BMW Brakes & Brake Parts for BMW 3 Series E46 (1999-2005)

Clear BMW chassis

Please ensure your correct model is selected

Some of the most critical components of your BMW are those of the brake system. Whether you are performing maintenance on your daily driver or stocking up on performance brakes for race season, keeping your brakes in working order is paramount to enjoying your car. At Turner Motorsport, we have everything you need to replace or upgrade your brake pads, brake rotors, brake lines, and brake fluid. Choose from our excellent selection of brake components to keep your BMW stopping confidently.

Sub-Categories

Sort By:

Pagid - Corporate Logo
T#:12192
Part#: 34416761291
In Stock
$ 46.99 USD
Free Shipping
$ 46.99 USD
Free Shipping
These Parking Brake Shoes for E46 3 series and E85 Z4 include the set of 4 shoes to replace both the left and right rear parking brake shoes. These are also referred to as the hand brake or emergency brake shoes.

This item fits the following BMWs:
2008-2013 E82 BMW 128i
2014+ F22 BMW 228i 228i xDrive M235i M235i xDrive
2014+ F23 BMW 228i 228i xDrive M235i
1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci
2006-2011 E90 BMW 325i 328i - Sedan
2007-2013 E92 BMW 328i Coupe
2012-2014 F30 BMW 328i Sedan
2012+ F30 BMW 320i 328d - Sedan
2013+ F32 BMW 428i Coupe
2013+ F33 BMW 428i Convertible - N20 engine only
2014+ F36 BMW 428i Gran Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si
Show More Show Less
Hawk - Corporate Logo
T#:216182
Part#: TMS216182
Ships on Sep 17, 2026
$ 496.99 USD
Free Shipping
$ 496.99 USD
Free Shipping
The Hawk DTC (Dynamic Torque Control) compound offers the highest friction coefficient of any Hawk pad. The DTC pads offer extremely high torque with aggressive controllable initial bite, superior release and torque control characteristics.
Show More Show Less
Hawk - Corporate Logo
T#:1105
Part#: TMS1105
Ships on Sep 17, 2026
$ 151.99 USD
Free Shipping
$ 151.99 USD
Free Shipping
A high-performance street pad with much-improved braking performance and significantly reduced brake dust. The HPS pads are perfect for drivers who don't want an ordinary replacement pad and want something that will hold up for aggressive street driving. With the HPS pads, you can expect: Increased stopping power even when the pads are cold Longer pad life Low dust compared with other performance pads Quiet operation In addition, the HPS pads are easy on rotors. And Hawk stands behind their pads with a limited lifetime warranty against defects.
Show More Show Less

Hawk - Corporate Logo
T#:16529
Part#: TMS16529
Ships on Sep 17, 2026
$ 359.99 USD
Free Shipping
$ 359.99 USD
Free Shipping
The Hawk DTC (Dynamic Torque Control) compound offers the highest friction coefficient of any Hawk pad. The DTC pads offer extremely high torque with aggressive controllable initial bite, superior release and torque control characteristics.
Show More Show Less

Hawk - Corporate Logo
T#:25005
Part#: TMS25005
Ships on Sep 17, 2026
$ 225.99 USD
Free Shipping
$ 225.99 USD
Free Shipping
The Hawk HT10 compound combines the high torque levels of the aggressive Hawk Blue with a revised friction compound that makes it easier to modulate and wears nicer on rotors. The HT10 remains consistent over a wide range of temps and can even work when cold. It's been a popular pad for racers looking for the performance of a Hawk Blue but is not as harsh on rotors.

Features and Characteristics:
+ very high torque performance
+ high temp range
+ up to 1300*F
+ mild abrasive metallic content does not require high heat to work
+ excellent modulation at high temps+ a 'friendly and easy' pad to use

REAR Brake Pad Applications:
2001-2006 E46 BMW 330i 330Ci 330Xi
2001-2006 E46 BMW M3
1999-2004 E39 BMW M5
2007 E60 BMW 525i
1995-2001 E38 BMW 740i, 740i Sport, 740iL
2004-2010 E83 BMW X3 2.5i, X3 3.0i, X3 3.0si
1999-2006 E53 BMW X5 3.0i, X5 4.4i
2007-2008 E85 BMW Z4 M Roadster, Z4 M Coupe
2000-2003 E52 BMW Z8 Roadster
Show More Show Less
Hawk - Corporate Logo
T#:16488
Part#: TMS16488
Ships on Sep 17, 2026
$ 279.99 USD
Free Shipping
$ 279.99 USD
Free Shipping
The Hawk DTC (Dynamic Torque Control) compound offers the highest friction coefficient of any Hawk pad. The DTC pads offer extremely high torque with aggressive controllable initial bite, superior release and torque control characteristics. These DTC-60 pads have less torque than the similar DTC-70 pads.
Show More Show Less

ATE - Corporate Logo
T#:638931
Part#: 34112157573
Ships in 1 Business Day
$ 65.55 USD
Free Shipping on orders $49 and up
Original ATE brake pads surpass the quality and safety standards of the European ECE-R90 directive. Their semi-metallic friction material helps to provide maximum braking performance right from the start in every driving situation. They also feature anti-noise shims for low braking noise in accordance with O.E. standards.
Show More Show Less
Hawk - Corporate Logo
T#:4747
Part#: TMS4747
Ships on Sep 17, 2026
$ 272.99 USD
Free Shipping
$ 272.99 USD
Free Shipping
The Hawk DTC (Dynamic Torque Control) compound offers the highest friction coefficient of any Hawk pad. The DTC pads offer extremely high torque with aggressive controllable initial bite, superior release and torque control characteristics.
Featuring:
  • High Intial Bite
  • Consistent torque over all pressures
  • Operating Range:400-1600�F; 204-871�C
  • High Temp & High Torque
  • Provides Superior Pad and Disc Wear
  • Excellent Torque Control
  • Excellent Modulation and Release Characteristics
  • Designed for High Deceleration Rates.

    REAR Brake Pad Applications:
    2001-2006 E46 BMW 330i 330Ci 330Xi
    2001-2006 E46 BMW M3
    1999-2004 E39 BMW M5
    2007 E60 BMW 525i
    1995-2001 E38 BMW 740i, 740i Sport, 740iL
    2004-2010 E83 BMW X3 2.5i, X3 3.0i, X3 3.0si
    1999-2006 E53 BMW X5 3.0i, X5 4.4i
    2007-2008 E85 BMW Z4 M Roadster, Z4 M Coupe
    2000-2003 E52 BMW Z8 Roadster
  • Show More Show Less

    Advanced Auto Fabrication - Corporate Logo
    T#:7608850
    Part#: 116102
    Ships in 3 Business Days
    $ 450.00 USD
    Free Shipping on orders $49 and up
    Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. AAF is proud to introduce their redesigned AAF E46 M3 Brake Cooling Duct Kit! Features: Extremely Light Weight – Less than 4 lbs in total! Ultra-High Airflow Inlets Tight Turning Radius Easy and Quick To Install Inexpensive to Buy and Maintain Durable for Racing Conditions Designed strong and lightweight these brake duct inlets include a massive 4' inlet. Ultimately this aids in providing higher airspeed and pressure to the brake rotor and thus better brake cooling. Inlets are manufactured by AAF in-house with a 3D printer to provide a strong and inexpensive part. Brake duct tubes included in this kit are made from lightweight and strong ABS plastic. Shaped for optimized airflow, these tubes also provide the ability for a tight turning radius even with large racing tires. Per AAF: for a SPEC E46 with the spec 255 Toyo tire, you can turn 1.5 turns from straight without hitting the tubes, which is more than enough for driving around the paddock. The tubes taper down to a 3' flex hose, to remain legal for SE46. Included in the kit are AAF's Brake Backing Plates as well. Kit Contents: Left and Right AAF 3D Printed Massive 4' Inlets Left and Right 4' to 3' Molded Tubes Two 13' Sections of Flex Hose Left and Right AAF Backing Plates All Attaching Hardware and Hose Clamps
    Show More Show Less

    BMW E36 E46 Front V5 Slotted Brake Rotors - Set (286x22)
    10X Entries Into Our F80 M3 Sweepstakes
    ECS - Corporate Logo
    T#:17704984
    Part#: 34116864060-S
    Ships in 5 Business Days
    Sale - Save 10% $ 345.99

    This product was last offered at the strikethrough price on
    06-14-2026

    $ 311.38 USD
    Free Shipping
    Sale - Save 10%
    $ 345.99

    This product was last offered at the strikethrough price on
    06-14-2026

    $ 311.38 USD
    Free Shipping
    Precision manufactured for consistent stopping power during high performance driving. Featuring a matte black zinc coating for corrosion protection. ECS has done it again, this time with the most advanced brake rotor yet - the 5th generation of high-performance brake rotors specifically designed for German cars. With each new generation iterative improvements have been made to enhance the overall braking performance, durability, and reliability of these rotors. The V5 slotted rotor design provides excellent heat dissipation thanks to reduced pad out-gassing, meaning reduced brake fade. Slotting also reduces glazing, meaning consistently increased overall stopping power. The 5th generation slotted brake rotors also features a sleek black zinc coating for a clean, contemporary look as well as superior corrosion protection versus an uncoated or black oxide coated rotor. Crafted from high-quality materials, ECS brake rotors are engineered to withstand the rigors of high-performance driving. The precise machining and finishing ensure optimal rotor balance and minimize vibration, resulting in a smooth and consistent braking experience. Whether you're a weekend warrior or a daily driver, ECS 5th generation brake rotors are sure to provide you with the stopping power, durability, and reliability you need to confidently tackle any driving situation. Upgrade your braking performance today!
    Show More Show Less
    Balanced Front Big Brake Kit - Red - 355x32mm Rotor
    2X Entries Into Our F80 M3 Sweepstakes
    EBC - Corporate Logo
    T#:25308249
    Part#: BBK047RED-1
    Ships in 1 Business Day
    $ 3,167.99 USD
    Free Shipping on orders $49 and up

    The ultimate upgrade when it comes to improving stopping power!

    Complete with stunning, British-engineered six-piston calipers and all the hardware you need to completely replace all equivalent components of the front axle of your vehicle’s stock braking system, these complete kits give a firmer and more responsive brake pedal feel and allow you to drive much longer without the onset of brake fade.

    EBC Racing Brake Kits come with fully‐floating 2‐piece rotors as standard. These rotors allow the cast iron rotor ring to float independently of the hub, preventing disc cracking and leading to reliable performance even when subjected to the most demanding driving conditions.

    This kit comes with everything you need in the box and a detailed vehicle-specific installation pack, including race-spec brake fluid for the final system bleed.

    Key Features:

    Apollo-Series 6-Piston Calipers

    Two-piece bolted design that incorporates high-tensile 12.9-grade steel bolts for reinforcement of the caliper bridge section (computer FEA analysis shows that this offers significant improvements in caliper stiffness compared to a monobloc design) Machined from heat-treated low-pressure castings (this offers a noticeable performance advantage over conventional gravity cast calipers, exhibiting higher overall strength and a comparable caliper body stiffness to forging) High-temperature fluid seals coupled with full boot-type dust seals give maximum protection against road grime and debris Lightweight, hard-anodized aluminium staggered pistons with serrated/castellated piston noses that reduce heat transfer into the braking hydraulics Every single brake caliper pressure tested to 2,500psi Uses standard pad shapes, giving choice when selecting brake pads Fully-Floating Two-Piece Discs

    Fully-floating 355x32mm two-piece discs that allow the outer ring to expand freely in response to heat (this reduces stress which in turn extends disc life and reduces the tendency for disc cracking during extreme use) Drive bobbins machined from a single piece of stainless steel giving maximum strength and corrosion resistance (this reduces maintenance requirements and ensures the outer ring continues to float freely over time) Disc rings feature 48 directional internal curved vanes for improved cooling Unique ‘Swept Groove’ slot design for effective evacuation of braking dust and gases whilst ensuring good initial bite on brake application Now featuring the latest thermic black corrosion-resistant finish – the very latest in rust prevention Bluestuff™ NDX Performance Brake Pads

    Now road legal in most markets, Bluestuff™ NDX combines excellent cold bite with the capability to perform well in short spells of track/race conditions Stainless Steel Braided Brake Lines

    Every hose has a stainless-steel braided exterior that prevents a phenomenon known as ‘ballooning’, this braided exterior prevents the spongey feel of OE rubber lines and provides greater precision and feel under braking Super DOT 4 Brake Fluid

    Every kit is supplied with 1 litre of BF307+ super DOT 4 brake fluid. This fluid has a 310°C boiling point – a significantly higher boiling point than standard DOT 5.1 fluid Having such a high boiling point gives the braking system exceptional endurance, allowing you to push hard for extended periods without heat soak causing the fluid to boil and resulting in fade

    Show More Show Less
    Hawk - Corporate Logo
    T#:2507
    Part#: TMS2507
    Ships on Sep 17, 2026
    $ 234.99 USD
    Free Shipping
    $ 234.99 USD
    Free Shipping
    Hawk Blue 9012 race pads have a Medium/High torque and temperature compound with excellent brake modulation. #1 selling brake pad material for SCCA.


    Hawk - Corporate Logo
    T#:1649
    Part#: TMS1649
    Ships on Sep 17, 2026
    $ 261.99 USD
    Free Shipping
    $ 261.99 USD
    Free Shipping
    Hawk Blue 9012 race pads have a Medium/High torque and temperature compound with excellent brake modulation. #1 selling brake pad material for SCCA.
    Hawk - Corporate Logo
    T#:25014
    Part#: TMS25014
    Ships on Sep 17, 2026
    $ 347.99 USD
    Free Shipping
    $ 347.99 USD
    Free Shipping
    The Hawk DTC (Dynamic Torque Control) compound offers the highest friction coefficient of any Hawk pad. The DTC pads offer extremely high torque with aggressive controllable initial bite, superior release and torque control characteristics. These DTC-60 pads have less torque than the similar DTC-70 pads for better balance, especially when used as a rear pad combined with front DTC-70.
    Featuring:
  • High Intial Bite
  • Consistent torque over all pressures
  • Operating Range:400-1600°F; 204-871°C
  • High Temp & High Torque
  • Provides Superior Pad and Disc Wear
  • Excellent Torque Control
  • Excellent Modulation and Release Characteristics
  • Designed for High Deceleration Rates.

    These Front Hawk DTC-60 Racing Brake Pads fit the following BMWs:
    2001-2005 E46 BMW 330i 330Ci 330xi
    2003-2006 E46 BMW M3
    2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
    2006-2008 Z4 BMW Z4 3.0si
    2003-2009 Z4 BMW M Roadster & M Coupe (S54)
  • Show More Show Less
    Hawk - Corporate Logo
    T#:182547
    Part#: TMS182547
    Ships on Sep 17, 2026
    $ 369.99 USD
    Free Shipping
    $ 369.99 USD
    Free Shipping
    The Hawk DTC (Dynamic Torque Control) compound offers the highest friction coefficient of any Hawk pad. The DTC pads offer extremely high torque with aggressive controllable initial bite, superior release and torque control characteristics.
    Show More Show Less

    ATE - Corporate Logo
    T#:12757
    Part#: 34216790071
    Ships in 1 Business Day
    $ 86.99 USD
    Free Shipping
    $ 86.99 USD
    Free Shipping
    These are the OEM rear brake pads used on all 2001-2006 E46 330i, 330ci, 330xi, and 330i ZHP models. We have sourced these pads directly from the Original Equipment Manufacturer rather than from BMW themselves. It's the same pad as you would buy from the dealer but without the BMW logo. BMW sourced their pads from Ate, Textar, Jurid, or Pagid and they are all produced to the original BMW spec.

    Fits: rear axle, both sides

    This item fits the following BMWs:
    2001-2006 E46 BMW 330i 330Ci 330Xi
    Show More Show Less

    Hawk - Corporate Logo
    T#:121
    Part#: TMS121
    Ships on Sep 17, 2026
    $ 188.99 USD
    Free Shipping
    $ 188.99 USD
    Free Shipping
    The HPS pads are perfect for drivers who don't want the standard replacement pad and want something that will hold up for aggressive street and light autocross/track driving.
    Hawk - Corporate Logo
    T#:567536
    Part#: HB141B.650
    Ships on Sep 17, 2026
    $ 201.99 USD
    Free Shipping
    $ 201.99 USD
    Free Shipping
    This pad set fits the following StopTech 4-piston calipers: ST40 / ST45

    BMW E36 Z3 Front Brake Pad Set RedStuff Performance
    2X Entries Into Our F80 M3 Sweepstakes
    EBC - Corporate Logo
    T#:361177
    Part#: DP31211C
    In Stock
    5% off MSRP $ 179.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 170.99 USD
    Free Shipping
    5% off MSRP
    $ 179.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 170.99 USD
    Free Shipping
    EBC Redstuff brake pads are designed for high performance models that are driven aggressively on the street. Featuring a low dusting compound, that offers stopping power even when your brake discs are cold. This material is a Kevlar fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC Redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer, it brakes better and is quieter.
    Show More Show Less
    Hawk - Corporate Logo
    T#:567538
    Part#: HB141W.650
    Ships on Sep 17, 2026
    $ 247.99 USD
    Free Shipping
    $ 247.99 USD
    Free Shipping
    This pad set fits the following StopTech 4-piston calipers: ST40 / ST45

    Hawk - Corporate Logo
    T#:25008
    Part#: TMS25008
    Ships on Sep 17, 2026
    $ 197.99 USD
    Free Shipping
    $ 197.99 USD
    Free Shipping
    Hawk Blue racing pads are among the most aggressive track pads on the market. The formula for the friction material ensures a high level of braking performance especially at elevated temperatures. Hawk Blue pads have been a favorite of club racers for over a decade. Few pads can match their torque output at race temps. These pads do not work well when cold and will be abrasive to your rotors.

    Features and Characteristics:
    + very high friction / torque performance
    + medium temp range
    + up to 1000*F
    + abrasive metallic content that requires heat
    + good, predictable modulation at high temps

    REAR Brake Pad Applications:
    2001-2006 E46 BMW 330i 330Ci 330Xi
    2001-2006 E46 BMW M3
    1999-2004 E39 BMW M5
    2007 E60 BMW 525i
    1995-2001 E38 BMW 740i, 740i Sport, 740iL
    2004-2010 E83 BMW X3 2.5i, X3 3.0i, X3 3.0si
    1999-2006 E53 BMW X5 3.0i, X5 4.4i
    2007-2008 E85 BMW Z4 M Roadster, Z4 M Coupe
    2000-2003 E52 BMW Z8 Roadster
    Show More Show Less

    Hawk - Corporate Logo
    T#:1745
    Part#: TMS1745
    Ships on Sep 17, 2026
    $ 243.99 USD
    Free Shipping
    $ 243.99 USD
    Free Shipping
    The Hawk HT10 compound combines the high torque levels of the aggressive Hawk Blue with a revised friction compound that makes it easier to modulate and wears nicer on rotors. The HT10 remains consistent over a wide range of temps and can even work when cold. It's been a popular pad for racers looking for the performance of a Hawk Blue but is not as harsh on rotors.

    Features and Characteristics:
    + very high torque performance
    + high temp range
    + up to 1300*F
    + mild abrasive metallic content does not require high heat to work
    + excellent modulation at high temps+ a 'friendly and easy' pad to use

    REAR Applications for Hawk HB227 pads:
    1987-1991 E30 BMW M3
    1987-1994 E32 BMW 735i, 735iL, 740i, 740iL, 750iL
    1989-1995 E34 BMW 525i, 530i, 535i, 540i, M5
    1992-1999 E36 BMW 318i, 318is, 318ic, 318ti, 323is, 323ic, 325i, 325is, 325ic, 328i, 328is, 328ic
    1995-1999 E36 BMW M3
    1997-2003 E39 BMW 525i, 528i, 530i, 540i
    1999-2006 E46 BMW 323i, 323Ci, 323iT, 325i, 325Ci, 325iT, 325Xi, 325XiT, 328i, 328Ci
    1996-2002 Z3 BMW Z3 1.9, 2.3, 2.8, 3.0, M Roadster M Coupe
    2003-2008 Z4 BMW Z4 2.5i (M54), 3.0i (M54), 3.0i (N52), 3.0Si (N52)
    Show More Show Less
    Hawk - Corporate Logo
    T#:327
    Part#: TMS327
    Ships on Sep 17, 2026
    $ 246.99 USD
    Free Shipping
    $ 246.99 USD
    Free Shipping
    Hawk Blue 9012 race pads have a Medium/High torque and temperature compound with excellent brake modulation. #1 selling brake pad material for SCCA.
    Front V5 Plain Brake Rotors - Set (286x22)
    10X Entries Into Our F80 M3 Sweepstakes
    ECS - Corporate Logo
    T#:17704986
    Part#: 34116864060-P
    Ships in 5 Business Days
    Sale - Save 3% $ 125.99

    This product was last offered at the strikethrough price on
    06-14-2026

    $ 122.20 USD
    Free Shipping
    Sale - Save 3%
    $ 125.99

    This product was last offered at the strikethrough price on
    06-14-2026

    $ 122.20 USD
    Free Shipping
    Precision manufactured and featuring a GeoSpec® corrosion-resistant coating ECS has done it again, this time with the most advanced brake rotor yet - the 5th generation of high-performance brake rotors specifically designed for German cars. With each new generation iterative improvements have been made to enhance the overall braking performance, durability, and reliability of these rotors. The V5 plain rotor design is perfect for daily drivers looking for a reliable and affordable brake rotor option and features a durable GeoSpec® silver-colored coating, which offers superior corrosion protection versus a painted or zinc coated rotor. This coating also eliminates the light oiling many manufactures utilize to avoid flash rust while rotors are stored or in transit: this means there's no cleaning or scuffing required to install ECS V5 plain rotors, making brake services quicker than that with uncoated rotors. Crafted from high-quality materials, ECS V5 brake rotors are engineered to withstand the rigors of high-performance driving. The precise machining and finishing ensure optimal rotor balance and minimize vibration, resulting in a smooth and consistent braking experience. Whether you're a weekend warrior or a daily driver, ECS 5th generation brake rotors are sure to provide you with the stopping power, durability, and reliability you need to confidently tackle any driving situation. Upgrade your braking performance today!
    Show More Show Less


    Hawk - Corporate Logo
    T#:567537
    Part#: HB141Z.650
    Ships on Sep 17, 2026
    $ 204.99 USD
    Free Shipping
    $ 204.99 USD
    Free Shipping
    This pad set fits the following StopTech 4-piston calipers: ST40 / ST45
    Hawk - Corporate Logo
    T#:16478
    Part#: TMS16478
    Ships on Sep 17, 2026
    $ 389.99 USD
    Free Shipping
    $ 389.99 USD
    Free Shipping
    Hawk DTC-70 race pads have a heavy torque and high temperature compound with aggressive but controllable initial bite and brake modulation. These pads are intended for track-use only due to the very high-temperature ranges that they work in.
    Show More Show Less
    Hawk - Corporate Logo
    T#:1890
    Part#: TMS1890
    Ships on Sep 17, 2026
    $ 256.99 USD
    Free Shipping
    $ 256.99 USD
    Free Shipping
    The Hawk HT10 compound combines the high torque levels of the aggressive Hawk Blue with a revised friction compound that makes it easier to modulate and wears nicer on rotors. The HT10 remains consistent over a wide range of temps and can even work when cold. It's been a popular pad for racers looking for the performance of a Hawk Blue but is not as harsh on rotors.

    Features and Characteristics:
    + very high torque performance
    + high temp range
    + up to 1300*F
    + mild abrasive metallic content does not require high heat to work
    + excellent modulation at high temps+ a 'friendly and easy' pad to use

    Hawk HT10 FRONT Brake Pads for many BMW applications (E36/E46/Z3/Z4)

    These Front Hawk HT10 Brake Pads fit the following BMWs:
    1992-1999 E36 BMW (no M) including 318i, 318is, 325i, 325is, 328i, 328is & 323is
    1999-2005 E46 BMW (no 330/M) including 323i, 323Ci, 325i, 325xi, 325Ci, 328i, 328Ci
    1996-2002 Z3 BMW (no M) including Z3 1.9, 2.3, 2.5, 2.8 & 3.0 liter
    2003-2008 Z4 BMW (no M or si) including Z4 2.5 & Z4 3.0 (no si!)
    Show More Show Less

    Hawk - Corporate Logo
    T#:25006
    Part#: TMS25006
    Ships on Sep 17, 2026
    $ 260.99 USD
    Free Shipping
    $ 260.99 USD
    Free Shipping
    The Hawk DTC (Dynamic Torque Control) compound offers the highest friction coefficient of any Hawk pad. The DTC pads offer extremely high torque with aggressive controllable initial bite, superior release and torque control characteristics. These DTC-60 pads have less torque than the similar DTC-70 pads for better balance, especially when used as a rear pad combined with front DTC-70.
    Featuring:
  • High Intial Bite
  • Consistent torque over all pressures
  • Operating Range:400-1600°F; 204-871°C
  • High Temp & High Torque
  • Provides Superior Pad and Disc Wear
  • Excellent Torque Control
  • Excellent Modulation and Release Characteristics
  • Designed for High Deceleration Rates.

    REAR Brake Pad Applications:
    2001-2006 E46 BMW 330i 330Ci 330Xi
    2001-2006 E46 BMW M3
    1999-2004 E39 BMW M5
    2007 E60 BMW 525i
    1995-2001 E38 BMW 740i, 740i Sport, 740iL
    2004-2010 E83 BMW X3 2.5i, X3 3.0i, X3 3.0si
    1999-2006 E53 BMW X5 3.0i, X5 4.4i
    2007-2008 E85 BMW Z4 M Roadster, Z4 M Coupe
    2000-2003 E52 BMW Z8 Roadster
  • Show More Show Less

    Rear V5 Plain Brake Rotors - Set (276x19)
    10X Entries Into Our F80 M3 Sweepstakes
    ECS - Corporate Logo
    T#:17040299
    Part#: 34216864903-P
    Ships in 5 Business Days
    Sale - Save 10% $ 155.99

    This product was last offered at the strikethrough price on
    06-14-2026

    $ 140.38 USD
    Free Shipping
    Sale - Save 10%
    $ 155.99

    This product was last offered at the strikethrough price on
    06-14-2026

    $ 140.38 USD
    Free Shipping
    Precision manufactured and featuring a GeoSpec® corrosion-resistant coating ECS has done it again, this time with the most advanced brake rotor yet - the 5th generation of high-performance brake rotors specifically designed for German cars. With each new generation iterative improvements have been made to enhance the overall braking performance, durability, and reliability of these rotors. The V5 plain rotor design is perfect for daily drivers looking for a reliable and affordable brake rotor option and features a durable GeoSpec® silver-colored coating, which offers superior corrosion protection versus a painted or zinc coated rotor. This coating also eliminates the light oiling many manufactures utilize to avoid flash rust while rotors are stored or in transit: this means there's no cleaning or scuffing required to install ECS V5 plain rotors, making brake services quicker than that with uncoated rotors. Crafted from high-quality materials, ECS V5 brake rotors are engineered to withstand the rigors of high-performance driving. The precise machining and finishing ensure optimal rotor balance and minimize vibration, resulting in a smooth and consistent braking experience. Whether you're a weekend warrior or a daily driver, ECS 5th generation brake rotors are sure to provide you with the stopping power, durability, and reliability you need to confidently tackle any driving situation. Upgrade your braking performance today!
    Show More Show Less
    Power Stop - Corporate Logo
    T#:53361624
    Part#: K874
    Ships in 1 Business Day
    New Item
    $ 485.99 USD
    $ 485.99 USD
    If you are tired of unsightly brake dust and a spongy pedal feel, the PowerStop K874 Z23 Brake Kit offers a "1-Click" solution to refresh your entire braking system.

    Hawk - Corporate Logo
    T#:3989
    Part#: TMS3989
    Ships on Sep 17, 2026
    $ 228.99 USD
    Free Shipping
    $ 228.99 USD
    Free Shipping
    Hawk Blue racing pads are among the most aggressive track pads on the market. The formula for the friction material ensures a high level of braking performance especially at elevated temperatures. Hawk Blue pads have been a favorite of club racers for over a decade. Few pads can match their torque output at race temps. These pads do not work well when cold and will be abrasive to your rotors.

    Features and Characteristics:
    + very high friction / torque performance
    + medium temp range
    + up to 1000*F
    + abrasive metallic content that requires heat
    + good, predictable modulation at high temps

    This item fits the following BMWs:
    1992-1999 E36 BMW (no M) including 318i, 318is, 325i, 325is, 328i, 328is & 323is
    1999-2005 E46 BMW (no 330/M) including 323i, 323Ci, 325i, 325xi, 325Ci, 328i, 328Ci
    1996-2002 Z3 BMW (no M) including Z3 1.9, 2.3, 2.5, 2.8 & 3.0 liter
    2003-2008 Z4 BMW (no M or si) including Z4 2.5 & Z4 3.0 (no si!)
    Show More Show Less
    Hawk - Corporate Logo
    T#:16527
    Part#: TMS16527
    Ships on Sep 17, 2026
    $ 140.99 USD
    Free Shipping
    $ 140.99 USD
    Free Shipping
    The Ceramic pads are perfect for drivers who don't want the standard replacement pad but want a longer life from them.

    AAF Brake Backing Plates - E46 Non-M
    For vehicles with OEM 330i sized brakes
    Advanced Auto Fabrication - Corporate Logo
    T#:7608848
    Part#: 11675
    Ships in 3 Business Days
    $ 175.00 USD
    Free Shipping on orders $49 and up
    Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. These Backing Plates by Advanced Auto Fabrication feature a large “Pocket” to allow for more efficient air flow into the brake hat. This allows air to travel through the vents in the rotor. AAF's Backing Plate is the full size of the rotor and is a heat shield for the shocks and ball joints. Heating of your shock oil causes oil thinning, which changes the shock dampening characteristics. Protecting your ball joints from heat will improve longevity and prevent premature wear. The backing plates are powder coated black for extra durability and attractive aesthetics. They replace the OEM dust shields, and will need to be removed before installation.
    Show More Show Less

    ATD Tools - Corporate Logo
    T#:641941
    Part#: ATD5478
    Ships in 6 Business Days
    $ 294.99 USD
    Free Shipping
    $ 294.99 USD
    Free Shipping
    This great set does all the popular flares
    Front ABS Sensor - Left
    For vehicles with DSC and production date from 09/2000. Also for vehicles with ASC and ...
    2X Entries Into Our F80 M3 Sweepstakes
    URO - Corporate Logo
    T#:639533
    Part#: 34526792897
    In Stock
    $ 25.99 USD
    Free Shipping on orders $49 and up
    $ 25.99 USD
    Free Shipping on orders $49 and up
    URO Parts is one of the leading manufacturers of high quality direct replacement aftermarket components, covering a wide range of makes and models. All of their replacement parts are manufactured to ISO 9000 certification standards, so you can expect long lasting performance from URO Parts. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform! Pulse Generator, Abs Front Left This item fits the following BMW Chassis: E46 M3,E85 Z4M,E46,E85 Z4,E86 Z4
    Show More Show Less
    Hawk - Corporate Logo
    T#:4751
    Part#: TMS4751
    Ships on Sep 17, 2026
    $ 278.99 USD
    Free Shipping
    $ 278.99 USD
    Free Shipping
    The Hawk DTC (Dynamic Torque Control) compound offers the highest friction coefficient of any Hawk pad. The DTC pads offer extremely high torque with aggressive controllable initial bite, superior release and torque control characteristics.
    Featuring:
  • High Intial Bite
  • Consistent torque over all pressures
  • Operating Range:400-1600°F; 204-871°C
  • High Temp & High Torque
  • Provides Superior Pad and Disc Wear
  • Excellent Torque Control
  • Excellent Modulation and Release Characteristics
  • Designed for High Deceleration Rates.

    REAR Applications for Hawk DTC-70 pads:
    1987-1991 E30 BMW M3
    1987-1994 E32 BMW 735i, 735iL, 740i, 740iL, 750iL
    1989-1995 E34 BMW 525i, 530i, 535i, 540i, M5
    1992-1999 E36 BMW 318i, 318is, 318ic, 318ti, 323is, 323ic, 325i, 325is, 325ic, 328i, 328is, 328ic
    1995-1999 E36 BMW M3
    1997-2003 E39 BMW 525i, 528i, 530i, 540i
    1999-2006 E46 BMW 323i, 323Ci, 323iT, 325i, 325Ci, 325iT, 325Xi, 325XiT, 328i, 328Ci
    1996-2002 Z3 BMW Z3 1.9, 2.3, 2.8, 3.0, M Roadster M Coupe
    2003-2008 Z4 BMW Z4 2.5i (M54), 3.0i (M54), 3.0i (N52), 3.0Si (N52)
  • Show More Show Less


    Front Cross-Drilled & Floating Brake Rotors -E46 M3 US/Euro
    We Price Match - Give Us A Call or Chat!
    Zimmermann - Corporate Logo
    T#:2806
    Part#: 34112282801-ZIMM
    In Stock at Vendor
    $ 635.68

    This product was last offered at the strikethrough price on
    06-17-2026

    $ 634.88 USD
    Free Shipping
    $ 634.88 USD
    Free Shipping
    OEM supplier Zimmerman has filled the gap left by BMW when they decided to stop importing the Euro E46 M3 brake rotors to the US. The Euro rotors are cross-drilled and floating, providing much improved cooling over the stock US brakes and are a direct replacement for the stock US rotors. These Zimmerman floating rotors are made in Germany and are almost identical to the Genuine BMW floating rotors that are no longer available to the US. They share similar drill patterns, floating design, offset, and vaning as the OE BMW parts. Zimmerman has been an OE supplier to a large number of German cars, including Porsche and Mercedes.
    These Zimmerman rotors are sold as a pair.

    Applications:
    2001-2006 BMW E46 M3
    Show More Show Less
    Hawk - Corporate Logo
    T#:25010
    Part#: TMS25010
    In Stock at Vendor
    $ 155.99 USD
    Free Shipping
    $ 155.99 USD
    Free Shipping
    A high-performance street pad with much-improved braking performance and significantly reduced brake dust. The HPS pads are perfect for drivers who don�t want an ordinary replacement pad and want something that will hold up for aggressive street. With the HPS pads you can expect:
    • Increased stopping power even when the pads are cold
    • Longer pad life
    • Low dust compared with other performance pads
    • Quiet operation
    In addition, the HPS pads are easy on rotors. And Hawk stands behind their pads with a limited lifetime warranty against defects.

    This pad set includes pads for both REAR brakes.

    REAR Brake Pad Applications:
    2001-2006 E46 BMW 330i 330Ci 330Xi
    2001-2006 E46 BMW M3
    1999-2004 E39 BMW M5
    2007 E60 BMW 525i
    1995-2001 E38 BMW 740i, 740i Sport, 740iL
    2004-2010 E83 BMW X3 2.5i, X3 3.0i, X3 3.0si
    1999-2006 E53 BMW X5 3.0i, X5 4.4i
    2007-2008 E85 BMW Z4 M Roadster, Z4 M Coupe
    2000-2003 E52 BMW Z8 Roadster
    Show More Show Less
    Stability Control Pressure Sensor
    2X Entries Into Our F80 M3 Sweepstakes
    URO - Corporate Logo
    T#:10291046
    Part#: 34511165467
    Ships in 1 Business Day
    $ 187.99 USD
    Free Shipping on orders $49 and up

    Advanced Auto Fabrication - Corporate Logo
    T#:7608846
    Part#: 11674
    Ships in 3 Business Days
    $ 450.00 USD
    Free Shipping
    $ 450.00 USD
    Free Shipping
    Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. AAF is proud to introduce their redesigned AAF E46 (non-M) Brake Cooling Duct Kit! Features: Extremely Light Weight – Less than 4 lbs in total! Ultra-High Airflow Inlets Tight Turning Radius Easy and Quick To Install Inexpensive to Buy and Maintain Durable for Racing Conditions Designed strong and lightweight these brake duct inlets include a massive 4' inlet. Ultimately this aids in providing higher airspeed and pressure to the brake rotor and thus better brake cooling. Inlets are manufactured by AAF in-house with a 3D printer to provide a strong and inexpensive part. Brake duct tubes included in this kit are made from lightweight and strong ABS plastic. Shaped for optimized airflow, these tubes also provide the ability for a tight turning radius even with large racing tires. Per AAF: for a SPEC E46 with the spec 255 Toyo tire, you can turn 1.5 turns from straight without hitting the tubes, which is more than enough for driving around the paddock. The tubes taper down to a 3' flex hose, to remain legal for SE46. Included in the kit are AAF's Brake Backing Plates as well. Kit Contents: Left and Right AAF 3D Printed Massive 4' Inlets Left and Right 4' to 3' Molded Tubes Two 13' Sections of Flex Hose Left and Right AAF Backing Plates All Attaching Hardware and Hose Clamps
    Show More Show Less

    Hawk - Corporate Logo
    T#:25015
    Part#: TMS25015
    In Stock at Vendor
    $ 169.99 USD
    Free Shipping
    $ 169.99 USD
    Free Shipping
    A high-performance street pad with much-improved braking performance and significantly reduced brake dust. The HPS pads are perfect for drivers who don�t want an ordinary replacement pad and want something that will hold up for aggressive street. With the HPS pads you can expect:
    • Increased stopping power even when the pads are cold
    • Longer pad life
    • Low dust compared with other performance pads
    • Quiet operation
    In addition, the HPS pads are easy on rotors. And Hawk stands behind their pads with a limited lifetime warranty against defects.

    This pad set includes pads for both FRONT brakes.

    These Front Hawk Blue Racing Brake Pads fit the following BMWs:
    2001-2005 E46 BMW 330i 330Ci 330xi
    2003-2006 E46 BMW M3
    2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
    2006-2008 Z4 BMW Z4 3.0si
    2003-2009 Z4 BMW M Roadster & M Coupe (S54)
    Show More Show Less
    Hawk - Corporate Logo
    T#:1158
    Part#: TMS1158
    Ships on Sep 17, 2026
    $ 145.99 USD
    Free Shipping
    $ 145.99 USD
    Free Shipping
    A high-performance street pad with much-improved braking performance and significantly reduced brake dust. The HPS pads are perfect for drivers who don’t want an ordinary replacement pad and want something that will hold up for aggressive street. With the HPS pads you can expect:
    • Increased stopping power even when the pads are cold
    • Longer pad life
    • Low dust compared with other performance pads
    • Quiet operation
    In addition, the HPS pads are easy on rotors. And Hawk stands behind their pads with a limited lifetime warranty against defects.

    This pad set includes pads for both REAR brakes.

    REAR Applications for Hawk HB227 pads:
    1987-1991 E30 BMW M3
    1987-1994 E32 BMW 735i, 735iL, 740i, 740iL, 750iL
    1989-1995 E34 BMW 525i, 530i, 535i, 540i, M5
    1992-1999 E36 BMW 318i, 318is, 318ic, 318ti, 323is, 323ic, 325i, 325is, 325ic, 328i, 328is, 328ic
    1995-1999 E36 BMW M3
    1997-2003 E39 BMW 525i, 528i, 530i, 540i
    1999-2006 E46 BMW 323i, 323Ci, 323iT, 325i, 325Ci, 325iT, 325Xi, 325XiT, 328i, 328Ci
    1996-2002 Z3 BMW Z3 1.9, 2.3, 2.8, 3.0, M Roadster M Coupe
    2003-2008 Z4 BMW Z4 2.5i (M54), 3.0i (M54), 3.0i (N52), 3.0Si (N52)
    Show More Show Less

    Rear V5 Slotted Brake Rotors - Set (294x19)
    For convertible models only For touring models only
    10X Entries Into Our F80 M3 Sweepstakes
    ECS - Corporate Logo
    T#:17073594
    Part#: 34216864056-S
    Ships in 5 Business Days
    Sale - Save 3% $ 313.99

    This product was last offered at the strikethrough price on
    06-14-2026

    $ 304.56 USD
    Free Shipping
    Sale - Save 3%
    $ 313.99

    This product was last offered at the strikethrough price on
    06-14-2026

    $ 304.56 USD
    Free Shipping
    Precision manufactured for consistent stopping power during high performance driving. Featuring a matte black zinc coating for corrosion protection. ECS has done it again, this time with the most advanced brake rotor yet - the 5th generation of high-performance brake rotors specifically designed for German cars. With each new generation iterative improvements have been made to enhance the overall braking performance, durability, and reliability of these rotors. The V5 slotted rotor design provides excellent heat dissipation thanks to reduced pad out-gassing, meaning reduced brake fade. Slotting also reduces glazing, meaning consistently increased overall stopping power. The 5th generation slotted brake rotors also features a sleek black zinc coating for a clean, contemporary look as well as superior corrosion protection versus an uncoated or black oxide coated rotor. Crafted from high-quality materials, ECS brake rotors are engineered to withstand the rigors of high-performance driving. The precise machining and finishing ensure optimal rotor balance and minimize vibration, resulting in a smooth and consistent braking experience. Whether you're a weekend warrior or a daily driver, ECS 5th generation brake rotors are sure to provide you with the stopping power, durability, and reliability you need to confidently tackle any driving situation. Upgrade your braking performance today!
    Show More Show Less
    Hawk - Corporate Logo
    T#:25012
    Part#: TMS25012
    Ships on Sep 17, 2026
    $ 278.99 USD
    Free Shipping
    $ 278.99 USD
    Free Shipping
    Hawk Blue racing pads are among the most aggressive track pads on the market. The formula for the friction material ensures a high level of braking performance especially at elevated temperatures. Hawk Blue pads have been a favorite of club racers for over a decade. Few pads can match their torque output at race temps. These pads do not work well when cold and will be abrasive to your rotors.

    Features and Characteristics:
    + very high friction / torque performance
    + medium temp range
    + up to 1000*F
    + abrasive metallic content that requires heat
    + good, predictable modulation at high temps

    These Front Hawk Blue Racing Brake Pads fit the following BMWs:
    2001-2005 E46 BMW 330i 330Ci 330xi
    2003-2006 E46 BMW M3
    2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
    2006-2008 Z4 BMW Z4 3.0si
    2003-2009 Z4 BMW M Roadster & M Coupe (S54)
    Show More Show Less

    Hawk - Corporate Logo
    T#:193636
    Part#: TMS193636
    Ships in 6 Business Days
    $ 281.99 USD
    Free Shipping
    $ 281.99 USD
    Free Shipping
    The Hawk DTC (Dynamic Torque Control) compound offers the highest friction coefficient of any Hawk pad. The DTC pads offer extremely high torque with aggressive controllable initial bite, superior release and torque control characteristics. These DTC-60 pads have less torque than the similar DTC-70 pads for better balance, especially when used as a rear pad combined with front DTC-70.
    Featuring:
  • High Intial Bite
  • Consistent torque over all pressures
  • Operating Range:400-1600°F; 204-871°C
  • High Temp & High Torque
  • Provides Superior Pad and Disc Wear
  • Excellent Torque Control
  • Excellent Modulation and Release Characteristics
  • Designed for High Deceleration Rates.

    These Front Hawk DTC-60 Racing Brake Pads fit the following BMWs:
    1992-1999 E36 BMW (no M) including 318i, 318is, 325i, 325is, 328i, 328is & 323is
    1999-2005 E46 BMW (no 330/M) including 323i, 323Ci, 325i, 325xi, 325Ci, 328i, 328Ci
    1996-2002 Z3 BMW (no M) including Z3 1.9, 2.3, 2.5, 2.8 & 3.0 liter
    2003-2008 Z4 BMW (no M or si) including Z4 2.5 & Z4 3.0 (no si!)
  • Show More Show Less

    Front V5 Drilled & Slotted Brake Rotors - Set (300x22)
    For touring models only For convertible models only
    10X Entries Into Our F80 M3 Sweepstakes
    ECS - Corporate Logo
    T#:17704989
    Part#: 34116864058-XS
    Ships in 5 Business Days
    Sale - Save 5% $ 287.99

    This product was last offered at the strikethrough price on
    06-14-2026

    $ 273.58 USD
    Free Shipping
    Sale - Save 5%
    $ 287.99

    This product was last offered at the strikethrough price on
    06-14-2026

    $ 273.58 USD
    Free Shipping
    Precision manufactured for consistent stopping power during high performance driving. Featuring a matte black zinc coating for corrosion protection. ECS has done it again, this time with the most advanced brake rotor yet - the 5th generation of high-performance brake rotors specifically designed for German cars. With each new generation iterative improvements have been made to enhance the overall braking performance, durability, and reliability of these rotors. The V5 cross drilled and slotted rotor design offers even greater heat dissipation and improved wet-weather performance as compared with a slotted rotor, making it an ideal choice for high-performance driving enthusiasts. The 5th generation slotted brake rotor also features a sleek black zinc coating for a clean, contemporary look as well as superior corrosion protection versus an uncoated or black oxide coated rotor. Crafted from high-quality materials, ECS brake rotors are engineered to withstand the rigors of high-performance driving. The precise machining and finishing ensure optimal rotor balance and minimize vibration, resulting in a smooth and consistent braking experience. Whether you're a weekend warrior or a daily driver, ECS 5th generation brake rotors are sure to provide you with the stopping power, durability, and reliability you need to confidently tackle any driving situation. Upgrade your braking performance today!
    Show More Show Less
    Front V5 Slotted Brake Rotors - Set (325x25)
    10X Entries Into Our F80 M3 Sweepstakes
    ECS - Corporate Logo
    T#:17738188
    Part#: 34116864047-S
    Ships in 5 Business Days
    Sale - Save 3% $ 393.99

    This product was last offered at the strikethrough price on
    06-14-2026

    $ 382.16 USD
    Free Shipping
    Sale - Save 3%
    $ 393.99

    This product was last offered at the strikethrough price on
    06-14-2026

    $ 382.16 USD
    Free Shipping
    Precision manufactured for consistent stopping power during high performance driving. Featuring a matte black zinc coating for corrosion protection. ECS has done it again, this time with the most advanced brake rotor yet - the 5th generation of high-performance brake rotors specifically designed for German cars. With each new generation iterative improvements have been made to enhance the overall braking performance, durability, and reliability of these rotors. The V5 slotted rotor design provides excellent heat dissipation thanks to reduced pad out-gassing, meaning reduced brake fade. Slotting also reduces glazing, meaning consistently increased overall stopping power. The 5th generation slotted brake rotors also features a sleek black zinc coating for a clean, contemporary look as well as superior corrosion protection versus an uncoated or black oxide coated rotor. Crafted from high-quality materials, ECS brake rotors are engineered to withstand the rigors of high-performance driving. The precise machining and finishing ensure optimal rotor balance and minimize vibration, resulting in a smooth and consistent braking experience. Whether you're a weekend warrior or a daily driver, ECS 5th generation brake rotors are sure to provide you with the stopping power, durability, and reliability you need to confidently tackle any driving situation. Upgrade your braking performance today!
    Show More Show Less
    Brembo GT-S Drilled 6-Piston Cast Monobloc Calipers | 355x32mm (14'')...
    2X Entries Into Our F80 M3 Sweepstakes
    5X Entries For Our G87 M2 Sweepstakes!
    Brembo - Corporate Logo
    T#:6476051
    Part#: 1M1.8008AS
    Ships in 3 Business Days
    $ 4,595.00 USD
    $ 4,595.00 USD