Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

• Proprietary methods to lay wet carbon for a stronger and lighter product
• UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
• Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
• No black paint is used to hide imperfections along detail edges and creases.
• Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2002-2006 BMW E46 325i 325xi 328i 330i 330xi

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

• Proprietary methods to lay wet carbon for a stronger and lighter product
• UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
• Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
• No black paint is used to hide imperfections along detail edges and creases.
• Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2003-2006 BMW E46 325ci 330ci

9cm "Classic" Universal Fender Flares - Pair are expertly crafted by Clinched from high-quality, impact-resistant ABS plastic, a material commonly used for OEM bumpers. These fender flares are designed to be versatile and can fit a wide range of makes and models with minimal customization.

• Durable Construction: Made from high-quality ABS plastic, offering strength and lightweight properties.
• Universal Fit: Can be installed on various vehicle makes and models with minor adjustments.
• Customizable Appearance: Can be blended with the vehicle body or left with exposed rivets and edges for a distinctive look.
• Easy Installation: Requires drilling and cutting of original fenders; use a heat gun to mold the flares to factory body lines.
• Pliable Material: More flexible compared to fiberglass flares, allowing for easier customization.

These fender flares are installed using rivets and bolts, ensuring a secure fit. The pliable nature of the ABS plastic allows for easy molding and adherence to your vehicle’s contours.

URO Convertible Top Position Sensor - BMW E46 E64

Engineered to meet OE specifications, the URO Convertible Top Position Sensor accurately determines the position of the convertible top, ensuring smooth and reliable operation for BMW E46 and E64 models. It restores normal open/close functionality, enhancing the convenience and performance of your convertible top. Constructed with high-quality materials, it withstands summer cabin heat and harsh conditions, while alloy conductors minimize electrical resistance for precise and accurate operation. Supported by a 24-month unlimited mileage warranty, this sensor is a trusted solution for maintaining your BMW’s convertible top system.

Key Benefits:

• Calibrated to OE specifications for accurate convertible top positioning.
• Restores normal open/close operation for enhanced convenience.
• High-quality materials withstand summer cabin heat and harsh conditions.
• Alloy conductors minimize electrical resistance for precise operation.
• Includes a 24-month unlimited mileage warranty for peace of mind.
• Compatible with BMW E46 and E64 models.

Clinched Fender Flares: Versatile and Impact-Resistant

Revamp your vehicle's appearance with Clinched Fender Flares, expertly crafted from high-quality, impact-resistant ABS plastic, ensuring strength and lightweight construction similar to OE bumpers. Designed for versatility, these universal flares offer compatibility with various makes and models, allowing easy installation with minor adjustments. Customize your vehicle's look by blending the flares seamlessly with the car's body or leaving them with exposed rivets and edges.

Clinched Flares are installed using rivets and bolts, requiring drilling and cutting of the original fenders for installation. Heat the flares with a heat gun or hair dryer to mold them precisely along the factory body lines. These flares stand out due to their high pliability, distinguishing them from fiberglass alternatives.

Clinched Universal Fender Flares

Crafted from high-quality, impact-resistant ABS plastic, Clinched manufactures universal fender flares suitable for various makes and models, including BMWs. These flares, akin to OE bumpers, offer exceptional strength combined with lightweight properties. Universally designed, they require minimal customization for installation. You have the option to seamlessly blend them with your car's body or leave them with exposed rivets and edges for a distinct look. Please note, installation involves drilling and cutting the original fenders. Using a heat gun (or hair dryer) aids in molding the flares to conform to your vehicle's factory body lines, thanks to their high pliability, setting them apart from fiberglass alternatives.

Clinched Fender Flares

Clinched specializes in crafting fender flares using high-quality, impact-resistant ABS plastic, akin to the material used in OE bumpers. These flares exhibit:

• Sturdiness and lightweight design
• Universality for installation on various vehicle makes and models
• Options for blending with the car's body or showcasing exposed rivets and edges

The installation of Clinched Flares necessitates the drilling and cutting of original fenders. By using a heat gun or hairdryer, the flares can be shaped to fit seamlessly along the factory body lines, highlighting their exceptional pliability compared to fiberglass alternatives.