click to Chat Live
Contact YouTube Blog Twitter facebook Turner Motorsport on Instagram
1-800-280-6966
 |   Login
  • 0
 |   Login
Shopping Cart (0) Wishlist
Contact

(0) item(s) in your Shopping Cart
Home
Categories
Specials Gifts & Clothing
  1. Genuine BMW Accessories
  2. Genuine BMW Clothing
  3. Turner Shirts Hats and Gear
  4. Gifts under $25
  5. Gifts under $50
  6. Gifts under $100
  7. Gifts over $100
  8. Gift Certificates
  9. Stocking Stuffers
  10. Gift Packages
Brakes
  1. Brake Overhaul Packages
  2. Brake Pads
  3. Brake Pad Sensors
  4. Brake Rotors
  5. StopTech Big Brake Kits
  6. Brembo Big Brake Kits
  7. Stainless Steel Brake Lines
  8. Brake Fluid
  9. Brake Calipers
  10. Caliper Rebuild Kits
  11. Parking Brake Parts
  12. Brake Master Cylinders
  13. ABS/DSC System Parts
  14. Brake Cooling Ducts & Backing Plates
  15. Brake Pads - Brembo GT BBK Calipers
  16. Brake Pads - StopTech BBK Calipers
Car Care & Accessories
  1. Car Covers
  2. Wheel & Tire Cleaning
  3. Wax, Polish and Cleaning Supplies
  4. Detailing Gear
  5. Leather & Plastic Care
  6. Car Cleaning Supplies
  7. Chassis Paint, Coatings, Sealants, and Rust Conversion
Drivetrain
  1. Differential and Gearing Upgrades
  2. Differential Mounts and Upgrades
  3. OEM Clutch Kits & Clutch Parts
  4. Performance Clutch Kits & Parts
  5. Lightweight Aluminum Flywheel Upgrades
  6. Stock OEM Dual Mass Flywheels
  7. Stainless Steel Clutch Lines
  8. Clutch Parts
  9. UUC Short Shift Kits
  10. Axle Shafts
  11. Driveshafts
  12. B&M Short Shifters
  13. Performance Short Shift Kits
  14. UUC DSSR - Double Sheer Selector Rod
  15. Drivershaft Center Support Bearings
  16. Flex Discs & Guibos
  17. Transmission Mounts
  18. Transmission Parts
Engine Chips
  1. Shark Injector Performance Software, 1996-2005 Models
  2. Sprint Booster Drive-by-Wire Module
  3. Stand-Alone Engine Management
Engine Parts
  1. Engine Performance Packages
  2. Water Pumps
  3. Thermostats
  4. Radiators & Cooling System Overhaul Kits
  5. Oil Pan Baffles
  6. Radiator Hoses, Cooling Hoses, & Hose Sets
  7. Engine Fans & Fan Clutches
  8. Underdrive Power Pulleys
  9. Schrick Performance Camshafts
  10. External Engine Parts
  11. Drive Belts & V-Belts
  12. Gaskets, Gasket Sets, Seals, & O-Rings
  13. Crankcase Vent, PCV, and Oil Separator Systems
  14. Motor Mounts
  15. Electrical Sensors, Switches, & Relays
  16. Ignition Parts
  17. Alternator & Alternator Parts
  18. Starter Motors & Starter Parts
  19. Fuel System Parts
  20. Internal Engine Parts
  21. Cylinder Head Parts & Head Bolts
  22. VANOS Units & Parts
  23. Rod Bearing Kits
  24. Oil Coolers & Oil Cooler Parts
Exhaust
  1. Supersprint Performance Exhaust Systems
  2. Performance Headers & Downpipes
  3. Borla Performance Exhaust Systems
  4. Corsa Performance Exhaust Systems
  5. Dinan Free Flow Exhaust Systems
  6. Performance Exhaust Systems
  7. OEM Replacement Mufflers and Exhaust Systems
  8. Exhaust System Upgrades
  9. Exhaust Muffler Tips
  10. Catalytic Converters
  11. Oxygen Sensor - O2 Sensors
  12. Exhaust Gaskets Hangers and Parts
Exterior / Body
  1. Black Grills
  2. Chrome Grills & Trim
  3. Emblems & Decals for Hood, Trunk, and Wheels
  4. Painted Reflectors
  5. Front Spoilers, Bumper Covers, & Air Dams
  6. Rear Spoilers, Rear Wings, & Aprons
  7. Body Trim Parts & Accessories
  8. Hood & Trunk Shocks, Struts
  9. License Plate Brackets & License Plate Frames
  10. Mirror Kits & Mirror Parts
  11. Window Regulators & Motors
  12. Wiper Blades, Wiper Pumps, & Wiper Motor Parts
  13. Hood Pins and AeroCatch Latches
  14. Racing Tow Hooks and Tow Straps
  15. Aero & Body Kits
Intake
  1. aFe Cold-Air Intake Kits
  2. Turbos & Active Autowerke Superchargers
  3. Dinan Cold Air Intake Kits
  4. Gruppe M Cold-Air Intake Kits
  5. Performance Intake Kits
  6. aFe Performance Air Filters
  7. K&N Performance Air Filters
  8. Replacement Cone Air Filters (for Cold Air Intakes)
  9. Intake Cleaning & Recharging Kits
  10. Intake Manifold Components (DISA, Vacuum, CCV, Etc)
  11. Mass Air Sensor & Air Flow Meters
  12. Intake Boots & Hoses
  13. Throttle Body Parts
Interior
  1. Floor Mats
  2. Gauge Kits and Data Acquisition
  3. Auxiliary Input Adaptors for BMW
  4. Pedal Sets
  5. Escort Radar Detectors
  6. Factory Steering Wheels
  7. Racing Steering Wheels
  8. Shift Knobs, Shift Boots, & Shift Handles
  9. Seats & Seat Accessories
  10. Seat Belts and Racing Harnesses
  11. Cup Holders and Storage
  12. Carbon Fiber Interior Parts
  13. Door Sill Strips
  14. Heating & Air Conditioning
  15. Interior Switches and Switchgear
  16. Sunshades & Windscreens
  17. Interior Trim & Accessories
Lighting
  1. Euro Clear Turn Signals, Parking Lights, & Tail Lights
  2. Turn Signals / Parking Lights
  3. Angel Eye Headlight Conversions
  4. Bulbs for Headlights, Turn Signals and Tail Lights
  5. Headlights, Headlight Lenses, & Headlight Parts
  6. Fog Lights, Fog Light Lenses, & Fog Light Parts
  7. Tail Lights
  8. Stealth Bulbs
Maintenance
  1. Routine Maintenance & Tune-Up Packages
  2. Oil Filters & Oil Filter Kits
  3. Air Filters
  4. Fuel Filters
  5. Cabin Air Filters, Heppa Filters, & Microfilters
  6. Transmission Filter Kits & Transmission Service Parts
  7. Ignition Coils
  8. Spark Plugs
  9. Bentley Repair / Service Manuals
  10. Service Reset Tools & Fault Code Readers
  11. Anti-Freeze and Coolant
  12. Engine Oils - Genuine BMW and OEM
  13. Power Steering and Hydraulic Fluids
  14. Transmission and Gear Oil - Genuine BMW and OEM
  15. MOTUL Engine Oil and Gear Lubricants
  16. Red Line Oil & Fluids
  17. Liqui-Moly Oil and Additives
Suspension
  1. Shocks & Struts
  2. H&R Performance Springs
  3. Dinan Performance Springs
  4. H&R Cup Kit Shock & Spring Packages
  5. Spring & Shock Packages
  6. Bilstein PSS PSS9 PSS10 Coil Over Suspensions
  7. H&R Coil Over Suspensions
  8. KW Coil Over Suspensions
  9. ST Suspension Coilover Kits
  10. Turner Motorsport TrackSport Coil-Over Suspension Kits
  11. Turner Motorsport Racing Suspension Kits
  12. Chassis Reinforcement Kits & Parts
  13. Sway Bar Kits
  14. Sway Bar Links & Sway Bar Parts
  15. Camber / Caster Kits
  16. Strut Braces & Stress Bars
  17. Control Arm Replacements & Upgrades
  18. Suspension Bushings & Mounts
  19. Wheel Bearings & Hub Assemblies
  20. Steering Racks & Power Steering Pumps
  21. Tie Rods & Steering Parts
  22. Coil Over Spring Hardware
Wheels
  1. Apex Flow Formed Alloy Wheels
  2. Forgeline Custom Forged Alloy Wheels
  3. HRE FlowForm Performance Alloy Wheels
  4. Rohana Wheels
  5. D Force Flow Formed Alloy Wheels
  6. Original BMW Wheels and Wheel Upgrades
  7. Turner Motorsport Wheel Spacers
  8. ECS Tuning Wheel Spacers
  9. H&R Wheel Spacers
  10. Wheel Bolts, Wheel Studs and Nuts
  11. Wheel Emblems, Caps, and Accessories
  12. High Performance Wheels
Tools
  1. Alignment Tools
  2. Battery Chargers and Tenders
  3. Brake Tools
  4. Clutch Alignment Tools
  5. Coil Over Wrenches
  6. Cylinder Head and VANOS Tools
  7. Fan and Fan Clutch Tools
  8. Fault Code Readers and OBD Scan Tools
  9. Fuel System Tools
  10. Genuine BMW Tool Kits
  11. Oil Service Tools
  12. Sockets
  13. Spark Plug Sockets
  14. Transmission and Differential Tools
  15. Wheel Pin Tools
  16. Workshop Chemicals
Clearance
Choose BMW
BMW 1 Series
  1. (E82) 1-series Coupe 2008+
  2. (E88) 1-series Convertible 2008+
BMW 2 Series
  1. (F22) 2-Series Coupe 2014+
  2. (F23) 2-Series Convertible 2014+
  3. (F87) M2 2016+
BMW 3 Series
  1. (E21) 3-Series 1977-1983
  2. (E30) 3-series 1984-1991
  3. (E30) M3 1988-1991
  4. (E36) 3-series 1992-1999
  5. (E36) M3 1995-1999
  6. (E46) 3-Series 1999-2005
  7. (E46) M3 2001-2006
  8. (E90) 3-Series Sedan 2006-2011
  9. (E90) M3 Sedan 2008-2013
  10. (E91) 3-Series Touring 2006-2013
  11. (E92) 3-Series Coupe 2007-2013
  12. (E92) M3 Coupe 2008-2013
  13. (E93) 3-Series Convertible 2007-2013
  14. (E93) M3 Convertible 2008-2013
  15. (F30) 3-Series Sedan 2012+
  16. (F31) 3-Series Touring 2014+
  17. (F80) M3 2015+
  18. (F34) 3-Series Gran Turismo 2014+
BMW 4 Series
  1. (F32) 4-Series Coupe 2014+
  2. (F33) 4-Series Convertible 2015+
  3. (F34) 4-Series Gran Turismo 2014+
  4. (F82) M4 Coupe 2015+
  5. (F83) M4 Convertible 2015+
  6. (F36) 4-Series Gran Coupe 2015+
BMW 5 Series
  1. (E34) M5 1991-1993
  2. (E39) M5 2000-2003
  3. (E60) M5 2006-2010
  4. (E28) 5-Series 1982-1988
  5. (E34) 5-Series 1989-1995
  6. (E39) 5-Series 1996-2003
  7. (E60) 5-Series Sedan 2004-2010
  8. (E61) 5-Series Touring 2006-2010
  9. (F10) 5-Series 2011+
  10. (G30) 5-Series 2017+
BMW 6 Series
  1. (E24) 6-Series 1977-1989
  2. (E63) 6-Series Coupe 2004-2010
  3. (E64) 6-Series Convertible 2004-2010
  4. (F06) 6-Series Gran Coupe 2013+
  5. (F12) 6-Series Coupe 2011+
  6. (F13) 6-Series Convertible 2011+
BMW 7 Series
  1. (E32) 7-Series 1988-1994
  2. (E38) 7-Series 1995-2001
  3. (E65) 7-Series SWB 2002-2007
  4. (E66) 7-Series LWB 2002-2007
  5. (F01) 7-Series SWB 2009+
  6. (F02) 7-Series LWB 2009+
BMW 8 Series BMW Classics (E9, Bavaria, Isetta, etc)
  1. 2500
  2. 2800
  3. 3.0Si
  4. Bavaria
  5. 2800CS
  6. 3.0CS
  7. 2002
  8. 2002tii
  9. (E12) 528i 1977-1981
  10. (E12) 530i 1975-1978
BMW X Series (SAV)
  1. (E84) X1 Series 2013+
  2. (E83) X3 2004-2010
  3. (F25) X3 2011+
  4. (F26) X4 2015+
  5. (E53) X5 2000-2006
  6. (E70) X5 2007-2013
  7. (F15) X5 2014+
  8. (F85) X5 M 2015+
  9. (E71) X6 2008+
  10. (F16) X6 2015+
  11. (F86) X6 M 2015+
  12. (F48) X1 2016+
  13. (F48) X1 (2016+)
BMW Z Series
  1. (E36/7) Z3 1997-2002
  2. (E85) Z4 M Roadster
  3. (E85/E86/E89) Z4 2003+
  4. (E86) Z4 M Coupe
  5. (E52) Z8 2000-2003
BMW 1600-2002 / tii BMW i Series
  1. (I01) BMW i3 2014+
  2. (I12) BMW i8 2014+
MINI Cooper and Cooper S
Racing
Racing Home Racing News Racing Schedule Racing Photo Gallery
Gallery
Photo Gallery Wallpaper Project Cars
  1. Project i8
  2. Project F80 M3
  3. Turner F82 M4
  4. Turner X5 M
  5. Turner F22 2 Series
  6. Turner F13 M6
  7. Turner F10 M5
  8. Turner F30 335i
  9. Turner E9X M3
  10. Turner E92 335i
  11. Turner E82 1 Series
  12. Turner ActiveE (100% Electric)
  13. Turner E46 M3
  14. Turner E46 330i ZHP
  15. Turner E36 M3
  16. Turner E30 M3
  17. Turner MINI Cooper S
  18. McLaren F1
  19. Turner E92 M3 Lime Rock
  20. Turner F80 M3 Silverstone
Video Gallery
Projects
Turner BMW i8 Turner BMW F80 M3 Turner BMW F82 M4 Turner BMW X5 M Turner BMW F22 2 Series Turner BMW F13 M6 Turner BMW F10 M5 Turner BMW F30 335i Turner BMW E9X M3 Turner BMW E92 335i Turner BMW E82 1 Series Turner BMW ActiveE (100% Electric) Turner BMW E46 M3 Turner BMW E46 330i ZHP Turner BMW E36 M3 Turner BMW E30 M3 Turner MINI Cooper S McLaren F1 Turner BMW E92 M3 Lime Rock Turner BMW F80 M3 Silverstone
About Us
About Turner Motorsport Customer Feedback The Turner Team
  1. Open Positions
Returns Policy Shipping Info Contact Us Privacy Policy Security Policy FAQs

BMW E46 Seats & Seat Accessories

BMW E46 Seats & Seat Accessories Whether you're building a track-only speed machine, show car, or ultra-serious street ride the seats can make an awesome upgrade. Aside from the obvious safety considerations with a seat, there are few upgrades that can have more of an impact in your driving experience. Sport or Race seats envelope and grip the driver's body, holding him/her in place even under extreme driving situations. When strapped into a seat with the appropriate harnesses you can become an integrated part of the car. Without the sliding around of stock seats you can have greater confidance and focus on the act of driving. Turner Motorsport is an authorized Recaro dealer and we use them in all of our racecars and high-level tuner project cars. We offer the full range of Recaro tuner and racing seats with mounts and adapters and other accessories.
You're currently viewing parts for your (E46) 3-Series 1999-2005. Reset your chassis
For accurate results, specify your model below.
OMP HTE-R XL Fiberglass Racing Seat -- Black

OMP racing seat with a perforated Fiberglass shell and high protection shoulder and shaped headrest, designed for comfortable driving. Higher side bolsters for lateral leg support. Constructed with fire-resistant Airtex material and velour upholstering.

XL version for taller drivers.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards

Part #: HA/771E
Price: $979.00 (USD) 
Quantity:   
OMP Racing Seat Mounting Bracket - E46 Sedan

This OMP racing seat mounting bracket is made to specifically to secure a racing seat in your E46 Sedan. Using stock mounting points, it eliminates the need to weld or modify your floor in any way. Using stock mounting positions is also safer in that they are proven to hold up by the manufacturer in crash tests when the car is designed. Poorly mounted brackets could cause thin metal to tear, split, or buckle if not properly reinforced, leading directly to injury in critical situations.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Fits:
1999-2005 BMW E46 Sedan

Part #: HC/121
Price: $140.00 (USD) 
Quantity:   
Brey-Krause R-9250 Seat mount - driver

The R-925X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9250 Features

  • Fits seats between 427mm to 440mm wide at the side mount mounting point
  • 7lbs
  • 304 Stainless steel
  • Black wrinkle powder coat finish 
  • Includes provisions for fir extinguisher mount(R-2295)
Part #: R-9250
Price: $179.95 (USD) 
Quantity:   
OMP Steel low brackets - 16 holes | Black Multi hole steel seat bracket in compliance with FIA Appendix J art. 253. New design, minimum 16 different positions. Length: 400 mm Thickness: 3 mm
Part #: HC/922
Price: $89.00 (USD) 
Quantity:   
OMP RS-P.T. 2: Fiberglass Racing Seat | Black

This is an OMP performance RS-PT2 Fiberglass racing seat. The seat internal frame is fiberglass and the entire seat upholstery is velour material. Fiberglass gives strength and light weight and the velour adds to the comfort of the seat. The main backrest pads and leg pad are both exchangeable with different sized pads for a more custom fit. The large shoulder harness slots allow for a variety of driver heights.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Part #: HA/762E
Price: $759.00 (USD) 
Quantity:   
Brey-Krause R-9256 Seat mount - Driver

The R-925X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9256 Features

  • Fits seats between 443mm to 460mm wide at the side mount mounting point
  • 7lbs
  • 304 Stainless steel
  • Black wrinkle powder coat finish 
  • Includes provisions for fir extinguisher mount(R-2295)
Part #: R-9256
Price: $179.95 (USD) 
Quantity:   
Harness Bar - E46 Coupe

This harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking. This bar is easy to install and remove, use only existing holes and mounting points, and will not damage the car in any way.

*For Coupe models only*

Part #: R-1202
Price: $735.00 (USD) 
Quantity:   
OMP WRC-R Fiberglass Racing Seat | Black

This is an OMP performance WRC-R Fiberglass racing seat. The seat shell is molded fiberglass and the seat upholstery is velour and Airtex material. Fiberglass gives strength and light weight and the Airtex increases breathability of the seat. The main backrest pads and leg pad are both exchangeable with different sized pads for a more custom fit. The large shoulder harness slots allow for a variety of driver heights. 

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards

Part #: HA/773E
Price: $799.00 (USD) 
Quantity:   
OMP Racing Seat Mounting Bracket - E46 Coupes

This OMP racing seat mounting bracket is made to specifically to secure a racing seat in your E46 coupe. Using stock mounting points, it eliminates the need to weld or modify your floor in any way. Using stock mounting positions is also safer in that they are proven to hold up by the manufacturer in crash tests when the car is designed. Poorly mounted brackets could cause thin metal to tear, split, or buckle if not properly reinforced, leading directly to injury in critical situations.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Fits:
1999-2005 BMW E46 Coupe

Part #: HC/007
Price: $140.00 (USD) 
Quantity:   
OMP Universal brackets | Silver Universal aluminium brackets for seats with side attachments for Renault R5 >72<84
Part #: HC/666
Price: $89.00 (USD) 
Quantity:   
OMP Sand Racing Steering Wheel - 380mm | Black Polyurethane

Sporty 3-spoke OMP Sand steering wheel in 380mm diameter. Black anodized aluminum center with OMP horn button and black leather rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have slight contours for resting your thumbs to give you more leverage and grip. A steering column hub adapter is required.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Part #: OD/2031
Price: $169.00 (USD) 
Quantity:   
Brey Krause R-9221 Seat mount - passenger

The R-922X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9221 Features

  • Fits seats between 430mm to 460mm wide at the side mount mounting point
  • Uses factory sliders, power or manual 
  • 7lbs
  • 304 Stainless steel
  • Black wrinkle powder coat finish 
  • Includes provisions for fir extinguisher mount(R-2295)

*Note for use with power sliders BMW switch 61311381205 is needed*

Part #: R-9221
Price: $179.95 (USD) 
Quantity:   
Brey-Krause R-9255 Seat mount - Passenger

The R-925X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9255 Features

  • Fits seats between 395mm to 409mm wide at the side mount mounting point
  • 7lbs
  • 304 Stainless steel
  • Black wrinkle powder coat finish 
  • Includes provisions for fir extinguisher mount(R-2295)
Part #: R-9255
Price: $179.95 (USD) 
Quantity:   
OMP WRC-R XL Fiberglass Racing Seat | Black

This is an OMP performance WRC-R Fiberglass racing seat. The seat shell is molded fiberglass and the seat upholstery is velour and Airtex material. Fiberglass gives strength and light weight and the Airtex increases breathability of the seat. The main backrest pads and leg pad are both exchangeable with different sized pads for a more custom fit. The large shoulder harness slots allow for a variety of driver heights.

XL version for taller drivers.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Part #: HA/778E
Price: $819.00 (USD) 
Quantity:   
Seat Sliders - Universal - Recaro If you want fore-aft adjustment on your Recaro seat you will need a set of sliders. These are the genuine Recaro sliders that are some of the finest quality that we have seen. The sliders fit between the vehicle adapter and the seat brackets. There are two types depending on how your floor adapters work - without tabs and with tabs.

Recaro Seat Slider types -
Without Tabs - offers the lowest possible seating position - the total height of the sliders is 22mm (7/8"); the sliders are sandwiched between the floor mount and seat; the bolts install to the floor mount perpendicular to the ground; works with flat Macht Schnell or VAC style floor mounts only.
With Tabs - the sliders have tabs on each end with three height positions; the positions allow height and rake adjustments but means it's taller than the version without tabs - total height with the tabs is 58mm (2.25"); the tabs mean the mounting bolts install parallel to the ground; some floor mounts require the tab style (Wedge Engineering for example).

The Recaro sliders are all steel - pulling the handle moves teeth on two tracks which is more secure and stable than a single track. This set of sliders has the bar on the inside of the track (the most common for BMW fitments).

Sold per seat.
Part #: 0.70.X
Price: $135.00 (USD) 
Brey Krause R-9220 Seat mount - Driver

The R-922X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9220 Features

  • Fits seats between 430mm to 460mm wide at the side mount mounting point
  • Uses factory sliders, power or manual 
  • 7lbs
  • 304 Stainless steel
  • Black wrinkle powder coat finish 
  • Includes provisions for fir extinguisher mount(R-2295)

*Note for use with power sliders BMW switch 61311381205 is needed*

Part #: R-9220
Price: $179.95 (USD) 
Quantity:   
OMP Racing Seat Lumbar Cushion | Medium - Black If additional lower back support is needed for those extra long days in the racing seat, OMP offers the Racing Seat Lumbar Cushion. Measuring in at 10" by 8" by 3", it is fastened to the velour fabric of the seat with Velcro strips, it can be adjusted to exactly where you need it. The pad itself is covered with the same velour flame-retardant material as the seat and is embroidered with an OMP logo.
Part #: HB/662
Price: $49.00 (USD) 
Quantity:   
OMP TRS-E: Tubular Racing Seat | Black

This is an OMP performance TRS-E tubular racing seat. The seat internal frame is tubular steel and the entire seat upholstery is velour material. Tubular steel ensures strength and protection and the velour adds to the comfort of the seat. The leg pad is removable for a more individual fit. The large shoulder harness slots allow for a variety of driver heights.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Part #: HA/741E
Price: $389.00 (USD) 
Quantity:   
Brey-Krause R-9253 Seat mount - Passenger

The R-925X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9255 Features

  • Fits seats between 410mm to 426mm wide at the side mount mounting point
  • 7lbs
  • 304 Stainless steel
  • Black wrinkle powder coat finish 
  • Includes provisions for fir extinguisher mount(R-2295)
Part #: R-9253
Price: $179.95 (USD) 
Quantity:   
OMP TRS-E XL: Tubolar Racing Seat | Black

This is an OMP performance TRS-E tubular racing seat. The seat internal frame is tubular steel and the entire seat upholstery is velour material. Tubular steel ensures strength and protection and the velour adds to the comfort of the seat. The leg pad is removable for a more individual fit. The large shoulder harness slots allow for a variety of driver heights.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Part #: HA/781E
Price: $409.00 (USD) 
Quantity:   
OMP Steel tall brackets | Black Steel brackets for side mounted seats. High model. 400 mm lenght x 3 mm thick
Part #: HC/731E
Price: $79.00 (USD) 
Quantity:   
OMP Alluminum tall brackets - 36 holes | Black Multi hole aluminium seat bracket in compliance with FIA Appendix J art. 253. New design, minimum 36 different positions. Length: 495 mm Thickness: 6 mm
Part #: HC/925
Price: $185.00 (USD) 
Quantity:   
OMP Racing Seat Cushion for HRC Air Cooling Kit | Black Made for the OMP Air cooing Kit for the HRC racing seats, this seat padding is perforated to allow air to pass through from the cooling kit, keeping you cool and sweat free.
Part #: HB/703
Price: $103.00 (USD) 
Quantity:   
OMP HTE-R Carbon Fiber XL Racing Seat -- Black

OMP racing seat with a perforated Carbon fiber molded shell and high protection shoulder and shaped headrest, designed for comfortable driving. Higher side bolsters for lateral leg support. Constructed with fire-resistant Airtex material and velour upholstering. Shell is predrilled to allow cooling kit installation.

XL version for taller drivers.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards

Part #: HA/779E
Price: $2649.00 (USD) 
Quantity:   
OMP HRC-R-AIR: Carbon Racing Seat - Black - Special Order

OMP HRC-D Premium Quality Carbon Fiber seat with head and shoulder containment with a design to allow installation and comfort in GT cars with little room. Air cooling kit installed with perforated back cushion.

*Made to order, extended wait and shipping times may occur.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Part #: HA/786
Price: $3990.00 (USD) 
Quantity:   
Side Mounts - Macht Schnell for Recaro Seats Racing and aftermarket seats require a mount to attach the seat to sliders or an adapter plate for the car. Most Recaro race seats are 'side-mount' which means the brackets attach to the side of the seat and then turn 90 degrees to mount to the floor (or sliders). These are made by Macht Schnell and made from steel for great strength and low cost. Sold as a pair to fit one seat. Fits the Recaro Pole Position, Profi, Profi XL, and Pro Racer seats.
Part #: 79.20.110B
Price: $125.00 (USD) 
Racing Seat Belt Harness Retaining Guide Collars (Pair) These little guys are one of our favorite final touches on a race car build. After years of requests, we now are able to supply these for more than just our race team's use. These aluminum collars bolt on your roll cage's harness bar (or any bar for that matter) and help keep your seat belt harnesses from sliding on the bar. You can use just one pair to accomplish this, or 2 pairs (4 collars total) for the best looking and functioning install. The beauty of these collars (besides being lightweight and looking clean) is that they can be adjusted from side to side, which is convenient if you change you seat or belt configuration. They can also be used for other applications as well, such as taming that helmet net strap. If you're looking for a clean, professional looking solution, these are a superb final touch. As used on our own Championship winning TMS E46 and E90 race cars.

We offer these guide collars in two sizes: for 1.5" OD roll bar tubing or for 1.75" OD roll bar tubing (choose your size below). Check your cage tubing diameter especially if your car was built in Europe as they used metric tubing sizes. If you need a metric size, contact us. Also measure with paint applied, not bare tubing. These are sold by the pair, so be sure to modifying your quantity below (or in the cart) if you need them for both seats.
Part #: TIN9903150
Price: $39.95 (USD) 
Seatbelt 6-point Race Harness Receptacles - Macht Schnell Many racing series and event organizers are requiring 5 or 6-point harnesses in their events now. Attaching the anchor points to the seat base is a desired alternative to drilling holes in your floor and carpet*. This set includes the 6-point anchor to attach to the Macht Schnell floor mount as well as side attachments for either a bolt-in or snap-in harness.

* - note that most racing harness manufacturers will advise that drilling through the floor is the best method for mounting harnesses. This allows you to locate the mount in the ideal location and angle to fit your driving position. The proper installation is paramount to ensure the harness works correctly in an impact.

Sold per seat.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
1992-1998 E36 BMW 318i 318is 318ti 323is 325i 325is 328i 328is M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 (not convertibles)
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
Part #: 79.20.150K
Price: $174.00 (USD) 
OMP WRC Racing Seat Split Seat Cushion | Black Designed for the WRC racing seats from OMP, these cushions will add tons of comfort and fit perfectly, attaching with simple Velcro strips.  These 2 individual  cushions are both covered in the AIRTEX® material for additional breathability.
Part #: HB/700
Price: $60.00 (USD) 
Quantity:   
OMP Racing Seat Leg Cushion | Black If additional leg support is needed for those extra long days in the racing seat, OMP offers the Racing Seat Leg Cushion. Measuring in at 13" by 8.5" by 3.5", it is fastened to the velour fabric of the seat with Velcro strips. The pad itself is covered with the same velour flame-retardant material as the seat and is embroidered with an OMP logo.
Part #: HB/693
Price: $65.00 (USD) 
Quantity:   
OMP HRC Fiberglass Air Racing Seat -- Black

OMP racing seat with a fiberglass shell and high protection shoulder and head containment, designed for comfortable driving. Constructed with fire-resistant airnet and velour upholstering. Fiberglass shell is predrilled to allow cooling kit installation.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Part #: HA/793
Price: $999.00 (USD) 
Quantity:   
Seatbelt 3-point Receptacle - Macht Schnell Adding seats and keeping your stock 3-point belt? You're going to need this set of brackets to attach the old belt receptacle to the new floor mount. Nearly all BMW seats have the inboard belt buckle attached to the seat. So you will need to remove that buckle and transfer it to your new floor bracket. If you're using the Macht Schnell floor brackets these plates mount in between the sliders and seat. They are made from thick steel then powedercoated in stealthy black. These are sold as a pair to fit one seat and the Macht Schnell floor mounts (may require modification for use on other brand floor mounts). Fits most coupe or sedan models from 1992-2012, including E36, E46, E82, E9X, and Z4 models.

Sold per seat.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
1992-1998 E36 BMW 318i 318is 318ti 323is 325i 325is 328i 328is M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 (not convertibles)
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
Part #: 79.12.12X
Price: $112.50 (USD) 
$125 (Sale - Save 10%)
HARD Motorsport Rear Seat Bulkhead Delete Panel - BMW E46 Coupe

HARD Motorsport Rear "Seat Delete" Bulkhead filler panel is perfect for sealing your cabin from the trunk when gutting your vehicles of heavy rear seats. Fitting most applications, this panel is the closest option to a drop in part you can find. For vehicles with safety cages, only a small bit of modification is necessary for perfect fitment.

Product Features:

  • .040 Laser Cut Aluminum - Light weight
  • Powdercoated finish
  • Bead rolled for strength
  • Direct fitment for BMW 2 door Coupe.

 

Fits the following vehicles:

E46 BMW All coupe sub-models including the M3

Part #: HARD.E46.RSEAT
Price: $168.95 (USD) 
Free Shipping Free Shipping
Quantity:   
OMP WRC-R CARBON: Carbon Fiber Racing Seat | Black

This is an OMP performance "WRC-R Carbon" carbon fiber racing seat. The seat shell is autoclave molded carbon fiber and the seat upholstery is velour and Airtex material. Carbon fiber gives strength and light weight and the Airtex increases breathability of the seat. The main backrest pads and leg pad are both exchangeable with different sized pads for a more custom fit. The large shoulder harness slots allow for a variety of driver heights.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards

Part #: HA/769E
Price: $2249.00 (USD) 
Quantity:   
OMP Steel tall brackets - 36 holes | Black Multi hole steel seat bracket in compliance with FIA Appendix J art. 253. New design, minimum 36 different positions. Length: 495 mm Thickness: 3 mm
Part #: HC/923
Price: $99.00 (USD) 
Quantity:   
OMP Racing Seat Head cushion for WRC and HRC Seats | Black This cushion designed specifically for the WRC and HRC racing seats is a simple addition that adds safety, comfort, and support. It attaches with just two straps to the top of the racing seat and is covered in the same velour fabric as the racing seat itself. A white OMP logo is embroidered in the top half of the cushion to match the design of the seat.
Part #: HB/699
Price: $60.00 (USD) 
Quantity:   
OMP Steel low brackets | Black Steel brackets for side mounted seats. Low model. 350 mm length x 3 mm thick.
Part #: HC/733E
Price: $69.00 (USD) 
Quantity:   
Seat Shims - Macht Schnell Seat Shim Set Often when installing race seats there is a gap between your seat shell to your side brackets. Or maybe you want to shim your seat to one side for a better driving position. These aluminum spacer shims are the perfect solution. They come in a satin black anodize for a stealthy look and include longer hardware in a handy low-profile rounded head.

Included in this set:
2 x 14mm shims with correct extended bolts
4 x 9mm shims with correct extended bolts
2 x 5mm shims with correct extended bolts
4 x washers

These are the ideal finishing touch to your seat install and the preferred method instead of using unsightly washers.

Turner Tip: Positioning the seat close to the transmission tunnel can make it extremely difficult to attach an Allen socket/ratchet. And the Allen socket has to be firmly seated or it will strip the head. We will often use hex bolts on the inside seat locations because it is so much easier. Just make sure you get a hex that is the same grade as the original seat hardware.
Part #: TMS25774
Price: $59.00 (USD) 
Quantity:   
Brey-Krause R-9254 Seat mount - Driver

The R-925X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9254 Features

  • Fits seats between 395mm to 409mm wide at the side mount mounting point
  • 7lbs
  • 304 Stainless steel
  • Black wrinkle powder coat finish 
  • Includes provisions for fir extinguisher mount(R-2295)
Part #: R-9254
Price: $179.95 (USD) 
Quantity:   
Seat Floor Adapters - E36, E46, E85 - Macht Schnell In order to mount aftermarket seats in your car, you need a floor mount adapter. These high-quality aluminum adapters are made by Macht Schnell. These bolt to your existing seat mounting studs in the floor and offer the lowest profile of any floor mount (22mm height). This helps to keep your seat at the lowest position possible. Your seat adapters or sliders bolt to this adapter plate. These floor mounts are a matrix style with rows of threaded holes that allow you to find an ideal seat location. There are other options - including homemade - but these seat brackets for your BMW are the highest quality to match your expensive seats.

Sold per seat. Can be used on left or right sides of vehicle.

These adapters were originally designed for the E46 chassis. They can fit the E36 by modifying the mounting holes to match the bolt and stud locations on the E36 floor.

This item fits the following BMWs:
1995-1999 E36 BMW 318i 318is 318ti 318i 323is 323i 325i 325is 325i 328i 328is 328i M3 (except convertibles) ( see note above )
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 (except convertibles)
2003-2008 E85 E86 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
Part #: TMS21542
Price: $225.00 (USD) 
Free Shipping Free Shipping
Quantity:   
Brey-Krause R-9251 Seat mount - Passenger

The R-925X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9251 Features

  • Fits seats between 427mm to 440mm wide at the side mount mounting point
  • 7lbs
  • 304 Stainless steel
  • Black wrinkle powder coat finish 
  • Includes provisions for fir extinguisher mount(R-2295)
Part #: R-9251
Price: $179.95 (USD) 
Quantity:   
OMP HSC Patent Harness Height Adjuster | Pair

Racing harnesses can become uncomfortable due to the height or angle that they sit. With this HSC Harness Height Adjuster, you will be able to adjust your harness between 3 different setting for optimal fitment and comfort. This is a great option for drivers of shorter or taller heights.

Works with racing seats that are HSC Patent Compatible.

Part #: HC/893
Price: $239.00 (USD) 
Quantity:   
OMP HRC-D: Carbon Large Racing Seat - Black

OMP HRC-D Premium Quality Carbon Fiber seat with head and shoulder containment with a design to allow installation and comfort in GT cars with little room.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Part #: HA/788
Price: $2990.00 (USD) 
Quantity:   
Brey-Krause R-9257 Seat mount - Passenger

The R-925X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9257 Features

  • Fits seats between 443mm to 460mm wide at the side mount mounting point
  • 7lbs
  • 304 Stainless steel
  • Black wrinkle powder coat finish 
  • Includes provisions for fir extinguisher mount(R-2295)
Part #: R-9257
Price: $179.95 (USD) 
Quantity:   
OMP Cromo Racing Steering Wheel -- 350mm | Black Leather

Sporty 3-spoke OMP Cromo steering wheel in 350mm diameter. Chrome aluminum center with OMP horn button and black leather rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have contours for resting your thumbs to give you more leverage and grip. The grip itself is textured at the 9 and 3 positions for extra control of the steering wheel. The 350mm size is on the small size compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Part #: OD/2018
Price: $119.00 (USD) 
Quantity:   
Brey-Krause R-9252 Seat mount - Driver

The R-925X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9252 Features

  • Fits seats between 410mm to 426mm wide at the side mount mounting point
  • 7lbs
  • 304 Stainless steel
  • Black wrinkle powder coat finish 
  • Includes provisions for fir extinguisher mount(R-2295)
Part #: R-9252
Price: $179.95 (USD) 
Quantity:   
Seat Floor Adapters - E36, E46, E85 - Macht Schnell In order to mount aftermarket seats in your car, you need a floor mount adapter. These high-quality aluminum adapters are made by Macht Schnell. These bolt to your existing seat mounting studs in the floor and offer the lowest profile of any floor mount (22mm height). This helps to keep your seat at the lowest position possible. Your seat adapters or sliders bolt to this adapter plate. These floor mounts are a matrix style with rows of threaded holes that allow you to find an ideal seat location. There are other options - including homemade - but these seat brackets for your BMW are the highest quality to match your expensive seats.

Sold per seat. Can be used on left or right sides of vehicle.

These adapters were originally designed for the E46 chassis. They can fit the E36 by modifying the mounting holes to match the bolt and stud locations on the E36 floor.

This item fits the following BMWs:
1995-1999  E36 BMW  318i 318is 318ti 318i 323is 323i 325i 325is 325i 328i 328is 328i M3 (except convertibles) ( see note above )
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 (except convertibles)
2003-2008  E85 E86 BMW  Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
Part #: 79.10.101B
Price: $225.00 (USD) 
Free Shipping Free Shipping
Quantity:   
OMP Racing Seat Helmet Protection Cushions | Black Keeping your helmet steady during a race is important for comfort, safety, and coordination. OMP helmet protection cushions are an easy addition to help keep your head and helmet from rocking too far to either side. These cushions attach to the velour fabric covering the existing helmet supports with Velcro straps. The cushions are covered in the same velour fabric with the same flame-retardant qualities. In the center of each cushion is an embroidered OMP logo.
Part #: HB/697
Price: $49.00 (USD) 
Quantity:   
OMP ARS-R CARBON: Carbon Fiber Racing Seat | Black - Special Order

This is an OMP performance "ARS-R Carbon" carbon fiber racing seat. The seat shell is autoclave molded carbon fiber and the seat upholstery is velour and Airtex material. Carbon fiber gives strength and light weight and the Airtex increases breathability of the seat. The main backrest pads and leg pad are both exchangeable with different sized pads for a more custom fit. The large shoulder harness slots allow for a variety of driver heights.

*Made to order, extended wait and shipping times may occur.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards

Part #: HA/770E
Price: $2199.00 (USD) 
Quantity:   
OMP TRS-E PLUS Tubular Racing Seat | Black with White Stripes

This is an OMP performance TRS-E tubular racing seat. The seat internal frame is tubular steel and the entire seat upholstery is vinyl material. Tubular steel ensures strength and protection and the vinyl adds to the comfort and style of the seat. The leg pad is removable for a more individual fit. The large shoulder harness slots allow for a variety of driver heights.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Part #: HA/744E
Price: $399.00 (USD) 
Quantity:   
OMP Asso Racing Steering Wheel -- 350mm | Black Leather

Sporty 3-spoke OMP Asso steering wheel in 350mm diameter. Matte aluminum center with OMP horn button and black leather rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have contours for resting your thumbs to give you more leverage and grip. The 350mm size is on the small size compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Part #: OD/2019
Price: $119.00 (USD) 
Quantity:   
OMP Racing Seat Base Cushion | Black Racing seats can become uncomfortable as the thin padding of the seat begins to compress. If you're planning on sitting in the seat for any extended periods of time, a base cushion is the perfect addition. This OMP seat cushion is 1.5" of firm, but comfortable and supportive, foam that attaches to the velour seat fabric using Velcro strips. The seat cushion is covered in black velour fabric that is flame-retardant and has an OMP logo embroidered in the center. The cushion is 13" long and 11" wide.
Part #: HB/695
Price: $65.00 (USD) 
Quantity:   
OMP Air blower for Air Cooling Kit

Air Blower with rubber adapter for Air Cooling Kit (HC/913). This forces the air into the kit to keep the driver cool during long races in hot conditions.

The blower (HC/914/V) and the adapter (HC/914/R) are also available as spare parts.

Part #: HC/914
Price: $129.00 (USD) 
Quantity:   
OMP CHAMP-R: Fiberglass Racing Seat | Black

This is an OMP performance CHAMP-R Fiberglass racing seat. The seat shell is fiberglass and the seat upholstery is velour material. Fiberglass gives strength and light weight and the velour adds to the comfort of the seat. The main backrest pads and leg pad are both exchangeable with different sized pads for a more custom fit. The large shoulder harness slots allow for a variety of driver heights.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Part #: HA/766E
Price: $659.00 (USD) 
Quantity:   
OMP HTE-R 400 Fiberglass Racing Seat -- Black

OMP racing seat with a perforated Fiberglass shell and high protection shoulder and shaped headrest, designed for comfortable driving while still being able to be used in an area with restricted room in the upper cabin area. Medium-high side bolsters for lateral leg support. Constructed with fire-resistant Airtex material and velour upholstering.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards

Part #: HA/780E
Price: $979.00 (USD) 
Quantity:   
OMP HRC Fiberglass Air XL Racing Seat -- Black

OMP racing seat with a fiberglass shell and high protection shoulder and head containment, designed for comfortable driving. Constructed with fire-resistant airnet and velour upholstering. Fiberglass shell is predrilled to allow cooling kit installation.

This is the XL version - higher and larger than standard seat for drivers taller than 5' 10".

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Part #: HA/794
Price: $1059.00 (USD) 
Quantity:   
OMP HTE-R Fiberglass Racing Seat -- Black

OMP racing seat with a perforated Fiberglass shell and high protection shoulder and shaped headrest, designed for comfortable driving. Higher side bolsters for lateral leg support. Constructed with fire-resistant Airtex material and velour upholstering.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards

Part #: HA/772E
Price: $959.00 (USD) 
Quantity:   
OMP Racing Seat cushion for HTE | Black Made specifically for the OMP HTE racing seat, this support cushion is covered with the same AIRTEX® material for both style and high breathability, perfect for extra long track days! This pad attaches to the seat using simple Velcro strips.
Part #: HB/698
Price: $75.00 (USD) 
Quantity:   
OMP FIRST-R: Fiberglass Racing Seat | Black - Special Order

This is an OMP performance RS-PT2 Fiberglass racing seat. The seat internal frame is fiberglass and the entire seat upholstery is velour material. Fiberglass gives strength and light weight and the velour adds to the comfort of the seat. The main backrest pads and leg pad are both exchangeable with different sized pads for a more custom fit. The large shoulder harness slots allow for a variety of driver heights.

*Made to order, extended wait and shipping times may occur.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Part #: HA/790
Price: $549.00 (USD) 
Quantity:   
OMP Seat Sliding bracket Sliding rail kit to be mounted between the seat mount and the seat.
Part #: HC/665
Price: $69.00 (USD) 
Quantity:   
OMP HTE-R Carbon Fiber Racing Seat -- Black

OMP racing seat with a perforated Carbon fiber molded shell and high protection shoulder and shaped headrest, designed for comfortable driving. Higher side bolsters for lateral leg support. Constructed with fire-resistant Airtex material and velour upholstering. Shell is predrilled to allow cooling kit installation.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards

Part #: HA/768E
Price: $2549.00 (USD) 
Quantity:   
OMP Racing GP Racing Steering Wheel -- Black Polyurethane

Sporty 3-spoke OMP Racing GP steering wheel in 330mm diameter. Anodized aluminum center with OMP horn button and black leather-like polyurethane rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have contours for resting your thumbs to give you more leverage and grip. The grip itself is textured at the 9 and 3 positions for extra control of the steering wheel. The 330mm size is on the small size compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Part #: OD/1981
Price: $119.00 (USD) 
Quantity:   
Brey Krause R-9222 Seat mount - Driver

The R-922X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9222 Features

  • Fits seats between 365mm to 429mm wide at the side mount mounting point
  • Uses factory sliders, power or manual 
  • 7lbs
  • 304 Stainless steel
  • Black wrinkle powder coat finish 
  • Includes provisions for fir extinguisher mount(R-2295)

*Note for use with power sliders BMW switch 61311381205 is needed*

Part #: R-9222
Price: $179.95 (USD) 
Quantity:   
OMP Racing Seat Lumbar Cushion | Small - Black If additional lower back support is needed for those extra long days in the racing seat, OMP offers the Racing Seat Lumbar Cushion. Measuring in at 10" by 5" by 2", it is fastened to the velour fabric of the seat with Velcro strips, it can be adjusted to exactly where you need it. The pad itself is covered with the same velour flame-retardant material as the seat and is embroidered with an OMP logo.
Part #: HB/692
Price: $40.00 (USD) 
Quantity:   
OMP ARS-R CARBON: Fiberglass Racing Seat | Black - Special Order

This is an OMP performance ARS-R Fiberglass racing seat. The seat shell is molded fiberglass and the seat upholstery is velour and Airtex material. Fiberglass gives strength and light weight and the Airtex increases breathability of the seat. The main backrest pads and leg pad are both exchangeable with different sized pads for a more custom fit. The large shoulder harness slots allow for a variety of driver heights.

*Made to order, extended wait and shipping times may occur.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Part #: HA/774E
Price: $759.00 (USD) 
Quantity:   
Brey Krause Variable width Fire Extinguisher Mount

Allows mounting of any variable width extinguisher mount, for use with seats 380-440mm wide 

For use with R-924X, R-925X, R-926X, R-928X Series side mounts 

Part #: R-2295
Price: $89.25 (USD) 
Quantity:   
Side Mounts - Motion Motorsport Slotted Motion Motorsport takes the struggle out of centering your race seat with their exclusive SLOTTED side bracket mounts. These side mounts bolt to your seat shell just like any other side mount. But the bottom bolts to your sliders or floor mount through their innovative slotted inserts. There's no more re-drilling or hogging out holes to get everything to line up. Loosely install the brackets, center your seat, then tighten the screws on the brackets. You won't have to pull the seat in and out while you make tiny adjustments. The rotating slotted design allows the brackets to 'float' into the position you want. And once tightened they will not move or come out of position. These brackets have been thoroughly tested with all FIA-spec seats for bolt spacing, most common seat sliders, and compatible with matrix-style and other floor mount designs. The aluminum material meets or exceeds all FIA recommendations and are powdercoated in matte black.

One other trick feature is the driver and passenger specific offsets to the brackets. The bends are made to place the seat as close to the transmission tunnel as possible (also dependent on floor mount design). Most other side mounts are universal and actually the same piece flipped around with the proper holes drilled. But this does not offset the seat at all and you can end up with an annoying offset from the center of the seat to the steering wheel. Choose from a driver's or passenger's side bracket set below.

Price is for one pair of side mounts.
Part #: MM-SIDE-
Price: $129.95 (USD) 
Brey Krause R-9223 Seat mount - Passenger

The R-922X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9223 Features

  • Fits seats between 365mm to 429mm wide at the side mount mounting point
  • Uses factory sliders, power or manual 
  • 7lbs
  • 304 Stainless steel
  • Black wrinkle powder coat finish 
  • Includes provisions for fir extinguisher mount(R-2295)

*Note for use with power sliders BMW switch 61311381205 is needed*

Part #: R-9223
Price: $179.95 (USD) 
Quantity:   
Recaro Profi XL Race Seat The best all-around Recaro race seat. The Profi line of seats are fixed-back fiberglass with slots for racing harnesses. It's fully FIA approved which makes it suitable for nearly all ranges of racing series or for a track-only car. The sizing and shape of this seat makes it suitable for drivers of all shapes and sizes. This is the larger XL seat that is over one inch larger in the torso area than the standard Profi SPG seat. This is a side-mount design and requires side mount brackets and vehicle-specific floor adapter. Sliders and additional seat cushions optional.

Seat Specs:
Shell Materialfiberglass-reinforced plastic
fabric materialvelour
fabric colorsblack, red
logo colorwhite or black depending on seat color
harness guidesYes for 4, 5, or 6 point
seat mountside mount, not included
slidersnot included
chassis mountsnot included
Part #: TMS340420
Price: $1099.00 (USD) 
Seat Floor Adapters with Sliders - E46 - Recaro OEM Recaro makes their own floor adapter and slider kit for some BMW models. This is the most complete and OEM-like way of installing a Recaro street (bottom-mount) seat in your car.

Each Recaro kit comes with a floor mount adapter specific and correct for the chassis. In some cases they even use an OE BMW seat frame. The kit also includes Recaro sliders to bolt to the floor mount and brackets for re-mounting your original seatbelt receptacle. Your bottom mount seat then bolts to the sliders. All hardware and instructions are included. On some models additional trim is also included to hide the sliders and brackets and make for a more factory OEM appearance.

Note about fitment: the Recaro adapters tend to be higher than a Macht Schnell or other 'matrix' style floor mount designs. In most cases the Recaro is over one inch taller. This owes in part because Recaro builds additional room for the feet of rear seat passengers and in some cases they use the OE seat frame. If you're an above average height or want the seats to be as low as possible, the Macht Schnell floor mounts would be a better option.

Sold per seat. Choose Left or Right in the options list below.

This item fits the following BMWs:
1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 except convertible models
Part #: TMS174114
Price: $375.00 (USD) 
OMP Alluminum low brackets - 16 holes | Black Multi hole aluminium seat bracket in compliance with FIA Appendix J art. 253. New design, minimum 16 different positions. Length: 400 mm Thickness: 6 mm
Part #: HC/924
Price: $149.00 (USD) 
Quantity:   
Get notified about money saving
specials & deals for your BMW
enter your email address
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook




    • 1-800-280-6966
      Mon-Thur 9am-6pm ET, Fri 9am-5pm ET

      • © TurnerMotorsport.com 1993-2017. All Rights Reserved.