Enhance Safety and Stability with the DSC/ABS Control Module for BMW E46 and Z4

The DSC/ABS Control Module is a vital component for ensuring safety and stability in your BMW E46 and Z4. This top-tier replacement unit guarantees precise control of the Dynamic Stability Control (DSC) and Anti-Lock Braking System (ABS), providing you with confidence on the road. Crafted to seamlessly fit BMW E46 and Z4 models, it ensures optimal performance and peace of mind.

Pagid's newest sprint racing pad was developed for racing cars achieving very high average speeds with short braking distances and functional aero. The RST pads feature very high friction levels for the quickest bite and highest fade resistance than any other Pagid pad. RST pads are broken into 5 levels and all have ranging bite and release characteristics. RST pads will trade low wear for torque output and faster response. These were developed based on the needs of race engineers in World Challenge, Daytona Prototype, and GTLM where functional aero meant high grip in the corners and smaller braking zones.

RST Brake Pad Types:

• RST1 -  Very high friction coefficient, high initial bite, progressive torque curve, very high fade resistant
• RST2 - Medium high friction coefficient, good initial bite, mild progressive torque curve, good pedal feel
• RST3 - High friction coefficient, good initial bite, low heat conductivity, excellent modulation and release characteristics
• RST4 - Medium friction coefficient, good initial bite, mild progressive torque curve, high heat tolerance with consistent feel
• RST5 - Optimum thermal management, absolutely fluid fade resistant, highly developed recovery properties, extremely high friction coefficient

This item fits the following BMWs:
1995-1998 E36 BMW M3 
2001-2006 E46 BMW 330i M3 
1989-1995 E34 BMW 525i 530i 535i 540i M5 
1988-1994 E32 BMW 735i 735il 740i 740il 750il 
1997-2002 Z3 BMW M Roadster M Coupe
2006-2008 Z4 BMW M Roadster M Coupe

1 Gallon Power Extractor makes fluid changing and bleeding tasks straightforward and efficient. Ideal for extracting differential, brake, engine, or transmission fluids, this versatile tool utilizes an integrated hand pump to create a vacuum in the tank, drawing fluid into the unit via the attached tubing. The Power Extractor features a 1-gallon capacity high-density polyurethane tank that is resistant to all chemicals, ensuring durability and reliability.

• Versatile Use: Suitable for extracting a variety of fluids including differential, brake, engine, and transmission fluids.
• Efficient Operation: Integrated hand pump creates a vacuum for easy fluid extraction.
• Durable Construction: High-density polyurethane tank resists chemical damage and is built to last.
• Portable and Convenient: Lightweight and corrosion-proof design makes it easy to use at home or on the go.
• Includes Dipstick Tube: Comes with a dipstick tube for hassle-free oil changes.

The 1 Gallon Power Extractor is an essential tool for both professional mechanics and DIY enthusiasts looking for a reliable and efficient solution for fluid extraction.

BMW E46 Z4 Front Brake Rotors by Brembo provide superior stopping power and reliability, ideal for BMW E46 and Z4 models. These high-quality rotors from Brembo are crafted to meet OEM standards, ensuring dependable braking performance and longevity. Made by Brembo, a trusted leader in brake technology, these rotors are designed to restore the factory braking performance of your BMW E46 or Z4 while maintaining smooth operation and safety.

• Includes both front rotors for BMW E46 and Z4 models
• Manufactured by Brembo, known for over 40 years of expertise in braking systems
• Precision-engineered to OEM specifications for excellent fit and reliable performance
• Smooth operation with a durable design to resist wear and minimize noise
• Includes set screws for easy rotor installation
• Compatible with both OEM and performance brake pads, for versatility in brake setup

For optimal results, complete your brake replacement with performance brake pads. Visit our tool section for everything you need to make installation quick and effective. Check out our Brake Pad Bedding DIY to maximize the performance and lifespan of your new rotors and pads.

• Superior braking power for enhanced safety on the road
• Increased control and responsiveness during braking maneuvers
• Larger brake discs and calipers improve heat dissipation for consistent performance
• Designed specifically for the E46 M3 CSL model for perfect fitment

BRAKE CALIPER PISTON TOOL SET:

The Schwaben 18-piece disk brake retractor tool kit screws brake caliper pistons back into their bores to make room needed for new brake pads. An essential tool for working on calipers with threaded pistons, the kit comes with both right-hand and left-hand thread screw jacks, press plate, and 15 different diameter press disks to fit a wide variety of vehicles, both import and domestic, including Audi, BMW, Ford, GM, Honda, Mazda, Mitsubishi, Subaru, Toyota, Volkswagen and others.

Made of 100 percent chromalloy steel for strength, durability, and long service life.

PROTECTA SOCKET SET:

Protecta socket are used to keep ugly scratch marks from showing up after torqueing down wheel lugs.

Features:

• Coated six-point deep-well impact sockets 
• Color coded mar-free exterior coatings that prevent nicks and scratches left by plain metal sockets
• 17mm, 19mm and 21mm Sockets included

Use these with your breaker bar or impact gun to remove the tightest wheel bolts and lug nuts: when reinstalling wheels, use them to final torque wheel fasteners to factory specifications.

Combine these with our torque limiting sockets and the Schwaben ½-inch torque wrench for a complete wheel fastener solution.

CALIPER HOOK SET:

• Tired of messing with bent coat hangers or bungee cords to hang your calipers up and out of the way when performing brake maintenance? These hooks make working on your brakes easier by letting you hang your calipers with ease, no more fighting with the bungee cords or zip ties to hold the caliper just right or having to make your own "custom" hooks with wire.
• Holds brake calipers out of the way while working on brakes
• Also use to hang other automotive parts and tools while working on your vehicle.
• Stronger than zip ties or wire.
• Save the brake hose by not hanging caliper by hose.
• Made of  thick steel for strength and durability. length is 8"

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

BMW E46 Rear Brake Rotors - Pair (320x22) are a perfect upgrade for your BMW, offering a cost-effective way to improve braking performance. These rotors from Turner Motorsport are designed to replace your factory rear rotors with premium Meyle Platinum rotors, featuring a GeoMet protective coating. This innovative coating protects against road salt, brake fluid, and other corrosive elements, while also repelling water and dirt to maintain a clean appearance behind your wheels.

Benefits:

• Enhanced Protection: GeoMet coating provides superior resistance to corrosion and environmental factors.
• Improved Durability: Cured at 572°F for a consistent, long-lasting finish.
• Optimized Performance: Replace your rotors and pads together for maximum braking efficiency.
• Clean Aesthetics: The coating ensures no grease or oil residue, giving your brake system a clean, polished look.

Upgrade your BMW E46 with these high-quality rotors and enjoy restored stopping power and durability.