BMW Engine Parts for BMW E46 M3 S54 (1999-2005)

This top-end gasket set covers the cylinder head on the S54 engine used in the E46 M3, Z3 M Roadster/M Coupe, and E85/E86 Z4 M Roadster, M Coupe. If you're pulling the head, intake manifold, or doing any other upper end engine work this set can be a time and money saver. This set includes all of the commonly replaced gaskets, seals, and o-rings when overhauling the head. It's also a useful kit to have and dip into any time you're doing upper end engine work. Not having a critical seal or gasket on hand can ruin your work and this gasket set can prevent that from happening. This Victor Reinz set includes the head gasket.

BMW #QtyDescription

071199035461left timing rail upper bolt seal

071199630724VAN0S oil line seal ring

071199631292crankcase vent banjo bolt seals

071199632522screw plug seal ring

071199633421right upper timing rail bolt seal ring

071199634181timing chain tensioner seal ring

111214373952valve cover stud grommet seal

1112783097213valve cover stud grommet seal

111278312716spark plug hole profile gasket

111278320341main valve cover gasket

111278370241oil fill cap seal ring

111278370251crankcaske oil separator seal ring

111417367581VAN0S-camshaft plate o-ring

111578309661crankcase oil separator o-ring, large

111578321191crankcase oil separator plug o-ring

113113173181inside o-ring for internal VAN0S regulating valve

113490644572valve stem seal, 2 sets = 24 valves

113678319381VAN0S unit profile gasket

114113060821outside o-ring for internal VAN0S regulating valve

115313184021thermostat-to-water pump o-ring

115378307083coolant pipe o-ring gasket

115378307092thermostat housing connector o-ring

116114076951intake bellows o-ring profile gasket

116178301041intake bellows-to-airbox gasket

116278306676exhaust manifold port gasket

117275052591air pump valve profile gasket

121417483982camshaft position sensor o-ring

135478314836throttle body o-ring

136414374746fuel injector o-ring, upper

136478306116fuel injector o-ring, lower

111278359181head gasket

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster Z3 M Coupe
2006-2008 E85 BMW Z4 M Roadster Z4 M Coupe

Rally Road Productions, Inc. is a team supported by a group of people with great abilities in their area of expertise. From the "web guy" and driving instructor friends, to owners of various machine shops, they have surrounded ourselves with people that can be trusted to create and manufacture quality products. This is the key to ensuring everything that they sell will perform as it was intended. The goal is to increase customer satisfaction and make the customization or performance enhancement of your vehicle a more enjoyable venture.

This oil cooler system is race tested and proven to outflow the euro M3 oil filter housing. Additionally, this particular system uses a sealing mechanism to direct the oil flow through the cooler lines and then through the oil filter.  Other cooler caps do not provide this seal and therefore the external oil coolers and lines act as a "balloon".  The lines and cooler are pressurized, but oil does not flow through them.  Flowing oil means it is being cooled and not just acting as an external reservoir.

Flow testing reveals that the oil cooler cap will outflow the Euro M3 Oil Filter Housing by more than 80% at the same, pressure, RPM, and oil temperature. In the upper RPM range, there is nearly a 100% improvement in flow from the RallyRoad oil cooler cap when compared to the Euro M3 oil filter housing.  This is a massive improvement over OE and is a worthwhile upgrade, especially in engines that see severe duty.

Features:

• -8AN o-ring ports to provide a leak free fitting without the use of Teflon tape or sealant used by other oil cooler caps.
• Viton o-rings are used throughout to maintain function and sealing in a high-temperature oil environment.
• Use of the stock filter cap bolt to reduce cost and simplify installation.
• An internal sealing mechanism to direct oil flow through the oil cooler and through the filter.
• 1/8" NPT side port for external oil pressure gauge.

Kit Includes:

• Oil filter cap with fittings
• Oil filter sealing ring
• BMW MANN Oil Filter and gasket

This part fits the following BMWs
1992-1999 E36 323i 325i 325is 328i 328is