BMW Internal Engine Parts for BMW 3 Series E46 (1999-2005)

Supertech 6mm Exhaust Valve Stem Seal - Viton - BMW S54 S52 S50 M54 M...

T#:641010

Part#: VS-VBM6E

In Stock

$ 1.99 USD

Add to Wish List

Qty

$ 1.99 USD

Add to Wish List

Looking to replace your valve stem seals due to leaks, cracks, splits, or even during an upgrade of your camshafts, valve springs, or valves? Supertech valve stem seals are the way to go! This cheap but effective seal replaces the stock BMW seals that are notoriously prone to issues due to heat cycles and chemicals which cause the seals to become weak and brittle. Supertech seals offer a significantly longer life span and are resistant to both heat and chemicals thanks to their use of Viton or Polyacrylic construction (dependant on valve type). That means less time in the garage and more time on the street or track! These seals are also great for anyone who is looking to upgrade to dual valve springs thanks to the seal's overall thinner outer diameter! Guide OD: 8.8mm/.347" Seal OD: 12.2mm/.480"

Show More Show Less

Supertech 6mm Intake Valve Stem Seal - Polyacrylic - BMW S54 S52 S50 ...

T#:641011

Part#: VS-VBM6I

In Stock

$ 1.99 USD

Add to Wish List

Qty

$ 1.99 USD

Add to Wish List

Looking to replace your valve stem seals due to leaks, cracks, splits, or even during an upgrade of your camshafts, valve springs, or valves? Supertech valve stem seals are the way to go! This cheap but effective seal replaces the stock BMW seals that are notoriously prone to issues due to heat cycles and chemicals which cause the seals to become weak and brittle. Supertech seals offer a significantly longer life span and are resistant to both heat and chemicals thanks to their use of Viton or Polyacrylic construction (dependant on valve type). That means less time in the garage and more time on the street or track! These seals are also great for anyone who is looking to upgrade to dual valve springs thanks to the seal's overall thinner outer diameter! Guide OD: 8.8mm/.347" Seal OD: 12.2mm/.480"

Show More Show Less

Schrick Intake Camshaft - E46 M3, MZ3, MZ4 (S54) - 288 Degree, 12.5mm...

T#:338222

Part#: TMS3572

Ships on Jan 15, 2027

Sale - Save 28% $ 5,600.99

This product was last offered at the strikethrough price on
07-08-2026

Starting at $ 4,048.04 USD

Add to Wish List

Sale - Save 28%

$ 5,600.99

This product was last offered at the strikethrough price on
07-08-2026

Starting at $ 4,048.04 USD

Add to Wish List

E46 M3 Schrick 288 Degree Intake Camshaft with 12.5mm valve lift. Originally desinged for the M3 CSL but works great in a standard M3. A new rocker arm is required (Schrick or new BMW part #11337833259). This is a more agressive cam that the Schrick 280 degree cam that we also offer for the E46M3

BMW Schrick Technical Specs

Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe

Show More Show Less

ARP Ultra-Torque Fastener Assembly Lubricant (Select Your Size) ...

T#:338571

Part#: TMS1733

In Stock

Starting at $ 1.99 USD

Add to Wish List

Starting at $ 1.99 USD

Add to Wish List

If you are using a premium fastener, such as the ARP brand rod bolts, head bolts, or main bolts, then you will want this assembly lube. Made to be used to precisely duplicate all ARP fastener preload specifications.

Show More Show Less

Performance Rod Bearing Set - M54

T#:26171611

Part#: 5150-HPRBS-M54

Ships in 4 Business Days

$ 251.99 USD

Add to Wish List

Qty

$ 251.99 USD

Add to Wish List

5150 High-Performance Coated Rod Bearing Sets are made for the demands of high-performance engine builds. Treated shells and coated by Calico to reduce friction, these bearings allow your engine to generate more power and resist "spinning" under stress. These coated bearings also have thermal resistant properties that not only perform in high HP applications like forced induction or race use but also help prevent sudden engine failure in the event of oil pressure loss. 5150 bearings have proven themselves on and off the track, lasting longer and outperforming other bearings on the market.

Show More Show Less

CP-Carrillo Connecting Rod Set M5X Pro-Xtreme

T#:26204921

Part#: CAR-CRS-S52-XT

Ships in 4 Business Days

$ 2,099.99 USD

Add to Wish List

Qty

$ 2,099.99 USD

Add to Wish List

The 5150 AutoSport Pro-Xtreme Connecting Rods, made by CP-Carrillo, are designed to handle extreme horsepower and high RPM applications for BMW M50 Non-VANOS, M52, S50, S52, and M54 engines with 135 mm Rods. Constructed from high-strength, aircraft-grade steel, these connecting rods are engineered to withstand the forces generated by high-powered engines. The Pro-Xtreme design is specifically tailored to handle up to 2000 horsepower, making these rods suitable for high-performance turbo/drag racing or street/strip applications. They are also designed to handle high engine speeds of up to 9500 RPM, which is necessary for achieving maximum power output. Each connecting rod is precisely fabricated to meet the demands of high-performance engines using advanced manufacturing techniques such as computer-aided design (CAD) and finite element analysis (FEA). The Pro-Xtreme Connecting Rods are designed to be durable, reliable, and capable of handling the extreme stresses and forces generated by high-horsepower and high-rpm engines. Please note that these 135 mm connecting rods are designed to fit M50 Non-VANOS, M52, M52TUB28, S50 U.S, S52 U.S, and M54B30 135mm Rod engines. They will NOT fit M50-VANOS engines, as they require 140 mm Rods.

Show More Show Less

King Performance BMW S54 Rod Bearings - Set - .025

T#:25706111

Part#: CR6877XP0.25

Ships in 2 Business Days

$ 300.99 USD

Add to Wish List

Qty

$ 300.99 USD

Add to Wish List

King's Racing Line of Performance Engine Bearings are for enthusiasts looking for an upgraded, coated connecting rod bearing to replace their OE bearings with. Constructed of a tri-metal base, these bearings are coated in a polymer-based coating to create a thermal barrier between your connecting rods and crankshaft. Complete Set of Bearing Shells - .025 Oversize

Show More Show Less

JE Piston BMW S54B32 11.5:1 Single Piston 86.50mm

T#:33679693

Part#: 297172S

In Stock at Vendor

$ 1,324.99 USD

Add to Wish List

Qty

$ 1,324.99 USD

Add to Wish List

The BMW JE Piston S54B32 11.5:1 Piston Single 86.50mm is a high-performance piston designed to optimize the power and efficiency of BMW S54 engines. With an 11.5:1 compression ratio, this piston is ideal for those seeking to push the performance limits of their vehicle. Built from top-quality materials, it offers superior durability, making it suitable for both street and track applications. Available at Turner Motorsport, this piston ensures enhanced reliability and a precise fit for BMW S54 engines.

This piston is designed to withstand the demands of high-performance driving while improving overall engine combustion and efficiency. It is an excellent choice for BMW owners looking to improve engine performance, longevity, and power output. Detail: 86.50 mm Bore – 1.220 in. CH, -9.40 CC

Show More Show Less

CP-Carrillo Connecting Rod Set - S54

Upgrade Your Connecting Rods in Your High Horsepower S54!

T#:26171622

Part#: CAR-S54-SCR

Ships in 3 Business Days

Starting at $ 2,149.99 USD

Add to Wish List

Starting at $ 2,149.99 USD

Add to Wish List

CP-Carrillo's connecting rods for the BMW S54 engine are specifically engineered to serve as direct replacements for BMW part numbers #11247834437, #11247831924, #11247834310, and 11247831331 in the BMW S54B30, S54B32, S54B33, S54B34, and S54B35 engines, with a length of 139 mm. These Carrillo connecting rods boast a range of impressive features: Crafted from a special chrome-moly based alloy, ensuring strong and durable forged rods. Their lightweight design significantly reduces mass compared to standard rods, optimizing engine performance. These rods have demonstrated exceptional strength and performance in racing environments, vouching for their reliability. Carrillo maintains stringent quality control measures, resulting in tight tolerances and precision balancing for superior performance. Each set is meticulously matched and balanced, ensuring consistent and smooth operation. The connecting rods come equipped with high-quality, non-stretch WMC rod bolts, guaranteeing stability under high-stress conditions. For those seeking even higher performance, there is an option to upgrade to CARR bolts. In conclusion, Carrillo connecting rods stand as the top choice for racers who demand the utmost in performance and reliability from their engines. With a track record of excellence and a suite of advanced features, these rods are the epitome of quality and precision for high-performance applications.

Show More Show Less

JE Piston BMW S54B32 12.5:1 Single Piston 86.50mm

T#:33679697

Part#: 297174S

In Stock at Vendor

$ 251.99 USD

Add to Wish List

Qty

$ 251.99 USD

Add to Wish List

JE Pistons BMW S52B32 USA Piston – 12.5:1 Compression 86.50 mm Bore – 1.220 in. CH, -5.00 CC is an advanced piston engineered for high-performance BMW engines. Specifically designed for the S52B32 engine, this piston delivers exceptional compression and power, making it a must-have for performance enthusiasts. Available at Turner Motorsport, this USA-made piston is perfect for drivers who demand both reliability and peak engine performance.

Show More Show Less

SuperTech Dual Valve Spring Upgrade Kit w/ Steel Retainers - 67lbs - ...

T#:51426477

Part#: SPRKH100DRBMST

In Stock at Vendor

$ 833.99 USD

Add to Wish List

Qty

$ 833.99 USD

Add to Wish List

Crafted from premium Superclean Chrome Silicon Vanadium Steel alloy, these valve springs offer exceptional performance and durability even at high RPMs. CAD engineering ensures that the wire stress levels remain within defined limits for long-lasting durability, even under extreme racing conditions. Advanced computer software allows Supertech to meticulously control harmonics, ensuring optimal performance. Manufactured with high-quality military-certified Steel, the retainers are CNC machined to provide a precise fit, guaranteeing longevity and reliability.

Show More Show Less

T#:33646305

Part#: 297171S

In Stock at Vendor

$ 251.99 USD

Add to Wish List

Qty

$ 251.99 USD

Add to Wish List

The BMW JE Piston S54B32 9:1 Piston Single 87.00mm is a premium performance upgrade designed for BMW enthusiasts looking to enhance engine durability and output. Specifically crafted for the BMW S54 engine, this piston ensures optimal compression and power, providing the necessary strength to handle high-performance driving conditions. Available through Turner Motorsport, this piston is engineered to meet the demands of both street and track driving, offering exceptional reliability.

The precision-crafted piston ensures a perfect fit, allowing for improved combustion efficiency and overall engine performance. It's the ideal choice for drivers seeking to boost their BMW’s power and longevity.

Show More Show Less

Schrick Exhaust Camshaft - E46 M3, MZ3, MZ4 (S54) - 280 Degree, 14.0m...

T#:338217

Part#: TMS201495

Ships on Jan 15, 2027

Starting at $ 3,804.99 USD

Add to Wish List

Starting at $ 3,804.99 USD

Add to Wish List

E46 M3 Schrick 280 Degree Exhaust Camshaft with 14.0mm valve lift. This is only for use in professionally-built E46 M3 race engines. Schrick has developed this ultra-aggressive S54 race cam with 280-deg duration and 14mm of valve lift. Because of the aggressive profile and specs of this cam, Schrick only recommends it be used with special custom pistons with deep valve reliefs. We strongly recommend this be professionally installed by an experienced engine builder to check clearances and fitment.

Schrick also requires valvetrain hardware to go along with this cam:
Schrick valve springs
Schrick rocker arms
Schrick upper and lower retainers

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster, Z3 M Coupe
2006-2008 E85 BMW Z4 M Roadster, Z4 M Coupe

Show More Show Less

Valve keeper for Audi/BMW/Opel 6mm stem Triple groove - Supertech ...

T#:26704985

Part#: KPR-VW6-T

In Stock

$ 1.99 USD

Add to Wish List

Qty

$ 1.99 USD

Add to Wish List

Forged Piston Set - BMW M54B30

T#:28836407

Part#: JE-FPS-M54B30

Ships on Oct 13, 2026

$ 2,654.99 USD

Add to Wish List

Qty

$ 2,654.99 USD

Add to Wish List

JE Forged Piston Set - M54 2.5L

T#:26038609

Part#: JE-FPS-M54

Ships on Oct 13, 2026

$ 1,399.99 USD

Add to Wish List

Qty

$ 1,399.99 USD

Add to Wish List

MAHLE PowerPak Piston Kit 87.25mm with Thermal Barrier Coating (TBC) ...

T#:2958768

Part#: 930286145T

Special Order: No Guaranteed ETA

$ 1,271.99 USD

Add to Wish List

Qty

$ 1,271.99 USD

Add to Wish List

Forged, 2618. Get the performance and reliability your S54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

Cat Cams M52TU B28 Sport Camshaft Set

T#:578586

Part#: 1304405

Special Order: No Guaranteed ETA

$ 1,642.99 USD

Add to Wish List

Qty

$ 1,642.99 USD

Add to Wish List

Made in Belgium, Cat Cams offer great performance at a reasonable price. Cat Cam offers cams in most popular enthusiast upgrade specs to ensure there is a option for what ever your power goal is.

Cat Cams M52TU B28 Turbo Conversion Camshaft Set

T#:25838979

Part#: 1304402

Special Order: No Guaranteed ETA

$ 1,642.99 USD

Add to Wish List

Qty

$ 1,642.99 USD

Add to Wish List

Schrick Camshaft Set - E46 323/328 M52TU - 248/248

T#:773

Part#: E46M52TUSCHRICK

Ships on Jan 15, 2027

$ 2,915.38 USD

Add to Wish List

Qty

$ 2,915.38 USD

Add to Wish List

M52TU Schrick Camshaft Set. 248 degree 10mm lift intake, 248 degree exhaust. Great for street use. Power gains across the board with calm idle. No need for upgraded valve train. Works perfect for 323 / 328!

BMW Schrick Technical Specs

Schrick Technical Information / Specs

This item fits the following BMWs:
1999-2000 E46 BMW 323i 323ci 328i 328ci
1999-2000 E39 BMW 528i
1999-2000 Z3 BMW Z3 2.3 Z3 2.8

Show More Show Less

Schrick Intake Camshaft - E46 M3, MZ3, MZ4 (S54) - 288 Degree, 14.0mm...

T#:338223

Part#: TMS201494

Back Ordered

Starting at $ 829.00 USD

Add to Wish List

Starting at $ 829.00 USD

Add to Wish List

E46 M3 Schrick 288 Degree Intake Camshaft with 14.0mm valve lift. This is only for use in professionally-built E46 M3 race engines. Schrick has developed this ultra-aggressive S54 race cam with 288-deg duration and 14mm of valve lift. Because of the aggressive profile and specs of this cam, Schrick only recommends it be used with special custom pistons with deep valve reliefs. We strongly recommend this be professionally installed by an experienced engine builder to check clearances and fitment.

Schrick also requires valvetrain hardware to go along with this cam:
Schrick valve springs
Schrick rocker arms
Schrick upper and lower retainers

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster, Z3 M Coupe
2006-2008 E85 BMW Z4 M Roadster, Z4 M Coupe

Show More Show Less

Schrick Camshaft Set - E46 M3, MZ3, MZ4 (S54) - 288/280 14mm Lift ...

T#:340424

Part#: TMS200186

Back Ordered

Starting at $ 3,261.73 USD

Add to Wish List

Starting at $ 3,261.73 USD

Add to Wish List

E46 M3 Schrick high-performance racing camshaft set - 288 degree intake and 280 degree exhaust. These camshafts are for use in professionally-built E46 M3 race engines. Schrick has developed these ultra-aggressive S54 race cams with 14mm of valve lift. Because of the aggressive profile and specs of this cam, Schrick only recommends them be used with special custom pistons with deep valve reliefs. We strongly recommend these be professionally installed by an experienced engine builder to check clearances and fitment.

Schrick also requires valvetrain hardware to go along with these cams:
Schrick valve springs
Schrick rocker arms
Schrick upper (titanium) and lower (steel) retainers

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster, Z3 M Coupe
2006-2008 E85 BMW Z4 M Roadster, Z4 M Coupe

Show More Show Less

Schrick Intake Camshaft - E46 M3, MZ3, MZ4 (S54) - 304 Degree, 12.5mm...

T#:338220

Part#: 0415E1040-00

Ships on Jan 15, 2027

Starting at $ 829.00 USD

Add to Wish List

Starting at $ 829.00 USD

Add to Wish List

E46 M3 Schrick 304 Degree Exhaust Camshaft with 12.5mm lift. This cam is much more agressive than the "standard" Schrick intake cams. A new rocker arm is required (Schrick or new BMW part #11337833259).

BMW Schrick Technical Specs

Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe

Show More Show Less

Schrick Camshaft Set - E46 M3, MZ3, MZ4 (S54) - 304/296 14mm Lift ...

T#:340425

Part#: TMS200183

Ships on Jan 15, 2027

Starting at $ 4,865.48 USD

Add to Wish List

Starting at $ 4,865.48 USD

Add to Wish List

E46 M3 Schrick high-performance racing camshaft set - 304 degree intake and 296 degree exhaust. These camshafts are for use in professionally-built E46 M3 race engines. Schrick has developed these ultra-aggressive S54 race cams with 14mm of valve lift. Because of the aggressive profile and specs of this cam, Schrick only recommends them be used with no VAN0S and with special custom pistons with deep valve reliefs. We strongly recommend these be professionally installed by an experienced engine builder to check clearances and fitment.

Schrick also requires valvetrain hardware to go along with these cams:
Schrick valve springs
New Schrick or BMW rocker arms
Schrick upper (titanium) and lower (steel) retainers

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster, Z3 M Coupe
2006-2008 E85 BMW Z4 M Roadster, Z4 M Coupe

Show More Show Less

Schrick Camshaft Set - S54 288/280 14mm Lift

T#:200186

Part#: TMS200186

Back Ordered

$ 3,261.73 USD

Add to Wish List

Qty

$ 3,261.73 USD

Add to Wish List

NOW LOCATED UNDER T#340424

Schrick Intake Camshaft - E46 M3, MZ3, MZ4 (S54) - 304 Degree, 14.0mm...

T#:338221

Part#: TMS201493

Ships on Jan 15, 2027

Starting at $ 2,432.99 USD

Add to Wish List

Starting at $ 2,432.99 USD

Add to Wish List

E46 M3 Schrick 304 Degree Intake Camshaft with 14.0mm valve lift. This is only for use in professionally-built E46 M3 race engines. Schrick has developed this ultra-aggressive S54 race cam with 304-deg duration and 14mm of valve lift. Because of the aggressive profile and specs of this cam, Schrick only recommends it be used with no VAN0S or with special custom pistons with deep valve reliefs. We strongly recommend this be professionally installed by an experienced engine builder to check clearances and fitment.

Schrick also requires valvetrain hardware to go along with this cam:
Schrick valve springs
Schrick rocker arms
Schrick upper and lower retainers

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster, Z3 M Coupe
2006-2008 E85 BMW Z4 M Roadster, Z4 M Coupe

Show More Show Less

Schrick Exhaust Camshaft - E46 M3, MZ3, MZ4 (S54) - 296 Degree, 14.0m...

T#:338219

Part#: TMS201492

Ships on Jan 15, 2027

$ 7,065.99

This product was last offered at the strikethrough price on
07-08-2026

Starting at $ 5,877.86 USD

Add to Wish List

Starting at $ 5,877.86 USD

Add to Wish List

E46 M3 Schrick 296 Degree Exhaust Camshaft with 14.0mm valve lift. This is only for use in professionally-built E46 M3 race engines. Schrick has developed this ultra-aggressive S54 race cam with 296-deg duration and 14mm of valve lift. Because of the aggressive profile and specs of this cam, Schrick only recommends it be used with no VAN0S or with special custom pistons with deep valve reliefs. We strongly recommend this be professionally installed by an experienced engine builder to check clearances and fitment.

Schrick also requires valvetrain hardware to go along with this cam:
Schrick valve springs
Schrick rocker arms
Schrick upper and lower retainers

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster, Z3 M Coupe
2006-2008 E85 BMW Z4 M Roadster, Z4 M Coupe

Show More Show Less

Schrick Exhaust Camshaft - E46 M3, MZ3, MZ4 (S54) - 280 Degree, 14.0m...

T#:23847549

Part#: 0415A180001

Special Order: No Guaranteed ETA

$ 1,876.99 USD

Add to Wish List

Qty

$ 1,876.99 USD

Add to Wish List

JE Piston BMW S54B32 12.5:1 - Single Piston 87.00mm

T#:33646293

Part#: 297119S

Back Ordered

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

The 12.5:1 compression JE piston for the S54b32 is designed to help maintain thermal efficiency and minimizes weight. Detail: 12.5:1 Compression 87.00 mm Bore – 1.271 in. CH, -8.70 CC

CP-Carrillo Pro-Xtreme Forged Piston Set Std. Size - S54

T#:26171645

Part#: CP-FPS-S54-XT

Back Ordered

Starting at $ 2,268.98 USD

Add to Wish List

Starting at $ 2,268.98 USD

Add to Wish List

CP-Carrillo sets the benchmark for premium aftermarket forged pistons. Crafted with high-strength, lightweight materials and cutting-edge engineering, this BMW S54 piston set boasts the following features: Lightweight Design: Constructed from forged aluminum alloy, CP-Carrillo pistons offer reduced weight, enhancing engine responsiveness and acceleration for a dynamic driving experience. Advanced Engineering: Leveraging state-of-the-art technology, CP-Carrillo engineers optimize combustion, fuel efficiency, and power output, ensuring peak performance in every application. Wide Configuration Range: With a variety of bore sizes and compression ratios available, CP-Carrillo provides options to tailor pistons to specific engine builds and performance objectives. Quality Construction: Each CP-Carrillo piston undergoes precision machining and rigorous testing to meet exacting standards, guaranteeing consistent quality and performance in every set. Engineered by one of motorsport's most respected names, CP-Carrillo pistons are the ultimate choice for the S54 engine, whether for street performance or track dominance. Piston Sets Include: Pistons Rings Pins Locks Spec Sheet Optional Extras: Skirt Coating - Adding a Protective Layer Between the Sides of the Piston and Cylinder Walls Dome Coating - Adding a Protective Layer to the Top of The Piston HD-Wrist Pins - A Must if You are Planning on Going Beyond 850 HP! X Forging - Reducing Rotational Mass By Moving the Wristpin Inwards and Shortening it While Increasing Overall Strength Please Note: It is essential to have all engine modifications performed by a qualified professional to ensure proper installation and optimal engine performance, safety, and reliability.

Show More Show Less

BMW S54B32 - 87.5MM Bore, 12.5:1 CR

T#:27171928

Part#: 297120

Back Ordered

$ 1,324.99 USD

Add to Wish List

Qty

$ 1,324.99 USD

Add to Wish List

JE Pistons Forged Piston Set of 6 – 87.5mm Bore – 11.5:1 CR – BMW E46 M3 S54B32 Maximize the performance of your BMW E46 M3’s S54B32 engine with this set of 6 JE forged pistons. Engineered for strength and high-revving capability, these pistons are built to withstand the demands of high-performance applications. 87.5mm Bore: Increased bore size for improved displacement and power output. Compression Ratio: 11.5:1: High-compression design enhances combustion efficiency and delivers more horsepower and torque. Forged Aluminum: Lightweight and durable, designed to handle high stress and heat, making it perfect for both street and track use. Precision Fit: Ensures seamless installation and compatibility with the BMW S54B32 engine, providing reliability under extreme conditions. Perfect for serious performance builds, these pistons offer a balance of durability, power, and efficiency.

Show More Show Less

CP-Carrillo Forged Piston Set - M54B28 Std. Size

For Vehicles With M54B25 Engine Only

T#:26071892

Part#: M54B25-CPP-84

Back Ordered

Starting at $ 2,206.98 USD

Add to Wish List

Starting at $ 2,206.98 USD

Add to Wish List

CP-Carrillo sets the benchmark for premium aftermarket forged pistons. Crafted with high-strength, lightweight materials and cutting-edge engineering, this BMW M54B25 piston set boasts the following features: Lightweight Design: Constructed from forged aluminum alloy, CP-Carrillo pistons offer reduced weight, enhancing engine responsiveness and acceleration for a dynamic driving experience. Advanced Engineering: Leveraging state-of-the-art technology, CP-Carrillo engineers optimize combustion, fuel efficiency, and power output, ensuring peak performance in every application. Wide Configuration Range: With a variety of bore sizes and compression ratios available, CP-Carrillo provides options to tailor pistons to specific engine builds and performance objectives. Quality Construction: Each CP-Carrillo piston undergoes precision machining and rigorous testing to meet exacting standards, guaranteeing consistent quality and performance in every set. Engineered by one of motorsport's most respected names, CP-Carrillo pistons are the ultimate choice for the M54B25 engine, whether for street performance or track dominance. Piston Sets Include: Pistons Rings Pins Locks Spec Sheet Optional Extras: Skirt Coating - Adding a Protective Layer Between the Sides of the Piston and Cylinder Walls Dome Coating - Adding a Protective Layer to the Top of The Piston HD-Wrist Pins - A Must if You are Planning on Going Beyond 850 HP! X Forging - Reducing Rotational Mass By Moving the Wristpin Inwards and Shortening it While Increasing Overall Strength Please Note: It is essential to have all engine modifications performed by a qualified professional to ensure proper installation and optimal engine performance, safety, and reliability.

Show More Show Less

CP-Carrillo Connecting Rod Set - S54 Pro-Xtreme

T#:26204927

Part#: CAR-CRS-S54-XT

Back Ordered

$ 2,299.99 USD

Add to Wish List

Qty

$ 2,299.99 USD

Add to Wish List

The 5150 AutoSport Pro-Xtreme Connecting Rods, made by CP-Carrillo, are designed to handle extreme horsepower and high RPM applications for BMW S54 engines with 139 mm Rods. Constructed from high-strength, aircraft-grade steel, these connecting rods are engineered to withstand the forces generated by high-powered engines. The Pro-Xtreme design is specifically tailored to handle up to 2000 horsepower, making these rods suitable for high-performance turbo/drag racing or street/strip applications. They are also designed to handle high engine speeds of up to 9500 RPM, which is necessary for achieving maximum power output. Each connecting rod is precisely fabricated to meet the demands of high-performance engines using advanced manufacturing techniques such as computer-aided design (CAD) and finite element analysis (FEA). The Pro-Xtreme Connecting Rods are designed to be durable, reliable, and capable of handling the extreme stresses and forces generated by high-horsepower and high-rpm engines.

Show More Show Less

JE Pistons Set Of 6 Pistons

T#:5122283

Part#: 297119

Back Ordered

$ 1,324.99 USD

Add to Wish List

Qty

$ 1,324.99 USD

Add to Wish List

JE Pistons are specifically engineered for extreme applications up to, and including, professional competition. In this environment, higher compression ratios, extreme boost levels and heavy nitrous usage necessitate the higher tensile strength 2618 aluminum alloy found in every JE Piston. *Application Specific Forgings for an Optimized, Uniform Crown Thickness *Contact Reduction Groove to Minimize Frictional Drag *Accumulator Groove for Increased Top Ring Stability and Sealing *CNC-Machined Side Relief with Lower Support Band for Additional Skirt Strength *Honed Pin Bores, Double Pressure Fed Pin Oilers and Wire Locks Included *JE ProSeal Piston Rings are included with your JE Pistons

Show More Show Less

Professional BMW M54B30 Piston Set Of 6 – 84.00 Mm Bore – 30.32 M...

T#:45210339

Part#: KE324M84

Back Ordered

$ 1,081.99 USD

Add to Wish List

Qty

$ 1,081.99 USD

Add to Wish List

CP Forged Piston Set - BMW M54B25 - 84mm Bore - 8.5:1 CR

T#:48367042

Part#: CPFPSM54B25848.5

Back Ordered

$ 1,399.99 USD

Add to Wish List

Qty

$ 1,399.99 USD

Add to Wish List

CP Carrillo offers arguably the highest qulaity pistons on the market for BMWs, engineered for maximum power and durability. Utilizing high-strength, lightweight materials and advanced engineering and design to ensure they are the perfect choice for any M54B25 engine and application, from street to track use.

Show More Show Less

Carrillo Pro-H Connecting Rods w/ WMC Rod Bolts - Set Of 6 - M52TU M5...

T#:20979680

Part#: SCR5150-6

Back Ordered

$ 1,845.99 USD

Add to Wish List

Qty

$ 1,845.99 USD

Add to Wish List

Carrillo rods are your number one option for performance connecting rods! If you are looking to upgrade your M52TU / M50 engine to handle greater power, we highly recommend these Pro-H connecting rods. Upgrading connecting rods in your engine can bring several benefits, particularly if you're looking to enhance performance, reliability, and overall durability. Here are some reasons why you might consider investing in upgraded connecting rods: Increased Strength: Upgraded connecting rods are often made from stronger materials, such as forged steel or titanium, compared to stock rods. This increased strength helps withstand higher levels of stress and load, making them suitable for high-performance applications. Improved Durability: Enhanced materials and manufacturing processes contribute to improved durability, reducing the risk of connecting rod failure, especially in high-stress situations. This is crucial for engines that undergo frequent high-speed or high-stress conditions, such as in racing or heavy-duty applications. Higher RPM Capability: Upgraded connecting rods are designed to handle higher engine RPM (revolutions per minute) without succumbing to fatigue or deformation. This is beneficial for those seeking increased horsepower and torque at higher engine speeds. Reduced Weight: Some upgraded connecting rods are engineered to be lighter while maintaining strength, contributing to a lower overall rotating mass in the engine. This can result in quicker revving, improved throttle response, and better overall performance. Enhanced Precision: Upgraded rods often undergo more precise machining processes, ensuring tight tolerances and improved balance. This precision can lead to better engine stability and reduced vibration, ultimately extending the life of engine components. Compatibility with High-Performance Builds: If you're planning on modifying your engine for increased horsepower through methods like turbocharging or supercharging, upgraded connecting rods become essential. They provide the necessary strength and reliability to handle the increased stresses associated with forced induction. Prevention of Catastrophic Failures: Upgrading connecting rods can act as a preventive measure against catastrophic engine failures. The improved strength and durability reduce the risk of a connecting rod breaking, which could lead to severe engine damage. Specifications: CC(in): 5.512 CC(mm): 140 Style: PRO-H Bolt Size: 3/8 Bolt Type: WMC Pin Width(in): 0.862 Pin Width(mm): 21.89 Big Width(in): 0.862 Bid Width(mm): 21.89 Big Bore(in): 1.8898 Big Bore(mm): 48.001 Pin Size: 22mm QTY: Set of 6 Founded by Fred Carrillo in 1963, Carrillo Connecting Rods was established with an unwavering commitment to uncompromising standards in manufacturing. Fred recognized that the relentless pursuit of speed demanded an equally fervent dedication to the quality of components. This foundational philosophy remains as strong today as it was at the inception of Carrillo in 1963. At CP-Carrillo, quality and pride are inseparable. The process of crafting a CP-Carrillo rod transcends mere forging, production targets, and shipping deadlines. The evolution of connecting rod design has become a collaborative effort involving skilled specialists. Each connecting rod is a precision symphony, with material specialists, forging experts, production craftsmen, design engineers, and engine specialists contributing their expertise and artistry. Customer feedback plays a pivotal role in our continuous product improvement. The close interaction between customers, engineering, and manufacturing fosters the most effective rod designs, enhancing accuracy and service—a value that becomes apparent during your engine build. CP-Carrillo's dimensional integrity stands unparalleled, setting a standard of excellence in the industry.

Show More Show Less

JE Piston BMW S54B32 9:1 Single Piston - 86.5mm

T#:33646299

Part#: 297170S

Back Ordered

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

JE Pistons BMW S52B32 USA Piston – 86.50 mm Bore – 1.220 in. CH, -25.10 CC is an exceptional choice for BMW enthusiasts seeking to boost their engine's performance. Offered by Turner Motorsport, this high-quality piston is specifically engineered for the BMW S52B32 engine, ensuring a precise fit and enhanced reliability. Its optimized design significantly increases compression, resulting in improved horsepower and torque for both racing and daily driving.

Increases compression ratio for better power output
Lightweight construction enhances overall engine performance
Designed for durability and longevity in high-stress environments
Ensures a perfect fit for the BMW S52B32 engine
Ideal for both competitive racing and everyday driving scenarios

Show More Show Less

JE Piston BMW S54B32 11.5:1 Single Piston 87.00mm

T#:33679694

Part#: 297173S

Back Ordered

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

The JE Pistons BMW S52B32 USA Piston – Compression 11.5:1 - 87.00 mm Bore – 1.220 in. CH, -9.90 CC is a premium piston upgrade designed for BMW performance enthusiasts who seek to improve their engine’s power and reliability. Engineered with precision, this piston offers an ideal balance of strength and lightweight construction, ensuring optimal performance under high stress. Available through Turner Motorsport, this piston is specifically tailored for BMW S52 engines, providing a seamless fit for enhanced engine efficiency.

Show More Show Less

BMW JE Piston - S54B32 9:1 Piston Single - 87.50mm

T#:33646279

Part#: 297116S

Back Ordered

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

JE Pistons are premium forged components tailored for racing and high-performance engines. Detail: 87.50 mm Bore – 1.271 in. CH, -30.00 CC

Project Cars

SELECT YOUR BMW

BMW Internal Engine Parts for BMW 3 Series E46 (1999-2005)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results