro Racer features more sculpting to the shell to allow more clearance between the seat and the HANS device around your neck and chest. Some other seats can push on the HANS and make it uncomfortable when it should be nearly transparent. This is also one of the most enclosing and protective seats on the market. Not only does it feature the integrated head protection, the side bolsters are taller than most seats and the shoulders feature an anti-slip surface to keep your body in place. But apart from being safe, this seat is comfortable too!

This seat is available in the standard sizing as well as an optional XL size. See dimensions chart to the right.

Pro Racer HANS Seat Specs:

OMP racing seat with a perforated Fiberglass shell and high protection shoulder and shaped headrest, designed for comfortable driving. Higher side bolsters for lateral leg support. Constructed with fire-resistant Airtex material and velour upholstering.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards

Made specifically for the OMP HTE racing seat, this support cushion is covered with the same AIRTEX® material for both style and high breathability, perfect for extra long track days! This pad attaches to the seat using simple Velcro strips.

The Cross Sportster CS seat is everything you wanted in a high quality street tuner seat. This seat doesn't just look cool - it's also a functional ergonomic improvement. The Cross Sportster is similar to the legendary Sportster CS but with smaller hip bolsters to make ingress/egress easier. All of the other features of the Sportster CS carry over - aggressive side bolsters, wide shoulder supports and integrated headrest to properly support and protect your body during spirited driving. This seat also features a heated element in the base (with its own switch) on vinyl and leather materials. Recaro has also focused on comfort by contouring the backrest to the natural shape of the human spine. The padding is thick and dense and the seat cushion has a built-in shock absorbing design. This seat will accept a standard 3-point seatbelt as well as a 4-point harness. The backrest folds forward for easy access to rear seats in a coupe body.

Feedback from a Sportster CS user: "The phenomenological aspect that struck me the most, however, is just how much more a part of the car you feel when you are harnessed into these seats! I got a thrill from driving that I haven't had since I was in high school! It was that dramatic a change. The stock seats now seem like puffy cushions that float in disconnected fashion from the car and its movements. With the Recaros, you are one with the Beast. If I had known how dramatic a difference they would make, they would have been the first mod I made, without a doubt."

Seat Specs: Fitment notes:

This is a bottom-mount seat with a Recaro seat adapter included. A vehicle-specific floor adapter plate is still required. This seat will attach to either a set of sliders or be fixed in place directly to the floor plate (non adjustable).

This seat is designed mainly for street use. However, depending on the car model, various modifications and fabrication may be required to retain any of the original seat features. This is more of an issue on newer cars with integraged occupancy sensors, power and heat, seat memory settings, air bags, etc. Professional installation, or detailed knowledge, on newer cars is strongly recommended. We also recommend custom installation to gain the ideal seating position for your tastes.

The Sportster CS seat is everything you wanted in a street sport seat. This seat doesn't just look cool - it's also a functional ergonomic improvement. This seat goes above and beyond any standard BMW seat to grip your body and keep you planted in the seat. Your whole body is supported - aggressive side and hip bolsters combine with wide shoulder supports and integrated headrest to properly support and protect your body during extreme driving. But Recaro has also focused on comfort by contouring the backrest to the natural shape of the human spine. The padding is thick and dense and the seat cushion has a built-in shock absorbing design. It also has a heated bottom cushion for additional added comfort (only on vinyl and leather materials). This seat will accept a standard 3-point seatbelt as well as a 4-point harness. The backrest folds forward for easy access to rear seats in a coupe body. The Sportster CS is the obvious choice, even for manufacturers like BMW, for a premium and functional ultra-sport seat.

Feedback from a Sportster CS user: "The phenomenological aspect that struck me the most, however, is just how much more a part of the car you feel when you are harnessed into these seats! I got a thrill from driving that I haven't had since I was in high school! It was that dramatic a change. The stock seats now seem like puffy cushions that float in disconnected fashion from the car and its movements. With the Recaros, you are one with the Beast. If I had known how dramatic a difference they would make, they would have been the first mod I made, without a doubt."

Seat Specs: Fitment notes:

This is a bottom-mount seat with a Recaro seat adapter included. A vehicle-specific floor adapter plate is still required. This seat will attach to either a set of sliders or be fixed in place directly to the floor plate (non adjustable).

This seat is designed mainly for street use. However, depending on the car model, various modifications and fabrication may be required to retain any of the original seat features. This is more of an issue on newer cars with integraged occupancy sensors, power and heat, seat memory settings, air bags, etc. Professional installation, or detailed knowledge, on newer cars is strongly recommended. We also recommend custom installation to gain the ideal seating position for your tastes.

The Recaro Sport Topline seat is the closest to an OEM-type of tuning seat you will find on the market. The Sport features comfort and luxorious materials combined with the same form fitting and embracing seat design as the Recaro motorsport seats. This is the seat that focuses most on comfort with an innovative spine support system, generous seat padding, and a wide range of fabric options. The lumbar pad on the front of the seat is fore-aft adjustable which is a great convenience for taller drivers. And the hip and side bolsters are tall to snugly hold you in place. It's a tuning seat, compatible with the standard 3-point belt, as well as pass-throughs for a 4-point harness.

The Sport Topline seat also features power adjustments for the height and tilt as well as climate control (seat venting and heating).

Seat Specs: Fitment notes:

This is a bottom-mount seat and seat adapters are not included. A vehicle-specific floor adapter plate is required. The seat will attach to either a set of sliders or be fixed in place directly to the floor plate (non adjustable).

This seat is designed mainly for street use. However, depending on the car model, various modifications and fabrication may be required to retain any of the original seat features. This is more of an issue on newer cars with integraged occupancy sensors, power and heat, seat memory settings, air bags, etc. Professional installation, or detailed knowledge, on newer cars is strongly recommended. We also recommend custom installation to gain the ideal seating position for your tastes.

Built from a tubular steel frame, this reclining seat is designed for comfort and support in spirited driving. Equally at home on the street and the track, you will find the bolstering in just the right places. All of this without losing the convenience of a tip-forward design allowing access to the rear seats.

Covered in black Spacer fabric with Carbon Fiber look vinyl patches to protect the heavy wear areas. TAKATA Logo embroidered on front and back of the headrest.

This is a bottom mount seat.

FEATURES:

• Manual Dual-Sided recline, capable of infinite recline
• Integrated Head Rest
• Rugged Forward Tilt mechanism for back seat access
• Breathable & cool Spacer fabric
• Vinyl wear patches for long life

SPECIFICATIONS:

• Tubular steel frame
• Tested to ECE R17/FMVSS 207 and ADR 3
• Base mount system
• Weight: 29lbs.

This is an OMP performance RS-PT2 Fiberglass racing seat. The seat internal frame is fiberglass and the entire seat upholstery is velour material. Fiberglass gives strength and light weight and the velour adds to the comfort of the seat. The main backrest pads and leg pad are both exchangeable with different sized pads for a more custom fit. The large shoulder harness slots allow for a variety of driver heights.

*Made to order, extended wait and shipping times may occur.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

The Sportster CS seat is everything you wanted in a street sport seat. This seat doesn't just look cool - it's also a functional ergonomic improvement. This seat goes above and beyond any standard BMW seat to grip your body and keep you planted in the seat. Your whole body is supported - aggressive side and hip bolsters combine with wide shoulder supports and integrated headrest to properly support and protect your body during extreme driving. But Recaro has also focused on comfort by contouring the backrest to the natural shape of the human spine. The padding is thick and dense and the seat cushion has a built-in shock absorbing design. This seat will accept a standard 3-point seatbelt as well as a 4-point harness. The backrest folds forward for easy access to rear seats in a coupe body. The Sportster CS is the obvious choice, even for manufacturers like BMW, for a premium and functional ultra-sport seat.

Feedback from a Sportster CS user: "The phenomenological aspect that struck me the most, however, is just how much more a part of the car you feel when you are harnessed into these seats! I got a thrill from driving that I haven't had since I was in high school! It was that dramatic a change. The stock seats now seem like puffy cushions that float in disconnected fashion from the car and its movements. With the Recaros, you are one with the Beast. If I had known how dramatic a difference they would make, they would have been the first mod I made, without a doubt."

Seat Specs: Fitment notes:

This is a bottom-mount seat with a Recaro seat adapter included. A vehicle-specific floor adapter plate is still required. This seat will attach to either a set of sliders or be fixed in place directly to the floor plate (non adjustable).

This seat is designed mainly for street use. However, depending on the car model, various modifications and fabrication may be required to retain any of the original seat features. This is more of an issue on newer cars with integraged occupancy sensors, power, seat memory settings, air bags, etc. Professional installation, or detailed knowledge, on newer cars is strongly recommended. We also recommend custom installation to gain the ideal seating position for your tastes.

The Recaro Speed is a street tuner seats inspired by Recaro's full motorsport seats. The Speed has very aggressive thigh and side bolsters with supportive shoulder extensions. This is a very capable and supportive seat with all of the attributes of a race seat but with ergonomic features that make it suitable for street use. This seat can be used with the standard 3-point seatbelt or 4-point harness. An option for a 5-point is available. This seat is very very close to the seats used in the special edition E30 M3 Sport Evolution model.

Seat Specs: Fitment notes:

This is a bottom-mount seat and seat adapters are included. However, a vehicle-specific floor adapter plate is still required. The seat will attach to either a set of sliders or be fixed in place directly to the floor plate (non adjustable).

This seat is designed mainly for street use. However, depending on the car model, various modifications and fabrication may be required to retain any of the original seat features. This is more of an issue on newer cars with integraged occupancy sensors, power and heat, seat memory settings, air bags, etc. Professional installation, or detailed knowledge, on newer cars is strongly recommended. We also recommend custom installation to gain the ideal seating position for your tastes.

Sliding rail kit to be mounted between the seat mount and the seat.

The Recaro Speed S seat is a street tuner seat inspired by Recaro's full motorsport seats but with lower cushion height to make it easier to get in and out. The Speed S has the same aggressive side bolsters with supportive shoulder extensions as the standard Speed seat. This is a very capable and supportive seat with all of the attributes of a race seat but with ergonomic features that make it suitable for street use. This seat can be used with the standard 3-point seatbelt or 4-point harness.

Seat Specs: Fitment notes:

This is a bottom-mount seat and seat adapters are not included. A vehicle-specific floor adapter plate is required. The seat will attach to either a set of sliders or be fixed in place directly to the floor plate (non adjustable).

This seat is designed mainly for street use. However, depending on the car model, various modifications and fabrication may be required to retain any of the original seat features. This is more of an issue on newer cars with integraged occupancy sensors, power and heat, seat memory settings, air bags, etc. Professional installation, or detailed knowledge, on newer cars is strongly recommended. We also recommend custom installation to gain the ideal seating position for your tastes.

OMP racing seat with a perforated Carbon fiber molded shell and high protection shoulder and shaped headrest, designed for comfortable driving. Higher side bolsters for lateral leg support. Constructed with fire-resistant Airtex material and velour upholstering. Shell is predrilled to allow cooling kit installation.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards

Sporty 3-spoke OMP Racing GP steering wheel in 330mm diameter. Anodized aluminum center with OMP horn button and black leather-like polyurethane rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have contours for resting your thumbs to give you more leverage and grip. The grip itself is textured at the 9 and 3 positions for extra control of the steering wheel. The 330mm size is on the small size compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

This OMP racing seat mounting bracket is made to specifically to secure a racing seat in your E46 Sedan. Using stock mounting points, it eliminates the need to weld or modify your floor in any way. Using stock mounting positions is also safer in that they are proven to hold up by the manufacturer in crash tests when the car is designed. Poorly mounted brackets could cause thin metal to tear, split, or buckle if not properly reinforced, leading directly to injury in critical situations.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Fits:
1999-2005 BMW E46 Sedan

The R-922X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9222 Features

• Fits seats between 365mm to 429mm wide at the side mount mounting point
• Uses factory sliders, power or manual 
• 7lbs
• 304 Stainless steel
• Black wrinkle powder coat finish 
• Includes provisions for fir extinguisher mount(R-2295)

*Note for use with power sliders BMW switch 61311381205 is needed*

If additional lower back support is needed for those extra long days in the racing seat, OMP offers the Racing Seat Lumbar Cushion. Measuring in at 10" by 5" by 2", it is fastened to the velour fabric of the seat with Velcro strips, it can be adjusted to exactly where you need it. The pad itself is covered with the same velour flame-retardant material as the seat and is embroidered with an OMP logo.

Motion Motorsport takes the struggle out of centering your race seat with their exclusive SLOTTED side bracket mounts. These side mounts bolt to your seat shell just like any other side mount. But the bottom bolts to your sliders or floor mount through their innovative slotted inserts. There's no more re-drilling or hogging out holes to get everything to line up. Loosely install the brackets, center your seat, then tighten the screws on the brackets. You won't have to pull the seat in and out while you make tiny adjustments. The rotating slotted design allows the brackets to 'float' into the position you want. And once tightened they will not move or come out of position. These brackets have been thoroughly tested with all FIA-spec seats for bolt spacing, most common seat sliders, and compatible with matrix-style and other floor mount designs. The aluminum material meets or exceeds all FIA recommendations and are powdercoated in matte black.

One other trick feature is the driver and passenger specific offsets to the brackets. The bends are made to place the seat as close to the transmission tunnel as possible (also dependent on floor mount design). Most other side mounts are universal and actually the same piece flipped around with the proper holes drilled. But this does not offset the seat at all and you can end up with an annoying offset from the center of the seat to the steering wheel. Choose from a driver's or passenger's side bracket set below.

Price is for one pair of side mounts.

Allows mounting of any variable width extinguisher mount, for use with seats 380-440mm wide 

For use with R-924X, R-925X, R-926X, R-928X Series side mounts 

This is an OMP performance ARS-R Fiberglass racing seat. The seat shell is molded fiberglass and the seat upholstery is velour and Airtex material. Fiberglass gives strength and light weight and the Airtex increases breathability of the seat. The main backrest pads and leg pad are both exchangeable with different sized pads for a more custom fit. The large shoulder harness slots allow for a variety of driver heights.

*Made to order, extended wait and shipping times may occur.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

The Cross Sportster CS seat is everything you wanted in a high quality street tuner seat. This seat doesn't just look cool - it's also a functional ergonomic improvement. The Cross Sportster is similar to the legendary Sportster CS but with smaller hip bolsters to make ingress/egress easier. All of the other features of the Sportster CS carry over - aggressive side bolsters, wide shoulder supports and integrated headrest to properly support and protect your body during spirited driving. Recaro has also focused on comfort by contouring the backrest to the natural shape of the human spine. The padding is thick and dense and the seat cushion has a built-in shock absorbing design. This seat will accept a standard 3-point seatbelt as well as a 4-point harness. The backrest folds forward for easy access to rear seats in a coupe body.

Feedback from a Sportster CS user: "The phenomenological aspect that struck me the most, however, is just how much more a part of the car you feel when you are harnessed into these seats! I got a thrill from driving that I haven't had since I was in high school! It was that dramatic a change. The stock seats now seem like puffy cushions that float in disconnected fashion from the car and its movements. With the Recaros, you are one with the Beast. If I had known how dramatic a difference they would make, they would have been the first mod I made, without a doubt."

Seat Specs: Fitment notes:

This is a bottom-mount seat with a Recaro seat adapter included. A vehicle-specific floor adapter plate is still required. This seat will attach to either a set of sliders or be fixed in place directly to the floor plate (non adjustable).

This seat is designed mainly for street use. However, depending on the car model, various modifications and fabrication may be required to retain any of the original seat features. This is more of an issue on newer cars with integraged occupancy sensors, power, seat memory settings, air bags, etc. Professional installation, or detailed knowledge, on newer cars is strongly recommended. We also recommend custom installation to gain the ideal seating position for your tastes.

The R-922X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9223 Features

• Fits seats between 365mm to 429mm wide at the side mount mounting point
• Uses factory sliders, power or manual 
• 7lbs
• 304 Stainless steel
• Black wrinkle powder coat finish 
• Includes provisions for fir extinguisher mount(R-2295)

*Note for use with power sliders BMW switch 61311381205 is needed*

The best all-around Recaro race seat. The Profi line of seats are fixed-back fiberglass with slots for racing harnesses. It's fully FIA approved which makes it suitable for nearly all ranges of racing series or for a track-only car. The sizing and shape of this seat makes it suitable for drivers of all shapes and sizes. This is the larger XL seat that is over one inch larger in the torso area than the standard Profi SPG seat. This is a side-mount design and requires side mount brackets and vehicle-specific floor adapter. Sliders and additional seat cushions optional.

Seat Specs:

Multi hole aluminium seat bracket in compliance with FIA Appendix J art. 253. New design, minimum 16 different positions. Length: 400 mm Thickness: 6 mm

Recaro makes their own floor adapter and slider kit for some BMW models. This is the most complete and OEM-like way of installing a Recaro street (bottom-mount) seat in your car.

Each Recaro kit comes with a floor mount adapter specific and correct for the chassis. In some cases they even use an OE BMW seat frame. The kit also includes Recaro sliders to bolt to the floor mount and brackets for re-mounting your original seatbelt receptacle. Your bottom mount seat then bolts to the sliders. All hardware and instructions are included. On some models additional trim is also included to hide the sliders and brackets and make for a more factory OEM appearance.

Note about fitment: the Recaro adapters tend to be higher than a Macht Schnell or other 'matrix' style floor mount designs. In most cases the Recaro is over one inch taller. This owes in part because Recaro builds additional room for the feet of rear seat passengers and in some cases they use the OE seat frame. If you're an above average height or want the seats to be as low as possible, the Macht Schnell floor mounts would be a better option.

Sold per seat. Choose Left or Right in the options list below.

This item fits the following BMWs:
1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 except convertible models