BMW Brakes & Brake Parts for BMW 3 Series E46 (1999-2005)

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E46 BMW brake package are all of the OEM equivalent components needed to replace your Front and Rear brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

• Pagid OEM Front & Rear Brake Pads
• Zimmerman Front & Rear Rotors
• New Front & Rear Wear Sensors
• Brand New Stainless Steel Set Screws
• Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
1999-2006 E46 BMW 330i, 330Ci, 330xi

135/BMW Performance brakes for your E36 and E46! This kit uses the factory BMW Performance Brembo 6-piston calipers (same as 135i) with E46 330-sized rotors (325x25mm / 12.8") for a bolt on braking upgrade. Everything comes complete - 6-piston calipers, rotors, custom caliper bracket, brake lines, and a pad sensor. Choose your preferred brake fluid and brake pads below (or call us for a recommendation).

Brake rotor options -

• OEM Pagid Coated - blank rotors with anti-corrosion coating
• Turner/Centric cross-drilled
• Turner/Centric slotted
• Turner/Cetnric cross-drilled & slotted
• BMW Peformance floating and cross-drilled
• ECS 2-piece floating with cross-drilled and slotted

Brake pad options -

• OEM Textar (same as stock 135i)
• Centric Posi-Quiet - nearly dust-free (Turner preferred!)
• Hawk Ceramic nearly dust-free
• Hawk HPS performance
• StopTech performance

This is a direct fit to all E36 and E46 (not E46 M3) and comes with a lot more braking power than standard (especially on non-M E36). Consequently there will be more front brake bias - the front brakes have more bite than before. During normal street driving all you will notice is that the brakes feel stronger. For track driving we recommend a more aggressive rear pad to balance the brake bias or a StopTech or Brembo big brake kit that has been properly engineered for the chassis (not a retrofit).

Requires 17" wheels and wheel spacers may be required depending on wheel spoke design. E46 Style 68 wheels shown are used with 5mm spacer.

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E46 BMW brake package are all of the OEM equivalent components needed to replace your Front and Rear brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

• Textar Front & Rear Brake Pads
• Zimmerman Front & Rear Rotors
• Febi Front & Rear Wear Sensors
• Brand New Stainless Steel Set Screws
• Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
1999-2006 E46 BMW 323i Touring, 323Ci Convertible, 325i/Ci 328i/Ci

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E46 BMW brake package are all of the OEM equivalent components needed to replace your Front brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

• Pagid OEM Front Brake Pads
• Zimmerman Front Rotors
• New Front Wear Sensors
• Brand New Stainless Steel Set Screws
• Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
1999-2006 E46 BMW 330i, 330Ci, 330xi

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E46 BMW brake package are all of the OEM equivalent components needed to replace your Front and Rear brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

• Textar Front & Rear Brake Pads
• Zimmerman Front & Rear Rotors
• Brand New Front & Rear Wear Sensors
• Brand New Stainless Steel Set Screws
• Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
E46 BMW 325xi

These pads were originally equipped on the Euro E46 M3 models and the US M3 ZCP, as well as Euro-spec M models from the 1990s. Owners of the E46 M3 will know that the stock pads are already quite 'aggressive' from the factory with a lot of initial bite. The initial bite was built into the pad to stop criticism of BMW's lack of 'performance' brakes. Instead of building the M models with exotic - and expensive - multi-piston calipers, BMW engineers turned up the braking power in their pads. These pads go a step further as the pads that originally came on the Euro E46 M3 and all E46 M3 ZCPs. For the street, these are excellent brake pads with excellent feel and performance. The only downside is the dust that comes from an organic pad. The problem with many aftermarket and OEM pads is that they do not match the same level of initial bite as the stock OE BMW pads. This can make the brakes feel 'weak' and 'numb' even though the pads are working properly. If you want to maintain your braking feel, these are the best to use.

Although these pads were originally designed for M cars, they fit other models as well, making them a great first-step upgrade for better braking.

Price is for one set of pads - enough to replace the pads on both front calipers.

If you are looking for front brake rotors, 2282445446

These front pads fit the following BMWs:
1988-1994 E32 BMW 735i 735il 740i 740il 750il (more aggressive fitment)
1989-1995 E34 BMW 525i 530i 535i 540i M5 (more aggressive fitment)
1994-1998 E36 BMW M3 (more aggressive fitment than US-spec)
1998-2002 Z3 BMW M Roadster M Coupe (more aggressive fitment)
1999-2005 E46 BMW 330i 330ci 330xi M3 (more aggressive fitment for 330)
2003-2008 E85 E86 BMW Z4 3.0si Z4 M Roadster M Coupe (more aggressive fitment for 3.0si)

These front brake rotor set are from CSL/ZCP E46 M3. They are vented 345x28 rotors, veined directionally for optimal cooling. OEM BMW 2-piece construction makes these rotors lighter than stock and with improved expansion and contraction to prevent rotor warp at high temps.

These rotors are cross-drilled allowing for faster heat dissipation and reduced brake fade on the track.

Turner Motorsport carries a massive catalog of brake parts for your BMW, with the vast majority of it stocked in our warehouse! 

These rotors require using CSL front brake caliper carriers 34112282619 if vehicle is not already equipped with ZCP or CSL brakes. Turner Motorsport recommends ECS Tuning's CSL brake caliper carriers if you are looking to save some money (the Genuine BMW CSL carriers are very pricy!)

If you are looking for CSL brake pads, 34112282995 

If you are looking for rear CSL rotors, 282303304

These brake pads are Genuine BMW and will perform exactly the same as the pads your vehicle came with from day one. Genuine pads offer a long life, low dust, and a consistent, comfortable feel that many aftermarket pads do not offer.

This set includes both the front and rear brake pads.

This item fits the following BMWs:
1992-1999 E36 BMW 323is/ic 325i/is/ic 328i/is/ic 318i/is/ic/ti
2000-2006 E46 BMW 323i/Ci 325i/xi/Ci 328i/Ci