Enhance your BMW or MINI lifting experience with the Powerflex BMW & MINI jack pad adapter. Specifically crafted to snugly fit into the plastic lifting points of your vehicle, this adapter ensures lift stability while safeguarding the underside. Experience a secure and safe jack point, with added height to protect against rocker panel contact. A valuable addition for anyone using a floor jack to maintain their BMW or MINI.

• Ensures lift stability
• Protects the vehicle's underside
• Provides a secure and safe jack point
• Adds extra height to prevent rocker panel contact
• Compatible with various BMW and MINI models

This part replaces OEM Part Numbers: 51717039760, 51717123311, and 51718268885

Only with jack pad retrofit kit: Countryman / Paceman

This is a high quality reproduction of the Euro-only model E46 M3 CSL style front bumper cover spoiler. Unlike the stock E46 M3 style bumper, this CSL style has no fog light openings, and a single duct on the driver's side that can be made to function as a cold air intake inlet/duct. The bumper is made of polypropylene (PP) plastic, just like a factory BMW bumper covers. It also features pre-installed carbon fiber lips, very much in keeping with the factory CSL part. Best of all, this CSL-inspired bumper is available for only a fraction of what a real CSL bumper would sell for -- the BMW dealers themselves are forbidden from ordering genuine CSL parts anymore, making the "real thing" even harder to come by. This bumper comes as shown, primed ready to prep and paint. Includes US license plate mount (bumper is pre-drilled to accpet the license plate mount). The screen for the intake hole is not included but can be added from the options below. Professional paint and installation is highly recommended.

This M3 CSL style bumper can be used on the following BMWs:

2001-2006 E46 M3

Transform the rear bumper of your BMW E46 into a stylish statement with the M-Tech 2 Coupe Replica bumper conversion kit. Elevate your vehicle's appearance effortlessly with this kit.

The ECS tow hook is a perfect starting point for ECS tow mounted accessories or as a clean looking tow hook. In-house engineering designated this tow hook as the core that started it all when deciding the "must have" features when utilizing the factory tow hook location. The 4140 normalized steel gives their tow hook the strength needed to safely tow your car around and a black melonite coating to keep it aesthetically appealing.

Tow hook

• 1144 heat treated steel threaded adapter & bolt
• 4140 normalized tow hook
• All black melonite coating for extreme durability and corrosion resistance
• Includes the allen keys needed to make proper adjustments
• In-house designed & ECS engineered
• Made in America

Looking to achieve the M3 aesthetic without the high OEM cost? ECS presents the ideal solution. This M3 replica front bumper mirrors genuine specifications and is crafted from flexible ABS plastic, guaranteeing a seamless fit and finish that'll give your car the authentic factory M3 appearance.

Benefits:

• Authentic M3 replica front bumper at an affordable price
• Crafted from flexible ABS plastic for a precise fit
• Complete kit for hassle-free installation
• Manufactured by ECS Tuning, a renowned name in the aftermarket automotive industry

ECS Tuning, a global leader in aftermarket automotive parts, meticulously designs each product to ensure seamless integration with your vehicle. Engineered to the highest standards, this bumper is offered at an accessible price, enabling you to enhance your car's look without straining your budget.

Includes:

• M3 Bumper Cover
• Lower Grille
• Fog Lights and Trim

Note: Fog lights will require sourcing and splicing in of 9006 connectors

This Fire Wall Block Off Plate is the perfect solution for sealing off the engine bay from the cab in gutted track cars. It is pre-curved and has a bead roll to help retain its shape and keep out engine pollutants and other dangerous conditions. This plate mounts to factory locations and takes only minutes to install, needing no drilling, tapping, or welding. 

Fits both left and right side drive vehicles.

Use of silicone during installation can help create a tighter seal. Also, heat-reflective material can be used to help reduce heatsoak in the cabin.

Fits the following vehicles:

E46 BMW  All Sub-models

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

• Proprietary methods to lay wet carbon for a stronger and lighter product
• UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
• Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
• No black paint is used to hide imperfections along detail edges and creases.
• Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2001 - 2006 E46 M3

HARD Motorsport's window deflector pairs are a perfect option to increase the aerodynamic properties of your E46 BMW. Designed to reduced drag and resistance, these deflectors prevent air from flowing into your interior, allowing for faster acceleration times.

Features:

• Aluminum
• Lightweight
• Powder-coated
• Mounts in Factory Locations
• No Drilling/Hardware Needed

Compatible with HARD Motorsport polycarbonate rear windows.

Fits the following vehicles:

E46 BMW All coupe models

• Powerful 115-decibel output for enhanced safety
• Lightweight design for easy installation
• Weather-resistant covers for durability
• Stylish addition to your BMW's exterior

BMW E46 Front M-Tech 2 Sedan Replica Bumper Conversion: Upgrade Your BMW's Look

• Gives your BMW E46 sedan the sporty M-Tech 2 appearance
• Constructed from high-quality materials for durability
• Direct fit for easy installation
• Enhances aerodynamics and performance

Transform the look of your BMW E46 sedan with the BMW E46 Front M-Tech 2 Sedan Replica Bumper Conversion. This conversion kit gives your sedan the sporty appearance of the M-Tech 2 model, enhancing its aesthetic appeal. Crafted from high-quality materials, it ensures durability and longevity. With a direct fit design, installation is easy and hassle-free, allowing you to upgrade your BMW's look with minimal effort. Plus, the aerodynamic design of the bumper enhances performance on the road. Access Secret Premium Dashboard

Flush License Plate Bolt - 12mm

Upgrade your vehicle's aesthetics with the Flush License Plate Bolt - 12mm, designed to seamlessly blend into your license plate for a sleek appearance. Crafted from durable materials, this bolt offers both style and functionality. Its low-profile design ensures a clean look while providing secure attachment. Enhance your vehicle's exterior with this easy-to-install accessory.

• Sleek and seamless appearance
• Durable construction for long-lasting use
• Low-profile design for a clean look
• Easy installation process

Use this kit to repair your driver's side door lock for a fraction of the cost to replace it. Note: Kit comes with parts to fit both right and left hand drive cars. Discard the extra part that is not used on your application.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.